SPECIAL REPAIR TO BLDG NO 91 AT 14 GTC SUBATHU UNDER GE KASAULI

Amount

Schedule 'A' Section - I

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L Non skid ceramic coloured tiles 7mm to 8mm thick (sqaure/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:4 complete all as specified.

M & L for rendering 15mm thick cement plaster (1:3) on fair faces of brick work or concrete surfaces complete all as specified.

M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified.

Taking down cement plaster on brick or stone wall, Ceilling etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc complete all as specified.

M & L Rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified.

M & L Rendering 5 mm thick on other than fair faces of brick work or concrete surfaces in ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified.

M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distempering over a coat of Chalk whitening etc complete all as specified.

M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distempering over a coat of Chalk whitening in ceiling etc complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each .

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm but n.exe 4.0 Sqm each .

M&L for pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified.

M&L for pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified.

S&F for 35 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

S&F for 35 mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive, glass ,gauge etc ( without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8 clause 8.24(a), supplied and fitted to chowkats complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.

S& F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 100 mm long aluminium handle cast type anodised, complete all as specified.

S&F Hasp and staple, safety type,of aluminium anodised including bolt to hinge plate and fixed with screws 100 mm size complete all as specified.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks or galvanised mild steel staples etc complete all as specified.

S&F 100 mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified.

S&F Mild steel work as in hold fast and similar articles conforming to Fe-290 Gde-165.

M&L PCC 1:3:6 type C-I using 20mm graded stone aggregate as in bed block and filling of chowkats etc complete all as specified.

S & F for Aluminium anodized 200mm long barrel tower bolt of extruded section and fixed.

S&F for 150mm long aluminium anodized handles cast type complete all as specified.

S&F 300mm long Aluminium alloy anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed etc complete.

S&F 300mm, mild steel ordinary rat tail rod pattern/ 150 mm mild steel Helical door springs including roller and roller plate complete all as specified.

S & F for Powder coated(minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F for Powder coated(minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

M&L for coloured sheet glass 4 mm thick tinted fixed with windows frame of area of each pane not exc 0.50 Sqm complete all as specificed and directed by Engr-in-Charge.

M&L for coloured sheet glass 4mm thick tinted fixed with windows frame of area of each pane exc 0.50 Sqm complete all as specificed and directed by Engr-in-Charge.

M&L for coloured sheet glass 4 mm thick tinted frosted on one side fixed with windows frame of area of each pane not exc 0.50 Sqm complete all as specificed and directed by Engr-in-Charge.

M&L for two coats of synthetic enamel paint on steel Surfaces of any descri-ption, over 10cm in width or girth , not other wise described, including preparation of new surface complete all as specified.

Applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise described over 10 cm width or girth including preparation of surfaces.

S&Fin repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as specified.

S&F stop valve Fancy type 15 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union 15mm dia and fixed in repair complete all as specified

S&F 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified

S&F bib taps cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for iron pipe or for bruss ferrule 15 mm dia fixed in repair complete all as specified.

S&F in repairs Vitreous China wash hand basin white with pedastal flat back size 550x400 mm including brackets, complete all as specified.

S&F in repair 15 mm bore brass Chromium plated wall/basin/sink mixer for mixing hot & cold water screwed down for iron pipe etc complete all as specified.

S&F chromium plated shower rose 125 mm size with or without swivel joints and size including fixing to steel pipe or unions mixing valve including three joints to steel pipes or union and plugging and screwing to walls in repairs complete.

S&F in repair Vitreous china squatting pan orissa patern size 580x440mm white with integral foot rest( excluding flusing cistern and flush pipe) etc complete all as specified.

S&F10 ltr capacity PVC valveless syphonic action type flusing cistern low level white with inlet ball valve float and handle including bracket fixed in repair complete

S&F PVC connections 15mm bore with PTMTnuts of length 450mm in repairs complete all as specified

Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store upto 15mm bore.

S&F 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs etc complete all as specified.

Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store.

S&F 20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs etc complete all as specified.

S&F in repair Towel rail 600mm long chromium plated fixed in and including chromium plated brass screws and wooden/plastic cleatsetc complete all as specified.

S&F in repair 15 mm dia Pillar taps, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 75 mm dia PVC(SWR) floor trap, with grating including jointing with solvent cement etc complete all as specified.

Demolition of cement concrete in sunken portion and floor as specified.

M & L for rendering 15mm thick cement plaster (1:3) mixed with integral liquid water proofing compound (as per manufacturer instruction) on fair faces of brick work or concrete surfaces. Note: Integral liquid water proofing compound to be paid separately.

Supply only Integral liquid waterproofing compound.

M&L for brushing neat cement slurry with 0.50 kg of cement per sq. metre complete all as specified.

M&L Brushing neat cement slurry with 0.25 kg of cement per sq. metre complete all as specified.

M & L Polythene film, 150/200 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m complete all as specified

M&L for plain cement concrete 1:5:10 using 40 mm graded stone agg as in sunken portion complete all as specified

Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified

Material and labour for brick work with sub class ‘B’ old size bricks, straight or curved on plan exc 6.0m mean radius in cement mortar 1:4, complete all as specified.

S & F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by the Engineer-in-Charge.

S & F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed by the Engineer-in-Charge

S & F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by the Engineer-in-Charge.

S & F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, walls complete all as specified and as directed by the Engineer-in-Charge

S&F PVC(SWR) bend 110mm dia bore complete all as specified and directed by Engr-in-Charge

S&F PVC(SWR) bend 110mm dia bore with access door complete all as specified and directed by Engr-in-Charge

S&F PVC(SWR) vent cowl110mm dia bore complete all as specified and directed by Engr-in-Charge

S&F PVC(SWR) bend 75mm dia bore complete all as specified and directed by Engr-in-Charge

S&F "in repair" for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Steel ventilator with top hung shutter including hinges, steel peg stay, complete.

S&F for welded steel wire fabric to wood or steel members per square meter not exceeding 4 Kg., complete all as specified.

M&L for MS work as in staging, cover of water storage tank, conforming to Fe 290 Gde E 165 as diredcted by Engineer-in-Charge,complete all as specified.

Taking down shutterShutters of any description n exc 1 sq. m each complete all as specified and as directed

Dismantling boarding, any description, fixed in any position with nails complete.

M&L for 18/19 mm Pre laminated block boards,exterior grade,prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with nails screws to timber / steel frame work as in wall panelling/cupboard in repairs complete all as specified.

Dismantling water tanks of size exe 500 lit and n exe 1000 lits and removing to store complete all as specified

S&F for 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified

S&F for 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed.

Taking down carefully copper/AImn point wiring (Light,Fan/Point Socket or power) (fittings such as switches ceiling roeses, pendent, regulators, sockets etc to be measured & paid seprately) & making good to disturbed surface of walls/floors etc.

M&L point wiring using approved colour coding as per IS with stranded copper conductor single core 1.5 Sqmm (Nominal area), PVC insulated cable in and incl PVC conduit (ISI marked) including cutting chiseling and grouting concealed PVC conduit pipe, tee, elbow and bend etc.and with all connecting accessories incl mild steel sunken boxes suitable for mounting switch/sockets with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer incl mounting frame over cover plate, covered with 3mm thick plastic laminated sheet, incl PVC insulated copper conductor 1.5 Sqmm (Nominal area) single core PVC cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified. Note : Switch/sockets shall be measured and paid for separately .

One light/fan point controlled by one switch

One switch socket outlet 3 pin,5 Amp on the independent board

One switch socket outlet 3 pin,5 Amp on same board

One light point controled by two way switches with cables 1.5 Sqmm size

One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sqmm size

All as per item No 81.00 here-in-before but with 2 single core PVC insulated FRLS and sheathed copper conductor of size 2.5 Sqmm in and including PVC conduit (ISI marked) including cutting chiseling and grouting concealed PVC conduit pipe, tee, elbow and bend etc.and with all connecting accessories with 2.5 Sqmm PVC insulated FRLS copper conductor as earth wire and connecting to common earth dolly for 6 pin 16 Amp socket outlet on the independent board.using 2.5 sqmm copper cable incl PVC insulated copeer conductor 1.5 Sqmm as continued earth wire .

All as per item No 81.00 here-in-before but with 2 single core PVC insulated FRLS and sheathed copper conductor of size 4.0 Sqmm in and including PVC conduit (ISI marked) including cutting chiseling and grouting concealed PVC conduit pipe, tee, elbow and bend etc.and with all connecting accessories with 4.0 Sqmm PVC insulated FRLS copper conductor as earth wire and connecting to common earth dolly for 6 pin 16 Amp socket outlet on the independent board.

S&F bell push, 6 Amps, SP, flush type.

S&F Electric Bell , AC 230 volts, single pole .

M& L switch piano, flush type, single pole 2 way 6 Amp,ISI marked .

S&F Lamp holder,PVC insulated body, with back plate suitable for batten fitting .

M& L switch piano, flush type, single pole 1 way 6 Amp,ISI marked completeall as specified.

S&F switch piano flush type, single pole 1 way 16 Amp .

M& L socket 5 pin 6 Amp piano flush type,ISI marke..

S&F socket out let 2 in one 6 pin 6 & 16 Amp.

S&F ceiling rose, 3 phase/ PVC/ polycorbonate,isolate body.

S & F LED bulb 10 watt.

Supply and fixing Aluminium housing LED 22 Watt inverter batten with inbuilt Li Ion battery for power backup of 2 to 3 hrs complete .

S&F Decorative wall light fixture made up of Polycarbonate , fancy type, made out of Polycorbaonate,suitable for B-22 base holder fixed as in repair complete all as specified and directed.

S&F sleek LED mirror light with diffuser 7/ 9 watt along with all accessories prewired including connecting with copper flexible cable of size 0.7 Sqmm 3 core and all as specified and directed .

S & F Bulkhead luminaire Decorative Energy saving new generation 10W LED IP65 with opal diffuser incl electronics driver & connection with copper flexible cable 3 core complete all as specified and directed.

S & F LED Building security light30 wattLED Inverter RTC inbuilt for AUTOON/AUTO OFF and must have dimming facility from 10 to 100% of rated wattage as peruser defined timeline made pressure die cast housing with individuals LEDs & Lens with modular secondary optics and IP65 protection with electronics driver and copper conductor 3 core of 0.7 sqmm from ceiling rose to security light with Bracket made out of GI light grade pipe of 32 mm dia 1.5 mtr long bend to an angle of 120 degree with fixing arrangements on wall Complete all as in repair.

Supply and fixing wall Mounting LED fitting 9/12 watt 6500K 2 ft Basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver complete all as specified and directed.

S&F sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, 8 way, 240 Volt SPN

S&F sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, 4 way, 415 Volt TPN

S & F MCBs 'B' characteristics, Double pole , 240 V, 32 Amp breaking capacity 10 kA .

S & F MCBs 'B' characteristics, Four pole , 415 V,63 Amp breaking capacity 10 kA .

S & F MCB B characterstic single pole 5 to 30 Amp, 240 volt breaking capacity 10 kA .

M&L for submain wiring with 2 single core PVC insulated FRLS cable 6 Sqmm copper conductor PVC sheathed in and including rigid PVC concealed conduit heavy duty of suitable size incl cutting chiseling of wall and making good to disturbed surface of walls / floor etc with plastering painting etc so as to match with the existing finishes, drawn with 6 Sqmm PVC insulated FRLS copper conductor cable for earth wire fixed with shaddle and connecting to common earth teriminals complete all as specified. .

Single pole and Neutral Sheet metal enclosure with a 2 pin and earth plug and socket complete with one single pole MCB 20 Amps.

S & F Non mettalic Electric meter box with single hinged door for 01 No. Single phase meter of size 250 X 200 X 105 mm after disconnecting the supply of electric meter and fixing the electric meter on meter box incl reconnecting the electric supply.

Supply & Fixing exhaust fan, energy efficent metalic blades heavy duty turbo force of size 300 mm sweep, 900 rpm, AC, 230 volts complete with louvers, shutters, mounting on walls with holding down bolts, nuts, washers with cutting holes into or through stone/brick walls for fixing of 450 mm sweep exhaust fan including making good the cutting and matching the surface with existing surfaces and connection of flexible copper conductor cable three core ceiling rose to fan and testing complete all as specified.

Supply & fix ceiling fans complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated including J hook for fixing to roof and provinding conneciton to ceiling complete all as specified and directed.

Taking down carefully storage type water heater (Geyser ) of any make of capacity 25 Ltrs after removing all electrical and water connection from installed position and supply & fixing Electric storage water heater (vertical type) 25 litres, with porcelain enamel glass lined inner tank 230 V, AC, Single phase, IS 2082 Marked, 5 Star rating, with 15mm brass non return valve and including connecting fastners not less than 100 mm with suitable nut, bolt & washers grouted in walls with complete masonry work for proper mounting of Geyser fastning bolts etc as directed as site reqmt and making necessary inlet and outlet water & electric connection tested on load including provision of 15 Amp plug top and PVC insulated & PVC sheathed copper conductor cable 4 sqmm 3 core upto 15 Amp plug point and inlet and outlet copper connection complete all as specified and directed.

Earthing complete with and including galvanised steel earth plate electrode 60 cmx 60cm x 6 mm thick surrounded by mixture of charcoal and salt in alternate layers , buried directly in ground vertically in a pit of depth not less than 2.25 meter deep below ground level with top as of the plate at a depth of not less than 1.5 mtrs below normal ground level connected to galvanized iron or steel earth lead wire 4.0 mm dia,( NO 8 SWG) by means of bolts ,nuts, check nuts and washers of galvanised iron or steel earth wire protected by galvanised steel pipe 15 mm bore (light grade) and connected to main switch or main control board all as shown in electrical plate No. 3 of SSR - 2009(Pt I) & including necessary excavation and earth work. The rate also include charcoal and salt in alternate layers, 20 mm bore GI pipe (Light grade ) for watering , protection pipe funnel, wire mesh , PCC 1:2:4 type B1 chamber in cement concrete ,50 mm thick precast RCC M-25 ( Normal mix) cover duly reinforced with XPM (weight not less than 3 kg /sqm ) and CI frame etc , and including provision of test point , connecting to test point and testing on completion etc, complete all as specified. NOTE : The unit rate include earthing lead and protection pipe upto 6.5 metre from top of earth plate.

Supply & laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured wit galvanised steel wire or tape and overall PVC sheathed 10 Sqmm nominal cross section,4 core ,stranded conductor , in service connections.

Excavating in trenches, n.exc 1.5 m wide and n. exc 1.5 m in depth for laying cable , pipe and getting out

Returning , filling in, including spearding, levelling , wateing and well ramming in layers not exc 25 cm

Removing excavated material n exc 50 M and depositing whee directed at a level n exc 1.5 m above the starting point

Sand filling under floors or in foundations including watering and consolidation.

Supply and Laying Bricks old size sub class 'B', of class designation 10, for the protection of cable laid flat dry across the cable complete all as specified.

Tubes, light grade, galvanised 40 mm dia with all fittings laid in trenches or fixed on walls etc.

Amount of credit of Rs. 50552.40 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

N.N.CONSTRUCTION

M/s Parmod Kumar

M/S SHANTI SARUP DINESH CHAND