REPAIRS, MAINT OF MD ACCN AND CLEANING OF MANHOLES, SEWAGE LINE, SEPTIC TANK INCLUDING REPLACEMENT OF SEWAGE LINE AGE BR -I AREA

Amount

Demolition of cement concrete (unreinforced) in ground floors & pavings n exc 15 cm thickness below or above ground level including removal of debries out of MoD land complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation/ filling and mass concrete and sub base of floors complete all as specified and directed.

M&L for 25 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in levelling course of sub base finished even and rough to receive the topping layer complete all as specified and directed.

M&L for joint free non - skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed layer in CM 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing of rubbish off the premises complete all as specified and directed.

All as per Srl item No.4 above but in dado / skirting etc over 10 mm thick rendering in CM 1:4 -ditto-

M&L for vitrified Ceramic tiles 10mm thick (square/rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed layer in CM 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing of rubbish off the premises complete all as specified and directed.

All as per Srl item No.6 above but in dado / skirting etc over 10 mm thick rendering in CM 1:4 -ditto-

M&L for non-skid coloured ceramic tiles 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match coiour/shade of tiles laid over and including 15mm thick screed bed layer in CM 1:6 including dismantling floor tiling including cement mortar bedding (but not backing) and removing of rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic joint free coloured tiles of size 600mm x 300mm x 7mm thick on vertical surfaces such as skirting, dado, etc., laid over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade /colour of tiles including dismantling wall tiling including cement mortar bedding (but not backing) and removing of rubbish off the premises complete all as specified and directed.

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.

S&F 15mm Galvanised Mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors including taking down 15 mm dia GI tubing and connections complete all as specified and directed

Taking down and re-fixing only 15mm GI tubing medium grade to walls and ceilings or laying in floors complete all as specified and directed

S&F 20mm Galvanised Mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors including taking down 20 mm dia GI tubing and connections complete all as specified and directed

Taking down and refixing only 20mm GI tubing medium grade to walls and ceilings or laying in floors

S&F in repairs vitreous China squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend etc complete all as specified and directed.

S&F in repairs vitreous China WHB white flat back size 550mmx400mm including Supplied and fixed angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers, Coupling and down take waste piple ; including bedding in CM on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs stainless steel plate rack of Size 900 x 600x 250mm complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks capacity 500 litres, ISI marked three layered wall construction (cylindrical vertical with closed top) hoisted and fixed in position and including dismantling of old unserviceable water tank and removing from site complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks capacity 1000 litres, ISI marked three layered wall construction (cylindrical vertical with closed top) hoisted and fixed in position and including dismantling of old unserviceable water tank and removing from site complete all as specified and directed.

S&F 20mm Ball valves, high pressure of PTMT with high density plastic bass screwed for iron pipe and fixed (min wt 20mm - 210 gms) complete all as specified and directed.

S&F in repairs 20mm dia bore Gun metal, Globe or gate valves, with iron head or lever screwed both ends for iron pipe fixed, complete all as specified and directed.

S&F in repairs bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S&F in repairs angle valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup screwed both ends for iron pipe or for unions 15 mm bore, complete all as specified and directed.

S&F in repairs concealed stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repairs PVC connections 15mm bore size 450 in length with both end brass/pvc high quality nuts complete all as specified and directed.

S&F in replairs brass chromium plated shower rose fancy type , as approved , with or without swivel joints, including fixing to steel pipe fixed in repairss complete all as specified and directed..

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frame (with out taking off shutters from the frames) exc 1.50 Sqm but not exc 4 Sqm each with shutters complete all as specified and directed

Taking down shutters of any description exc 1 Sqm but not exc. 2 Sqm each complete all as specified and directed

Taking down shutters of any description not exc 1 Sqm complete all as specified and directed

S&F second class hardwood plain, solid, straight chowkhat and frames wrought framed rebated on the solid, rounded on the solid or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 30 mm thick second class hard wood plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F 35 mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (w/o sash bars) edges of farrming plain chamfered or rounded fitted with cut and mitred beads for securing glass etc ,size of member of shutter as specified in SSR Part -I ,section 8,clause 8.20 (a) complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nomiral dia and wire and average width of aperture 1.40 mm fixed with SS staples complete all as specied and directed.

S&F factory made PVC door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm Prelam PVC sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member) complete all as specified.

S&F factory made soild PVC moulded door shutter, 28mm to 30 mm thick (stiles) with wood free EPS with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour sheet on back incl 3 Nos 100 mm stainless steel butt hinges complete all as specified and directed.

Taking down shutters & refixing in same opening exc 1 Sqm & n. exc 2 Sqm including easing and adjusting and refixing builder hardware including renewal of unserviceable screws complete all as specified and directed

Cutting holes in brick walls in cement mortar or cement lime mortar and stone wall built in lime mortar for inserting holdfasts in exc. One brick but not exc. two brick wall and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

M&L for PCC 1:3:6, type C-1 (using 20mm grade stone aggregates) for bed blocks of hold fast, etc complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilators with top hung shutter including two pairs of mild steel cup pivots, catch spring and pulley wheel complete all as specified and directed.

M&L for 18 mm to 20 mm thick Granite slab of any shade ( table rubbed and polished ) machine cut for vertical surface of pillars, floor /shelves in steps, jambs, pillars, window cills& cooking plateforms over and including 15 mm thick screed bed or bedding layer of CM (1:4) including pointing in white/colour cement 1:2 using marble dust with admixture of pigment to match shade of the slabs laid bedded and pointed in any mortor complete all as specified & directed

S&F MS butt hinges 100 mm size medium weight, coled rolled and fixed with screws complete all as specified and directed.

S&F MS butt hinges 125 mm size medium weight, coled rolled and fixed with screws complete all as specified and directed.

S&F stainless steel butt hinges 100 mm and fixed with screw complete all as complete all as specified and directed.

S&F 200 mm size Aluminium anodised barrel tower bolt of extruded section and fixed with screws complete all as specified and directed.

S&F 125 mm size Aluminium anodised barrel tower bolt of extruded section and fixed with screws complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type., anodised Size of handle 150 mm fixed with steel screws complete all as specified and directed.

S&F 250mm long Aluminium alloy anodised Sliding door both with hasp, staple( bolt type) and fixed clips of sheet , cast or extruded sections and fixing bolts and sliding of extruded sections or cast -aluminium alloy and fixed with steel screws complete all as specified and directed.

S&F mild steel 150 mm, ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 4mm thick Sheet glass pin head type fixed wdn beads / oil putty in square n. ex 0.50 sqm in each pane complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coal of red oxide / zinc chrome surfaces of any description, over 10cm width or girth, not otherwise described complete all as specified and directed

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wood or wood based surface of any desription over 10 cm width or girth by removing all splashes, drops, dirt etc and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for prepration of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint on existing steel surface complete all as specified and directed..

S&F 3mm thick sheet glass ordinary quality frosted on side fixed wdn beads / oil putty in square n. ex 0.50 sqm in each pane including hacking out old broken glasses (any thickness size qualityor description) from wdn frames or fixed with beads complete all as specified and directed.

S&F in repairss stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tack or stainless steel wire staple complete all as specified and directed.

Taking down cement plaster from brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc and removing of rubbish off the premises complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 including demolition of brick work or stone/boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of rubbish off the premises complete all as specified and directed.

M&L for brick work with sub class 'B' brick in cement mortar 1:4, straight or curved on plan to any radius in half brick thick wall including demolition of brick work or stone/boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of rubbish off the premises complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 brick work / Concrete / Stone surfaces finishing the surfaces fair and even complete all as specified and directed

M&L for two coat of cement plaster on stone or brick masonary wall surfaces ,first coat 10mm thick in CM 1:6 and second coat cement plaster 10 mm thick in CM 1:4 with including WPC @ 3 % by the weight of cement, finished even and fair without using extra cement complete all as specified & directed. Note:- WPC shall be paid seperately under respective item

M&L for rendering 10 mm thick cement plaster in CM 1:3 on concrete surfaces as in ceiling finished even and fair (without using extra cement) complete all as specified and directed

Supply only integral water proofing compound, completeall as specified and directed.

M&L for 75 mm thick PCC 1:2:4, type B-1 (using 20mm graded stone aggregates) as in plinth protection finishing cement concrete surface even & smooth without using extra cement complete incl forming construction joint 10mm x 20mm filled with bitumen and coarse sand mortar all as specified and directed

M&L for 60mm thick machine made coloured precast concrete interlocking paver block, rubber moulded with grey cement and pigment any shape and size confirming to IS 15658 - 2006 of M-35 grade, laid over and including stone dust cusion not less than 50mm thickness complete all as specified and directed

M&L for cleaning of septic tank of any capacity by mechnical means including vaccume suction, taking off suitable capacity fitted with vaccume sunction pump of capacity not less than 15 cum/hr and deposited the sludge and water outside the MOD land complete all as specified and directed upto entire satisafaction of Engr-in-charge.

M&L for cleaning of sewage line SWG/CI pipe/ RCC pipe/PVC pipe etc vertically/horizontally of dia n.exc 200 mm by rodding and well flushing by using sufficient water and making it clear for easy flow of sewage from WC, gully trap, Nahani trap etc upto the first manhole including desludging of first manhole and making it the proper functional to entire satisfaction of Engineer-in-Charge and removing the sludge, silt away from Bldgs etc upto a distance exc 50 m and n.exc 500 m and burying it in pits and covered with earth complete all as specified and directed upto entire satisafaction of Engr-in-charge

All as per Srl item No 73 here -in-before but length of sewage line cleaned manhole to manhole complete by rodding and well flushing with sufficient water, length of sewage line upto 10 M including desludging of both sides existing manholes complete to entire satisfaction of Engineer-in-Charge.

All as per Srl item No 73 here -in-before but length of sewage line cleaned exc 10 M but n.exc 25 M from manhole to manhole including desludging of both sides existing manholes complete to entire satisfaction Engineer-n-Charge.

Cleaning of blockage of gully traps, Nahani traps, Floor traps incl removing gratings and re-fixing old or new gratings with white cement complete all as directed by Engr-in-charge.

Dewatering of soak well of any dia and depth completely by pumping out the water and removing it to nearby nala where directed complete all as specified and directed by Engineer-in-charge.

Cleaning of man holes of any size and depth by any means and getting out sludge and water and removing to a distance upto 100 mtr and burried into pits covered with 20cm thick soil complete all as specified and directed.

M&L for brickwork with subclass 'B' old size bricks, straright or curved on plan exc 6m mean radius built in cement mortar 1:4 including demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed.

M&L for brick work with subclass 'B' bricks in one brick thick honey comb walling built in CM 1:4 including demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed.

M&L for brick bats using subclass 'B' bricks for loose filling in soak wells etc complete all as specified and directed.

M&L for cutting into existing manholes for (dia 150mm / 200mm) connecting new or old drains making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed

M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on brick work / Concrete surfaces finishing the surfaces even and smooth with out using extra cement complete all as specified and directed.

S&F 110 mm dia PVC(SWR) pipes single soketed in any length with adhesive joints fixed to wall with and including mild steel clamps including taking down old unservicable SWR pipe of any dia complete all as specified and directed

S&F 110 mm dia PVC(SWR) pipes single soketed in any length with adhesive joints laid in trenches including taking down old unservicable SWR pipe of any dia complete all as specified and directed

S&F 75 mm dia PVC(SWR) pipes single soketed in any length with adhesive joints fixed to wall with and including mild steel clamps including taking down old unservicable SWR pipe of any dia complete all as specified and directed

S&F 75 mm dia PVC(SWR) pipes single soketed in any length with adhesive joints laid in trenches including taking down old unservicable SWR pipe of any dia complete all as specified and directed

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F PVC (SWR) bends of bore 110mm with acess door complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia with acess door complete all as specified and directed.

S&F PVC (SWR) junction single ( single T ) equal or unequal 110mm dia complete all as specified and directed.

S&F PVC (SWR) 110 mm dia junction, with acess door single(single 'T') equal or unequal complete all as specified and directed .

S&F 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant cement including PCC 1:2:4 and making good the existing floor complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement complete all as specified and directed.

Demolition of RCC of roof, beams, landing, chajja, cover slabs and similar suspended work complete all as specified and directed.

Demolition of cement concrete of any description and in any position complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in slabs supported on walls as in soak well and septic tank etc complete all as specified and directed.. .

M&L for pre-cast Reinforced Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab of mane hole set in cement mortar 1:4 including demolition of existing broken cover slabs complete all as specified.

M&L for form work to soffits of suspended slabs such as flat or curved roof slabs, floor slabs n exc 200mm thick finished fair or curved concrete surface complete all as specified and directed..

M&L for form work to edges of concrete flats, treads breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 10cm wide and sides of RCC / PCC bands in walls, horizontal or slopping and similar works fair finished concrete surface complete all as specified and directed..

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Gde Fe complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel round bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending as in manhole covers handles, steps, rungs etc complete all as specified and directed.

M&L for cement concrete 1:4:8 type D 2 (using 40 mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide n exc 1.5 m deep in soft/ loose soil for foundation etc or for shaft, wells, manholes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed.

All as per Srl item No.107 above but exc 1.50 M depth not exc 3.00m depth all as specified and directed

Removing excavated soil exceeding 500 m distance and n exc 1.50 km depositing where directed at alevel n exc 1.5 metre above the starting point complete all as specified and directed.

Returning ,filling in including spreading ,levelling watering and well ramming with soil in layers n exc 25 cm thick complete all as specified and directed.

M & L for RCC pipes with socket 150mm bore class NP2 (ISI Marked) laid and jointed with cement mortar complete with collars including demolition and breaking up RCC drain pipes set in cement mortar complete all as specified and directed.

M & L for RCC pipes with socket 200mm bore class NP2 (ISI Marked) laid and jointed with cement mortar complete with collars including demolition and breaking up RCC drain pipes set in cement mortar complete all as specified and directed.

M&L for HDPE double wall corrugated sewage pipe SN-8 as per IS 16908 Part-II 2013 laid in trenches, jointed and tested as per manufacturer instruction for 150 mm bore including demolition and breaking up drain pipes (salt glazed ware) set in cement mortar complete all as specified and directed. Make:Gemini-Tirupati Plastimatics Pvt Ltd, Jaipur (Raj)/ Keshav Kripa Polyplast (LLP), Kishangarh (Raj)/ Supreme Ultra Plus, Mumbai

All as per Srl item No.113 above but 200mm bore -ditto-

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in copings/ bands and benching,floors and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.. .

S&F in repairs vitreous China urinal bowl, flat back of size 465x355x265mm (minimum) white with grating and union for discharge pipe , waste pipe (excluding flushing cistern,flush pipe ) complete all as specified and directed..

S&F in repairs vitreous Chinaware EWC pedastal type closet with white seat & cover with flat bottom with hinging device complete all as specified and directed..

S&F in repairs choromium plated brass health jet foucet suitable for EWC including CP chord and brass nozzle and fixed to pipe complete all as specified and directed.

S&F in repair soap dish brass chromium plated fixed to wall with brass chromium plated screw and wooden/ plastic plug complete all as specified and directed.

S&F in repairs bib taps, cast copper alloy chromium plated fancy type, two way with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

M&L for glazed ceramic joint free coloured tiles size 350mm x 250mm x 7mm/450mm x 300mm x 7 to 8mm thick on vertical surfaces such as skirting, dado, etc.., laid over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade /colour of tiles including dismantling wall tiling including cement mortar bedding (but not backing) and removing of rubbish off the premises complete all as specified and directed.

Treatement for sunken portion is as follows :-

Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed.

M&L for water proofing plaster for sunken portion in CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement.

M&L for applying two coats of Dr fixit compound suitable for sunkun treatment as per manufacturer instructions over vertical surfaces and floors of sunken of toilet including cleaning of surfaces.

M&L for PCC 1:7:12 type D2 using 40 mm graded stone aggregate as in filling (sunken portion). etc.

M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as sub base, 75mm thick on top.

Note :- above includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect.(b) The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with Dr fixit suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated (c) Horizontal flat area to be measered.

M K Construction

SAGAR MOTOR AND TRACTOR CO

EX SERVICE MEN SECURITY AND MAN POWER SERVICES

M/S PRAKASH RAIKWAR TRADERS AND CO