New Construction work of Service Road of 10 Meter wide around Goverdhan Parikrama Marg in Distt Mathura

Amount

Construction of embankment with approved (Carted Earth) material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. as per MORT&H specification 3.16

Construction of embankment with approved materials (Earth) deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2 including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. SI NO 3.17

Providing, laying spreading & compacting of granular sub-base by providing closed graded (Gr-1) materials From aproved quarry, spreading in uniform layers with Motor Grader on prepared surface, mixing by mix in placed method with Rotovator at OMC and with 2% cement OPC compacting with Vibratory Roller to achieve the desired density, complete as per MoRT&H clause 401 & as directed by Engineer Incharge including all machinery charges & including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge.

Providing, laying, spreading and compacting graded stone aggregate From aproved quarry, wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. As per MORT&H specification 406

Providing and applying primer coat with emulsion (S.S) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. As per MORT&H specification 502 (5.01)

Providing and applying tack coat with bitumen (VG-10) using Bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. As per MORT&H specification 503 (5.02)

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading From aproved quarry, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. as per MORT&H specification clause No. 507 complete in all respects

Construction of granular sub-base by providing close graded Material From aproved quarry, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. as per clause 401.

Construction of sub-grade and earthen shoulders with approved material Carted Earth obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. as per MORT&H spec. 305 (3.18)

Construction of Drain, Hume Pipe and RCC culvert. Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth upto a distance of 30m from the foundation trenches including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. As per S.I. No. 4.1.1

Providing and laying cement concrete in 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work. in Foundation and floors including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. As per S.I. No. 4.1.8

Class-150 brick work in 1:4 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. As per S.I. No. 6.1.1

Reinforced Cement Concrete (M-20) in Open Foundation complete including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. as per MORT&H Specifications 12.08C Case II

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. as per Drawing and Technical Specifications. As per MORT&H spec. 9.07(1600).

Flush Pointing on brick work on eadge floor with cement mortar 1:2 (1cement :2 coarse sand) including supply of all materials, labour and T&P etc. required for proper completion of the work including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. As per S.I. No. 578.

Supply and Laying of 350mm dia NP-3 Hume pipe etc. complete. as per specification and including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge.

Supply and Laying of 600mm dia NP-3 Hume pipe etc. complete. as per specification and including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge.

Supply and Laying of 1000mm dia NP-3 Hume pipe etc. complete. as per specification and including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. as per MORT&H speci. 12.10

Plain/Reinforced Cement Concrete (M-15 PCC) in Open Foundation complete including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. as per MORT&H Specifications. 12.08 A

Reinforced Cement Concrete (M-30) in Open Foundation complete as per Drawing and including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. Technical MORT&H Specifications 12.08G Case-II.

PCC M15 Grade leveling course below approach slab complete as per drawing and including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. Technical specification 14.10 (2700).

Furnishing and Placing Reinforced/ Prestressed cement concrete (RCC Grade M 30) in super-structure including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. as per MORT&H Specification. 14.01C

Supplying, fitting and placing HYSD bar reinforcement in super-structure complete including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. as per MORT&H specifications. 14.02 (1600).

Back filling with granular material behind abutment, wing wall and return wall complete including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. as per drawing and Technical MORT&H Specification 13.09

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MORT&H specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. as per drawing and Technical Specification 13.10

Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. technical MORT&H specifications 14.06

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. as per drawing and Technical Specifications 13.08

Drainage Spouts complete as per drawing and including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. Technical specification 14.09

Providing & fixing 2 mm thick corrugated copper plate in expansion joint complete as per drawing & including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. As per Technical MORT&H Specification 14.17 (2605).

Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. as per MORT&H specification 804 (8.14) (i)

Reinforced cement concrete M15grade hectometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc including cost of all material, Labour T&P and all taxes but excluding GST complete As per direction of Engineer in charge. as per MORT&H specification 804 (8.14) (iii)

SRS EXPRESS PRIVATE LIMITED

SHARMA CONSTRUCTION PROJECT PVT LTD