Construction of Non-Executive Canteen at Dam Site of Teesta-V Power Station

Amount

Earth work in excavation by mechanical means (Hydraulic Excavator ) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Providing and laying in position cement concrete of specified grade including compacting curing etc all complete: 1:3:6 mix (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm & down size).

Filling with available excavated earth in trenches, plinth and side of foundation in building works with layers not exceeding 20 cm in depth including consolidation of each layer by ramming, watering etc all complete.

Providing and laying in position cement concrete of specified grade including compacting curing etc all complete : 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm & down size).

Providing, fixing and removing form work for casting RCC items as indicated below: with locally available timber-Foundation, footing, base of column etc for mass concrete.

Providing, fixing and removing form work for casting RCC items as indicated below: with locally available timber- Square Columns.

Providing, fixing and removing form work for casting RCC items as indicated below: with locally available timber- Beam, Lintels, girders, bresumers and cantilevers.

Providing, fixing and removing form work for casting RCC items as indicated below: with locally available timber- Floor slab, roof slab, landing, balcony and access platform.

Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Supplying, bending and placing in position tor steel reinforcement in all RCC works including cost of binding wires, all complete.

Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. Size of tiles, 2Ftx2Ft of more.

Brick work with non- modular fly ash bricks single sided frog (size-240X110X70 mm) conforming to IS:12894, Class designation 10 average compressive strength in super structure from plinth level up to 1st floor level in : Cement mortar 1:4 (1 cement : 4 coarse sand).

Providing and Laying 12mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing complete.1:4 mix.

Providing and Laying 15mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete:1:4 mix.

6mm cement plaster of mix: 1:3( 1 cement: 3 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing fitting and fixing water proof flush doors shutters, solid block hard core construction with frame of 1st class hard timber, with well matched 3mm commercial ply (both faces) including hinges with screws complete. 30mm.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing anodized aluminum works for doors, windows, ventilators and partitions with extruded built up standard tubular or other section of approved make confirming IS 733 and IS 1285, fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners i/c necessary filling up the gaps at junctions, at top, bottom and sides with required PVC / neoprene felt, etc. Al. section shall be smooth, rust free, straight, mitered and joined mechanically wherever required i/c cleat angle, Al snap beading for glazing / paneling CP brass / stainless screws, all complete as per design and drawings and the direction of the Engineer - in - Charge.

Wall painting with Luxury emulsion Royale shine Asian paints or equivalent of of equivalent of interior grade in required color and shade, including applying additional coats wherever required to achieve even shade and color. Two coats.

Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete

Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface.

Providing and French spirit polishing two or more coats including cleaning of the surface of dirt and dust papered smooth etc on new surface complete.

Providing, fitting, fixing of 24 BWG Pre-painted HULAS sheet roofing with lapping of 150mm (two corrugation) with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including carriage all complete.

Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG pre painted (HULLAS) Sheet fixed with G.I, J or L hooks bolts & nuts 8mm dia Limpets, Bitumen washers etc. all complete.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Providing, fitting and fixing. handles 125mm size with necessary screws etc complete- Brass (Chromium Plated)

Providing, fitting and fixing. Tower bolts 250x10mm with necessary screw etc complete- Brass (Chromium plated)

Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete- MS 250x16mm Size- Brass (Chromium Plated).

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT)- STOP COCK 15 MM DIA (CONCEALED WORKS)

Providing and fitting stain less steel kitchen sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and making good the wall wherever required. (610X450X200 mm)

Providing and laying 20mm thick granite stone in Risers of steps, skirting and pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per diection of engineer in charge.

Providing, fitting and fixing soil waste and vent pipes including testing etc complete. 100 mm dia. PRINCE/SUPREME or equivalent soil pipe.

Providing, fitting and fixing Chromium plated fittings of approved quality and size complete: (Make Jaquar Model ALI-CHR-85053 / Equivalent) Angle Cock size 15mm with wall flange.

Providing, fitting and fixing towel ring of square size chromium plated brass complete with CP brass screw and timber cleats. Jaquar Model AKP-CHR-35721P / equivalent.

Providing and fitting chromium plated toilet roll holder with stainless steel flap (Jaquar/equivalent. (Model No. AKP-CHR-35753PS)) including the making holes and fixed to cleats with CP screws washer etc. all complete.

Providing, fitting and fixing soap dispenser with glass bottle. Jaquar Model AKP-CHR-35735P/equivalent.

Providing and fitting. White vitreous table top wash basin with 32mm CP brass bottle trap, CP waste coupling i/c cutting and making good the walls wherever required. JAQUAR (ILS-WHT-5931)/Equivalent. Wash basin Size (510X360X120 mm) etc. Complete.

Providing, fitting and fixing. white vitreous white china wash flat back basin with CI ackets, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia CP brass cap and unions, complete including cutting and making good the walls wherever required. HINDWARE. One wash basin with one pillar cock. (63 cm x 45 cm)

Providing, fitting and fixing Chromium plated fittings of approved quality and size complete: (Make Jaquar Model ALI-CHR-85053 / Equivalent). Pillar Cock size 15mm.

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (Jaquar / Equivalent) - single lever basin mixer without popup waste system Jaquar model XQU-CHR-43011B

Providing, fitting and fixing. white vitreous china water closet (W.C) squatting pan (Orissa pan) 580mm size with 100mm SCI (Sand cast iron) P or Strap, 10 ltr low level flushing cistern with fittings, CI brackets, 32mm flush pipe with fittings and clamps, 20mm overflow pipe, cutting and making good the wall and floor etc complete. Long type or Orrisa type pan. Orissa Pan 58x44 White CAT NO 20042

Providing and fixing white vitreous china rim less wall hung water closet (European type) with soft closing seat and lid, single piece slim concealed flushing cistern, control plate, cutting and making good the walls and floors wherever required etc. complete : Jaquar Jaquar model (ARS-WHT-3995381) (Jaquar model JCH-WHT-2400) (Jaquar model JCP-CHR-392415) /equivalent. size 370X545X370 mm.

Providing, fitting and fixing Chromium plated fittings of approved quality and size complete: (Make Jaquar Model VGP-CHR-81041/ Equivalent)- Two way Bib cock with wall flange.

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT),BIB COCK LONG BODY 15 MM DIA

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (JAQUAR/ EQUIVALENT) HEALTH FAUCET/COMAD SPRAY 8.0 mm dia 1.20 mtr long flexible tube with wall hook.

Providing, fitting and fixing. of chromium plated soap dish with necessary screw etc all complete. Jaquar/equivalent.

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (Jaquar model OHS-CHR-1605) - Shower rose square shape 150x150mm .

Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia Pipes.

Providing, fitting and fixing soil waste and vent pipes including testing etc complete. 75 mm dia. PRINCE / SUPREME soil Pipe.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm

GYALDEN THENDUP LEPCHA