PROVN OF RCC RETAINING WALL NEAR ADM GATE, WASHING PLATFORM FOR MECHANICAL TRANSPORT AND MT DRIVERS STANDBY/ CHANGE ROOM ALONGWITH TOILET IN THE AOR OF AGE B/R-II UNDER GE 969 EWS

Amount

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc.or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out hard/dense soil, all as specified.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out hard/ dense soil complete all as specified and directed.

M&L for PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc all as specified and directed.

M&L for hard-core of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified.

M&L for walling of random rubble uncoursed well bonded solidly hearted built in CM 1:4 etc all as specified and directed .

M&L plain cement concrete 1:4:8 type D-2, (using 40mm graded stone aggregate), in foundation, filling and mass concrete complete all as specified and directed.

M&L 100mm thick cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in sub base of floors, finished even and fair over well/ rammed / compacted earth complete all as specified.

M&L for 75mm thick cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in sub base of floors, finished even and fair over well/ rammed/ compacted earth complete all as specified.

M&L for providing cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in coping etc all as specified and directed.

M&L for use & waste of fair finished flat formwork to surfaces of concrete, form work to sides of plinth beam, footings, bases of columns etc complete all as specified and directed.

M&L machine pressed rubber moulded coloured precast concrete interlocking paver block (PU COATED) any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20mm graded stone aggregate as in foundation footing, plinth beam, bases for columns etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on on stone masonry surfaces or surface other than fair face of brick-work on one side of lathing including finishing to surfaces even and smooth without using extra cement etc all as specified and directed.

S&F for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade with grey cement and pigment complete all as specified and directed.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n. exc 40mm to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto course for lime or sand stone, all as specified.

M&L cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as directed

M&L for extra stone walling for hammer dressing in faces stones of random rubble walling uncoursed for granite or trap stone etc all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for use & waste of fair finish square or rectangle shape formwork to sides of pillars, posts , struts, piers, columns etc complete all as specified and directed.

M&L flush pointing in cement mortar 1:4 to random rubble masonry, uncoursed or brought upto courses all as specified and directed.

M&L for cement concrete 1:3:6, type C2 (using 40mm graded stone aggregate) as in surface channel and drains all as specified and directed.

M&L for RCC M-25 (design mix) using 20mm graded aggregate as in columns etc complete all as specified and directed.

Hand packing (any thickness) at back of walls over arches(Broken stone or boulders) etc and raising (or lowering) to the required level complete all as specified and directed.

M&L for 100mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in floor and finishing the concrete surfaces even and smooth without using extra cement complete all as specified.

M&L for use & waste of fair finished flat formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in benching, bed plates, coping and the like including necessary formwork and finishing all exposed surface of concrete as per clause 4.11.16.2(a) & (d) of SSR Part-I., all as specified.

M&L for RCC M-25 (design mix) using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Extra for forming fair finished drain channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc all as specified and directed.

M&L for polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m complete all as specified.

M&L for use & waste of fair finished flat formwork to chullah hoods, chajjas, troughs and similar items including edges etc complete all as specified and directed.

M&L pre cast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) set in cement mortar 1:6 in bond stone for stone masonry and the like including necessary formwork, all as specified.

M&L for RCC M-25 (design mix) (using 20mm graded stone aggregate) as in chajjas complete all as specified and directed.

M&L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L TMT bars 10mm dia and over cut to length, bend to shape required including cranking, bending spirally for hookings for coils, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10mm dia cut to length, bent to shape required , including cranking, bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips in stirrups, spacers and binders complete all as specified and directed.

Returning filling in including spreading levelling, watering and well ramming in layers n exc 25 cm all as specified.

Removing of excavated soil not exc 50m and depositing where directed at a level not exc 1.5 M above the starting point, all as specified.

Supply and spreading clean by sand in trenches for cushioning all as specified for cable protection complete all as directed. Note: The punned down thickness shall be measured.

M&L brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

Supply and laying sub class 'B' bricks laid across the cable for cable protection complete all as specified.

M&L rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified.

M&L rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces with using integral waterproofing compound @ 2% by weight of cement including finishing the surface even and smooth without using extra cement complete all as specified. Note - W P C shall be measured and paid separately.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified.

M&L for preparing newly plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whitening complete all as specified.

M&L for 75mm thick cement concrete 1:4:8 type D-2, (using 40 mm graded stone aggregate) in sub base of flooring, all as specified.

M&Lfor vitrified ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for non skid coloured printed ceramic tile 8 to 10 mm thick (Square/rectangular/in joint less) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed in CM 1:4, all as specified.

M&L for glazed ceramic tiles in vertical surface 600x300x10 mm thick colour and design (as approved) in vertical surface and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over 15 mm thick cement plaster using CM 1:4 complete all as specified and directed.

S&F roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe-290 (Gde E-165) complete all as specified.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified.

M&L for pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws, all as specified

S&F 2nd class soft (kail) wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

S&F 35mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faes. The size of rail and stile (second class hardwood) as per IS-1003 (part-I), kiln seasoned and chemically pressure treated , as directed as specified and directed.

S&F 2nd class soft wood (kail) factory made glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkhats, all as specified.

S&F factory made PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part I, complete all as specified.

S&F factory made solid PVC moulded door shutter 28 to 30 mm the (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part I, 2009 all as specified.

S&F formwork to rough finished surfaces edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified.

S&F FRP Rotex PUF insulation tank 1000 ltr capacity consists of outer layer of tank white in colour made up of virgin FRP, inner layer of tank white in colour made up of virgin LLDP/HDPE, in middle of both the layers polyurethane fome (PUF) of 50 mm thick, including inlet along with float valve, outlet, overflow provision and tank lid with a suitable locking system complete all as specified and directed.

S&F 15mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor, all as specified.

S&F formwork fair finished flat to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) complete all as specified.

S&F 20 mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor, all as specified.

S&F formwork to rough finished surfaces sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified.

S&F towel rail 450mm long of PTMT fixed with and including chromium plated brass screw and wooden/ plastic cleats (minimum weight 170 gms), all as specified.

M&L lagging to 20mm/15mm bore pipe exposed PPR /GI tubing all around (including provisions of lagging on pipe fitting i.e, unions, elbows, nipples, tees etc) with 40mm thick bonded mineral wood performed 'SNAP ON' pipe section of density 144 Kg/Cum confirming to IS-9842 with chicken mesh wire netting 25 gauge, 20mm mesh with 0.01 mm aluminium foil complete all as specified and directed.

S&F,vitreous china squatting pan of Orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern (including fixing of flush pipe) including provision of cement concrete bedding, complete all as specified and as directed.

S&F, vitreous china ware wash hand basin white of size 550 x 400mm including CP waste coupling and PVC waste pipe and MS steel brackets all as specified and directed

S&F 15mm fancy type chromium plated angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed, all as specified.

S&F ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 15mm bore dia of pipe, all as specified.

S&F PVC SWR floor trap of 75 mm outlet plain with grating including jointing to waste pipe and fixed with solvent cement, cement concrete 1:2:4 B1, all as specified.

S & F 75 mm bore PVC (SWR) pipes single socked, in any length with rubber ring joints, laid in trenches or in floors complete, all as specified and directed.

S&F PVC (SWR) bends of bore 75mm complete all as specified.

M&L 110 mm dia PVC (SWR) Pipe single socketed in any length with rubber joints laid in trenches or in floors, all as specified.

M&L for 25mm thick damp proof course in cement concrete 1:2:4, type B-0 (with water proofing compound) on horizontal or vertical surfaces including necessary formwork complete all as specified and directed. Note: WPC shall be measured and paid separately.

S&F PVC (SWR) bends of bore 110mm, complete all as specified.

S&F 15mm bore CP Bib taps, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron or brass ferrule and fixed but fancy type complete, all as specified.

S&F 15mm bore pillar tap fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked ,complete all as specified & directed.

S&F flushing cistern PVC, low level of capacity 10 ltr, white, valve less symphonic action type complete with inlet ball valve float and handle or push button type including brackets, and PVC connection (15mm size with PTMT nuts of length 450mm complete) all as specified & directed.

S&F in repair vitreous china urinal, full stall type coloured/white complete fixing with suitable fixing arrangements to wall with and including CP urinal spreader, CP domed waste coupling and waste pipe complete, all as directed.

M&L granite (of any type)18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified.

Rounding to edges of granite/stone slabs one edge, such as in steps, cooking platform, and other similar situations, all as specified.

M&L soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonry in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes RCC/DWC complete filled with brick bats of size 2.4 M dia X 3.0 M effective depth all as per drawing No CESZ/TD-01/2015 Sht 1/3 to 3/3.

M & L one site LLDPE septic tank in any type of soil foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab covers including RCC precast manhole cover having 6mm plate embedded all around/fiber reinforced cover with angle iron frame vent shaft and sludge chamber etc complete for 30 Users Complete all as specified and shown drg CESZ/TD-1080/2011.

M&L cement concrete 1:3:6 type C2 bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in complete 150mm pipe all as specified and directed.

M&L reinforced concrete pipes 150mm bore, class NP2, laid and jointed complete with collars laid in trenches and jointed in CM 1:1 and tested as specified.

S&F glazed and skeleton shutters thickness 30 mm,(2nd class softwood) (kail), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters supplied and fitted to chowkhats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, section specified 8 clause 8.24(b), all as specified.

M&L for preparation of newly or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average wide of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, all as specified.

S&F steel ventilators with top hung shutter including hinges steel peg stay complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified.

S&F butt hinges, 75 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified.

S&F 150mm long aluminium anodised, barrel tower bolt ISI marked complete all as specified.

S&F 100mm long aluminium anodised, barrel tower bolt ISI marked complete all as specified.

S&F 150mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified.

S&F 100mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified.

S&F second class softwood (kail) plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 13 Sqcm and n.exc 25 Sqcm complete all as specified and directed.

S&F second class softwood (kail) plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 3 Sqcm and n.exc 6 Sqcm complete all as specified and directed.

M&L for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work in ceiling etc., all as specified.

Supply only integral water proofing compound, all as specified.

M&L for 100mm thick cement concrete 1:2:4 type B-1, (using 20mm graded stone aggregate) as in ramp and finishing the concrete surfaces even and smooth without using extra cement with spike rolling to surfaces or making impressions of expanded metal, while the concrete is green complete all as specified.

M&L for RCC (Design Mix M-30) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings bases of columns, raft and raft beams sides and soffits of foundation and similar complete all as specified and directed.

M&L for RCC M-30 design mix in foundations including raft, footings, foundation beams, plinth beams, bases for columns etc and mass concrete complete all as specified and directed.

M&L for formwork to faces of walls, retaining walls, abutments, parapets and similar work, vertical or to batter for fair finished flat surfaces complete all as specified and directed.

M&L for M-30 Design mix using 20mm graded stone aggregate in wall, retaining walls, basement walls ballast wall and the like any thickness above top of footings complete all as specified ad directed.

S&F heavy duty 4 HP (3KW) trolley type 250 Bar high pressure washer and 1440 RPM speed standard 220 Volts AC power supply with spray Gun and foam Gun all required accessories all as specified and directed.

M&L 25mm bore steel water tubing medium grade galvanised including tube fillings such as tees, sockets bends elbows, union, nipple etc with screwed and socketed joints laid in trenches/ under floor/ under road or laid in floors complete all as specified.

-Ditto- all as per item No 112 but 20mm bore dia

S&F in repair of stop valves/gate valves, cast copper alloy, screwed down, crutch or butterfly handle with high pressure, screwed both ends for iron pipe or unions and fixed complete including taking down of old one suitable for 25mm dia bore complete all as specified and directed by Engr-in-Charge.

S&F in repair of stop valves/gate valves, cast copper alloy, screwed down, crutch or butterfly handle with high pressure, screwed both ends for iron pipe or unions and fixed complete including taking down of old one suitable for 20mm dia bore complete all as specified and directed by Engr-in-Charge.

M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 Volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall with the help of heavy duty ISI mark PVC casing capping strip in any length wiring system and along with its all connected fittings accessories including providing of wooden board with Bakelite sheet for housing / mounting of switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 Volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling to match it as per the existing surfaces etc for one light point / fan point controlled by one switch of one way point wiring system complete, all as specified & directed by EIC

-Ditto- all as per item No 116 but one 3 pin 5 Amp switch socket outlet on independent board, all as specified.

-Ditto- all as per item No 116 but one 3 pin 5 Amp switch socket outlet on same board with accessories, all as specified.

-Ditto- all as per item No 116 but 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws gutter/plug etc PVC unsheathed cable into and including wooden board with Bakelite sheet and PVC insulated FRLS cable of size 2.5 Sqmm as earth continuity conductor for 15 amps switch socket outlet on independent board, all as specified.

S&F in repair ceiling rose surface Bakelite surface 65x50 mm 3 terminals fixed on wall/ ceiling and including PVC block, all as specified.

S&F in repair LED light fitting mirror type with high out put diffuser2 feet, 10 watt 220 Volts AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.

S&F in repair modular switch single pole one way 6 Amps 1 module 240 Volts, complete all as specified and directed.

S&F in repair modular socket, 6A-2/3 pin combined 2 module 240 Volts, complete all as specified and directed.

S&F in repair modular switch socket combination 16A, 6 pin, 3 module 240 Volts, complete all as specified and directed.

S&F in repair modular white cover plate with frame, 8 module, all as specified.

S&F switch piano flush type, single pole 16 Amp 240 Volts, complete all as specified.

S&F socket outlet 2 in, 1, 3 pin, 5 and 15 Amps flush type complete all as specified.

M&L for sheet metal enclosure for DBs whtn MCB to be used single phase 240 Volts, double door 04 way with 200 Amps rated bus bar complete all as specified.

S&F MCB, SP 6 to 32 Amps, 240 Volts, 'B' curve complete all as specified.

S&F MCB, DP 40 Amps, 240 Volts, 'B' curve complete all as specified.

S&F in repair lamp holder, insulated body, threaded dome pattern, suitable for bracket fittings, complete all as specified.

S&F in repair 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 Amp to 32 Amps, in the MCB DB complete with connecting testing and commissioning, all as specified.

S&F in repair 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 32 Amps, in the MCB DB complete with connecting testing and commissioning, all as specified.

S&F in repair 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of two poles and current carrying capacity 63 Amps, SPN in the MCB DB complete with connecting testing and commissioning, all as specified.

S&F in repair MCB DB 12 way sheet metal enclosure SPN 240 Volts, 50Hz with IP-42 protection, single door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified.

S&F in repair LED bulb thread/pin type of capacity 10 watt, all as specified

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified.

Earthling for poles and other machinery using GI wire 4 mm as earthling lead and MS galvanised earth plate of size 60cmx60cmx6mm as earth electrode, all as specified.

M&L in repairs for Earthling complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The quoted rate shall be inclusive of necessary earth work, RFR and removal etc.

M & L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia casing capping, medium grade ISI marked with all accessories such as tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as specified and directed. Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM

S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross-sectional area 16 sqmm, 2 core complete all as specified.

M/S Ghulam Hassan Lone (BID ID -3443480)