CONSTRUCTION OF PROSECUTION OFFICE BUILDING AT NAUGACHHIYA IN THE DISTRICT OF BHAGALPUR - WITH ELECTRIFICATION

Name of Work CONSTRUCTION OF PROSECUTION OFFICE BUILDING AT BHAGALPUR IN THE DISTRICT OF BHAGALPUR WITH ELECTRIFICATION Estimated Cost in Rs. 18004447 Time of Completion Months

Sl No. Items Requirement

Name of the contractor

Address of the contractor

1 Earnest Money (A) As prescribed in Tender document duly pledged in Favour of EE Bhagalpur Divn.

Bid Security Amount - Rs.

2 Character Certificate No. with Issue date.

3 VAT Registration No.

5 Average Annual Financial Turnover of Last Three Years

6 Experience of doing work of similar nature

7 Details of Engg. Set up for successful completion of work

8 Details of Tools & Plants

9 Details of Financial availability through Bank and/or self

10 Necessary Undertakings

11 Bidding Capacity (Provide the Amount)

12 Timely Completion (Certificate of the Concerned Executive Engineer)

Junior Engineer Asstt. Engineer Executive Engineer Superintending Engineer BOQ BOQ BOQ Work Circle-2

BILL OF QUANITITY FOR THE CONSTRUCTION OF PROSECUTION OFFICE BUILDING AT NAUGACHHIYA IN THE DISTRICT OF BHAGALPUR,

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 79.5 360.7 Rs. Three Hundred Sixty And Seventy Paise Only

2 2.26 Filling available excavated earth (excluding rock ) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead upto 50M and lift upto 1.5M. Cu.M 79.5 123.9

3 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 150.8 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

4 4.1.4 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 40 mm nominal size) Cu.M 12.3 3879.4 Rs. Three Thousand Eight Hundred Seventy Nine And Fourty Paise Only

5 4.1.5 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Cu.M 5.16 3434 Rs. Three Thousand Four Hundred Thirty Four Only

6 4.12 Extra for providing and mixing water proofing material in cement concrete work in the proportion recommended by the manufacturers. Per 50 kg. cement 49 57.16 Rs. Fifty Seven And Sixteen Paise Only

7 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. Sq.m 110.4 211.6 Rs. Two Hundred Eleven And Sixty Paise Only

8 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roots, landings, balcnies and access platform. Sq.m 425.12 437.5 Rs. Four Hundred Thirty Seven And Fifty Paise Only

9 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth bams, griders, bressumers and contilevers. Sq.m 550.3 404.7 Rs. Four Hundred Four And Seventy Paise Only

10 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: Columns,Pillars, Piers, Abutments, Posts and Struts Sq.m 535.62 494.4 Rs. Four Hundred Ninety Four And Fourty Paise Only

11 5.9.7 Centring and shuttering including strutting, propping etc. and removal of form for: Stairs,(excluding landings) except spiral-staircaces. Sq.m 33.18 439.9 Rs. Four Hundred Thirty Nine And Ninety Paise Only

12 5.9.19 Centring and shuttering including strutting, propping etc. and removal of form for: Weather shade,Chajjas, corbels etc. including edges Sq.m 27.15 550.9 Rs. Five Hundred Fifty And Ninety Paise Only

13 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 8209.9 94.5 Rs. Ninety Four And Fifty Paise Only

14 5.22.7B Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 10mm dia. KG 8291.53 92.6 Rs. Ninety Two And Sixty Paise Only

15 5.22.7C Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 12mm dia. KG 2440.23 90.8 Rs. Ninety And Eighty Paise Only

16 5.22.7D Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 16mm dia. KG 8192.62 91.7 Rs. Ninety One And Seventy Paise Only

17 5.22.7E Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 20 mm dia. KG 12313.81 91.7 Rs. Ninety One And Seventy Paise Only

18 5.22.7F Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 25 mm dia. KG 1221.59 91.7 Rs. Ninety One And Seventy Paise Only

19 5.33A.1+ 5.33.B1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:Add or deduct for providing richer or leaner mixes respectively at all floor levels: Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 77.87 4921.4 Rs. Four Thousand Nine Hundred Twenty One And Fourty Paise Only

20 5.33A.2.1+ 5.33B1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Walls columns, pillars, posts cind struts: Add or deduct for providing richer or leaner mixes respectively at all floor levels:Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 61.6 5458 Rs. Five Thousand Four Hundred Fifty Eight Only

21 5.33A.2.2+ 5.33B.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.:Add or deduct for providing richer or leaner mixes respectively at all floor levels:Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 119.53 5841.7 Rs. Five Thousand Eight Hundred Fourty One And Seventy Paise Only

22 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 13.326 4923 Rs. Four Thousand Nine Hundred Twenty Three Only

23 6.1.14C+ 6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) : Extra tor Brick work in superstructure above plinth level upto floor V cum Cu.M 108.06 5765.2 Rs. Five Thousand Seven Hundred Sixty Five And Twenty Paise Only

24 6.45.1 Half brick masonry with non modular fly ash bricks of class designation 10, conforming IS :12894, in superstructure above plinth and upto floor V level. Cement mortar 1 : 3 (1 cement : 3 coarse sand) sqm 412.058 723 Rs. Seven Hundred Twenty Three Only

25 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base, the drain duly. plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. but excluding carriage cost of bricks, sand and jhama metal. Per M 60 1087.9 Rs. One Thousand Eighty Seven And Ninety Paise Only

26 8.2.2.1 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels: Granite of any colour and shade:Area of slab up to 0.50 sqm. Sq.M 51.064 4242.9 Rs. Four Thousand Two Hundred Fourty Two And Ninety Paise Only

27 9.20.2 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including stainless steel butt hinges with necessary screws. Sq.m 39.102 2578 Rs. Two Thousand Five Hundred Seventy Eight Only

28 9.48.1 Providing and fixing M.S. grills of requirement pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete: Fixed to steel windows by welding. KG 863.389 144.5 Rs. One Hundred Fourty Four And Fifty Paise Only

29 9.96.1 Providing and fixing alluminium sliding door bolt anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to rquired colour and shade with nuts and screws etc. complete : 300 x 16mm Each 28 235.5 Rs. Two Hundred Thirty Five And Fifty Paise Only

30 9.97.1 Providing and fixing alluminium sliding tower bolt anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with nuts and screws etc. complete : 300 x 10mm Each 56 111.4 Rs. One Hundred Eleven And Fourty Paise Only

31 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc.complete: 125mm Each 56 57.1 Rs. Fifty Seven And Ten Paise Only

32 9.101.2 Providing and fixing alluminium hanging floor door stopper anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete : Twin rubber stopper Each 20 60.8 Rs. Sixty And Eighty Paise Only

33 9.147D.5 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. Sq.M 62.335 8624 Rs. Eight Thousand Six Hundred Twenty Four Only

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm)

34 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. Sq.M 6.439 6303.4 Rs. Six Thousand Three Hundred Three And Fourty Paise Only

35 10.14.1 Providing and fixing T-iron frames for doors. windows and ventilators of mils steel Tee-sections, joints miltred and welded with 15 x 3 mm lugs 10 cm long embedded in cement concerete blocks 15 x 10 x 10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including. KG 290.85 110.4 Rs. One Hundred Ten And Fourty Paise Only

36 10.17 Providing and fixing M.S.fan clamp type I or II of 16 mm dia.M.S. bar bent to shape with hooked ends in R.C.C slabs during laying including painting the exposed portion of loop,all as per standard design complete. Each 45 174.6 Rs. One Hundred Seventy Four And Sixty Paise Only

37 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). Kg 531.7 546.8 Rs. Five Hundred Fourty Six And Eighty Paise Only

38 11.3.1 Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete: 40 mm thick with 20 mm nominal size stone aggregate Sq.M 49 289.1 Rs. Two Hundred Eighty Nine And Ten Paise Only

39 11.20.1 Chequerred precast cement concrete tiles 22 mm thick with marbie chips of size 6 mm in footpath & coutyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning tec. Complete on 20 mm thick bed of cement mortar 1:4(1 cement:4 coarse sand) : Light shade using white cement. Sq.M 5.95 1053.6 Rs. One Thousand Fifty Three And Sixty Paise Only

40 11.23.2.1 Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with: Rajnagar plain white marble 18mm thick above 0.20 sqm upto 0.50 sqm Sq.M 1703.4 Rs. One Thousand Seven Hundred Three And Fourty Paise Only

41 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Sq.M 222.42 795 Rs. Seven Hundred Ninety Five Only

42 11.37 Providing and laying Ceramic glazed floor tiles 300 x 300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. Sq.M 69.51 686.8 Rs. Six Hundred Eighty Six And Eighty Paise Only

43 11.41.2 Providing and laying vitrifed floor tiles in different sizes { thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete: Size of Tile 60 x 60 cm. Sq.M 252.48 1638.8 Rs. One Thousand Six Hundred Thirty Eight And Eighty Paise Only

44 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete : Size of Tile 600 x 600 mm. Sq.M 38.51 1191.8 Rs. One Thousand One Hundred Ninety One And Eighty Paise Only

45 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 159.9 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

46 12.78.2 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 110mm diameter M 10 257.5 Rs. Two Hundred Fifty Seven And Fifty Paise Only

47 12.79.5.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia Plain bend Each 12 132 Rs. One Hundred Thirty Two Only

48 12.79.6.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia Shoe Each 10 115.95 Rs. One Hundred Fifteen And Ninety Five Paise Only

49 12.80.2 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 110mm dia clip Each 126 182.72 Rs. One Hundred Eighty Two And Seventy Two Paise Only

50 12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diametre and weighing not less than 440 grams. Each 4 47.9 Rs. Fourty Seven And Ninety Paise Only

51 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 1958.83 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

52 13.13.1+ 13.36.5 Cement plaster in coarse sand : 20mm cement plaster of mix : 1:3(1cement : 3 coarse sand) :Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 20mm cement plaster 1:3 (1 cement : 3 sand) Sq.M 89.64 240.4 Rs. Two Hundred Fourty And Fourty Paise Only

53 13.24.2 6mm cement plaster to ceilling of Mix : 1:4 (1 cement : 4 coarse sand) Sq.M 428.26 125.6 Rs. One Hundred Twenty Five And Sixty Paise Only

54 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Sq.M 590 137 Rs. One Hundred Thirty Seven Only

55 13.77.2 Distempering with oil bound washable distemper of approved brand and manufacture to give and even shade: New work (two or more coats) over and including priming coat with cement primer Sq.M 1851.08 102.3 Rs. One Hundred Two And Thirty Paise Only

56 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sq.M 2441.1 105.4 Rs. One Hundred Five And Fourty Paise Only

57 13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) Sq.M 102.25 83.5 Rs. Eighty Three And Fifty Paise Only

58 20.2.4 Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete,including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap): 500 mm dia piles. M 640 1639.7 Rs. One Thousand Six Hundred Thirty Nine And Seventy Paise Only

59 26.86.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm, modulus of elasticity 900 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs /SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for Separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 45 x 85 mm Meter 59.4 768.1 Rs. Seven Hundred Sixty Eight And Ten Paise Only

60 26.87.1 Providing and fixing factory made single extruded WPC {Wood Polymer Composite} solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibers {wood powder/ rice husk/wheat husk) and non toxic additives {maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N {Face) & 900N (Edge), minimum compressive strength 50 N/mm, modulus of elasticity 850 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In• Charge. {Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick sqm 18.9 3866.5 Rs. Three Thousand Eight Hundred Sixty Six And Fifty Paise Only

61 Extra cost of brick 100A (a) Bhagalpur Per %o 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

62 Extra cost of slag cement (b) Bhagalpur Per bag 3559 11.03 Rs. Eleven And Three Paise Only

63 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 96.431 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

64 Do--do-- (b) Coarse sand ( Lead 70 Km pucca from Chandan river to work site) Cu.M 234.99 Rs. One Thousand Four Hundred Fourty Nine And Fifty Paise Only

65 Do-do- (b) Stone chips Lead 80 pucca from Mirzacheuki to work site ) Cu.M 308.69 Rs. One Thousand Six Hundred Twenty Eight And Seventy Paise Only

66 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 153.21 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Rs. One Crore Twenty Six Lakh Fifty Four Thousand Nine Hundred Fifty Six Only

Numbers of item 66 (Sixty six)

Note :- (1) All types of brick-work, concrete work, plaster work, flooring and other cement related items of work include cost of curing and execution of works will be as per guidance of National Building code and direction of E/I. (2) NOTHING EXTRA repeat NOTHING EXTRA shall be paid on account of carriage and no claim whatsoever shall be entertained in this respect. If actual lead is less than above mentioned lead payment will be made as per actual lead.

Sanitary 90 Cft Septic Tank 1 No. & 4'-0" dia Soak pit- 1 no

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 22.05 360.7

2 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) Cu.M 2.49 3998.1 Rs. Three Thousand Nine Hundred Ninety Eight And Ten Paise Only

3 5.1.3 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work upto plinth level : 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)( Foundation, Band at P.L.& S.Tank Cover) Cu.M 0.89 4232.4 Rs. Four Thousand Two Hundred Thirty Two And Fourty Paise Only

4 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 63 94.5 Rs. Ninety Four And Fifty Paise Only

5 6.1.12C Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in foundations and plinth in : Cement mortar 1:4(1 cement : 4 coarse sand) Cu.M 7.73 5116.3 Rs. Five Thousand One Hundred Sixteen And Thirty Paise Only

6 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 1.34 4923 Rs. Four Thousand Nine Hundred Twenty Three Only

7 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 8.18 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

8 12.78.1 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 75mm diameter M 19.25 162.7 Rs. One Hundred Sixty Two And Seventy Paise Only

9 12.78.2 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 110mm diameter M 30.785 257.5 Rs. Two Hundred Fifty Seven And Fifty Paise Only

10 12.79.3.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee with door Each 1 193.4 Rs. One Hundred Ninety Three And Fourty Paise Only

11 12.79.4.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee without door (T. Bend) Each 8 190.7 Rs. One Hundred Ninety And Seventy Paise Only

12 12.79.5.1 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 75mm dia Plain bend Each 15 91.8 Rs. Ninety One And Eighty Paise Only

13 12.79.5.2+ 12.81 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 mm Floor trap Each 15 179.9 Rs. One Hundred Seventy Nine And Ninety Paise Only

14 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 14.57 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

15 13.17.1 12mm cement plaster of mix: 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement Sq.M 26.77 203.6 Rs. Two Hundred Three And Sixty Paise Only

16 13.24.2 6mm cement plaster to ceilling of Mix : 1:4 (1 cement : 4 coarse sand) Sq.M 7.4 125.6 Rs. One Hundred Twenty Five And Sixty Paise Only

17 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 5 4470.9 Rs. Four Thousand Four Hundred Seventy And Ninety Paise Only

18 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS :7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid Each 6 4230 Rs. Four Thousand Two Hundred Thirty Only

19 17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 13 3723.2 Rs. Three Thousand Seven Hundred Twenty Three And Twenty Paise Only

20 17.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Each 11 2764.4 Rs. Two Thousand Seven Hundred Sixty Four And Fourty Paise Only

21 18.76.1 Cutting holes up to 30x30 cm in walls including making good the same:With common burnt clay F.P.S. (non modular) bricks Each 10 198.5 Rs. One Hundred Ninety Eight And Fifty Paise Only

22 19.6.2 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :150 mm dia. R.C.C. pipe M 60 410.7 Rs. Four Hundred Ten And Seventy Paise Only

23 19.15.1 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :With 20x20 mm square bar Each 4 310.9 Rs. Three Hundred Ten And Ninety Paise Only

24 19.19.1.1 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality:LD 2.5:Rectangular shape 600x450 mm internal dimensions Each 1 1120.6 Rs. One Thousand One Hundred Twenty And Sixty Paise Only

25 19.30.1.1 Constructing brick masonry chamber for underground C.I.Inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg),R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 455x610 mm and 45 cm deep for single pipe line :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 10 4266.8 Rs. Four Thousand Two Hundred Sixty Six And Eighty Paise Only

26 Br. Providing brick bats and filling the same in soak pit as per specificarion and direction of engineer in charge. Cu.M 3.03 1198.67 Rs. One Thousand One Hundred Ninety Eight And Sixty Seven Paise Only

27 Extra cost of brick 100A (a) Bhagalpur Per %o 4.74 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

28 Extra cost of slag cement (b) Bhagalpur Per bag 39 11.03 Rs. Eleven And Three Paise Only

29 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 5.65 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

30 Do--do-- (b) Coarse sand ( Lead 70 Km pucca from Chandan river to work site) Cu.M 3.97 Rs. One Thousand Four Hundred Fourty Nine And Fifty Paise Only

31 Do-do- (b) Stone chips Lead 80 pucca from Mirzacheuki to work site ) Cu.M 3.01 Rs. One Thousand Six Hundred Twenty Eight And Seventy Paise Only

Rs. Three Lakh Twenty One Thousand Three Hundred Sixty Nine Only

Numbers of item 31 (Thirty one)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 11 1068.5

2 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Each 11 713.3 Rs. Seven Hundred Tthirteen And Thirty Paise Only

3 17.71 Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Each 11 146.3 Rs. One Hundred Fourty Six And Thirty Paise Only

4 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour,weighing not less than 88 gms. Each 11 204.7 Rs. Two Hundred Four And Seventy Paise Only

5 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour:600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms Each 11 424 Rs. Four Hundred Twenty Four Only

6 18.8.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge:Concealed work, including cutting chases and making good the : 15 mm nominal outer dia Pipes M 75 278.2 Rs. Two Hundred Seventy Eight And Twenty Paise Only

7 18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge:Concealed work, including cutting chases and making good the : 20 mm nominal outer dia Pipes M 65 350.8 Rs. Three Hundred Fifty And Eighty Paise Only

8 18.9.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge:External work:25 mm nominal outer dia Pipes M 30 294.7 Rs. Two Hundred Ninety Four And Seventy Paise Only

9 18.9.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge:External work:32 mm nominal outer dia Pipes M 36 359.1 Rs. Three Hundred Fifty Nine And Ten Paise Only

10 18.9.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge:External work:40 mm nominal outer dia Pipes M 15 477.6 Rs. Four Hundred Seventy Seven And Sixty Paise Only

11 18.15.1 Providing and fixing brass bib cock of approved quality :15 mm nominal bore Each 27 303.8 Rs. Three Hundred Three And Eighty Paise Only

12 18.16.1 Providing and fixing brass stop cock of approved quality :15 mm nominal bore Each 32 303.8 Rs. Three Hundred Three And Eighty Paise Only

13 18.16.2 Providing and fixing brass stop cock of approved quality :20 mm nominal bore Each 5 328 Rs. Three Hundred Twenty Eight Only

14 18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore Each 2 532.3 Rs. Five Hundred Thirty Two And Thirty Paise Only

15 18.19.2.2 Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore:Vertical Each 1 777.9 Rs. Seven Hundred Seventy Seven And Ninety Paise Only

16 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter Each 4 190.1 Rs. One Hundred Ninety And Ten Paise Only

17 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Per Litre 4000 9.7 Rs. Nine And Seventy Paise Only

18 18.77 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. Each 10 217.1 Rs. Two Hundred Seventeen And Ten Paise Only

Rs. One Lakh Sixty Three Thousand Eight Hundred Sixty Three Only

Numbers of item 18 (Eighteen)

Deep Tubewell P.V.C.pipe- DEEP TUBEWELL - 300mmx150mmx106.68m

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 18.12.4 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc:External work:32 mm dia nominal bore M 24.4 381.7

2 24.2.1.1 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart / bore log, including hire & running charges of allequipments, tools,plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level:All type of soil:300 mm dia M 106.68 567.9 Rs. Five Hundred Sixty Seven And Ninety Paise Only

3 24.3.2 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges,fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge:150 mm nominal size dia M 86.68 660.1 Rs. Six Hundred Sixty And Ten Paise Only

4 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818,including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge:150 mm nominal size dia M 20 673.5 Rs. Six Hundred Seventy Three And Fifty Paise Only

5 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-incharge. Cum 5.652 1343.2 Rs. One Thousand Three Hundred Fourty Three And Twenty Paise Only

6 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. Hour 12 916.8 Rs. Nine Hundred Sixteen And Eighty Paise Only

7 24.13.2 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of:150 mm dia Each 1 210.7 Rs. Two Hundred Ten And Seventy Paise Only

8 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete:150 mm clamp Each 1 1531.4 Rs. One Thousand Five Hundred Thirty One And Fourty Paise Only

9 24.15.2 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I): 150 mm dia Each 1 281.8 Rs. Two Hundred Eighty One And Eighty Paise Only

10 Supplying, fitting & fixing submersible motor pump (1 H.P.) of Crompton or any other approved I.S.I. make complete with cable wire, fited & fixed complete as per specification and direction of Engineer I/C with all accesories etc. all complete job. Per Set 1 13500 Rs. Tthirteen Thousand Five Hundred Only

11 Supplying 1 HP fully automatic Crompton single phase 220 volts starter on a common board with 16 amps Havels make DP main switch 1 No. suitable voltameter (ISI make ) 1 No. ampere meter (ISI make) 1 no, complete with panel all taxes etc. complete job. Per Set 1 2450 Rs. Two Thousand Four Hundred Fifty Only

Rs. One Lakh Seventy Seven Thousand One Hundred Fifty Two Only

Numbers of item 11 (Eleven)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 56.64 360.7 Rs. Three Hundred Sixty And Seventy Paise Only

2 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 28.32 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

3 4.1.2 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:1.5:3(1 Cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) Cu.M 22.43 4420.8

4 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: foudations, footings, bases of columns etc. for mass concrete. Sq.m 15.95 211.6 Rs. Two Hundred Eleven And Sixty Paise Only

5 6.1.14A Brick work with bricks of class designation 100A in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 9.4 4819.9 Rs. Four Thousand Eight Hundred Nineteen And Ninety Paise Only

6 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 148.7 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

7 Extra cost of brick 100A (a) Bhagalpur Per %o 9.44 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

8 Extra cost of slag cement (b) Bhagalpur Per bag 179 11.03 Rs. Eleven And Three Paise Only

9 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 9.44 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

10 Do--do-- (b) Coarse sand ( Lead 70 Km pucca from Chandan river to work site) Cu.M 11.548 Rs. One Thousand Four Hundred Fourty Nine And Fifty Paise Only

11 Do-do- (b) Stone chips Lead 80 pucca from Mirzacheuki to work site ) Cu.M 19.065 Rs. One Thousand Six Hundred Twenty Eight And Seventy Paise Only

12 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 30.596 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Total of 100 Rft

Total of 85 Rft

Rs. Two Lakh Fourty Five Thousand Six Hundred Thirty Only

Numbers of item 12 (Twelve)

Rain Water Harvesting System VIDE S/R OF BUILDING CONSTRUCTION DEPARTMENT, GOVERNMENT OF BIHAR EFFECTIVE FROM WEF 01.01.2022

ESTIMATED AMOUNT : Rs.

S. No. Code No. DESCRIPTION UNIT QUANTITY RATE (IN FIG.) RATE (IN WORDS) AMOUNT Rs.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 3.7 360.7

2 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 1.63 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

3 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) Cu.M 0.4 3998.1 Rs. Three Thousand Nine Hundred Ninety Eight And Ten Paise Only

4 6.1.12C + 6.3C Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in foundations and plinth in : Cement mortar 1:4(1 cement : 4 coarse sand): Extra for Brick work in superstructure above plinth level upto floor V Cu.M 2.63 5958.5 Rs. Five Thousand Nine Hundred Fifty Eight And Fifty Paise Only

5 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding KG 104.58 144.5 Rs. One Hundred Fourty Four And Fifty Paise Only

6 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 3.62 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

7 12.79.3.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee with door Each 3 193.4 Rs. One Hundred Ninety Three And Fourty Paise Only

8 12.79.5.1 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 75mm dia Plain bend Each 6 91.8 Rs. Ninety One And Eighty Paise Only

9 12.80.2 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 110mm dia clip Each 14 182.72 Rs. One Hundred Eighty Two And Seventy Two Paise Only

10 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 30 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

11 13.17.1 12mm cement plaster of mix: 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement Sq.M 13.41 203.6 Rs. Two Hundred Three And Sixty Paise Only

12 13.82.1+ 13.81.3 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) :Applying primer coat : With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works Sq.M 3.24 118.1 Rs. One Hundred Eighteen And Ten Paise Only

13 24.1.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge,upto 90 metre depth below ground level:All types of soil:300 mm dia M 10 486.8 Rs. Four Hundred Eighty Six And Eighty Paise Only

14 24.3.2 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges,fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge:150 mm nominal size dia M 5 660.1

15 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818,including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge:150 mm nominal size dia M 10 673.5 Rs. Six Hundred Seventy Three And Fifty Paise Only

16 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum 0.31 1188.9 Rs. One Thousand One Hundred Eighty Eight And Ninety Paise Only

17 24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum 0.98 1195.6 Rs. One Thousand One Hundred Ninety Five And Sixty Paise Only

18 24.13.2 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of:150 mm dia Each 1 210.7 Rs. Two Hundred Ten And Seventy Paise Only

19 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete:150 mm clamp Each 1 1531.4 Rs. One Thousand Five Hundred Thirty One And Fourty Paise Only

20 Extra cost of brick 100A (a) Bhagalpur Per %o 1.416 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

21 Extra cost of slag cement (b) Bhagalpur Per bag 27 11.03 Rs. Eleven And Three Paise Only

22 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 1.416 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

23 Do--do-- (b) Coarse sand ( Lead 70 Km pucca from Chandan river to work site) Cu.M 0.84 Rs. One Thousand Four Hundred Fourty Nine And Fifty Paise Only

24 Do-do- (b) Stone chips Lead 80 pucca from Mirzacheuki to work site ) Cu.M 0.36 Rs. One Thousand Six Hundred Twenty Eight And Seventy Paise Only

25 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 2.18 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Rs. Sixty Eight Thousand Nine Hundred Eighty Five Only

Numbers of item 25 (Twenty five)

Campus Development

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.25(a) Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead. cum 83.41 411.7 Rs. Four Hundred Eleven And Seventy Paise Only

2 11.77 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. Sq.M 111.52 721.1 Rs. Seven Hundred Twenty One And Ten Paise Only

Rs. One Lakh Fourteen Thousand Seven Hundred Fifty Seven Only

Numbers of item 02 (Two)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 1.12 f.s.o.r Plantation work ( 10 gram DAP and pesticide per plant). Transportation of plant and planting work from temporary plant salad. Plantation 20 man days, Transportation of Plant - 6 man days, DAP - 260/- persicide - 100 Rs, etc - 50/- Each 30 5.43

2 3.5.1 F.S.O.R Provision for plant transportion by tractor. Per %o 0.3 1000 Rs. One Thousand Only

3 6.3 f.s.o.r Providing bomboo barricating. Each 30 100 Rs. One Hundred Only

4 6.4.1 f.s.o.r Purchase of earth and round 152.5 [email protected]/cft per % no plants. Each 3 1062.5 Rs. One Thousand Sixty Two And Fifty Paise Only

5 9.2 f.s.o.r Labour for planting. Each 30 15.7 Rs. Fifteen And Seventy Paise Only

6 9.2.3 f.s.o.r (A) Suppling and providing plants all as following details (10 feet) Each 3 250 Rs. Two Hundred Fifty Only

7 9.2.3 f.s.o.r (B) Suppling and providing plants all as following details (10 plant's) Each 3 2000 Rs. Two Thousand Only

Rs. Tthirteen Thousand Eight Hundred Seventy One Only

Numbers of item 07 (Seven)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

I FIRE HYDRANT SYSTEM

1 Providing and fixing M.S. pipe as per IS:1239 ( Heavy Class) complete with all fittings like unions, couplings, bends, elbows, trees, offsets, reducers, flanges, etc. as per requirement at site including painting with two coats of synthetic enamel paint, cutting and making good the walls complete. Pipe up to 50 mm dia will be with threated joints with hold tight and 65 mm dia. And above will be with welded joint.The cost shall include the MS/GI structural supports as per approved drawing and specifications. (b) 100 mm dia M 24 2172 Rs. Two Thousand One Hundred Seventy Two Only

2 Providing and fixing M.S. pipe as per IS:1239 ( Heavy Class) complete with all fittings like unions, couplings, bends, elbows, trees, offsets, reducers, flanges, etc. as per requirement at site including painting with two coats of synthetic enamel paint, cutting and making good the walls complete. Pipe up to 50 mm dia will be with threated joints with hold tight and 65 mm dia. And above will be with welded joint.The cost shall include the MS/GI structural supports as per approved drawing and specifications. (a) 80 mm dia M 12 1566

3 Providing and fixing ISI marked SS-304 fire hydrant valve 80 mm inlet with single outlet and fitted with63 mm dia instantaneous female coupling on the outlet complete including companion flanges, pvc black cap and chain nuts, bolts and 3 mm thick compressed asbedstos gasket at locations as per drawing (inlet flange as per IS:5290-1969 Class C) Each 2 8585 Rs. Eight Thousand Five Hundred Eighty Five Only

4 Providing and fixing first aid fire hose reel drum wall mounting & swinging type fitted with 20 mm dia 36.5 m long high pressure hose as per IS: 5132 with 5 mm outlet 55 nozzle with shut off valve (IS:884-1969). Each 2 10605 Rs. Ten Thousand Six Hundred Five Only

5 Providing and fixing 63 mm dia 15 m long EPDM lined fabric hose including SS male and female instantaneous type coupling approved by fire authority, machine wound with copper wire complete in all respects. Hose shall conform to IS: 636 Type II and coupling to IS: 903-1975 with ISI certification. Each 3 8075 Rs. Eight Thousand Seventy Five Only

6 Providing and fixing standard shot size SS branch pipe with nozzle 16 mm dia. Outlet with standard instantaneous type 63 mm dia. Coupling ISI marked. Each 3 3535 Rs. Three Thousand Five Hundred Thirty Five Only

7 Providing and fixing 25 mm dia brass ball valve full bore type with lever and screwed female ends. (20kg/sq.cm) Each 2 1566 Rs. One Thousand Five Hundred Sixty Six Only

8 Providing and fixing fire hose cabinet fabricated from 16 gauge M.S. sheet with single glazed front door and pad locking arrangement, painted Fire Red with stove enaveled pain t and FIRE HOSE written on front including necessary supports (to house one length of canvas hosed with couplings, branch pipe and nozzle). Each 3 4545 Rs. Four Thousand Five Hundred Fourty Five Only

9 Providing and fixing cast iron butterfly valves on PN 1.6 rating complete with bolts, nuts, 3 mm thick compressed asbestos gasket,companion flanges and complete in all respects. (a) 100 mm dia with lever operated. Each 2 9292 Rs. Nine Thousand Two Hundred Ninety Two Only

10 Providing and fixing cast iron butterfly valves on PN 1.6 rating complete with bolts, nuts, 3 mm thick compressed asbestos gasket,companion flanges and complete in all respects. (a) 80 mm dia with lever operated. Each 2 7662 Rs. Seven Thousand Six Hundred Sixty Two Only

11 Providing and fixing C.I.double flanged horizontal dual plate water type non return valves PN 1.6 including washer, nuts, bolts, 3 mm thick compressed asbestos gasket with companion flanges, complete in all respect. (a) 100 mm dia Each 2 10897 Rs. Ten Thousand Eight Hundred Ninety Seven Only

12 Providing and fixing 25 mm dia gun metal single acting air release vale with screwed inlet tested for 20 kg./cm2 Each 1 1566 Rs. One Thousand Five Hundred Sixty Six Only

13 Providing and fixing 150 mm dia Three-way Fire brigade connection consisting of 63 mm dia instantaneously male coupling and a check vale protected b, cap scored with a chain glass bore etc. complete with 150 mm sluice valve and 150 mm non return valve (to be connected to riser). Each 1 9595 Rs. Nine Thousand Five Hundred Ninety Five Only

II HAND APPLIANCES (INTERNAL) Rs. Only

14 Providing and fixing Stored pressure Multipurpose fire extinguisher consisting of welded M.S. cylindrical body, squeeze lever diccharge valve, 30 cms long high pressure discharge hose ISI marked as per IS:15683 including fixing to wall with brackets etrc. complete. (a) Capactity 6 kg. Each 12 6565 Rs. Six Thousand Five Hundred Sixty Five Only

15 Providing and fixing CO2 extinguisher consisting of seamless MS cylindrical body squeeze lever discharge valve, internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle ISI marked as per IS 13869 including fixing with dash fasteners etc, complete. Capacity 4.5 Kg Each 2 7878 Rs. Seven Thousand Eight Hundred Seventy Eight Only

III FIRE PUMPS & ACCESSORIES Rs. Only

16 Providing and fixing horizontal split casing single/multi stage, single/multi outlet pumping set with bronze impeller with C.I. body and connected by a flexible coupling to a totally enclosed fan cooled induction motor mounted on a common structural base plates with all pump accessories complete as per specifications incluidng pressure gauges with gunmetal isolation valves and anti vibration pads, motor to be suitable for 415 volts, 3 phase, 50 cycles A.C. supply (Specifications as per fire fighting requirements and on the pattern of TAC or local authority approval) as per instruction with starter & cabling and starter to be placed at ground level:- Type : Mono block, Speed(rpm) : 2900, Capacity : 450 lpm & Head:20 Mtr. Each 1 121200 Rs. One Lakh Twenty One Thousand Two Hundred Only

17 Supply, laying & connecting with terrace upmp to starter at ground level with 3.5 core x 16 sq.mm armoured aluminium cable 1.1 kv grade M 90 285 Rs. Two Hundred Eighty Five Only

IV FIRE ALARM SYSTEM Rs. Only

18 Suppy, installation, testing and commissioning of fire alarm control panel with LCD display having battery charger & battries of 2 zone capacity Each 1 17544 Rs. Seventeen Thousand Five Hundred Fourty Four Only

19 SITC of manual call point. Each 6 1061 Rs. One Thousand Sixty One Only

20 SITC of hooter with flasher Each 6 1263 Rs. One Thousand Two Hundred Sixty Three Only

21 Supply and laying of 1.5 sq.mm double core copper wire with 15mm dia conduit pipe. Mtr 425 232 Rs. Two Hundred Thirty Two Only

Rs. Five Lakh Ninety Nine Thousand Two Hundred Thirty Four Only

Numbers of item 21 (Twenty one)

Electrification Work

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

1 1.3.3 Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm FR PVC insulated Copper conductor single core cable in surface/ recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. Box etc. as required. (a) Group C Per Point 161 1146 Rs. One Thousand One Hundred Fourty Six Only

2 1.4 Wiring for twin control light point with 1.5 Sq.mm FRLS PVC insulated Copper conductor single core cable in surface/ recessed medium class PVC conduit, 2 way modular switch,modular plate, suitable size G.I. Box etc. as required. Per Point 4 1248 Rs. One Thousand Two Hundred Fourty Eight Only

3 1.5 Wiring for light/Power plug with 2x4 Sq.mm FR PVC insulated Copper conductor single core cable in surface recessed PVC conduit along with 1 No. 4 sq.mm. FR PVC insulated copper conductor single core cable for loop earthing as required. Per Mtr. 689 309

4 1.7.2 Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. CKT- (2 x2.5mm2 + 1x2.5 mm2 earth wire) Per Mtr. 645 246 Rs. Two Hundred Fourty Six Only

5 1.7.12 Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (4x10 mm2 + 1x6 mm2) Per Mtr. 62 925 Rs. Nine Hundred Twenty Five Only

6 1.7.13 Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (4x16 mm2 + 1x6 mm2) Per Mtr. 52 1312 Rs. One Thousand Three Hundred Twelve Only

7 1.7.14 Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (4x25 mm2 + 1x16 mm2) Per Mtr. 5 2235 Rs. Two Thousand Two Hundred Thirty Five Only

8 1.25 Supplying and fixing stepped type electronic fan regulatoron th existing modular plate switch box including connections but excluding modular plate etc. as required. Each 24 358 Rs. Three Hundred Fifty Eight Only

9 Sl. No. 1.28.6+ 1.27.6+ 3x1.24.4+ 3x1.24.1+ 1.24.5+ 1.24.3+ 2318+ 2.12.1 Supplying and fixing following Modular base and cover plate on existing modular metal boxes etc. as required. 12 Module : Supplying and fixing following size/ modules, GI box along with modular base and cover plate for modular switches in recess etc as required. 12 Module (200mmX150mm) :Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch, 6 pin, 15/16 amps socket outlet:15/16 amps switch : Pilot lamp for indicator : upplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 6/32 amps, Single pole (For used as computer terminal. Each 24 2067.9 Rs. Two Thousand Sixty Seven And Ninety Paise Only

10 1.31 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. Each 48 414 Rs. Four Hundred Fourteen Only

11 1.32 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. Each 20 531 Rs. Five Hundred Thirty One Only

12 1.33 Supplying and fixing 2 Pin, 6 amps ceilling rose on the existing Junction box / wooden block including connection etc. as required. Each 82 64 Rs. Sixty Four Only

13 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. Each 58 80 Rs. Eighty Only

14 2.4.6 Providing and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required. 250 amps, 35 KA Each 1 19613 Rs. Nineteen Thousand Six Hundred Tthirteen Only

15 2.5.4 Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections, earthing the body etc. as required. 31s/300 A Each 1 12883 Rs. Twelve Thousand Eight Hundred Eighty Three Only

16 2.7.6 Providing and fixing following capacity four pole ON-load panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required. 200 A Each 1 18271 Rs. Eighteen Thousand Two Hundred Seventy One Only

17 2.9.1 Suppling and fixing following way horizontal type three pole and neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnection, powder painted including eathing, etc. as required (But without MCB/RECB./ Isolator) 4 way ( 4 + 12 ), Double door, horizontal type Each 8 4184 Rs. Four Thousand One Hundred Eighty Four Only

18 2.12.1 Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 6/32 amps, Single Pole Each 96 237 Rs. Two Hundred Thirty Seven Only

19 2.12.8 Supptying and fixing following rating, 24Al4L5 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required' 40 A to 63 A, TP&N Each 8 2329 Rs. Two Thousand Three Hundred Twenty Nine Only

20 2.19 Suppling and fixing 20 Amps 240 volt. SPN industrial type socket out let, with 2 pole and earth, metal enclosed plug tope along with 20 amps "C" curves, SP. MCB, in sheet steel enclosure on surface or in recess, with chained metel cover for the socket out let and complete with connection testing and commissioning etc. as required. Each 9 1513 Rs. One Thousand Five Hundred Tthirteen Only

21 2.2 Providing and fixing M.V. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required. Each 3 214 Rs. Two Hundred Fourteen Only

22 3.13 Supplying and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.l. pipe from earth electrode including connecion with copper thimble excavation and refilling etc. as required. Metre 7 367 Rs. Three Hundred Sixty Seven Only

23 3.21 Providing and fixing 4.0 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. Set 1 16675 Rs. Sixteen Thousand Six Hundred Seventy Five Only

24 5.1 Supplying and fixing 4'X18 wat[ LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS pVC insulated copper conductor etc. as required. Each 43 521 Rs. Five Hundred Twenty One Only

25 5.7.3 Supplying and fixing recess mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 12 watt Each 3 1224 Rs. One Thousand Two Hundred Twenty Four Only

26 5.9 Supplying and fixing recess mounted 36 watt LED flat panel (2' X 2') with minimum efficacy 100 lm/w which privides soft light and glare free symmetrical illumination suitable for armstrong/grid ceiling and integrated electronic driver etc directly on false ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. Each 18 2663 Rs. Two Thousand Six Hundred Sixty Three Only

27 5.14.4 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.90 watt Each 4 5516 Rs. Five Thousand Five Hundred Sixteen Only

28 6.1.4 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required9/10 watt LED lamp 12 watt Each 58 161 Rs. One Hundred Sixty One Only

29 7.1.3 Laying of one number PVC insulated and pVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 95 sq. mm and upto 185 sq. mm Metre 80 336 Rs. Three Hundred Thirty Six Only

30 7.7.11 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.95 sq. mm, 3.5 core Metre 90 950 Rs. Nine Hundred Fifty Only

31 8.4.1 Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 32 mm dia Metre 5 543 Rs. Five Hundred Fourty Three Only

32 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulatorand complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) Sft 16 1809 Rs. One Thousand Eight Hundred Nine Only

33 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. Each 1 6536 Rs. Six Thousand Five Hundred Thirty Six Only

34 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 24 2482 Rs. Two Thousand Four Hundred Eighty Two Only

35 8.17.1 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 300 mm sweep Each 15 2572 Rs. Two Thousand Five Hundred Seventy Two Only

Lighting Conductor

36 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc.as required. Set 1 16675 Rs. Sixteen Thousand Six Hundred Seventy Five Only

37 4.1 Providing and fixing of lightning conductor final made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes tec. Complete as required. Each 2 1056 Rs. One Thousand Fifty Six Only

38 4.5 Providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For Horizontal run) Metre 43 516 Rs. Five Hundred Sixteen Only

39 4.6 Providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For vertical run) Metre 16 559 Rs. Five Hundred Fifty Nine Only

Rs. Tthirteen Lakh Fifty Nine Thousand Five Hundred Ninety Nine Only

Numbers of item 39 (Thirty nine)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

1 EXECUTIVE TABLE Table with ERU and Pedestal 1800 mm x 750 mm x 750 mm with KBPT, CPU Trolley - Structure / Frame of table - Four legs with modesty panel. The type of Storage provided- One side pedestal unit and E.R.U. Footrest-Not Provided.Table top Material- Prelaminated particle board (Wood Product) of grade II type II of IS 12823/Lates Thickness of table top material - 25 mm. Gable end material- Prelaminated particles board(wood product) of grade II type III of IS 12823/ Latest. Modesty panel material- Three Layer Prelaminated particles board (wood product) of grade II type III of IS 12823/Latest. The thickness of the modesty panel material- 18 mm. Leg Material- Mild Steel (MS) ERW. The thickness of the Leg material- 1.2 mm. Width of tabletop - 1800 mm. Depth of table - 750 mm. Height of table - 750 mm. Size (L x W) /diameter of leg material - 25 mm . ERU unit consists of - Each 1 38205.2

1 storage unit with shutter. Total Number of drawers /storage in Pedestal units- Three drawers. Table top finish- Laminate in color with swede finish 0.6-0.8mm thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/ Latest with having balancing laminate of 0.5mm thick on another side Tabletop shade- Gray. Table / ERU / Pedestal Panel Plain Side Edge to be banded with PVC tape - 2 mm thick with the help of hot melt glue. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate.

2 EXECUTIVE CHAIR High Back Knitteed Chair- Tilt mechanism - Synchronic tilt mechanism. Backrest type - Tilting type. Pedestal Base - Nylon Minimum density of foam used in seat- 30 kg per cubic meter Minimum thickness of PU foam used in seat - 30 mm Seat upholstery material- Fabric. Backrest base frame material - Hot pressed plywood. Padding at backrest - PU foam The minimum density of foam used in the backrest- 30 kg per cubic meter. Minimum thickness of PU foam used in backrest 30 mm . Backrest upholstery material - Fabric. Upholstery material thickness / fabric substance used in seat /backrest - 0.7 to 1.5 mm ( for fabric). Minimum width of seat 500 mm . Minimum depth of seat- 450 mm Minimum width of backrest - 450 mm . Backrest height- High back (551 and above). Minimum pedestal size (diameter) - 650 mm . (Green Guard by U/L). Dimension variation of ± 5mm shall be acceptable. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 1 16231.6 Rs. Sixteen Thousand Two Hundred Thirty One And Sixty Paise Only

3 OFFICE TABLE Table with KBPT, CPU Tolley - made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size- 1199 X 590 X 735 mm with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock. (Green Guard by U/L, Griha Certificate). Dimension variation of ± 5 mm shall be acceptable. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 23 25446.3 Rs. Twenty Five Thousand Four Hundred Fourty Six And Thirty Paise Only

4 STAFF CHAIR (S TYPE) CHAIR- Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size - 46.0 cm ( W ) X 27.0 cm ( H ). Seat Size- 46.0 cm ( W ) x 40.0 cm ( H ). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame. Width of the chair- 58 cm, Depth- 56.5 cm, Height- -87.5 cm, Seat Height- 48 cm. Dimension variation of ± 5mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 12 7087.3 Rs. Seven Thousand Eighty Seven And Thirty Paise Only

5 VISITOR CHAIR Chair Type - Non-Revolving and Non-Tilting chair without Armrest. Chair frame type- Cantilever. Armrest type- Without Armrest. Seat type - Padded. Backrest type - Padded Frame, Material Configuration - One piece. Frame material - Steel tube (ERW quality) conforming to IS: 1161 (with latest Amendment). Seat material - Moulded Plywood. Seat material thickness - 20 mm. Polyurethane foam used in seat. Seat upholstered with -N.A . GSM of seat cover - 390 GSM . Backrest material- Moulded Plywood . Backrest upholstered with- Leatherette. Seat Depth 390 mm . Seat Width - 440 mm Seat height from floor surface - 475 mm Backrest width 390 mm . Backrest height from seat - 300 mm . Paint Type- Epoxy. CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018. Dimension variation of ± 5 mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 4 4004 Rs. Four Thousand Four Only

6 ALMIRAH Storage of Size- 1980mm ( H ) x 900mm ( W ) x 500mm ( D ) - Type of Almirah Steel- Almirah steel welded with shelving cabinet. Nmber of Door - 2. Number of shelves - 04. Powder Coating - with 50 micron thickness minimum. Bod- Body panels are made fom combination of 0.5 and 0.6mm CRAC. Hardware - Main shutter Lock- 3 way 90 degree removable key type cam lock & locking mechanisam. Dimension variation of ± 5 mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate, Green Guard by U/L and BIS Certficate.. Each 12 33458.7

7 RECEPTION TABLE Reception Table of size 5' Liner of size 1500 mm (W) x 870 mm (D) x 1080 mm (H) -Work Surface -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Wire Management - Power box made with 0.8 mm thick CRCA ( IS: 513 ), with switch plate (8+3 Module cutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel & Side Skirting - Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. TOP shelf-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Each 1 70297.7 Rs. Seventy Thousand Two Hundred Ninety Seven And Seventy Paise Only

Hinge Door + Drawer unit - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. **Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security. Essential Accessories - Wire Riser made of 0.8 mm CRCA ( IS-513 ) is provided for proper wire management. Organizer Plate made of 1.2mm CRCA ( IS-513 ) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA ( IS-513 ) is provided for bag hanging. The product should be Greenguard UL certified. .Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate, Green Guard by U/L ..

8 RECEPTION CHAIR Mid Back Chair - Size- 700 mm ( W ) x 1055 mm ( H ) x 700 mm ( D). Seat Upholstry- Fabric.Back Upholstry- Fabric. Seat Height- 538 mm. Warranty- 3 Years. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0 cm pitch-center dia. (76.0 cm with castors.) TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level 2, Indoor Advantage Gold Certificate, Each 4 11017.6 Rs. Eleven Thousand Seventeen And Sixty Paise Only

9 SOFA (3 SEATER) 3 Seater Sofa-1710 mm ( W ) x 820 mm ( D ) x 850 mm ( H ) Frame Structure Material - 19 mm commercial board, Seat Cusion Material-foam, Type of Spring in the Base / Seating- web suspension, Type of Sofa and Backrest- Seat and Backrest are permanently fixed with the frame Structure, Frame Covering- Fully Upholstered, Density of Cushion of Backrest Material (Kg/Cubic M) - 32, Covering Material for Seat and Backrest-Leatherite.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate, Each 4 27967.5 Rs. Twenty Seven Thousand Nine Hundred Sixty Seven And Fifty Paise Only

10 CENTRE TABLE COFFEE TABLE - Number of storage under top Double storage (one at upper portion and one at bottom portion) Top material - Other wood. Frame material - Other wood Dimension of Top ( Length X Breadth, or Diameter) 900 mm X 600 mm . Height of centre table- 450 mm .Thickness of top material - 18 mm . Thickness of frame material - 19 mm. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate, Each 2 12312.3 Rs. Twelve Thousand Three Hundred Twelve And Thirty Paise Only

11 REVOLVING CHAIR Mid Back Chair - Size- 700 mm ( W ) x 1055 mm ( H ) x 700 mm ( D ). Seat Upholstry- Fabric.Back Upholstry- Fabric. Seat Height - 538 mm. Warranty- 3 Year. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0 cm pitch-center dia. (76.0 cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate, Each 3 11017.6 Rs. Eleven Thousand Seventeen And Sixty Paise Only

12 RO Water Purifier 50 Litre RO water purifier inbuilt RO UV purification water coolers, Body Material stainless steel, cold water temperature-15 to 45 Degree C, Cooling capacity - 60 LPH, No of faucets-2, Refrigerant-R134a, Current-4.5 +-10%A, voltage-230 +-10% V AC, Frequency-50 Hz, 1 Phase, RO purification, 7 stages of filtration, fully automatic, faster cooling Low Power Consumption, High output Each 2 44579.7 Rs. Fourty Four Thousand Five Hundred Seventy Nine And Seventy Paise Only

Grand Total Including GST

*** Note:-Dimension variable upto ± 30 mm is acceptable.

G E N E R A L A B S T R A C T

NAME OF WORK : CONSTRUCTION OF PROSECUTION OFFICE BUILDING AT NAUGACHHIYA IN THE DISTRICT OF BHAGALPUR - WITH ELECTRIFICATION Job No. GROUP- 02 OF e-N.I.T. No. 20 /2026-27

Date of Tender :-

Estimated Cost in Rs. :-

Earnest Money in Rs. :-

Time of Completion :- Months

Cost of BOQ in Rs. :- 10000

Bid processing fee through online mode:- As per eproc 2.

SL. NO NAME OF WORK TOTAL Rs P

4 Deep Tubewell

5 Approach Road

6 Rain Water Harvesting System

7 Campus Development

9 Fire fighting

Add GST @ 5.36%

10 Electrification Work

Enclosure-B.O.Q's ORDER

(1) B.O.Q. amounting to Rs.

Rs. One Crore Eighty Lakh Four Thousand Four Hundred Fourty Seven Only

detailed as above for Scheduled items, is herewith approved.

Junior Engineer Asstt. Engineer Executive Engineer Superintending Engineer, BOQ BOQ BOQ Work Circle-02