Salem District - Tharamangalam Block - Construction of Public Toilet at Boothanur H/o Amaragundhi Panchayat Tharamangalam Union in MLACDS - 2025-26

Amount

Construction of Public Toilet @ Boothanur Paguthi H/O Amarakunthi Panchayat at Tharamangalam Block

Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and balling out water whenever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead and lift etc., including levelling the sites complete complying with standard specifications.

Cement concrete 1:4:8 mix ( one cement four sand and eight aggregate)using 40mm gauge hand broken granite tone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted, etc., complete comply

Brick work in cm 1:5 mix (one cement and five sand) using II class bricks of size 23 x 11 x 7 cm including curing, finishing and cost & Conveyance of all materials etc., complete.

Supplying and erecting centering for sides and soffits of RCC works of plane surfaces mentioned below including strutting 3m high using mild steel sheets stiffened with M.S angles

below G.L

Superstructure

RCC 1:1½:3 mix using 20 mm ISS HBG metal for RCC works excluding centering, shuttering, and reinforcement grill but including laying, ramming, curing etc., complete

Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete

Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the Executive Engineer before use of work).

PLASTERING with cement mortar 1:5 (one cement and five sand)12mm thick in all floors complying with standard specifications.

Dadooing the walls with colour glazed tiles in cement mortar 1:2 mix (One cement and two sand) 10mm. Thick using best quality of glazed tiles of size 15cm x 15cm x 6mm. Including pointing with white cement using 0.40kg Per square metre including finishing the joints and pointing flush with tile surface etc., complete including plastering the walls with cement mortar 1:5 mix (One cement and five sand ) 12mm. thick as base coat for the tiles including scaffolding, setting, curing, etc., complete complying with standard specifications as directed by the

Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting two coats using Ist quality readymix enamel paint of approved colour over new iron work including cost and conveyance and all labour charges etc.

Cost and supply of IWC.

Cost and supply of EWC.

Cost and supply of wash hand basin of size 550 x 400mm.

Cost and supply of STEEL door of size 0.75m x 1.80m including all charges etc.

Cost and supply of STEEL door of size 0.90m x 1.80m including all charges etc.

Cost and supply of STEEL door of size 1.00m x 2.10 m including all charges etc.

Cost and supply of STEEL door of size 1.20m x 2.10 m including all charges etc.

Towards the cost of RCC jolly(0.60M X 0.45M) including all charges etc.

Cost & Supply of 110 mm dia pvc pipe

Cost & Supply of 32 mm dia pvc pipe

Cost & Supply of 20mm Tap

Cost & supply of 2000 Liter Syntex Tank

Wiring with 2x1.5sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5 A F.T. switch with continuous earth wire connection of 14 SWG TC wire of making good of the concealed portion with suitable colour for PVC Concealed light point / Fan point (for electronic regulator ) SD.26

Wiring with 2x1.5sq.mm (22/0.3 PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150x100x113mm TW switch box and 5 A. 3 pin non inter locking CS Plug with painting of suitable colour with continuous earth wire connection of 14SWG TC wire for open PVC plug point SD 36

Supply and fixing of single box type 4'40W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flue tube with PVC unsheathed copper leads from terminals to the fitting (SD.88)

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (SD.70) (3 Phase)

Supply and run of 4 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains SD 67

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Krishna and Co (BID ID -1449475)