PD/EANWMM/Stone

Amount

Material and Labour stone kerb in repair of roughly squared Sand Stone as per existing of size 60 cm long x 45 cm height x 10 cm width, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6 mm for top and exposed surfaces of sides and 20 mm for the rest of the surfaces, jointed in cement mortar 1:4 and pointed in cement mortar (1:3) complete including dismantling all as specified and as directed by Engineer-in-Charge.

Material and Labour taking out and refixing of stone kerb after cleaning of cement and jointed in cement mortar 1:4 & pointed in cement mortar (1:3) complete including dismantling all as specified and as directed by Engineer-in-Charge.

Dismantling stone slab, tile of any description/thickness in any position laid wet/dry as in floor / wall/coping bedded and pointed in cement mortar complete all as specified and as directed by Engineer-in-Charge.

Material and Labour in repair 40 mm thick rough sand stone as per existing colour of dry cladding of any size machine cut edges, fixed on wall including cost of drilling hole in concrete and sand stone complete all as specified and as directed by Engineer-in-Charge. Note:- (i) The work shall be executed upto height of 6 mtr.

Taking out and refixing of 25 mm to 40 mm sand stone and 20 mm /30 mm granite stone and 40 mm sand stone in dry or wet as in wall / coping/ floor / facia / skirting etc including all cutting (as per existing shape ,size and design ) , wastage and drilling hole in stone as per site requirement, in same/other position, fixed with new SS-304 grade clamp,10 mm dia SS fastner and SS pin,01 No in each tile complete all as specified and as directed by Engineer-in-Charge.

Taking out of 20 mm polished granite stone of bollard and refixing with araldite, area not excedding 0.1 Sqm each granite complete all as specified and as directed by Engineer-in-charge.

Material and Labour dressed sand stone slab flooring 40 mm thick, bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 including all cuttings and wastes, complete all as specified and as directed by Engineer-in-Charge. Note : - Screed bed shall be measured and paid for separately

Removing cement mortar from dismantled sand stone tile / granite stone tile of any size ( 20mm and 40 mm thick ) including cutting as per site requirement ,cleaning and making it so clean as for re-use in work and finally refixing in same posn/other posn and pointing with laticrete steller grout with pigment to match the wrks. Note : - Screed bed shall be measured and paid for separately

Material and Labour granite tile flooring using 20 mm thick flamed granite tiles (of any type), machine cut (Straight/radial), bedded and jointed in cement mortar (1:3) with grey cement and pointed with to laticrete steller grout to match the shade of granite stone complete and also including all cutting and waste; size of slab / tile and pattern of laying as per existing complete all as specified and as directed by Engineer-in-Charge.Note : - Screed bed shall be measured and paid for separately

All as per above item No 09 but 40 mm thick

Material and Labour for 40 mm thick flamed granite tiles Lakha red (of any size, shape ,type) machine cut ( radial cutting ) as in floor machine cut, bedded and jointed in cement mortar (1:3) with grey cement and pointed with laticrete steller grout to match the shade of granite stone complete and also including all cutting and waste; size of slab / tile and pattern of laying as per existing complete all as specified and as directed by Engineer-in-Charge.Note : - Screed bed shall be measured and paid for separately

Material and Labour for 40 mm thick flamed granite tiles Lakha red (of any size, shape ,type) machine cut ( radial/straight cutting ) as in steps, risers, jambs, pillars ,ramp machine cut, bedded and jointed with grey cement and pointed with laticrete steller grout to match the shade of granite stone complete and also including all cutting and waste; size of slab / tile and pattern of laying as per existing complete all as specified and as directed by Engineer-in-Charge.Note : - Screed bed shall be measured and paid for separately

Material and Labour for 20 mm thick flamed granite tiles (of any type) machine cut ( radial/straight cutting ) as in steps, risers, jambs, pillars ,ramp machine cut, bedded and jointed in cement mortar (1:3) with grey cement and pointed with laticrete steller grout to to match the shade of granite stone complete and also including all cutting and waste; size of slab / tile and pattern of laying as per existing complete all as specified and as directed by Engineer-in-Charge.Note : - Screed bed shall be measured and paid for separately

Material and Labour 40 mm thick sandstone slabs, dressed close picked on exposed faces, set and jointed in cement and stone dust mortar 1:3 and pointed in cement mortar (1:2) with pigment to match the shade of work mixed with approved pigment to match as in veneering to walls, pillars, steps etc. complete all as specified and as directed by Engineer-in-Charge.Note : - Screed bed shall be measured and paid for separately

Material and Labour granite tile flooring using (lakha red ) 20 mm thick flamed granite tiles (of any type), machine cut bedded and jointed in cement mortar (1:3) with grey cement and pointed with laticrete steller grout to to match the shade of granite stone complete with and also including all cutting and waste; size of slab / tile and pattern of laying as per existing complete all as specified and as directed by Engineer-in-Charge.Note : - Screed bed shall be measured and paid for separately

Material and Labour sand stone slab 30 mm to 35 mm thick in radial/straight dressed any size and shapeas in coping and ceiling of ventilator to be fixed with one number SS-304 grade clamp,10 mm dia SS fastner and SS pin ( 01 No in each sand stone ) including drilling hole and also including all cutting and waste complete allcomplete all as specified and as directed by Engineer-in-Charge Note :-

M & L for 30 mm thick sand stone coping / wall cladding for citation board bedded and jointed in cement mortar (1:3) with grey cement and pointed with white cement1 : 2 using stone dust with admixture of pigment to match the shade of stonecomplete all as specified and as directed by Engineer-in-Charge. (using beige colour) Note : - Screed bed shall be measured and paid for separately

M & L for 40 mm thick Rough sand stone as per existing coloured coping of column fixed with SS-304 grade clamp,10 mm dia SS fastner and SS pin complete all as specified and as directed by Engineer-in-Charge. Note :- Nos of clamp and fastner as per site requirement.

Material and Labour for 20 mm thick polished granite (of any type) as in floor machine cut, bedded over screed bed and jointed and pointed with laticrete steller grout to match the shade of granite stone complete and also including all cutting and waste; size of slab / tile and pattern of laying as per existing complete all as specified and as directed by Engineer-in-Charge.Note : - Screed bed shall be measured and paid for separately

Material and labour polished Granite 20mm thick for coping on curve/ straight surfaces beded over screed bed and pointing with laticrete steller grout to match withshade of granite complete all as specified and as directed by Engineer-in-Charge. Note : - Screed bed shall be measured and paid for separately

Material and labour polished Granite 20mm thick for wall straight/ curve surfaces over screed bed jointing & pointing with laticrete steller grout to to match with shade of granite complete all as specified and as directed by Engineer-in-Charge. Note : - Screed bed shall be measured and paid for separately

Material and labour 30 mm polished lakha red Granite in dry cladding with paper joint and fixed with SS-304 grade clamp,10 mm dia SS fastner and SS pin (This item operative only in isolation )complete all as specified and as directed by Engineer-in-Charge. ( 01 nos clamp per tile of size as suiatble and approved )

Material and Labour Flamed Granite 20 mm thick (of any type), for wall lining (veneering to wall)over and incl 15 mm thick rendering cement mortar 1:4 jointing and pointing with laticrete steller grout to match with shade of pigment to match with shade of granite stone complete all as specified and as directed by Engineer-in-Charge.

Material and labour flamed Granite 20mm thick for coping in radial / straight surfaces including drilling of holes as per site requirement, in cement mortar 1:4 and pointing with laticrete steller grout to match withshade of granite stone complete all as specified and as directed by Engineer-in-Charge.

Material and Labour 20 mm thick sand stone cladding with rough surface, with machine cut edges, set and jointed in cement 1:4 and pointed in cement (1:3) mix with approved pigment to match as in venering to wall, pillar .complete all as specified and as directed by Engineer-in-Charge

M&L 30 mm thick polished lakha red granite wet cladding on wall/ facia of tyag chakra wall over 20 mm thick CM 1:4 including all cutting (in shape ,size and design ) , wastage and drilling hole in stone as per site requirement, complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repair Red Sand stone pillars of height 1050 mm of 125 mm X 125 mm square size (existing design) for fixing Jalli of existing design, around the Chhatri including jointing in CM (1:3) with pigment to match the shade of work complete all as specified and as directed by Engineer-in-Charge.

M&L for fixing in repair 40 mm thk lakha red granite grating size 500x500 mm having holes/slots as per existing including necessary cutting grinding etc complete all as specified and as directed by Engineer-in-Charge.

M&L for fixing in repair 40 mm thk Z-brown granite grating size 500x500 mm having holes/slots as per existing including necessary cutting grinding etc complete all as specified and as directed by Engineer-in-Charge

M&L for fixing in repair 40 mm thk beige colour granite grating size 500x500 mm having holes/slots as per existing including necessary cutting grinding etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair of 40X40mm Lakha Red granite Strip in steps (radial/curve) fixed with araldite complete all as specified and as directed by Engineer-in-Charge.

Cleaning and refixing of 40X40mm thick lakha red granite strip in steps (radial/curve) with araldite complete all as specified and as directed by Engineer-in-Charge.

M&L in repair Tactile design made 20mm thick granite stone tile size-30cmx30cm (straight direction and stop direction),laid over cement screed and jointed in cement and sand mortar 1 : 3 and pointed with laticrete steller grout to match the shade of work complete all as specified and as directed by Engineer-in-Charge. Note: Screed bed shall be measured and paid separately.

M&L in repairTactile design M-25 made 20mm thick concrete tile size-30cmx30cm (straight direction and stop direction) laid over cement screed and jointed in cement and sand mortar 1 : 3 and pointed in colour cement to match the work complete all as specified and as directed by Engineer-in-Charge.

Material and Labour glazed ceramic (coloured) tiles of size 300 to 350 mm x 450 mm x 6 mm to 7 mm thick, as in dado / skirting, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 10 mm thick Cement Mortar (1:4) and also including all straight/ nosing cutting and waste of tiles complete all as specified and as directed by Engineer-in-Charge.

Material and Labour vitrified ceramic tiles 10 mm thick (square or rectangular) polished, of light shade, area of each tile not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 20 mm thick screed bed in cement mortar (1:6) and also including all straight cutting and waste of tiles complete all as specified and as directed by Engineer-in-Charge.

M&L screed bed or bedding layer 20 mm thick of cement mortar 1:4 for laying 20mm thick granite stone and 40 mm sand stone complete.all as specified and as directed by Engineer-in-Charge.

Material and labour in repair 80mm thick flamed finished granite stone seat of size 1200mm x 600 mm as per existing shape and design with and including mounting pedestals of 100mm thick flamed granite fixed to the base with stainless steel rod of 10mm dia and 150mm length embedded in the concrete base complete all as specified and as directed by engineer- in-charge.Note:- a) the unit rate quoted shall be deemed to include for stone seat as well as pedestals cut to shape and size in monolithic pieces separetely and jointed together using tongue and groove joined and approved adhesive complete b) the fixing arrangement of seat on the ground shall be all as specified in the description of item. complete all as specified and as directed by Engineer-in-Charge

Material and labour in repair 80mm thick flamed finished granite stone seat of size 1500mm x 600 mm as per existing shape and design with and including mounting pedestals of 100mm thick flamed granite fixed to the base with stainless steel rod of 10mm dia and 150mm length embedded in the concrete base complete all as specified and as directed by engineer- in-charge.Note:- a) the unit rate quoted shall be deemed to include for stone seat as well as pedestals cut to shape and size in monolithic pieces separetely and jointed together using tongue and groove joined and approved adhesive complete b) the fixing arrangement of seat on the ground shall be all as specified in the description of item.complete all as specified and as directed by Engineer-in-Charge

Refixing only 80mm thick flamed finished granite stone seat of size 1500mm x 600 mm in same location with and including mounting pedestals of 100mm thick flamed granite fixed to the base with stainless steel rod of 10mm dia and 150mm length embedded in the concrete base complete all as specified and as directed by engineer- in-charge.

Material and Labour for etching of letters and alphabet (Numericasl and English Alphabet Capital size as per existing pattern) of martyr,s showing service No, Rank with name and unit name on existing granite stone tablets by way of sand blasting content cutting using electric opereted compressor machine including two coats of gold painting of etched figures incl surface preparation using acrlyic super fine multipurpose premium finish vapacure gold paint make MRF or equivalent in Asian/Berger /Nerolac in following manner -complete all as specified and as directed by Engineer-in-Charge. Note : (a) Service No and unit Name of martyr in Height 1.3 cm , 1.25 mm deep and 3mm line thickness. (b) Rank and Name of Martyr in Height 1.8 Cm , 1.25 mm deep and 3mm line thickness and size of year in Height is 3 cm, 1.25mm deep and 4mm line thickness (c) Before etching details on granite tablets ,the contractor shall submit hard copy on papaer and then prototype stencil developed on plastic sheet for approval of project director (d) The quoted rate shall include all incidental charges.

Material and Labour removing old paint and applying TWO coats of gold painting of etched alphabet/numericlas (size 70 mm height and 12 mm width ) with acrlyic super fine multipurpose premium finish vapacure gold paint of make MRF or equivalent in Asian/Berger /Nerolac in following manner - (a) First coat using mechanical spray machine including removal of indesirable paint marks using approved chemicals of M/S Bansilal and Sons , Woodspa and manually with steel blade as directed (b) After half hour apply Second coat using mechanical spray machine including removal of indesirable paint marks using approved chemicals of M/S Bansilal and Sons , Woodspa and manually with steel blade as directed

Material and Labour erasing of existing Numericals and English Alphabet with wire brush and MS blade with approved chemical of tablet front and top portion complete and applying TWO coats of gold painting of etched figures, incl surface preparation using acrlyic super fine multipurpose premium finish vapacure gold paint make MRF or equivalent in Asian/Berger /Nerolac in following manner - (a) First coat using mechanical spray machine including removal of indesirable paint marks using approved chemicals of M/S Bansilal and Sons , Woodspa and manually with steel blade as directed (b) After half hour Second coat using mechanical spray machine including removal of indesirable paint marks using approved chemicals of M/S Bansilal and Sons , Woodspa and manually with steel blade as directed (c) Fixing of mastic tape on incribed area of tablet before painting.

M & L for grinding and polishing including erasing of letters and numericals on existing tablets complete all as specified and as directed by Engineer-in-charge

M & L for polishing including erasing of any type of spots on existing granite tablets complete all as specified and as directed by Engineer-in-charge

Fixing only in repair 30 mm polished lakha red Granite dry cladding with paper joint and fixed with SS-304 grade clamp,10 mm dia SS fastner and SS pin as in obelisk upto 13 mtr height complete all as specified and as directed by Engineer-in-Charge. Note:- (i) Rate quoted shall interalia niclude consideration of double legged working platform to be made of GI pipe, plates etc. (ii) Stone shall be provided by department free of cost.

Refixing of Sodier Gun with aerldite or other chemical complete all as specified and as directed by Engineer-in-Charge. .

M&L Cleaning of Stone Mural and applying Natural stone protector L 190 sealer MYK LATICRETE complete all as specified and as directed by Engineer-in-Charge.

Taking out and refixing in properly 40 mm thk granite grating from one place to other place in war memorial complex of size 500x500 mm including necessary cutting grinding etc complete all as specified and as directed by Engineer-in-Charge.

Grinding & Polishing of granite stone not exceed 25mm width and not exceed 7mm depth complete all as specified and as directed by Engineer-in-Charge.

Fabricating, Supplying, Fixing and Erecting in position PVC Park Citation Totems in English & Hindi (bi-lingual) of overall size 600 mm x 1050 mm fabricated out of 20 mm thick Beige & Red Colour Sand Stone base 20mm thick sand stone on inclind surface and applying water proofing chemical treatment using approved chemical of makes Dow Corning / Parma / Akemi on stone for protection, applying approved adhesive of makes KERAKOL - H-40 No Limit or equivalent of LATICRETE / Dr. Fixit on back side of sand stones and etching letters(250 words in Hindi and 250 words in English) of size 17.5 mm height, 3 mm depth and 5 mm line thickness, complete all as specified and as directed by Engineer-in-Charge. Note : (a) Before etching details on granite tablets ,the contractor shall submit hard copy on papaer and then prototype stencil developed on plastic sheet for approval of project director (b) The quoted rate shall include all incidental charges

Material and Labour for etching of Numerical and alphbet on 20mm thick polished granite stone by way of sand blasting content cutting using electric opereted compressor machine TWO coats of black paint of etched figures incl surface preparationcomplete all as specified and as directed by Engineer-in-Charge. Note : (a) Size of letters Height 1.5 cm , 1.5 mm deep and 4mm line thickness. (b) Before etching details on granite tablets ,the contractor shall submit hard copy on papaer and then prototype stencil developed on plastic sheet for approval of project director (c) The quoted rate shall include all incidental charges.

M&L for Rounding to edge of 20 mm polished granite stone on tyag chakra wall including grinding and polishing as per existing sample complete Note :- sample all ready done on wall No 4D

Fabricating, Supplying, Fixing in repair and Erecting in position Internal Directional Totems in English & Hindi (bi-lingual) fabricated out of a combination of 20 mm thick Beige & Red Colour Sand Stones base, the fabrication of signage comprising of calibration on back side of stones for even thickness for fixing and pasting of stones, cleaning the stone surfaces and applying water proofing chemical treatment using approved chemical of makes Dow Corning / Parma / Akemi on stones for protection, applying adhesive of makes KERAKOL - H-40 No Limit or equivalent of LATICRETE / Dr. Fixit on back side of sand stones and fixing the sand stones on 20 mm thick granite stone including edge cutting, bevelling and polishing of Sand Stones,etching letters of size 75 mm height, 4mm depth and 10mm line thickness and the design (as shown on drawing) in the red / beige colour sandstones, stucco inlay of red / beige colour in the etched letters and design on sand stones, including 6 mm thick approved acrylic and covering the border of the frame of the signage structure with matching sand stone a complete with and including cost of development of prototypes / mock ups before final approval and production and all other components, accessories required for signage work as per best trade practices and all other incidental charges complete all as shown on drawing, as specified and as directed by Engineer-in-Charge.

M&L in repair Red Sand Stone Jalli of size 900mm x 900mm of intricate design, including jointing as per best trade practice as per existing complete all as specified and as directed by Engineer-in-Charge.

Supplying and Fixing in repair bib cock, brass chromium plated, screwed down for 15 mm (½”) dia pipe, Cat Part No. ARI-39037 of make 'JAQUAR' complete all as specified and as directed by Engineer-in-Charge.

S&F in repair CP quarter turn basin pillar cock model no ARI-39011 of make "Jaquar" complete all as specified and as directed by Engineer-in-Charge

S& F in repair Health faucet including wall bracket (Model No. ALD-CHR-579 of make "JAQUAR" complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repair 1.2 meter long easy flex tube in chrome finish and wall hook with NRV complete (Model No. ALD-CHR-579 of make "JAQUAR" or equivalent of makes ("HINDWARE"/ "PARRYWARE") complete all as specified and directed by Engineer-in-Charge.

Taking out existing steller grout between joints of flooring / Wall with manually/ mechanically and cleaning with blower and applying laticrete steller grout as per existing colour in between joints of flooring/wall 2 to 6 mm thick and 10 mm depth complete all as specified and as directed by Engineer-in-Charge.

Cleaning of sewage sump of size 1.8 m x 1.2 m x1.8 m in any situation manually or mechanically including dewatering complete and removal of all sewage sludge etc including removing the taken sludge out side of national war memorial area complete all as specified and as directed by Engineer-in-Charge.

supply and fixing Factory made solid PVC door shutter 30 mm thick, with particle board core and 2,4,or 6 raised panel esign with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face and 2mm prelam PVC sheet on back face for complete all as specified and as directed by Engineer-in-Charge.

Taking down PVC Door shutter but exc 1. Sq.m and n.exc 2 sq.m each complete all as specified and as directed by Engineer-in-Charge.

Excavation in trenches not exceed 1.5 m wide and not exceed 1.5 m in depth for foundation etc in soft/loose soil complete all as specified and as directed by Engineer-in-charge.

Returning, filling including spreading levelling, watering and well ramming in layer not exceed 25 cm thick in soft/ loose soil complete all as specified and as directed by Engineer-in-charge

Supply and fixing in repair of 9 V lithium battery in sensor urinal Make- Ultra life or equivalent complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for etching of numerical figure ( eg. 2021 , 2022, 2023 etc ) and English alaphabet in capital letter as per existing size and shape on existing granite stone tablets by way of sand blasting content cutting using electric operated compressor machine incl Material and Labour preparation of surface incl covering the unscribed area of tablet with paper tape and applying two coats of acrylic super fine multipurpose premium finish vapcure bright gold paint of etched figures of make MRF or equivalent in Asian/Berger /Nerolac in following manner - (a) First coat using mechanical spray machine including removing of plastic sheet and indesirable paint marks using approved chemicals of M/S Bansilal and Sons , Woodspa and manually with steel blade as directed (b) After half hour Second coat using mechanical spray machine including removing of plastic sheet and indesirable paint marks using approved chemicals of M/S Bansilal and Sons , Woodspa and manually with steel blade etc as directed. NOTE (i) Before etching details on granite stone tablet , the contractor shall submit hard copy on paper and also prototype stencil developed on plastic sheet for approval of Project Director. The quoted rate shall inter alia include cost of this provision. (ii) Numerical and English alphabet in height 30mm, 2mm deep and 5mm line thickness

Material and Labour for etching of numerical figure eg (2020 or 2021 or 2022) and English alaphabet ( name of operation) in capital letter on existing granite stone tablets by way of sand blasting content cutting using eletic operated compressor machine incl Material and Labour for TWO coats of gold painting of etched figures incl surface preparation executed inder item No 179 above using acrlyic super fine multipurpose premium finish vapacure gold paint make MRF or equivalent in Asian/Berger/Nerolac in following manner- (a) First coat using machanical spray machine including removal of indesirable paint marks using approved chemicals of M/S Bansilal and Sons, Woodspa and manually with steel blade as directed. (b) After one hour Second coat using mechanical spray machine including removal of indesirable paint marks unsing approved chemicals of M/S Bansilal and Sons, Woodspa and manually with steel blade as directed NOTE Before etching details on granite stone tablet, the contractor shall submit hard copyon paper and also prototype stencil developed on plastic sheet for approval of Project Director. The quoted rate shall inter alia include cost of this provision. SIZE shall be 2.5 cm high. 1.25 mm deep and 5mm line thickness.

INGENIOUS CREATIONS INDIA

M/s Sawdeshi Cool Air

GEETANSHI SERVICES