Supply Installation and Maintenance of SCADA System For Parbati Dam Dholpur

Local Control System for Chapi Dam

Supply of PLC/RTU system with software development of PLC/RTU, Control Panel with front door opening cabinet, fitted with Power buses, MCBs & modem. Suitable power supply to power up PLC/RTU panel, 7” or above HMI display & Industrial type electrical fitting & cabling with suitable conduits complete for all related field instruments, as per technical specification.

Supply of Shaft Encoder based rotary position sensor with local digital Display & proximity limit switches type Gate Position Sensors for indication and monitoring of Spillway gates, Intake Gates, Silt flushing gates including cabling & integration with PLC/RTU as per technical specifications.

Supply of 3 Phase VFD Starter panel for each motor of dam & head regulator gates which shall consists of VFD, S.P.P, MCB, OLR, Timer, Main Switches including cabling & Electronic Digital Indicator complete as per technical specifications.

Supply of Bullet Camera (Fixed Type)- IP DIGITAL Night Vision (I.R.) Outdoor Weather Resistant, 2 Mega Pixel, 72 LED Color Camera. 6 OR 8 or 12 MM (According to site suitability) 2 MP Auto Iris Lens in Elegant Metal Die Cast Housing. Outdoor weather resistant IP 66, for monitoring the gates operation complete as per technical specifications.

Supply of Pan Tilt Zoom (PTZ) 36 X Optical and 12 X Digital Zoom; 2 Mega Pixel IP based (DIGITAL) Camera, 500 meters. Night Vision (Multiple Intelligent Array system) in IP66 Weather Resistant Outdoor Metallic Housing. Outdoor weather resistant IP 66 including cabling required for monitoring. As per technical specifications.

Supply of Water Level transmitter non-contact Ultrasonic type having 10 m range for measuring downstream discharge of head regulators. Including all necessary cabling with suitable conduits & electrical fittings & mast complete as per technical specifications

Supply of Water Level transmitter non-contact RADAR type having 35m range for inflow & outflow measurement level cum discharge at remote monitoring stations, including all necessary cabling with suitable conduits & electrical fittings & mast complete as per technical specifications.

Supply of Datalogger/RTU with 2 channel input type with GPRS/GSM based telemetry including antenna, Enclosure and all necessary equipment for data transmission for remote monitoring stations, as per technical specifications.

Supply of solar panel, charger regulator, batteries, lightening arrestor with all connectors, cables and conduit for cables for providing un interrupted power supply to instrumentation system, as per technical specifications.

Supply of Main PLC Controller system with firm ware based hot redundancy which shall include software development of PLC, Control Panel with front door opening cabinet, fitted with Power buses, MCBs & modem. All the Electrical fittings will be Industrial type. Including suitable switch mode power supply (SMPS), 12” display & interconnection with related remote PLC/RTU’s, complete as per technical specification.

Supply, engineering and development of customized SCADA software for complete System for Parvati Dam & Head regulator automation with life time licensed version as per technical specifications.

Supply of Master server which includes Server with server Rack and industrial grade monitor with USB, RS232/RS485, Ethernet Ports, OS Windows 8 or higher compatible to SCADA System complete as per technical specifications.

NETWORK VIDEO RECORDER (NVR) 32 Channel 1080P Full HD, Real time Recording and Reviewing in Compression Format with dedicated sufficient Hard Drive to have memory of at least 30 days as per technical Specifications.

Supply of IT Hardware which includes required Static IP, Router, Switch, firewall system and A3 color printer as per technical specifications.

Supply of 86” or above LED Display/ Video wall System for monitoring of SCADA & Surveillance system at Dam Control Room as per technical specifications

Supply of laptops & 4G/3G internet dongle along with licensed version of Client SCADA software for remote viewing & monitoring of system as per technical specifications.

Supply of diesel generator set 10.0 kva with 04 earth pits for earthing along with accessories complete as per technical specification

Supply of online 3 KVA UPS with Battery system for power backup of Parbati dam control room equipment’s including all necessary cabling & electrical fittings complete as per the technical specifications

Installation, testing & Commissioning of PLC/RTU system with software development of PLC/RTU, Control Panel with front door opening cabinet, fitted with Power buses, MCBs & modem. Suitable power supply to power up PLC/RTU panel, 7 inches or above HMI display & Industrial type electrical fitting & cabling with suitable conduits complete for all related field instruments, as per technical specification.

Installation, testing & commissioning of Shaft Encoder based rotary position sensor with local Digital Display & proximity limit switches Type Gate Position Sensors for indication and monitoring of Spillway gates, Intake Gates, Silt flushing gates including cabling & integration with PLC/RTU as per technical specifications.

Installation, testing & commissioning of 3 Phase VFD Starter panel for each motor of Dam gates & head regulator gates which consists of VFD, S.P.P, MCB, OLR, Timer, Main Switches including cabling & Electronic Digital Indicator complete as per technical specifications.

Installation, testing & Commissioning & integration with NVR located at Control Room, of Bullet Camera (Fixed Type)- IP DIGITAL Night Vision (I.R.) Outdoor Weather Resistant, 2 Mega Pixel,72 LED Color Camera. 6 OR 8 or 12 MM (According to site suitability) 2 MP Auto Iris Lens in Elegant Metal Die Cast Housing. Outdoor weather resistant IP 66 for monitoring the gates operation, complete in all respects as per technical specifications.

Installation, Testing & Commissioning & integration with NVR Located at Control Room of Pan Tilt Zoom (PTZ) Cameras, 36 X Optical and 12 X Digital Zoom; 2 Mega Pixel IP (DIGITAL) Camera, 500 meters. Night Vision (Multiple Intelligent Array system) in IP66 Weather Resistant Outdoor Metallic Housing. Outdoor weather resistant IP 66 including cabling & conducting required for monitoring. As per technical specifications.

Installation, Testing & Commissioning of Automated Water Level transmitter non-contact RADAR/Ultrasonic type having 10 m range for downstream water level/discharge measurement at LBC head regulators. Including all necessary cabling with suitable conduits & electrical fittings & mast and integration with PLC/RTU complete as per technical specifications.

Installation, testing & Commissioning of Water Level transmitter non-contact RADAR type having 35m range for measurement level/ discharge at remote monitoring stations, including all necessary cabling with suitable conduits & electrical fittings & mast and integration with Datalogger/RTU system complete as per technical specifications.

Installation testing and commissioning of Data logger/RTU with 2 channel input type with GPRS/GSM based telemetry including antenna and all necessary equipment for data transmission for remote monitoring stations, as per technical specifications.

Installation testing and commissioning of solar panel, charger regulator, batteries, lightening arrestor with all connectors, cables and conduit for cables for providing un-interrupted power supply to instrumentation system.As per technical specifications.

Installation, Testing & Commissioning of Main PLC Controller system with firm ware based hot redundancy which shall include software development of PLC, Control Panel with front door opening cabinet, fitted with Power buses, MCBs & modem. Inc+B7luding suitable switch mode power supply (SMPS), 12” display & cabling with Industrial grade type electrical fittings for related remote PLC/RTU’s, as per technical specification.

Engineering, testing & Commissioning of customized SCADA software for complete Dam and head regulator with life time licensed version as per technical specifications

Installation, Testing & Commissioning of Master server with SCADA Software which includes Server with server Rack and industrial grade PC with USB, RS232/RS485, Ethernet Ports, OS Windows 8 or higher compatible to SCADA System complete as per technical specifications

Installation, testing & commissioning of NETWORK VIDEO RECORDER (NVR) 32 Channel 1080 P Full HD, Real time Recording and Reviewing in Compression Format with dedicated Hard Drive to have memory of at least 30 days as per technical Specifications.

Installation, Testing & Commissioning of IT Hardware which includes required Static IP, Router with modem, Switch, firewall system and A3 Color printer as per technical specifications

Installation, Testing & Commissioning 86” or above LED Display/ Video wall System for monitoring of SCADA & surveillance system at Dam Control Room as per technical specifications

Charges for high speed synchronous internet connection (min. 8 mbps upload and download speed) & Static IP for Five years.

Charges for High speed 4G/3G internet dongle for laptop with Client SCADA software for remote viewing & monitoring of Complete SCADA system for Five years.

Installation, Testing & Commissioning of Online 3 KVA UPS with Battery system for power back up of Gudha Dam control room equipment’s as per the technical specifications

Installation, Testing and Commissioning of Diesel Generator Set 10.0 KVA with 04 Earth Pits for earthing, Starter Panel, Energy meter & cabling Complete in all respects as per technical specifications.

Five Years Operation & Maintenance and Comprehensive Warranty for Parvati Dam & Head Regulator SCADA based automation system as per Price schedule after final acceptance of SCADA & Surveillance system. This includes replacement of material & consumable as & when required at bidders’ cost. The cost of Communication for GPRS & SIM charges for data transmission, maintenance and other related charges. Minimum one Service Engineer shall be placed at Dam Control Room for Operation of SCADA & Surveillance system.

Training of the purchaser's personnel at the supplier’s plant and/or/onsite in assembly, start up, operation, maintenance and/or repair of the supplied goods. Course topics will include sensor calibration, PLC/RTU & SCADA configuration, data downloading, data retrieval, collection, Trouble shooting, processing maintenance requirements and procedure for equipment configuration, installation, site testing and commissioning including training kit containing course material in soft and hard copies.

Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m in dry or moist including dressing of excavated area, dewatering wherever required complete in all respect Hard / dense soil

Refilling the excavated earth (excluding rock) in trenches, plinth side of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering including cost of water, loading and un-loading wherever required with cost of dewatering wherever required.

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3coarse sand) and making good the joints excluding the cost of centering,shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 40mm.

Random rubble stone masonry (using R. R. stones where 75 % stones to be not less than 15 cm in size in any direction and weighing not less than 23 kg.) for foundation including curing with all leads of all construction materials including curing etc. complete. © In cement sand mortar 1:5

Providing and Laying in position of Cement concrete Nominal mix (1:1.5:3) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto

Brick masonry (using well burnt clay bricks of size 230 x 110 x 70 mm, class designation 75 as per specification) in superstructure including all leads of all construction materials including curing etc. complete in cement mortar 1:4.

centering and shuttering for slabs, beams, lintels columns, trough with or without caps and base including propping and remove

Supplying of M.S. reinforcement including labour charges for bending binding and placing in position all reinforcement as per drawing including cost of binding wire and all leads and lifts using Tor or ribbed bars (Is 1786-1985).

Plaster in cement sand mortar 1:4 including racking of joints, smooth finishing & curing etc. complete including all leads of all construction materials , of thickness: 20mm

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:2:4 (1-Cement:2-coarse sand:4-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

Providing & fixing steel glazed doors, windows and ventilators with shutters of standred rolled steel section joint mitred and welded with steel 13x3mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:2:4 (1-Cement:2-coarse sand:4-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of plain glass panes 4mm thick with copper glazing clips and special metal-sash putty of approved make, or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fittings except necessary hinges of pivots steel handles and peg stay etc. as required. Doors

Providing & fixing steel glazed doors, windows and ventilators with shutters of standred rolled steel section joint mitred and welded with steel 13x3mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:2:4 (1-Cement:2-coarse sand:4-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of plain glass panes 4mm thick with copper glazing clips and special metal-sash putty of approved make, or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fittings except necessary hinges of pivots steel handles and peg stay etc. as required. windows side hung(openable)

Providing and fixing 1 mm thick M.S. Sheet slidings shutters with frame & diagonasis braces of 40 x 40 x6 mm angle iron 3mm M.S. gusset plate at the junction & corner , 25mm dia pulley 40x40x6 mm angle and T iron guide at the top and bottom respectively including applying a priming coat of approved steel primer

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding : New work (two or more coats) over and including scrapping and priming coat with cement primer

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work.

Providing and laying cement concrete coping in (1:2:4) with maxium size of crusher broken aggregate upto 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of 75 mm.

P & F unplasticized poly choride (UPVC) SWR pipe fitting type B for sciland waste discharge system ( IS : 13592: 1992 marked) of approved quality / make 110mm dia

P&F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS : 2556 mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor : size 530x410 mm

P & F WVC wash basin (Ist quality, I.S. : 2556 mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. pillar cock (IS : 8934 mark) & 32 mm C.P. brass waste coupling of approved make. 25 mm G.I. waste pipe complete including cutting & making good the wall : Size 450 mm x 300 mm

Providing, laying and fixing in position RCC spun or hume pipe with collars (ISI 458-2003) in required size packed in gasket for hume or spun yarn & neatly finished with rich grout of cement mortar 1:3 perfectly air tight including testing of joints. 100mm NP-3

P & F G.I pipes (internal work) with G.I. fittings (IS:1239 mark) & MS clamps including cutting and making good the walls and floors : Exposed on wall 'B' (i) 15 mm dia nominal bore

P & F PVC storage tank (IS : 12701 marked indicating the BIS license No), of approved make with cover, 25 mm dia 1M long G.I. over flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design : 750 litre capacity.

P & F bib cock (IS : 8931 mark), superior quality of approved make : Brass 400 grm, 15 mm nominal bore

P & F stop cock (IS : 8931 mark), superior quality & of approved make : brass 400 gm. 15 mm nominal bore.

P & F looking mirrors with P.V.C. frame of approved (Atul, Modi Guard , Saint Gobin or equivalent) size 500 x 400 mm

P & F flush cock/flush valve (IS 9758 mark) for WC of approved quality make : CP brass half-turn exposed 25 mm nominal bore.

Construction of soakage well in all types of soil of approved drawing, top 90 cm. Portion in 450 mm thick masonry with cm 1:6, 80 mm thick stone slab covering, jointing of slab in cm 1:3, Ralthal, Kharanja 40 mm thick M-15 grade C.C. flooring, earth work etc. complete including disposal of surplus earth with in a lead of 50 mtr. inner dia 90 cm & 10 to 12 mtr deep.

Wiring of light point/fan/exhaust fan point/cell bell with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conduct 1.1 KV grade and 1.50 sq mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 KV grade (IS 694) of approved make in surface/recessed ISI marked (MMS (IS:9537 P-III) PVC conduit & its accessories round tiles 18 SWG MS box with earth terminal 6A switch, 3mm thick phenolic laminated sheet zinc plated/brass screws cup washers making connections testing etc as required. i- shortpoint (upto 3 Mtr)

Wiring of light point/fan/exhaust fan point/cell bell with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conduct 1.1 KV grade and 1.50 sq mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 KV grade (IS 694) of approved make in surface/recessed ISI marked (MMS (IS:9537 P-III) PVC conduit & its accessories round tiles 18 SWG MS box with earth terminal 6A switch, 3mm thick phenolic laminated sheet zinc plated/brass screws cup washers making connections testing etc as required. ii- medium point ( Upto 6 Mtr)

Wiring of light point/fan/exhaust fan point/cell bell with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conduct 1.1 KV grade and 1.50 sq mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 KV grade (IS 694) of approved make in surface/recessed ISI marked (MMS (IS:9537 P-III) PVC conduit & its accessories round tiles 18 SWG MS box with earth terminal 6A switch, 3mm thick phenolic laminated sheet zinc plated/brass screws cup washers making connections testing etc as required. iii- long point (Upto 10 mtr)

Wiring of 3 pin 5 amp light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conduct 1.1 KV grade and 1.5 sq mm nominal size FR PVC insulated unsheated flexible copper earth conductor 1.1 KV grade (IS: 694 ) of approved make in surface/recessed ISI marked MMS (IS:9537 P III) PVC conduit & its accessories, 18 SWG 175mm x 100 mm x 60 mm M S Box with earth terminal, 6A socket, 3mm thick ISI marked phenolic laminated sheet, zinc plated/ brass screws cup washers making connections testing etc as required. On Board

P & F 240/415 V AC MCB with positive isolation of breaking capaciy not less then 10 KA ( B/C tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage as per PWD specification for electrical works with ISI marked IS 8828/1996 conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanism, energy limiting of class 3 as per IEC, minimum face termination capacity of 35 sqmm conductorline load reversibility level holding facility IP 20 contact production and fitted with existing distribution board/sheets mini operation 20000 up to 32 A rating and 10000 up to 63 A , 5000 for 80 A rating including making connections testing etc. as required, OEM shall have submit NABL/CPRI/ERDA accrediated lab test reports before execution and all as per pre approved by Engineer in charge. for additional technical parameters of products/work refer Annexure A attached with this BSR. 50A to 63A rating Group I

P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Providing & Fixing of IP 20 box made out from 1.2mm thick CRCA sheet steel with depth of minimun 30 mm and finished with powder coating and suitable for mounting LED tube including side covers, holders , internal wiring to illuminate the single sided connection LED tube. ( Without tube). All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . Suitable for 4' LED Tube shape fixture 1 X 18/20 W

Providing & Fixing of IK07 IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum LM6/ ADC12 material with heat dissipation fins on housing with UV stabilized PC/Toughened Glass cover (UV stablzation report submitted for UV cover ) and secondary lens on each LED & should be SMD type . The System level Luminaire efficacy >=120 lm/ wt with High Power LEDs is to be used and potted driver must be potted & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety ,Input Frequency 50Hz±3% Power Factor >0.95 driver Efficiency >85% ,THD(I) 70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced. OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . LED Street Light fixture 30 Watt

P & F paper phenolic resin bounded laminated confirming to IS : 2036-1995 for boxes/ frames including making holes for switches etc with brass screws, washers/ zinc plated nut and bolts as requirred. 4.8 mm thick Group I

Providing & Fixing of non modular socket size flush type 180 watt rotary minimum 5 step fan regulator as per PWD specification for electrical Works, ISI marked (IS:11037) made out from industrial grade Polycarbonate or fire resistant ABS material including making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.99% purity copper, class 5 stranding in acc. to IEC 60228 for lower watt loss , oxygen free (<10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation PVC type A ,flame retardant as per IS 10810-53, better amperage rating as per VDE 0298 part 4, , in existing surface or recessed PVC/ MS conduit/casing capping including all as per pre approved by Engineer in charge,making connections, etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 2 x 2.5 sq. mm. + 1x1.5sqmm

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.99% purity copper, class 5 stranding in acc. to IEC 60228 for lower watt loss , oxygen free (<10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation PVC type A ,flame retardant as per IS 10810-53, better amperage rating as per VDE 0298 part 4, , in existing surface or recessed PVC/ MS conduit/casing capping including all as per pre approved by Engineer in charge,making connections, etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm.

Providing & Fixing of IK09 recessed/surface mounting heavy duty horizontal type sheet steel of 1.6 mm thick Distribution board as per PWD specification for electrical Works ISI marked conforming to IS-13032 & IS-8623 / conforming to IEC 61439-3. Phosphatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link , connecting wire of suitable rating and din bar,masking sheet, including making internal DB terminations with copper lugs and with detachable gland plate, including making connections, testing etc. as required.OEM shall have submit NABL / CPRI / ERDA accrediated lab test reports before execution & All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 8 Way (8 O/G +2 I/C )

Providing & Fixing of of Double ball bearing, copper wounded capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible 3 core copper conductor ,making connections, testing etc. as required. OEM shall be an ISO certified company. Appropriate OEM test certificate shall be submitted by contractor. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 225 mm sweep

Supply Installation testing & Commissioning of ISO certified manufacturer made Monoblock motor pump set ISI marked (IS:9079- 2002) with TEFC motor, motor should be IE2 class as per IEC 60034-2- 1: 2007, IEC 60034-30: 2008, & IS12615:2011. with Stainless steel Impellor, Stainless steel shaft, Mechanical seal, Single/Three phase ( 240 - 440 V ) permanent split capacitor type (PSC), fitted with thermal overload protection, . Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively complete in all respect. Appropriate type test certificate / OEM test report shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 0.5 HP, 1-Ø, (3 - 18)Mtr, (100-26) LPM

polished blue kota stone flooring skirting, laid over 20mm thick base of c.m. 1:4 and jointed with gray cement slurry to match the shade of the slab including rubbing and polishing complete for area of each slab 2001 to 5000 sqcm

Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm comfirming to IS : 13753 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4) Category-A : Kajaria, Jhonson, Somani make

Table type 3 (storage provided one side,length of table top-1200 mm, depth of table top-600 mm)

Chair type 4 {chair type with arms,frame type 4 legs,castors without (inclusive of all taxes)}

Supply , Installation, Testing and Comissioning of ISO certified company made Air Cooled Hi Wall split type Air conditioners with latest star rating system as per BEE amended upto date complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU), R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. Min 5 year OEM warranty both compressor and PCB. NABL accredeated as per IS/ISO/IEC 17025 standards / CPRI/ ERDA lab testing reports as per IS 1391(Part-2) 2018 with OEM certificate must submitted to engineer in charge. All as per pre approved by Engineer in charge. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . Invertor type 1.5 TR with 3 star rating of BEE (ISEER not less then 3.7 )

Providing sofa set(Frame covering fully upholstered, Total No of seats in sofa set -4, covering material for seat and back rest-leatherite)

Table type 5 (seating capacity - 8 seater, width in mm -1200, Length in mm - 2400mm, shape of table top Rectangular , height in mm - 750 mm ) (inclusive all taxes)

Chair type 7 {Revolving chair medium back, support backrest symmetrical lumber support, back cover mesh fabric) (inclusive all taxes)

Providing & Fixing of ISO Certified company made BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan as per PWD specification for electrical Works, conforming to IS:374-2019, & IS:1885 -P-V1981. with down rod up to 30 cm with secondary support safety cable ( steel wire ) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. Appropriate OEM test certificate shall be submitted by contractor. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 1200 mm Sweep BEE 2 Star rated (service value >=4.5 to < 5 )

Almirah (Thickness of sides in mm - 30mm, Height in mm -1350 mm , width in mm - 760) (inclusive all taxes)

SITCofIP40quickmakeandquickbreak4polecurrentlimitingMouldedcasecircuitbreaker(MCCB)madeofflameretardent&heatresistantmaterialhavingfollowingcurrentrating,shortcircuitbreakingcapacityat440/415V,50Hz;O/L&S/CsettingsasperPWDspecificationforelectricalWorks,conformingtoIS/IEC60947P-2:2003withfrontfaceandcentralisedadjustable,tripfreemechanisum,truecontactpositionindicator,lineloadinterchangeability,designedforbothhorizontal&verticalmountingwithoutanyadverseeffectonelectricalperformance,suitableforoperationupto55degreeandwithoutderatingupto40degree,pollutiondegree3,havingpositiveisolationcapability,push(test)totrip,triptimelessthen10msunders/ccondition,BreakingcapacityIcs=100%Icu.Uimp=8KV,ratedinsulationvoltage800V,provisionforUVR,shunttrip,earthfaulttrip,doorinterlock,padlock&rotaryhandle,includingmakingconnectionswithlugs&spreaders,etc.asrequired.OEMshallhavesubmitNABL/CPRI/ERDAaccrediatedlabtypetestcertificatebeforeexecution.AllasperpreapprovedbyEngineerincharge.Foradditionaltechnicalparametersofproducts/work,refer Annexure "A" attached with this BSR . With Thermal Magnetic release upto100Amp,25kA,adjustableO/L&fixedS/Csetting,Ics = 100 % Icu

PlateEarthingasperPWDspecificationforelectricalWorksasperIS:3043withHotdippedG.I.Earthplateofsize600mmx600mmx6.0mmbyembodying3to4mtr.belowthegroundlevelwith20mmdia.G.I.'B'classwateringPipe,includingallaccessorieslikenut,bolts,reducer,nipple,wiremeshedfunnel,andHeavydutyweatherproofpoly-propyleneearthpitchamberwithlockableJamfreelidsuitableforsafeworkingload5000KgormoreofsizeTopDia.225to260mm,BottomDia300to350mm.andHeight250to300mm.andembodyingthepipecompletewithalternatelayerssaltandcoke/charcoal,testingofearthresistanceforvalueof5ohmsorlessasrequired&mustrecordbyengineerinchargeduringsitevisitandensuretoenterinmeasurmentbook.AllasperpreapprovedbyEngineerincharge.Foradditionaltechnicalparametersofproducts/work,referAnnexure "A" attached with this BSR .

Providing&FixingofIndustrialplugandsocketasperPWDspecificationforelectricalWorksconformingtoIEC60309-1/2madeoutofselfextinguishingengineeringpolymer/polyamide,nickelplatedbrasssleeveandpins,socketwithshutterincludingmakingconnectionetcasreqdcompleteinallrespect.OEMshallhavesubmitNABL/CPRI/ERDAaccrediatedlabtestreportsbeforeexecution&AllasperpreapprovedbyEngineerincharge.Foradditionaltechnicalparametersofproducts/work,referAnnexure"A" attached with this BSR . Plug top 16 A 3 pin(2P+E)

iCAM SYSTEMS LLP

Indexel Engineering Pvt. Ltd.

bips systems ltd