REPAIR / REPLACEMENT OF ROOF SHEET, LEAKAGE / SEEPAGE, SUNKEN TREATMENT AND PLUMBING / SANITARY FITTINGS AND ALLIED WORKS OF AGE B/R -I (AF) UNDER GE (AF) CHABUA

Amount

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or 'J' / 'L' hooks including dismantling complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in plain sheet as in ridges, gutters , facia bd etc l, fixed with self tapping screws or 'J' / 'L' hooks including dismantling complete all as specified and directed.

S&F 0.63mm thick class VII corrugated galvanized mild steel sheeting with two corrugation side lap fixed with J hooks in roof including dismantling complete all as specified and directed.

M&L for 6 mm thick asbestos cement, corrugated or semi corrugated sheet in roofs, wall fixed with L- type or "J" or cranked hook bolts etc including dismantling complete all as specified and directed.

S&F asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheets with 'L' or 'J' type or cranked hook bolt including dismantling complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section, in any position of framed work complete all as specified and directed.

S & F rolled mild steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats and MS Plate etc. using Fe 410-W(Gde E-250 Quality- A) complete all as specified and directed

S & F rolled mild steel work in tubular trusses, rafters, purlins, posts , flat sections etc incl necessary welding/fabrications using Fe 410-W(Gde E-250 Quality- A) complete all as specified and directed

M&L for preparation of newly steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of existing PCC of any position and in any situation including removing debris from the premises exceeding 50 mtr complete all as specified and directed.

M&L for brushing neat cement slurry @ 3 Kgs/Sqm on any surface complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) on roof surface to maintain slope and to bring uniform surfaces complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:4) on concrete surfaces mixed with WPC @ 3% by weight of cement finished the surfaces fair and even complete all specified and directed. Note:- WPC shall be measured and paid separately.

Supply only water proofing compound complete all specified and directed.

M&L for one coat of applied bituminous primer over cleaned surface @ 0.30 Ltr per sqm and over one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/ Sqm over bituminous primer then followed by APP modified five layer polymeric membrane 3 mm thick minimum weight 3.6 Kg per Sqm reinforced with polyester non woven fabric (weighting not less than 150 gm per sqm) laid as per the manufacturer's instruction with side over lap of 75 mm and end over lap of 100 mm and applying one coat of polymeric modified bitumen 85/25 @ 1.20 Kg per Sqm including taking down existing roof treatment complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (Using 12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, chajjas complete all as specified and directed.

Disconnecting existing tanks, setting aside (for lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position (Cleaning repairing etc measured separately) capacity 500 ltrs complete all as specified and directed.

S&F in repair rotational moulded polythene water storage tank of capacity 500 ltr (Cylindrical/vertical with closed top) double layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with fitting etc of 20mm dia complete all as specified and directed.

S&F in repair rotational moulded polythene water storage tank of capacity 1000 ltr (Cylindrical / vertical with closed top) double layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with fitting etc of 20mm dia complete all as specified and directed.

S&F in repairs ball float valve 20mm high pressure of PTMT with epoxy coated, aluminium rod and high density plastic ball screwed for iron pipe (minimum weight for 20mm-210 grams) complete all as specified and directed.

S&F in repairs 20mm gun metal, globe or gate valve, with iron wheel head screwed both ends for iron pipe and fix complete all as specified and directed.

S&F 15 mm bore GI water tube medium grade with all fittings and fixed to wall, floor and ceiling etc, complete including portion ordered to be concealed including taking down complete all as specified and directed.

S&F 20 mm bore GI water tube medium grade with all fittings and fixed to wall, floor and ceiling etc including taking down complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

S & F for suspended false ceiling using anodized GI exposed ceiling suspension system of grid size 60 cm x 60 cm width main runner 'T' size 24 mm x 24 mm x 0.3 mm thickness and cores Tee of size 24 mm x 24 mm x 0.43 mm thick (using 60 cm x 60 cm 4 mm thick ceiling board) to be placed in grid of GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing position for light fixtures, air conditioning diffuser and ducks, sprinkler, smoke detector etc. The main runner to be secured to structural soffit by hanger @ 1220 mm maximum C/C. The last hanger at the end of each runner should not be placed at more than 450 mm from the adjacent wall. Flush fitting 1200 mm cross 'T' to be inter locked between main runner @ 610 mm C/C so as to form 600 mm x 600 mm grid including S&F 4mm thick E-Board classic ceiling of size 600x600mm (Non asbestos) and dismantling complete all as specified and directed.

S&F 4mm thick Non-asbestos cement building boards fixed to framework with screws in ceiling incl apply two coats of white wash on ceiling board complete all as specified and directed.

S&F IInd class hardwood in scantling timber framed and fixed wrought in any position and in any situation complete all as specified and as directed.

M&L for preparation of new or old wood and wood based materials applying two coats of creosote oil complete all as specified and directed.

Dismantling floor/hearth or wall tiling including cement mortar bedding (but not backing) and removing debris from the site up to 250 mtr distance, complete all as specified and as directed.

M&L for PCC (1:5:10) type E2 (using 40mm graded aggregate) as in filling and mass concrete in sunken portion, complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick or concrete surfaces (in sunken portion) mixing WPC @ 3% by wt of cement and finished even & smooth without using extra cement, complete all as specified and as directed. Note:- WPC shall be measured and paid separately.

M&L for Polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) coloured (including two Nos fixing bolts incl PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed.

S&F in repairs vitreous china squatting pan "Orissa pattern" size 580 x 440 mm white integral foot rests incl 'P' or 'S' trap and connecting CI pipe 100 mm dia up to outer wall so as to connect PVC ( SWR) pipe (excluding flushing cistern and flush pipe) but including syphon, complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B1 (Using 20 mm graded aggregate) as in sub base of floor surface, complete all as specified and as directed.

M&L for non skid ceramic coloured tiles (400 x 400)mm and 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile including screed bed of mortar 15 mm thick in CM (1:6) all as specified and directed.

M&L for glazed ceramic coloured tiles (light shade) of size 350x250x7mm/450x350x7mm thick for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cement to match including10 mm thick plaster in CM (1:4) complete all as specified and as directed.

S&F in repair 10 litre capacity PVC valve less syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and as directed.

S & F in repairs 15 mm dia bore cast copper alloy chromium plated angle cock /stop cock screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed.

S&F in repair 450mm PVC connector complete all as specified and as directed.

S&F in repair 15 mm dia bore bib taps cast copper alloy with, capstan head, CP long body fancy type screwed down for iron pipe 15mm dia complete all as specified and directed.

Dismantling of PVC/AC drain pipes in any position, any size jointed in cement mortar including all fittings, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socket, in any length with rubber ring joints, laid fixed to wall or in floor, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socket, in any length with rubber ring joints, laid fixed to wall or in floor, complete all as specified and directed.

S&F in repairs PVC (SWR) bend any radius, 110 mm dia with access door with solvent cement joint complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) junction single (single T) equal or unequal, complete all as specified and directed.

Repairs to Bath room/Toilet/Kitchen Floor traps by replacing the damaged Floor traps and connected waste pipes with new floor traps and waste pipes. The joints of traps and waste pipes shall be done properly/leak proof and re-fixing the same floor/wall etc and the surfaces finished even to match with the existing surface including demolition of concrete if required and making good to surface using PCC 1:2:4 type B1 (using 20mm graded stone aggregate) or CM 1:4 and tiling as required complete all as specified and directed. Note:- Quantity of floor/wall tiles shall be measured and paid separately under the relevant items.

Demolition of brick work built in cement mortar complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius in half brick thick wall built in CM 1:4 complete all as specified and as directed.

Taking down cement plaster including raking out joints hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for rendering 15mm thick plaster in CM (1:4) on brick or concrete surfaces finished even & smooth including taking down cement plaster, raking out joints, hacking for key complete all as specified and as directed.

M & L for rendering 15 mm thick on other than fair faces of Brick wall finished fair & even in CM (1:6), complete all as specified and as directed.

M&L for rendering 10mm thick plaster in CM (1:3) on brick or concrete surfaces of ceilings, finished even & smooth including taking down cement plaster, raking out joints, hacking for key complete all as specified and as directed.

M&L for two coats of oil bound distemper over a layers of wall putty, 1 mm thick rubbing with sand paper to achieve to smooth surfaces distemper over a coat of primer on newly plastered surface using roller only as per manufacturers instruction, complete all as specified and as directed complete all as specified and as directed.

M&L for three coats of white wash on newly plastered surface of wall including preparation of surfaces, complete all as specified and as directed.

M&L for three coats of white wash on newly plastered surface of ceiling including preparation of surfaces, complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint incl preparation of surface complete all as specified and as directed.

Taking down chowkats or frames with shutters w/o taking off shutters from the frames n.exc 1.5 Sqm each,complete all as specified and as directed.

Taking down chowkats or frames with shutters w/o taking off shutters from the frames exc 1.5 Sqm and n.exc 4.0 sqm each each, complete all as specified and as directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opeing, complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail ,lock rail & bottom rail on either sides and as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading, and joint together with solvent cement, complete all as specified and as directed.

S&F 150mm long anodised aluminium handles, cast type, complete all as specified and as directed.

S&F for 150mm long anodised aluminium barrel tower bolt of extruded section, complete all as specified and as directed.

S & F stainless steel butt hinges 100mm size medium weight, complete all as specified and as directed.

M&L for coloured glossy finish Chequered cement concrete tiles 30cm x 30cm x 25mm thick, With white cement & pigment set, jointed and pointed in neat cement slurry and painted in white or coloured cement in floors incl 15mm thick screed bed in CM (1:6) complete all as specified and directed

M&L for coloured, glossy finish precast 60mm thick cement concrete interlocking pavers/ tiles Grade M-35 made with grey cement and pigment manufactured by automatic hydraulic compression with high compressive strength, any size, pattern and shape as approved by GE, laid dry over 30mm thick sand cushion in patteerns with different colour paver block /tiles as in path, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate ) as in kerb / coping including necessary form work etc complete all as specified and directed

M&L for 100 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in Sub base for path/hard standing ,complete all as specified and as dircted.

Schedule of Credit

M/s Shiva Technical Enterprise

M/s Krishna Construction

M/S R G Construction

M/S R & R D ENTERPRISES

M/s KL Agarwalla & Co

pintoo construction

J D construction