SPL REPAIR TO BOUNDARY WALL AT OVL, 1 RAK, 15 THIMMAYA ROAD AND 1 SP MARG AND SPL REPAIR TO MD ACCN BLDG No T99 AND T 100 AT BHAGAT LINE UNDER GE (WEST) LUCKNOW

Amount

Demolition of Concrete concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

Demolition of old brick work or stone/boulder masonary built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and precast articles complete all as specified and directed.

M&L for brick work with fly ash bricks of class designation 75, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L 15 mm thick rendering in CM (1:4 ) on brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft/ loose soil complete all as specified and directed.

Removing surplus excavated material soils exc. 250m but n.exc. 500m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M & L for preparation of new plastered surface of walls by washing rubbing and applying two coats of cement based paint over a coat of white cement primer complete all as specified.and directed. .

M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs, hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

M&L cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

S&F structural steel framed work with rolled mild steel sections as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-290 (Gde E-165) complete all as specified and directed.

M&L mild steel framed work such as posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting and/or welding etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed. NOTE: Each line of wire to be measured.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint of approved tint over a coat of red oxide primer all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of framed truss n.exc 10m span complete all as specified and directed.

Dismantling of wall and ceiling board (fibre, pulp,insulation etc ) any thickness including cover fillets complete all as specified and directed.

Dismantling Plain or corrugated steel shetting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

Dismantling stone slab and tiles of any description or thickness laid bedded & pointed in any mortar complete all as specified and directed.

S&F 'E' board everest make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick GS sheet and of size 24x32x300mm and fixed at 1200mm center securely fixed to structural soffts by approved hangers at 1200 mm maximum centre to centre. Hangers of GI wire 4mm dia to be fixed by approved rawl plug level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall, Flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm center to from 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm dodules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture's instructions complete all as specified and directed.

S&F in repairs multi-rib TM profile, tensile strength 550 Mpa, colour coated 0.50mm thick pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet, having maximum pitch of 250mm c/c and minimum 30mm crest depth in length as per site requirement, the feed material manufactured out of 0.50mm (TCT) with coating of 18-20 microns top coat over 5 microns primer and 8-10mm alkaline back of zinc aluminium alloy of AZ-150, including the sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium 55% and silicon 1.5% with total mass coating of 150 gms/sqm on both sides having covered width 1020mm and return leg for proper side lap as in roof covering/ cladding and fixed with self tapping screws with EDPM seal complete all as specified and directed.

S&F in repairs multi-rib TM profile, tensile strength 550 Mpa, colour coated 0.50mm thick pre-painted galvalume aluminium zinc coated GI based plain steel sheet, having maximum pitch of 250mm c/c and minimum 30mm crest depth in length as per site requirement, the feed material manufactured out of 0.50mm (TCT) with coating of 18-20 microns top coat over 5 microns primer and 8-10mm alkaline back of zinc aluminium alloy of AZ-150, including the sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium 55% and silicon 1.5% with total mass coating of 150 gms/sqm on both sides having covered width 1020mm and return leg for proper side lap as in roof covering/ cladding and fixed with self tapping screws with EDPM seal complete all as specified and directed.

M & L for Providing and laying of rubber moulded Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and no pigment over and including 25mm thick sand cushion for laying of tiles etc, including spreading, levelling and laying in layers tamping to true surface and joint of tiles filled with fine sand including leveling tamping & sweeping etc complete all as specified and directed.

M&L 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) in sub base of flooring complete all as specified and directed

M&L Continuous brick edging with width equal to depth of brick laid dry on edge using sub class B bricks complete all as specifed and directed.

M & L MS framed work as in truss, purlin or rafter of angle iron including distance pieces cleats etc of Fe - 410- W(Gde - E 250 quality B) complete all as specified and directed

Material and labour for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed in cm 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size ( 300 x200mm ) x 7-8mm thick on walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles as in skirting/dados over and including 10mm thick screed in cm 1:4 complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but not exc 4.0 Sqm each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete all as specified and directed.

Supply and Fixing Pressed steel frames size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

Supply and Fixing Steel Box type Windows/Ventilators with both provisions ie glazed and gauzed double panel / single panel shutters, Gauged shutter shall be fixed in inner side and glazed shutter shall be fixed at outer side of the frame. The section of outer frame shall be 60 x 45 mm, F/S mullion/ transum 60x30x25 mm, F/S shutter frame 50x35x20mm, with handle and stopper of Z sec of size 20 x 25x 20mm The section shall be made of ERW Section of 16 Gause. 02 Nos of Box type hinges 75 mm long 12 mm dia with one part of hinges spot welded with frame and other with shutter for each openable shutter. 04 Nos of flat iron hold fast shall be welded with each window. 100 mm long handle and 150 mm long tower bolt shall be welded to each openable shutter. 10 mm square guard bar shall be provided @ 125mm c/c. Details shown in CELZ Drawing No LZ/C-TD/130 SHEET NO 1/4 to 4/4 . Note: Glass panes and wire mesh shall be measured and paid separately under schedule of items.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing as mentioned in SSR-2020.(Make- Rajshri/Syntax/Dura plast)

Supply and fix Factory made solid PVC Chowkhat /Door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm thick rigid PVC foam sheet coloured, reinforced with 19x19mm MS square tube of 19 gauge including rubber gasket, PVC fasteners, screws, brackets as per SSR Part –II (2020) complete all as specified and directed.(Make- Rajshri/Syntax/Dura plast)

S&F 2nd class HW plain,solid,straight and framed wrought,framed rebated,on the solid rounded or chamfered put together with glue pinned complete all as specified and directed.

M&L 2nd class HW Plain fillets. square, rectangular or triangular in section, clean sawn, se-cured with screws or brads exc 13 & not exc 25 sqcm complete all as specified and directed

S & F 19 mm thick BWR plywood interior grade both side with comercial face fixed with screwed to timber frame work edge chamfered complete all as specified and directed.

S & F 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

Supply & fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm fixed with stainless steel staples to windows complete all as specified and directed.

S&F Expanded metal, cut to length,bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members weight not exeeding 4 Kg/Sqm complete all as specified and directed.

S&F 100 long Butt hinges, Medium weight, cold rolled mild steel, and fixed (ISI Marked) complete all as specified and directed.

S&F 150mm long alumunium anodised barrel tower bolts of extructed section complete all as specified and directed.

S&F 200mm long alumunium anodised barrel tower bolts of extructed section complete all as specified and directed.

S&F for alumunium handle cast type anodised 150mm long complete all as specified and directed.

S&F for aluminium alloy anodized sliding door bolt 250mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed.

S&F for 3mm thick sheet glass ordinary quality of glazing with oil putty or wooden beads in square not exc 0.5 sqm each pane complete all as specified and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane, complete all as specified and directed.

Supply and fixed 30 mm thick flush shutter solid core construction with block board core and ply wood panels commercial type on both sidecomplete all as specified and directed.

S&F 2nd class hard wood 35mm thick glazed and skelton shutters, open rebated and prepared to receive glass or gauge etc divided into squares with plain champhered or rounded, mitred and rebated sash bars any numbers and fitted to chowkats including beads for securing glass/guage, size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I 2009 complete all as specified and directed.

Material and labour for preparing new wood or wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for 18-20mm thick Kota stone laid and jointed in neat cement slurry including labour for cutting of Kota slab laid over and including 20mm thick screed bed in cm 1:6 including granite polish on Kota slab all as specified and directed.

All as per Item No. 52 above but on vertical surface such as dado, skirting etc over and including 15 mm thick skirting in CM 1:4 complete all as specified and directed.

M&L for 50 mm thick PCC 1:3;6 type C-2 using 40mm graded stone aggrtegate as in plinth protection including finsihing even & smooth without using extra cement complete all as specified and directed.

Cutting chases exc 10 cm but n.exc 20 cm and pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good complete all as specified and directed.

Supply only Liquid water proofing compound of approved make complete all as specified and directed.

Dismantling brick tiles or terracing tiles, single layer of roofs complete all as specified and directed.

Taking down cement plaster from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L 15 mm thick rendering in CM (1:6 ) on fair faces of brick wall or concrete surfaces finished fair and even complete all as specified and directed.

M&L 5 mm thick rendering in CM (1:3 ) on any faces of brick wall or concrete surfaces on ceiling finished fair and even complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade complete all as specified & directed.

M&L for preparation of new plaster surface on ceiling and apply three coat of white wash on ceiling complete all as specified & directed.

M&L preparation of Old plastered surface of walls applying one coat of oil bound distempe rcomplete all as specified & directed.

M&L for preparation of Old plaster surface on ceiling and apply two coat of white wash complete all as specified & directed.

M/L preparation of Old plastered surface of walls and applying a coat of cement based paint complete all as specified & directed.

Taking down steel tubing and connection 15mm bore incl cleaning for refixing or removing from site complete all as specified & directed.

Taking down steel tubing and connection 20mm bore incl cleaning for refixing or removing from site complete all as specified & directed.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.

Supply and fixed in repairs vitreous china wash hand basin flat back size 550x400mm incl 02 Nos angle iron bracket 40x40x5mm bracket CP waste coupling,and 32mm dia PVC waste pipe, CP pillar tap 15mm dia complete all as specified and directed.

Supply and fixed in repair CP Brass Tubular Towel Rail, 20mm dia D type 60cm long between flanges complete all as specified and directed.

S&F Vitreous China squatting pan, 'Orissa pattern', size 580x440mm, white, with integral foot rests including PVC 'P' or 'S' trap, excluding flushing cistern and flush pipe, including connection to trap and flushing pipe etc. and making good to floor complete all as specified and directed.

Supply and fixed in repair 75 mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

Supply & Fixing in repair PVC flushing cistern 10 Ltrs capacity including all fitting flush pipe etc complete all as specified and directed.

Supply & Fixing in repair 15mm bore PVC connection 450mm long with brass/PVC coupling and washer complete all as specified and directed.

Supply & Fixing in repair fancy long body type cast copper alloy bib taps chromium plated suitable for 15mm bore pipe with captain head complete all as specified and directed.

Supply & Fixing in repair 15mm dia fancy type, chromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to 15 mm bore steel pipe or union complete all as specified and directed.

Supply & Fixing in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 500 litres capacity triple layered rotational molded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified in SSR Part-I including ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed suitable for 20mm bore pipe (Min weight 210gms) complete all as specified.

S&F in repair 20 mm bore ball brass valve high pressure with polythene float and flynut complete screwed for iron pipe or brass ferule and fixed complete all as specified and directed.

S&F in repair 110mm bore dia PVC soil, PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 75mm bore dia PVC soil, PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and waste, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 915mm x 460 mm with bowl size 410mm x 330mm x160 mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink complete all as specified and directed. Make: Nirali/ Neelkanth /Diamond/Jayna

S & F in repairs stainless steel Kitchen plate rack of overall minimum size 750 mm x 600 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed.

S&F glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete all as specified and directed. Make: Jaquar range OR equivalent

S&F 40mm bore PVC low density (LDPE) pipe of pressure 6kg/Sqcm fixed to wall or laid in floor, complete all as specified and directed.

S&F 18/19 mm thick Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F ball catches with 8 mm dia steel ball and brass body and strike plate magnet ball catcher for cup board shutters complete all as specified and directed.

S & F continuous (piano) hinges miled steel bright finished or electro galvanised having 30mm width of flap when open complete all as specified and directed.

S & F brass polished 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

Demolition of reinforced cement concrete in floors ,beams ,chajjas,landing slab in any position or height and similar suspended works complete all as specified and directed.

M & L RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in slab,chajjas,beam etc complete all as specified and directed.

M & L for Form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exc 200mm thick complete all as specified and directed

M&L 8 to 10mm dia and over TMT bar, cut to length, bent ot shape required, including cranking, bending , hooking ends and binding with and including mild steel wire(annealed not less than 0.9mm dia) icluding welding,rivetting etc complete all as specified and directed

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per item no 98 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per item no 98 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per item no 98 above but for one bell/buzzer point on an independent board.

All as per item no 98 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.

S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Switch bell push flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 15/16 Amp, 230 volts complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and directed.

S & F in repairs call bell AC single pole 240 volts complete all as specified and directed

S&F ceiling fan regulator, electronic, rotary step up socket type, 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and directed.

M & L for sand cushioning to under ground cables 8cm deep before laying of cable and 15cm deep over the cable and punned down to 18 cm complete all as specified and directed.

Supply and laying sub class 'B' bricks old size over LT cable as in cable protection laid perpendicular to the axis of cable complete all as specified and directed.

Supply and laying 40mm bore GI pipe light grade as in trenches, fixed to wall etc as in cable protection pipe complete all as specified and directed

Supply, laying or passing through pipe XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts garde, cross sectional area of 10Sqmm 2 core complete all as specified and directed.

S&F sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4 Sqmm nominal cross sectional area and one run of 4sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25 mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as specified and directed by Engr-in-charge. Make Phillips Smart brite cat No BN 021 LED 22S 6500 PSU GR/SI or/Havells Endura linear neo cat No enduralinear neo BS22WLED865SPCWH/ Bajaj LED batten BCLAB 20W WH LED P

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as specified and directed.Make:Phillips smart brite cat no BN 021 LED 12S 6500/4000 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS10WLED865SPCWH/ HPL Neptune plus 10 w HLPT51510CW

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, single pole & neutral 40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

Taking down existing ceiling fan, exhaust fan or geyser of any type and capacity and fixing back to location as directed including making all electric connections complete all as specifed and directed.

S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts. Make philips Green line smart cat No BRP042 LED 25 CW R1 S1 PSU GR/ Bajaj Edge nxt LED cat No ENXT P 24L WH CR PC SD/ Eveready Mini might cat No LED SL025157-02

M & L of Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade, watering pipe 20 mm dia GI light grade, GI wire mesh, GI funnel, alternate layer of char coal and salt, PCC chamber, recessed for and including RCC cover including all necessary excavation & earth work, earth 7.5 mtr wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 2009 complete all as specified and directed .

M/s Sultan Khan

G S ENTERPRISES