ADDN /ALTN OF BLDG NO. P-06A AND PROVN OF SECURITY ACCESS CONTROL POST NEAR BLDG NO. P-06 OF HQ AFSOD UNDER AGE B/R-I OF GE (WEST) AGRA

Amount

Demolition of cement concrete (unreinforced) in any position not exc 15cm thickness (below or above ground level) complete all as specified and directed. Note : Removal of demolished material shall bemeasured & paid separately.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in padding over roofs, roof kerbs etc complete all as specified and directed.

M&L for cement concrete 1:2:4 , type B-1 (using 20 mm graded mechanically crushed stone aggregate) as in benching in manholes, coping plinth courses, bands stopts etc including necessary use & waste of form work complete all as specified and directed.

M & L for water proofing treatment of roof slab all as followes: - (a) Preparation of roof surfaces by brushing, cleaning. (b) Applying one priming coat with bitumen primer @ 0.5 ltr/Sqm (c) Applying a hot blown bitumen grade 85/25 @ 1.2 Kg/sqm (d) Laying APP modified water proofing membrane weight not less than 3 Kg/Sqm applied bitumen coat. (e) Applying a tack coat of hot bitumen grade 85/25 @ 1.2 Kg/Sqm and spreading sand (confirming to Zone II) in dry condition over the bitumen @1.00 Kg/Sqm

M&L brick tiles 40 mm thick laid over 15 mm thick screed bed in CM 1:3 and jointed in CM 1:3 with linced oil @ 5% by weight of cement complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets in roof coverings complete all as specified & as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour as approved,having tensile strength of 550 Mpa as in roof /cladding , fixed to wall with self tapping screws complete all as specified & directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & as directed.

Dismantling timber scantling 40 sqcm and over in section in any position unframed work complete all as specified and directed

M&L for second class hardwood as in scantling clean sawn as in purlin, rafter and similer work complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, prop, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming Fe-410-W(Gde-E-250) quality-B and painted one shop coat of zinc chromate primer paint (including preparation of surface) at contractors workshop before fabrication complete all as specified & as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 20 to 25mm thick machine cut kota stone slab flooring over 20 mm thick cement screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone slab including cutting, grinding, rubbing and mirror polishing complete all as specified and directed

M&L PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection ( 75 mm thick ) finished even and fair without using extra cement, including making joints 12mm wide to the fool depth of PCC at 3m (max) and every change of direction and filling the same with and inlcuding bitumen and sand 1:3 by weight complete all as specified.

M&L for 100mm thickness PCC 1:2:4, type B1 (using 20mm graded crushed stone aggregate) as in hard standing incl necessary joint filling with bitumen complete all as specified

M&L for 80 mm thick precast PCC interlocking coloured paver rubber moulded block factory made of grade M 40 single layer monolithic high density manufactured by electro vibro hydraulically operated block making maching conforming to IS -15658- 2006 laid and jointed over sand cushion layer complete all as specified and directed. Note : Sand cusion shall be measured & paid separately

Taking down chowkhats or frames with shutters(without taking off shutter from the frams) area exc 1.5 Sqm not exc 4 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters(without taking off shutter from the frams) area not exc 1.5 Sqm each complete all as specified and directed.

M&L Rolled sections as in framing for cladding, door chowkats, cooler stands, glazing and the like fixed with angle cleats and connecting plates, etc (Fe-290 gde E-165). complete all as specified and directed.

S & F Mild steel work in framed work such as grills, gratings etc with ends of bars shouldered and/or roveted, or forged in to spikes; fremed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings, frame work of water tanks, and similar work conforming to Fe-290 Gde-165 complete all as specified and directed.

M&L for mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S & F 30/32mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M & L 35mm thick glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc (without sash bars), edges of framing plain, chamfered of rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) supplied and fitted to chowkhats complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixed in opening as per specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified in clause No. 8B.2 at Sl page No. 143 to 144 and shown in drawing on sl page No 156 of SSR 2010 respectively complete all as specified and directed.

S & F steel windows with side hung shutters including box type hinges with Z section steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed

S & F steel windows with side hung shutters including box type hinges with Z section steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed

S & F steel ventilator with top hung shutters including box type hinges and steel peg stay, complete complete all as specified and directed

M&L for preparation of new or previously untreated steel surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & as directed.

M&L for preparation of new or previously untreated steel surfaces n'exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & as directed.

S&F 3.0 mm thick ordinary quality sheet glass and glazing with oil putty in square not exc 0.5 Sqm in each pane complete as specified and directed.

S&F 3.0 mm thick ordinary quality figured sheet glass pin headed type and glazing with oil putty in square not exc 0.5 Sqm in each pane complete as specified and directed.

M&L 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed

S & F 150 mm long aluminium handles, cast type, anodised complete all as specified and directed.

S & F galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed

M&L for brick work using sub-class `B' fly ash bricks, old size, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4, complete all as specified and directed.

M&L for (350mm x 250mm x 7mm / 450mm x 350mm x 7mm thick ) coloured glazed ceramic tiles in vertical surface set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments over 15mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for non skid coloured tiles, joint free, 7mm to 8 mm thick (square /rectangular) ,(Ist quality/ Premium quality), area of each tiles exceeding 0.11 but n exc 0.18 Sqm in floors, dedo, skerting etc, laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed

Taking down cement or cement lime plaster, any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 , finished the surface even and smooth without using extra cement complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 with water proofing compound @ 2% by wt of cement or as per manufacturer's instructions on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed.Note :- WPC shall be measured & paid separately under respective item.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces of ceiling in cement mortar 1:4 , finished the surface even and smooth without using extra cement complete all as specified and directed

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered or un plastered surfaces of ceiling and applying three coat of white wash on ceiling surfaces complete all as specified and directed.

M&L for applying two coats of cement base paint on wall over a coat of primer including preparation of new plastered or un-plastered surfaces, complete all as specified and directed.

M&L for prepration of new plastered or unplastered surfaces of walls of any description by and applying two coats of oil emulsion distemper white or tinted over a coat of wall putty complete all as specified and directed.

Taking down/up steel water tubing 15 mm dia including fittings fixed on walls, ceilings, laid under floors etc complete all as specified and directed.

Taking down/up steel water tubing 20 mm dia including fittings fixed on walls, ceilings, laid under floors etc complete all as specified and directed.

S&F 15mm bore steel water tubing, medium grade, galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

S&F 20 mm bore steel water tubing, medium grade, galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

Cutting, chases, pinning in. making good to facing on brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good cutting exc 20cm girth complete all as specified & as directed.

S&F 15 mm bore bib taps, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repairs 10 ltrs capacity, dual action, ISI marked PVC flushing cistern low level (white) with inlet ball valve and handle including brackets, rubber bush, washers etc complete all as specified and directed.

S&F in repairs angle valve/ stop valve, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union bore of pipe 15 mm all as specified and directed.

S&F in repairs stop valve long shank (Concealed) (external threaded) cast copper alloy chromium plated screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union, bore of pipe 15mm, all as specified and directed.

S & F in repairs brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed

S&F in repairs PTMT towel rail, 600cm long, with and including CP brass screws and wooden/ plastic cleat (min wt 190 gms) complete all as specified and as directed

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified & directed.

S&F in repairs vitreous China wash basin, white, flat back, size 580x450mm with pedastal excluding taps, waste, chain & plug and porcelain stopper but including brackets, cutting for and pinning ends of brackets complete all as specified and directed.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) but including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screw, pointing arround urinal back in cement mortar complete all as specified & directed.

S&F in repairs 15mm bore brass chromium plated central hole basin mixer for mixing hot & cold water, screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair 32 mm PTMT waste fittings/coupling of WHB ,Sink complete all as specified and directed.

S & F in repair 32 mm waste pipe, 800mm long flexible for WHB ,Sink complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) type 'A' soil, waste and vent pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

Supply & Fix in repairs Vitreous China Squatting pan, "Orissa" pattern, size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including concrete complete including making good to floor complete all as specified and directed .

S&F rotational moulded polyethene water storage tank (cylindrical / vertical with closed top) 500 ltr capacity, ISI marked including PVC lid, 20 mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) hoisted and fixed in position with threaded, nipple of suitable size complete all as specified & as directed.

M & L for Granite (of any type) 20mm thick machine cut, Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

S & F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in Soft/ Loose soil and removing surplus soil to a distance not exceeding 50 M and making good surface, complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-2 (Using 40 mm graded stoneaggregate) in foundations, filling and mass concrete complete all as specified & as directed.

S&F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts etc. including provision of binding wire complete all as specified and directed

Supply only MS Galvanized chain link fencing any size and type complete all as specified and directed

S & F galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc. complete all as specified and directed

S&F 12mm dia mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5 Cm long complete all as specified & directed.

S&F mild steel round bars confirming to Fe 290 Gde E-165 10mm dia as line rows for securing chain link fencing complete all as specified and directed

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

S&F GI frame work for seamless ceilling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45mm seuspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasterner with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connection clips across the intermediate channel at 457 mm centre to centre complete all as specified & as directed.

S & F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long (removing old hangers) complete all as specified.

S & F exposed metal frame ceiling with calcium silicate board 6 mm thick of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 x 600mm grid complete all as specified & directed. (Frame work for ceiling shall be measured and paid separately)

M&L for second class hardwood timber framed and fixed as in scantling ,purlin, rafter and similer work wrought complete all as specified and directed.

M&L for second class hardwood timber for Newel posts, wrought, with square, rounded, chamfered or stop, chamfered edges, mortices for strings and handrails, sectional area exc. 100 mm x 100 mm and fixed complete all as specified and directed.

M&L for second class hardwood timber for Turned caps (or pendants) with ball ornament and fixed to tops or bottoms of newels (upto 100 mm x 100mm in section) with glued and dowelled joint , complete all as specified and directed.

M & L for preparation of new surface of wood over 10 cm width or girth and applying two coats synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Surface execavation n. exc 30 cm deep & averaging 15 cm deep & getting out in soft loose soil including cutting to required gradient and camber as for formation of roads/berms complete all as specified & as directed.

M&L for brick work with sub-class `B' bricks, old size, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6, complete all as specified and directed.

M&L for mooram filling in floors or pavings laid in layers n. exc 15cm thick spread, levelled and rammed including watering etc complete all as specified and directed.

M&L for hard core of gauge n.exc 63mm, deposited, spread and levelled in layers n exc.15cm thick watered and ramed to a true surface complete all as specified & as directed.

M&L 100mm thick Cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub-base/hard standing complete all as specified and directed.

M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) in sub floors, sub-bases etc for receiving the toping layer finish the surface even & rough, complete all as specified and directed.

M&L for glazed ceremic coloured c jointless tiles (1st quality/premium quality) (square/rectangular) area of each tile of size 300 x 200mm, in vertical surfaces such as riser of steps, skirting, dado and pillar, over and including 15mm thick rendering as bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F powder coated (50 micron) aluminium door/window/vetilator frame and side/top hung or sliding shutter complete and fixed with fittings, one or more rebates including jointing cleat, glazing clips, rubber neoprene packing, aluminium snap beading, screws, anodised aluminium fittings etc. complete all as specified. Note: (i) Sheet glass and particle board, hinges, lock, handle, floor spring, hydraulic door closer will be measured and paid separatly (ii) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangemennts etc complete all as specified and directed. (iii) The gap shall be sealed externally with Polysulphide sealant and finished flush with the surface

S&F For floor spring double action hydraulically regulated made up of min 1.25mm thick alluminum alloy sheet foundation box, main body with stainless steelcover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F automatic hydraulic door closer, heavy duty with pivot, aluminium body, ISI marked,,suitable for door shutters of 851 to 1000mm in width and of weight between 61 kg to 80 kg complete all as specified & directed. Make: Sandhu or equivalent as approved by GE.

S&F 5.50 mm thick ordinary quality tinted sheet glass with necessary jointing cleats, glazing clips, rubber packing & anodised aluminium snap beading area exc 0.5 sqm in each plane complete all as specified and directed.

S&F 75 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed.

S&F in repair mortice latch of size 100 mm, 04 levers to existing aluminium door complete all as specified and directed.

S&F 12mm thick prelaminated particle board, fixed with aluminium snap beading in aluminium door complete all as specified & as directed. Note: Aluminium snap beading will be paid seperetly under respective item

S&Fmild steel PVC coated drapery rods, 20mm internal diameter including decorative type brackets and PVC curtainn rings 8 Nos per RM including fixing arrangement with drilling holes in walls, brackets etc quality and colour as approved by Engineer-in-Charge complete all as specified and directed

S & F anodised aluminium snap grid frame work for false ceiling compleete all as specified and directed.

S&F 40 to 50mm thick sand stone slabs in sun shades, chajjas, shelves, cills, landings, cover stones, template, etc n.exc. 2m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4 complete all as specified and directed.

Taking down carefully copper/aluminium point wiring on batten/ PVC conduit (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc, including removal and making good disturbed surfaces of walls, ceilings etc by cement/ colour /plaster to match with the existing location spot complete all as specified & directed.

M&L for point wiring concealed type with 1.50sqmm PVC FRLS insulated, unsheathed, single core, multi stranded copper conductor cable 1100 volts grade including 1.5sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth continuity conductor drawn in and including rigid PVC conduit of suitable size but not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0 mm thick ISI marked plastic laminated sheet cover for fixing switches/ socket/regulators etc including cutting chases in wall as per standard engineering practice & making good the disturbed surfaces to match with existing for the one light/ fan/street/bell point controlled by 1 one way switch 5/6 Amps complete all as specified & directed.

All as per item No-108 here in before but One socket outlet 5/6 Amps on independent board controlled by one switch complete all as specified & directed.

All as per item No-108 here in before but One socket outlet 5/6 Amps controlled by one switch on same board with other switches complete all as specified & directed.

All as per item No-2 here in before but one socket out let 3/5 pin, 5/6 Amps controlled by one 1way switch on independent board but below the switch board of light points in same vertical plane complete all as specified & directed.

All as per item No-108 here in before but using 2.5 sqmm PVC FRLS insulated stranded copper cunductor cable and for one socket out let 3/6 pin, 15/16 Amps controlled by one 1 way switch on independent board complete all as specified & directed. NOTE-For item no 108 to 112 :- (i)The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillers etc for concealing the conduits to required depth & making good the disturbed surfaces in cement mortar 1:4 including finishing the surface to match with the existing surface.The portion of point wiring at RCC Coloumns/Beams/Ceilings etc shall be in surface conduit of suitable size fixed on surface with using PVC rawl plug and provision of covering terminal boxes/junction boxes of any shape and size with 3 mm thick bakelight laminated sheet fixed with suitable GI screws and cup washers. (ii) Fittings like switches,sockets,regulators, lamp holders,light foittings shall be measured and paid for separately under appropriate item of schedule A. (iii)The size of conduits shall be determined on permissible no of runs of wires as specified in SSR part-I clause 19.125 (B).However minimum size of conduit shall be 20 mm dia (medium grade)

Supply and fix switch piano, flush type, single pole, 5/6 Amps one way, 230 volts complete all as specified and directed.Make: Anchor Cat No.38058 or equivalent as approved by GE.

Supply and fix switch piano, flush type, single pole, 15/16 Amps one way, 230 volts complete all as specified and directed.Make: Anchor Cat No.39991 or equivalent as approved by GE.

Supply and fix socket outlet, 5/6 Amps, flush type, 5 pin 230 volts complete all as specified and directed.Make: Anchor Cat No.38320 or equivalent as approved by GE.

Supply and fix socket outlet, multi-purpose 3 pin 5/6 Amps and 3 pin 15/16 Amps complete all as specified and directed.Make: Anchor Cat No.39994 or equivalent as approved by GE.

S&F for ceiling rose surface bakelite 62.5 x 25 mm size 3 terminals complete all as specified and directed.Make -Anchor CAT Part No-39072 or equivalent as approved by GE.

S&F switch, bell push button, single pole, 5/6 Amps, one way, 230 Volts complete all as specified and directed.Make -Anchor CAT Part No-38047 or equivalent as approved by GE.

Supply and fix electrical bell model city ding dong (Ding dong type) AC, 230 Volts complete all as specified & directed. Make:- Anchor / Cona / Plaza as approved by GE.

Supply and fix lamp holder insulated body with back plate for batten fitting complete all as specified and directed.Make: Anchor Cat No. 39797/ 39800 or equivalent as approved by GE.

Supply & fix rotory stepped type electronic fan regulator mini flush type 100 watt 230 Volts complete all as specified & directed.Make: Anchor Cat No.38284/38660 or equivalent as approved by GE.

Supply and fixing LED Bulb 15 watt, single phase, 230 Volts AC supply suitable for lamp holder complete all as specified and directed. Make :- Havells cat part No-LHLDDEEEML8R015 or equivalent Model of Philips/Bajaj/CG/ Wipro as approved by GE.

Supply & fix surface/wall mounting LED batten 20 watt luminaire having extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver with mounting accessories complete with lamp holders fixed to wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No-ENDURALINEARNEOBS20WLED865SPCWH or equivalent Model of Philips/Bajaj/CG as approved by GE.

Supply & fix, surface/ ceiling mounting type 34 watt LED luminaire PLUTO NEO PENAL 2X2 environmental friendly new generation aesthetically ultra modern recess mounting with high brightness SMD LEDs as light source with reflector cover electronic driver, connector block etc with internally prewired fixed to ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No- PLR34WLED857S or equivalent model of make ,Philips/Bajaj/ Crompton Greaves as approved by GE.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havells cat part No- LHECDEFOIH1W028 or equivalent model of make ,Philips/Bajaj/ Crompton Greaves as approved by GE.

Supply & fix, outdoor security light LED 36/40 watt luminaire IP 65/66 protection polyster powder coated with pressure die cast aluminium housing and robust construction with reflector cover pre anodised and flat white high transmission acrylic cover or toughened glass, natural white type with electronic driver, connector block etc with internally prewired fixed to building with and including 1.20M long bracket made out of 40mm dia light grade GI pipe bent to shape & providing clamps 2 Nos made out of 50 x 6 mm Flat iron/MS clamps & 12mm dia bolts, nuts & washers etc and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No- ENDURAPEARLNEOSL40WLED757PASYTOPC,Phillips cat part no BRP052 LED 036 CW HP SLA FG S1 PSU GR or equivalent as approved by GE.

Supply and fixing LED security Flood light made out of pressure die cast aluminium housing with toughned glass, <60 watt ,230 V AC outdoor type 5700K, IP-66 protection and impact resistance IK-07 ,mounted on top of the pole/bldg with fixing bracket having lenght not less than 0.5 meter fixed with suitable fasteners having extended arm length not less than 1.5 meter and dia not more than 43 mm and angle between pole and extended arm should be 100 to 105 degrees including fabrication work for high lighting objects/ shine boards fixing on building, including electrically connecting with PVC insulated three core 0.5 Sqmm strandard copper conductor 3 core flexible cable cord from celling rose to light fittings connecrtor complete all as specified and directed Make :- Wipro cat Part No. LF19-711-060-57-XX or equivalent of Havells/Phillips / Bajaj.

Supply & fix surface mounting type bulkhead 10 watt LED luminaire ENDURA RUGBY NEO IP 65 environmental friendly, altra modern energy saving , decorative oval comprising of high brightness LEDs, connector block etc with internally prewired fixed to wall with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No- Cat part No FT10WLED857SSYMBOPC or equivalent model of make Philips/ Bajaj/ Crompton Greaves as approved by GE.

Taking down care fully sub main wiring / service connections of any size including batten/ conduit, and making good the disturbed surfaces of wall/ floor complete all as specified & directed.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed.Notes:- Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 4.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed.Notes:- Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

Taking down distribution boards any size any type including MCB TPN/SPN/SP etc and making good the disturbed surfaces.

Supply and fix MCB DB vertical type 4 way VTPN sheet metal enclosure 415 volts with 100 Amp fully insulated standard copper bus bar for each face & surrounded with neutral bars and two common neutral bar, two earth bar including cable ties for cable manegement suitable for housing MCCB TPN 415 Volts as incommer, IP-43, IK-09 as per IEC 61439-3 with metal doors all enclosed on standard steel sheet flush mouting type double door factory fabricated complete without MCB & MCCB but with enclosue blank plate complete all as specified and directed . Make:- Legrand CAT No.507725 or equivalent model of make Siemens/ Schneider as approved by GE.

Supply and fix MCB DB sheet metal enclosure factory fabricated double door SPN 8 way with 100 amps rated copper bus bar 240 volts IP-43, IK-09 with metal doorscomplete all as specified and directed. Make:- Legrand Cat Part No. 507611 or equivalent model of make Siemens/ Schneider as approved by GE.

Supply and fix MCB DB sheet metal enclosure factory fabricated double door SPN 4 way with 100 amps rated copper rated bus bar 240 volts IP-43, IK-09 complete all as specified and directed. Make:- Legrand Cat Part No. 507610 or equivalent model of make Siemens/ Schneider as approved by GE.

Supply and fix MCCB 4 pole 100 to 125 Amp Icu 16 Kilo Amp and Ics 100% of Icu with adjustable 70% to 100% and thermal magnetic release suitable for fixing in VTPN DB. Make : Legrand cat part 4200 15 to 4200 16 or equivalent model of make Siemens/ Schneider as approved by GE.

Supply & fix Isolator SPN , 63 Amps, 240 volts, 50Hz, IP-20 as per IEC 60947-3 ISI marked complete all as specified & directed. Make:- Legrand CAT No. 406502 or equivalent model of make ABB/ L&T/ Schneider as approved by GE.

Supply & fix Isolator SPN , 40 Amps, 240 volts, 50Hz, IP-20 as per IEC 60947-3 ISI marked complete all as specified & directed. Make:- Legrand CAT No. 406501 or equivalent model of make ABB/ L&T/ Schneider as approved by GE.

Supply & fix MCB SP, 40 to 63 Amps, 'C' Curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed. Make:- Legrand CAT No. 4085 96 to 4085 98 or equivalent model of make Siemens/ Schneider as approved by GE.

Supply & fix MCB SP, 6 to 32 Amps, 'C' curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed. Make:- Legrand CAT No. 4085 87 to 4085 95 or equivalent model of make Siemens/ Schneider as approved by GE.

Supply and fixing LED light fitting 1x8 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed. Make:- Sudhir

S&F iron metal body heavy duty exhaust fan 300mm sweep, double ball bearing, copper wound, with louvers, 230 volts, 50 Hz, including electrically connecting from ceiling rose to fan connector with 0.5 Sqmm strandard copper conductor 3 core flexible cable cord complete all as specified and directed. Make:- Usha/ Bajaj/ Havells

S&F cast aluminium housing body heavy duty exhaust fan 450mm sweep, double ball bearing, copper wound with louvers, 230 volts, 50 Hz, including electrically connecting from ceiling rose to fan connector with 0.5 Sqmm strandard copper conductor 3 core flexible cable cord complete all as specified and directed. Make:- Usha/ Bajaj/ Havells

Supply and fix ceiling fans, 1200mm sweep, 230 V, BEE 5 star rated, BLDC type complete with three blade, down rod of length 1 mtr to 2.5 mtr length, standard accessories as supplied by OEM, double ball bearing, copper wound with Squirrel cage induction motor, including electrically connecting from ceiling rose to fan connector with 0.5 Sqmm strandard copper conductor 3 core flexible cable cord complete all as specified and directed. Make :- Havells, Bajaj, Khetain, Usha

M & L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm size, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including galvanised steel earth lead wire of 4 mm dia, including 15 mm bore GI light grade protection pipe upto 1 Mtr above the floor level of the buildings where main switch, DB etc, situated, earth lead wire connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt 20 mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1(using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/ Looose soil and deposited the surplus soil to a distance not exceeding 50 mtr away from starting point, all as per electrical plate no:3 of SSR part-1 .

Supply & Laying, testing ,cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 volt grade, with stranded aluminium conductor of size 25 Sqmm 4 core compele all as specified and as directed. Make :- Havells, Grandlay, Polycab, Finolex

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in soft/loose/ soil for taking out/laying CI/GI pipe line and getting out soft/loose soil complete all as specified and as directed by Engineer-in-Charge.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick layers complete all as specified and as directed by Engineer-in-Charge.

Removal of excavated material n.exc 50 mtr away and depositing where directed at a level n.exc 1.5 mtr above from starting point complete all as specified and as directed by Engineer-in-Charge.

Supplying and laying un-rainforced precast concrete cable cover LV type-I flat size 250 mm x 150 mm x 40 mm in trenches for protection of cable.

M&L for sand cushioning dry fine for cable cushioning below and above the cable complete all as directed at site by Engr- in-Charge.

Supply and fixing GI Pipe 40mm Light grade , for cable protection laid in trench under road or path or fixed on pole or wall with clamps with all fittings complete all as specified and as directed at site,. Make :- TATA, Prakash (Surya), Jindal

S & F in repairs MCB, 40-63 Amps, TPN, 415 volts, 10 KA rupturing capacity, 'C' series complete all as specified and directed.

Supply & Laying, testing ,cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 volt grade, with stranded aluminium conductor of size 16 Sqmm 4 core compele all as specified and as directed. Make :- Havells, Grandlay, Polycab, Finolex

Supply and fix MCB DB sheet metal enclosure factory fabricated double door TPN 4 way with 100 amps rated copper bus bar 240 volts IP-43, IK-09 with metal doorscomplete all as specified and directed. Make:- Legrand Cat Part No. 507670 or equivalent model of make Siemens/ Schneider as approved by GE.

scjha&sons

deva engineers

M/s D AND R CONSTRUCTION AND SUPPIERS

M/S A GUPTA AND ASSOCIATES

Sethi Brothers

Asha Construction

CREATIVE CONSTRUCTION

SahaDevSingh Constructions