Provision of Perimeter Lighting Along the New Perimeter Road from DVOR to ATC Tower at Jalgaon Airport.

Amount

Supply of following size 1.1 kV grade XLPE insulated and PVC sheathed aluminium conductor armoured cable, conforming to IS-7098 (Part-I) of approved make & as per technical specifications etc as required.

3.5 core x 50 Sq.mm.

4 core x 16 Sq.mm.

Supply of high efficency and low power consumption 30 watt LED street light luminaire having minimum 3000 lumens output with powder coated pressure die-cast aluminium housing and toughened glass / polycabonate cover, minimum IP 65 protection, weatherproof gasket for lamp and control gear accessories, integral electronic with in-built short circuit, over voltage, over load and 5 KV surge protection, suitable for mounting on existing bracket arm of 40 mm outer dia. pipe bracket, as per technical specifications etc. as required. (Make -Bajaj Model: BCLST 30W LED I / Make: Wipro Model: LR02-331-XXX-57-XX or Similar)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers, end caps etc. conforming to IS 16205, Part 24 complete with fitting and cutting, jointing etc. direct in ground (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

50 mm dia (OD-50 mm & ID-38 mm nominal)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.

Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/DWC pipe as required.

Up to 35 sq. mm

Above 35 sq. mm and up to 95 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

35 sq.mm (clamped with 1 mm thick saddle)

Supply, Installation, Testing and Commissioning of outdoor type feeder pillar panel made out of 14 SWG MS CRCA sheet, duly powder coated, dust tight & vermin proof, floor mounted, totally enclosed, cubicle type, free standing front openable distribution feeder pillar, suitable for operation at 415V, 3 Phase, 4 Wire, 50 Hz AC System complete with all accessories, interconnection, connection, earthing, painting, provided with bottom base channel and locking arrangements including excavation for foundation, providing PCC foundation, suitable MS channel frame with legs for grouting in foundation suitable for 45 cm mounting height, painting, fixing of panel etc. complete as required and as per technical specifications and comprising of the following:

(A) INCOMER

(i) 4P MCCB - 50 Amps, 18 KA with Thermal magnetic release, ROM & spreader terminals, Ics = Icu (Make L&T - DU100D or similar) - 1 No.

(ii) C. T. 50/5 Amps, 5 VA - 3 Nos.

(B) BUS BARS

(i) 25 x 5 mm Aluminium TPN Busbar - 1 Set

(C) OUTGOINGS

(i) 4P MCCB - 40 Amps, 10 KA with Thermal magnetic release, Ics = Icu (Make L&T - DY125U or similar) - 2 Nos.

(ii) SP MCB 6-32 Amp., 10 KA - 6 Nos

(iii) 3 Pole 30 Amp. Power Contactor (Make L&T - MNX 18 or similar) - 2 Nos.

(v) Analogue Time Switch (Make L&T - AUTS03ANA00 or similar) - 2 Nos.

(vi) ON/OFF Illuminated Push Button Actuators - Red & Green - 4 Nos

(D) METERING

(i) LED indicating lamp (RYB) - 1 Set with MCB for protection

Digital VAF + PF Meter, CL-1 (Make L&T - 4110 or similar) - 1 No. with MCB for protection.

Supply, Installation, Testing and Commissioning of outdoor type feeder pillar panel made out of 14 SWG MS CRCA sheet, duly powder coated, dust tight & vermin proof, floor mounted, totally enclosed, cubicle type, free standing front openable distribution feeder pillar, suitable for operation at 415V, 3 Phase, 4 Wire, 50 Hz AC System complete with all accessories, interconnection, connection, earthing, painting, provided with bottom base channel and locking arrangements including excavation for foundation, providing PCC foundation, suitable MS channel frame with legs suitable for 45 cm mounting height, fixing of panel etc. complete as required and as per technical specifications and comprising of the following:

(A) INCOMER

(i) 4P MCCB - 125 Amps, 30 KA with Thermal magnetic release, ROM & Spreader Terminals, Ics = Icu (Make L&T - DU125H or similar) - 1 No.

(ii) C. T. 100/5 Amps, 5 VA, CL-1.0 - 3 Nos.

(B) BUS BARS

(i) 25 x 10 mm Aluminium TPN Busbar - 1 Set.

(C) OUTGOINGS

(i) 4P MCCB - 50 Amps, 18 KA with Thermal magnetic release, ROM & Spreader Terminals, Ics = Icu (Make L&T - DU100D or similar) - 3 Nos.

(D) METERING

(i) LED indicating lamp (RYB) - 1 Set with MCB for protection

(ii) Digital VAF + PF Meter, CL-1 (Make L&T - 4110 or similar) - 1 No. with MCB for protection.

Extra for excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required

80 mm dia

Supply & making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XPLE aluminium conductor of 1.1 kV grade as required.

(a) 3½ X 50 sq.mm (35 mm)

(b) 3½ X 120 sq. mm (45mm)

(c) 4 X 16 sq.mm (28 mm)

Supply of 4.0 metre high hot dip galvanised octagonal poles (height with bracket - 4.5 metres) with 130 mm bottom A/F & 70 mm top A/F made up of 3 mm thick sheet, along with base plate of size 200 mm X 200 mm X 12 mm thick, along with suitable length bracket of 40NB A-class pipe for fixture mounting height of 4.5 metres, welded to collar plate of the pole and with suitable end to mount LED fitting at suitable angle as per lux level design, suitably designed door with space for internal junction box as per drawing and as per technical specifications etc. as required comprising following accessories: (Make: Bajaj or Similar) (a) Supply of 4 nos of M16X450 long 'J' type EN 8 grade foundation bolts along with template, 12 nuts and washers. (b) Bakelite sheet with 1 Nos of 6A DP MCB and stud type connector suitable for looping of 4Cx 16 Sq mm cable.

Erection of octagonal pole including positioning and fixing template & foundation bolts supplied by OEM in reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) foundation of size 0.40 Mtr x 0.40 Mtr x 1.2 Mtr height (Final size of foundation shall be as per foundation design) projecting 200 mm above ground, including excavation and refilling, steel reinforcement for RCC work, 50 mm OD DWC pipe sleeves for cables, numbering of poles, painting of exposed foundation etc. complete as required.

Supply & fixing of L-shape (0.70 Mtr. + 0.30 Mtr. long) bracket of 1 Mtr length made up of 40 mm dia "B" Class GI tubular pipe with end of pipe suitable to mount LED fixture including suitable size MS supporting base of thickness 5mm with socket and four nos. holes at one end including installation on wall / support with 8 mm steel fasteners etc. complete as required.

Supply & fixing of IP 66 weather proof loop in / loop out cable junction box suitable for outdoor installation, made out of thermoplastic polycarbonate (Make: Hensel CAT No. KF1616G (155 x 210 x 92 mm) or similar) with D-rail mounted terminals suitable for cable of size 10-16 Sqmm, with knockouts for cable entry, locking arrangement , 01 no earth terminal and 6 Amps MCB in junction box complete in all respect including fixing on wall with suitable 2 mm thick GI clamp etc. complete as required.

Installation, Testing and Commissioning of 30 W LED fitting on existing pole bracket / wall bracket including providing 3C x 1.5 sqmm PVC insulated copper conductor flexible cable of suitable length, connections etc. complete as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

M/s LEESHA ELECTRICALS

N L Neema

Techno Electricals

RVD INFRA SOLUTION PVT.LTD.

Mayur Electro Enterprises

Manish Electricals