Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance 7 JASWANT NIWAS NAGBANI MACHHLIAN NAGBANI NAGABANI JAMMU JAMMU KASHMIR 181206 | JAMMU | JAMMU AND KASHMIR | 181206 | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹39,000
Closing Date
18 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER JAL SHAKTI (M) GWD DIVISION JAM
EXECUTIVE ENGINEER JAL SHAKTI (M) GWD DIVISION JAM
AS PER BOQ
2023_PHE_229400_1
e-NIT No. GWD/116 of 2023-24
Open Tender
Drilling Works
Item Rate
30 days
AS PER BOQ
AS PER SBD
9 documents required · 9 mandatory
₹1,000
EXECUTIVE ENGINEER JAL SHAKTI (M) GWD DIVISION JAM
₹39,000
Yes
OFFICE OF THE EXECUTIVE ENGINEER JAL SHAKTI (M) GW
26 Sept 2023
11 Sept 2023
20 Sept 2023
11 Sept 2023
18 Sept 2023
13 Sept 2023
12 Sept 2023
Amount
Deep Drilling, Development & Stabilization of 200 mm dia Tube well Providing/ Installation of Submersible pump set along with allied accessories and fabrication and erection of colour coated corrugated iron sheet shed (on EPC Mode) By ODEX Method at Central Breeding Farm, Hakkal in Gandhi Nagar Constituency of District Jammu
Setting up of drilling site by way of shifting of requisite machinery and other allied material after making proper approaches as per the requirement at site.
Boring/ drilling of 200 mm dia. bore well 90 M BGL or till sufficient aquifer Zone/discharge is encountered by using ODEX Method of drilling and simultaneously driving of 200 mm dia. ERW Casing Pipe after providing and fixing of MS Casing Drive Shoe and providing/fixing of casing drive shoe with Ist. 200 mm dia. ERW M.S. Casing Pipe. Complete as per IS:2800 (Part-I)including collecting of samples from different strata, preparing and submitting strata chart/bore log including hire and running charges of all equipment, tools, plants and machinery required for the job. (ERW MS Casing Pipe shall be paid separately).
Supplying, assembly (including welding)n, lowering and fixing in vertical position in the bore well. ERW (Electric Resistance Welded) FE 410 Mild Steel Bevelled ended 200 mm dia. Casing Pipes conforming to IS: 4270 of reputed and approved make including painted with outside surface with two coats of anti-corrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths. The cost includes transportation, loading, unloading and stacking/handling at site. Complete Job.
Development and Stablization of Bore Well in accordance with IS:2800 (Part-I) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor and submersible pumpset for required time till the Tube Well is fully developed and clear potable water is obtained. Complete including required hire and labour charges of air compressor, tools and accessories etc.
Providing and installation Testing & Commissioning of three phase submersible pump set of 8000-10000 GPH at head of 60-80 mtrs. , P/f of Flanged G.I. Column Pipes 80mm dia (medium Class) 60-80 mtrs., P/f of 190 mtrs. submersible cable 6mm2, P/f of 50 mtrs. Aluminium armoured LT cable 60mm2. Providing, Installation and commissioning of three phase automatic voltage stabilizer of suitable capacity (tentatively 25-30 KVA) with high and low volt cut, in copper winding. The complete job includes cost of material, labour and transportation charges. Providing, Installation and commissioning of LT control panel of requisite capacity (max. upto 50 amps) along with allied accessories including MCCB.
Fabrication and erection in position of 3.34 x 3.04 x 3.04 mtrs size colour coated corrugated iron sheet shed for borewell at CENTRAL BREEDING FARM, HAKKAL. The job includes Earth work for Excavation of foundation of width 250 mm and depth 500 mm having an elevation of approximately 250 mm above ground level suitable for specified floor size of the shed structure and embedding of vertical prop foot. Providing/laying in-situ of mud mat 75 mm thick along the foundation bed in PCC mix of 1:4:8. Fabrication of vertical props out of ISMC 75 section 8 Nos. of length 3500 mm. Welding in position of base bearing plate and top bearing plate of size 200 mm x 200 mm made out of 6 mm thick M.S plate at bottom end and top end of vertical prop respectively and stiffened in position with help of 75 mm x 200mm cut to shape stiffeners made out of 6 mm thick M.S Plate. Erection in position of vertical props well in sole and alignment with respect to each other resting with its base plate on mud mat of foundation bed, followed by cost in-situ of foundation block in PCC mix of 1:2:4 with elevation of 175 mm from ground level with respect to surroundings. Three no’s of single span Trusses (one side slope 500mm to 00mm) are to be fabrication and erected in position for span of 2.4 mtrs, with its rafts, struts, web and tie member are to be fabricated out of ISA 40 x 40 x 5 mm thick section with gusset plates and connecting plates fabricated out of 6 mm thick M.S plate cut to shape and size as per requirement. Fabrication and erection in position of side runners 2no’s on three sides and purlins 3 no’s made out of ISA 35 x 35 x 5 mm section resting on clits made out of 40 x 40 x 5 mm angle iron section 100 mm long. Covering of three sides and roof by providing/fitting in position of colour coated corrugated iron sheet of 22 gauge with help of J/L hook with limpet washers of suitable size at appropriate spacing end overlapping of sheet ends/sides to hold the sheets well in position. The wind tie shall be provided as per requirement. The door and window grooves one No. each are fabricated out of ISA 35 x 35 x 5 mm thick of size 4’ x 8’ and 4’ x 3’ respectively. Fabrication and fitting in position door shutter and window pans with their frame made out of ISA 30 x 30 x 3 mm thick with proper skin covering out of plain iron sheets with help of screws/nut-bolts/ welding fitting in position with proper hinges, door/window handles, latches and lock/key arrangement for the door. Earth filling in between the foundation structure for floor followed by laying of mud mat 100 mm thick in mix of 1:4:8 and laying in position of 50 mm thick floor in PCC mix of 1:2:4. With an approximate area of 8.15 m2.The job includes cutting to size of structural steel sections followed by straightening, truing, assembling by welding for each member. All steel sections are to be painted with two coats of red oxide followed by two coats of synthetic enamel after proper surface preparation. The Job includes cost of material, labour, consumables, loading, unloading, to & fro, transportation and hire charges of tools and tackles complete job.
Ultra Tech Drillers
R D Singh and Co
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .