SPECIAL REPAIR REPLACEMENT OF BER SUMMER COOLING APPLIANCES AT CQA (PP) DGQA AREA SPECIAL REPAIR REPLACEMENT TO LT UNDERGROUND CABLE FEEDING G ROAD FIRE STATION INSIDE COD KANPUR AREA PROVN OF 57 X ELECT UNDER GE(I) KANPUR

Amount

Disconnecting, dismantling and taking out indoor and outdoor unit of split type AC with cooling tubing and other accessories with carefully and deposited to MES store yard complete with outer/inner unit, copper tubing, drain pipe and remote complete all as specified and directed.

Supply, installation testing & commissioning of split type air conditioner, wall mounted type, working on single phase, 240 volts, 50 Hz AC supply with cordless remote control unit, built-in air ionizer and plasma filter for better air quality with inverter technology with minimum 5 Star rating and EER 3.2 of capacity 1.5 TR with copper condenser coil including fixing of indoor and outdoor unit, necessary copper pipe connections including cutting, bending, brazing, insulation on pipe etc, PVC drain pipe, electric connection between indoor and outdoor unit with suitable size PVC insulated, multi-stranded copper cable complete all as specified and directed. Note: (i) All connected pipes shall be concealed with casing and capping and the PVC drain pipe shall be taken to ground level. The rate quoted shall include for these provisions. (ii) The said AC will be installed Existing/New Location as directed by Engr-in-charge.

Disconnecting, dismantling and taking out window AC of any capacity with accessories carefully and deposited to MES store yard complete with remote complete all as specified and directed.

Supply and fix window type room air conditioner electric driven of capacity 1.5 TR (4500 K Cal per hour) single phase 230 Volt + 10%, 50 Hz, AC supply with cordless remote control unit with copper condenser air cooled with BEE 5 star rating including required cutting of holes in walls / window / aluminium partition etc of any thickness for installation of AC etc. connection and making good the disturbed surface to match with the existing complete all as specified and directed. Note :- (i) Cutting holes in walls / window / aluminium partition etc of any thickness for installation of AC etc, connection and making good the disturbed surface to match with the existing surface after work shall be done. The unit rate quoted by contractor shall deemed to be inclusive of this aspect. (ii) Provision of angle iron stand / wall mounted platform etc for fixing / supporting the AC unit is inclusive in above rate. (iii) Contractor will submit guarantee / warranty certificate from manufacturer.

Disconnecting, dismantling and taking out Water cooler/refrigerator any type/ cap with accessories carefully and deposited to MES store yard complete with remote complete all as specified and directed.

Supply and fix refrigrator, electric driven (single phase), capacity 300 Ltrs, BEE 5 Star rated complete all as specified and directed.

Supply, installation, commissioning of Water cooler fully stainless steel, electric driven single phase having approx storage capacity of 120 litres and nominal cooling capacity 60 litres per hour, complete all as specified and directed.

Disconnecting electrically, taking down existing ceiling/exhaust fan any type and capacity with due care, dismantling blades and deposting to MES store yard with all accessories complete all as specified and directed. Note: 1. Contractor will visit the site before taking the contract. 2. T&P will be provided by the contractor for reaching any height of the bldg/ Hanger.

Supply and fixing ceiling fans with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

All as per item No 9.00 above but for ceiling fan 1400mm sweep with minimum dilivery Air 245 CFM complete all as specified and directed.

Supply and fixing of Exhaust Fan heavy duty 230 V, AC single phase of size 450 mm sweep 1400 RPM with louver shutter with fixing arrangement including grouting of nuts, bolts electric connection and writing MES no. with black synthetic enamel paint/engraving tool etc in wall complete all as specified and directed.

All as per item No 11.00 above but for exhasut fan 600mm sweep 900 RPM complete all as specified and directed.

S&F in replacement of rigid steel conduit of size 15mm dia at existing / new location as per fan colour, welded cut to pieces, treated both ends for hanging ceiling fan 1200/1400mm size incl necessary hook calmps both sides with hook, nuts bolts, rubber real etc complete all as specified and directed.

M&L for fixing of fan hook on the girder/ GI tube at existing or new location inside the hanger or buiding ,above or below of fall ceiling at any hight of CQA ( PP) controllerate complete all as specified and directed.

Disconnecting, dismantling and taking out desert cooler any type/cap with accessories carefully and deposited to MES store yard complete all as specified and directed.

Supply and fixing in replacement of deoxidized- annealed copper tube of size 8 mm outer dia (lengh 10 RM) including brazing etc. complete all as specified and directed

Supply and fixing in replacement of foamed polythene insulating pipe of 18mm internal dia and 8mm wall thickness of length (5.9 feet) complete all as specified and directed.

Supply, installation, testing, commissioning of desert cooler of fiber body , Honey Comb cooling media fully exhaust fan motor not less than 1400 RPM of copper winding and suitable capacity submersible pump & cabinet size not less than 68cmx116cmx46 cm water tank of capacity 72 Liters,1000 watts speed control electronic regulator, suitable size connection cable 3 core with copper conductor with moulded plug top, fan blade and all fixing accessories complete all as specified and as directed Note:- All electrical equipments shall be of ISI Marks.

Supply & fix in replacement cable PVC insulated flexible copper conductor cable of size 2.5 Sqmm three core cut to pieces all as required for connection with proper thimbles, drawn in existing GI/PVC pipe fixed on wall etc complete all as specified and directed.

Supply & fix in replacement cable PVC insulated flexible copper conductor cable of size 0.5 Sqmm twin core cut to pieces all as required for connection with proper thimbles, drawn in existing GI/PVC pipe fixed on wall etc complete all as specified and directed.

Dismatling/ taking down of old unsv & Supply and Lay LT cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables(heavy duty) 1100V grade with stranded aluminium conductor of size 95 Sqmm 3.5 core complete all as specified and directed.

Dismatling/ taking down of old unsv Supply, install, testing and commissioning in replacment LT cubical Panel of outdoor type factory made dust/vermin proof made out of CRCA sheet 3.15 mm thick for outer compartment and 2 mm thick inner compartment CPRI approved duly powder coated having opening and locking arrangement both in front and rear side (independent door for each item on front side) mounted on 4 Nos angle iron 50x50x6 mm, 45 cm long embedded in PCC 1:3:6 type C2 with aluminium bus bar of rating 200 Amps raded capacity, IP 65 protection, provision of holes at the bottom of panel to pass through cable with cable gland for incoming and outgoing cables with lugs and connections etc required nuts ,bolts and washer incl control wiring with suitable size PVC copper conductor cable and provn of cable lugs etc. Including provision of following accessories/eqpt incl cable gland etc and suitable for fixing of under mentioned items:-

Dismatling/ taking down of old unsv Supply, install, testing and commissioning LT cubical Panel of outdoor type factory made dust/vermin proof made out of CRCA sheet 3.15 mm thick for outer compartment & 2 mm thick inner compartment CPRI approved duly powder coated having opening and locking arrangement both in front and rear side (independent door for each item on front side) mounted on 4 Nos angle iron 50x50x6 mm, 45 cm long embedded in PCC 1:3:6 type C2 with aluminium bus bar of rating 100 Amps raded capacity, IP 65 protection, provision of holes at the bottom of panel to pass through cable with cable gland for incomming and outgoing cables with lugs and connections etc required nuts, bolts and washer incl control wiring with suitable size PVC copper conductor cable and provn of cable lugs etc. Including provision of following accessories/eqpt incl cable gland etc and suitable for fixing of under mentioned items:-

M&L for Earthing in replacement / renewal with galvanised steel earth plate electrode of size 600x600x6.0mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised strip of size 32 x 6 mm earth continuity coductor by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR-I 2009, connected to main switch board all as specified. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20 mm dia GI Pipe light grade, protection pipe of 40 mm dia GI pipe medium grade funnel with wire mesh and lugs, complete all as specified and directed.

Supply and fixing of HDPE Double wall corrugated (DWC) electric pipes of size 63 mm dia manufactured using HDPE polymer having a smooth internal surface Plain & corrugated external surface having with greater stiffness withstand soil movement & take higher loads 450N (6M) static & dynamic including connecting rings made of HDPE DWC suitable for 63 mm pipes of color (orange/black), to pass through 95 to 120 sqmm HT/ LT complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 m in depth in a soft/loose soil for laying underground cables/ errection of steel tubular poles / stay pit etc including cutting/ clearing the shrubs, grasses near excavation area complete all as specified and directed.

Returning and filling in two parts (i) using riddled soil obtained from excavated soil upto depth of 30 cm (8 cm below cable and remaining above cable for cushioning of cable and (ii) refilling the trench of remaining depth with normal excavated soil complete all as specified and directed. Note- Excavated soil shall be riddled by using sieve to separate composite particles etc as per IS - 1255-1983 and refilling in trenches as in cable cushioning.

Removing excavated surplus material to a distance n.exc 50 m and depositing where directed at alevel n exc. 1.5 m above the starting point in any type of soil complete all as specified and directed.

Dismantling/ taking down of old unsv Supply and fix in replacement distribution board iron clad, with IP-43 1K-09 protection suitable for MCCB as incomer and MCBs as outgoing 415 volts 3 phase 50 C/S VTPN DB 4 ways with appropiate size copper bus bar and neutral link, making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified and directed.

Supply and fixing in replacement MCCB 4 pole 63 amps with rupturing capacity of 16 KA 415 V complete all as specified and directed.

Supply and fixing MCB SPN 40 amps 415 V 'C' curve with rupturing capacity of 10 KA complete all as specified and directed.

Supply and fixing MCB SP 6-20 amps 415 V 'C' curve with rupturing capacity of 10 KA complete all as specified and directed.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique or by normal manual method and necessary machine/ tools upto 100 dia complete all as specified and directed.

Supply and laying RCC cable route indicator rectangular in shape providing cured shape on top, dimension not less than 250x150 mm at bottom below GL, 200x150 mm above GL & total height not less than 1250 mm fabricated in cement concrete (1:2:4) coloured yellow & mentioning cable size/ voltage & location in black colour, has to be engraved complete all as specified and directed.

Supply and fixing electric water heater, storage type made of ultra thick super cold rolled steel plates, feroglass dry powder coating technology inner tank and heating element heavy duty mag-nesium anode rod with steel core to protect enamelled tank from rust and corrosion 2 KW Capacity, 230 Volt, 1 Phase AC, 50 Hz, 25 Ltrs, BEE 5 Star, Energy saving high density PUF insulation, glass coated heating performance and resistance to oxidation and carbonation at high tempratures rated with all accessories such as safety valve, thermostat, NRV, connection piece and writing MES No. in black synthetic enamel paint/engraving tool etc complete all as specified and directed.

M&L for sub main wiring with two single core of 2.5 sqmm copper conductor FRLSH, PVC insulated and unsheathed multi-stranded cable including PVC conduit medium grade of 25 mm dia, concealed in /surface on walls for sub main connection and 2.5 sqmm FRLS, PVC insulated and unsheathed multi-stranded green colour copper conductor cable as an earth wire to common earth and connected to earth dolly complete all as specified and directed.

S&F PVC Connections 600 mm long with two nos nut adapter ISI marked complete all as specified and directed.

Supply & fixing in replacement of stop valve chromium plated alloy screwed down high pressure with crutch or butterfly handle screwed both ends for Gl pipe 15 mm dia bore complete all as specified and directed.

Supply & fixing in replacement of Bib Tap chromium plated alloy screwed down high pressure with crutch or butterfly handle screwed both ends for Gl pipe 15 mm dia bore complete all as specified and directed.

Supply, Laying, jointing and leakage testing Gi Pipe medium grade 15 mm bore including supply and fixing of all fittings such as bend, tee, elbow, union, reducer etc, laid in trenches/floor/ walls etc as specified and as directed at site of the following sizes:- Notes: (i) The laying and jointing of pipes are required to be carried out in short /long streches catering to specific requirements of a purticular quarter, building block or a group of blocks. (ii) Excavation & earth work shall be measured & paid seperately.

S&F in replacement of Modular AC Box with 20 A SP MCB 4 module Plastic enclosure & unbreakable including 20A MCB heavy duty with ISI plug top complete all as specified and directed.

M&L for point wiring for one exhaust fan/ceiling fan point controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper colour coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green colour) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size not less than 20mm dia with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size & as directed by Engr in Charge & 3 mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per item No 42.00 above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable (FRLSH) and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and incl PVC conduit complete all as specified and directed.

M&L for switch piano flush button single pole one way 5/6 amps 240 volts complete all as specified and directed.

Supply & Fix exhaust Fan steel body AC single phase 300 mm sweep with blades ,and frame and louvers complete with cavity. Including cutting of hole in walls wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

M&L for ceiling rose surface bakelite 3 terminals complete all as specified and directed.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.00, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 3742019), THD less than 10%, electronic regulator unit for speed control, Anti corrosive aluminium blades & body for longer life and all remaining accessories including safety pin, nut bolts, washers, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete all as specified. Note : (a) Make, Model & Colour of fan as approved by GE. (b) Writing MES No. in black synthetic enamel paint by the contractor.(c) T & P will be provided by the contractor for reaching any height of the ceiling.(d) D-hook hanger (Heavy duty) with M10X75 mm Fasteners for Hanging ceiling fan complete all as specified.

Supply & Fix exhaust Fan steel body AC single phase 450 mm sweep with blades ,and frame and louvers complete with cavity complete all as specified and directed.

Switch piano flush button single pole one way 15/16 amps 230 Volts complete all as specified and directed.

M&L for socket out let, 6 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts complete all as specified and directed.

Supply, installation,commis-sioning of Metal Top Deep Freezer single phase 240 volt, 50 Hz of capacity 500 ltr double door complete all as specified and directed.

Supply and fix voltage stabilizer for automatic operation , single phase naturally & designed for input variation between 170 V to 250V with output voltage stabilized at 230 V with accuracy class of + 2.5% and of capacity 2 KVA complete all as specified and directed.

Supply and fix voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of (+) 2.5% and of capacity 5.0 KVA complete all as specified and directed.

Supply, install, testing & commissioning of split type air conditioner, wall mounted type, working on single phase, 240 volts, 50 Hz AC supply with cordless remote control unit, built-in air ionizer and plasma filter for better air quality with inverter technology with minimum 5 Star rating and EER 3.2 of capacity 2 TR complete with copper condenser coil including fixing of indoor and outdoor unit, necessary copper pipe connections including cutting, bending, brazing, insulation on pipe etc, PVC drain pipe, electric connection between indoor and outdoor unit with suitable size PVC insulated, multi-stranded copper cable complete all as directed by Engineer-in-Charge. [Note: All connected pipes shall be concealed with casing and capping and the PVC drain pipe shall be taken to ground level. The rate quoted shall include for these provisions]

M&L for single pole and neutral metallic enclousere with a top pin, earth plug and socket copmlete with one SPN MCB 20 Amps, 240 Volts(modular MCB AC box) complete all as specified and directed.

M&L in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 4 sqmm with proper colour coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4.0 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed.

Bharat Sales Corporation (BID ID -3478912)

ARORA BROTHERS (BID ID -3489298)

santosh electronics (BID ID -3484221)