Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.5 LAccepted-Finance WZ 1043 C IIND FLOOR NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L1 | Accepted-Finance lowest bidder | |
| 2 | L2₹25.4 L+₹1.9 L (8.29%)Rejected-Finance FLAT NO 201 LAXMI PARK NIWAS BT KAWADE ROAD GHORPADI PUNE 411036 | PUNE | MAHARASHTRA | 411036 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹25.7 L+₹2.2 L (9.31%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹27.0 L+₹3.5 L (15.1%)Rejected-Finance GALI NO 5 6 H NO 6 275 JHARODA MAARA EXTN PART III BURARI NEW DELHI 110084 | NEW DELHI | CENTRAL DELHI | DELHI | 110084 | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹27.4 L+₹3.9 L (16.6%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | QUALITY CONSTRUCTIONS CO L4 | Ganga Enterprises L2 | M/S AADI ENTERPRISES L1 | CLAL AND SONS L3 | airstack india L5 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) and all as directed. | 45 | Each | 100 ₹4,500 Lowest | 205 ₹9,225 | 111 ₹4,995 | 110 ₹4,950 | 100 ₹4,500 Lowest |
| 2.00 | Taking down chowkhats or frames with shutters exc 1.5 sqm but n.exc 4.00Sqm each(without taking off shutters from the frame) and all as directed. | 35 | Each | 110 ₹3,850 | 235 ₹8,225 | 111 ₹3,885 | 100 ₹3,500 Lowest | 100 ₹3,500 Lowest |
| 3.00 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; side hung or barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 | 1,236 | Kg | 95 ₹1,17,420 | 58 ₹71,688 Lowest | 66 ₹81,576 | 75 ₹92,700 | 90 ₹1,11,240 |
| 4.00 | Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer. | 160 | Sqm | 50 ₹8,000 | 40 ₹6,400 | 55 ₹8,800 | 26 ₹4,160 Lowest | 34 ₹5,440 |
| 5.00 | S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples all as specified. | 16 | Sqm | 300 ₹4,800 | 230 ₹3,680 Lowest | 322 ₹5,152 | 250 ₹4,000 | 400 ₹6,400 |
| 6.00 | S&F repairs Sheet glass 4.8 mm thick, ordinary quality & glazing with oil putty in square each pane complete all as specified and directed. | 20 | Sqm | 500 ₹10,000 | 550 ₹11,000 | 555 ₹11,100 | 350 ₹7,000 Lowest | 500 ₹10,000 |
| 7.00 | "System Aluminium Factory made Double Rebate Windows with Grill and Mesh Providing and fixing of SKAB 91 Series. Double rebate windows & ventilators made of High-performance factory-made system Aluminium windows with Akzonobel powder coating of 60-70 microns (Any RAL Colour). Section for Outer frame should be of 114mm x 40mm, 1.3mm thick Glass shutter frame shall be of 54mm x 30mm, Mesh shutter frame shall be of 54mm x 30mm, 1.3mm thick 5mm thick Single Glazed beading shall be of 15mm x 18mm. 5mm thick Clear Glass shall be used in all the windows & ventilators. Stainless Steel Wire Mesh shall be used in Wire mesh Shutters. 10 mm Sq bar M.S. Grill/Guard bar with 100mm c/c shall be fixed in between glass & mesh shutter. All frame corners shall be joined/ assembled using self-locating corner cleats (No screwing at corners shall be allowed. All Hardware shall be used from a reputed brand, weather silicon shall be used for filling the gap between window opening & window Frame complete in all respect including all taxes. (Makes A2Z Infra Solutions/Lilli Windows/BWS Windows/Rayners)
Note:- Rate shall include for Glass, Wire Mesh & Guard Bras Grill)" | 65 | Sqm | 9,000 ₹5,85,000 | 10,400 ₹6,76,000 | 5,100 ₹3,31,500 Lowest | 9,999 ₹6,49,935 | 5,500 ₹3,57,500 |
| 8.00 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.
Note:- stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified. | 56 | Sqm | 3,300 ₹1,84,800 | 3,500 ₹1,96,000 | 3,500 ₹1,96,000 | 2,330 ₹1,30,480 Lowest | 2,500 ₹1,40,000 |
| 9.00 | S&F 100 mm size stainless steel butt hinges, medium weight , cold rolled, mild steel and fixed complete all as specified and directed | 60 | Each | 60 ₹3,600 | 60 ₹3,600 | 51 ₹3,060 | 25 ₹1,500 Lowest | 44 ₹2,640 |
| 10.00 | S&F Stainless steel barrel tower bolt 150mm long extruded section all as specified. | 60 | Each | 100 ₹6,000 | 50 ₹3,000 Lowest | 99 ₹5,940 | 65 ₹3,900 | 99 ₹5,940 |
Tender Value
₹36.3 L
EMD Value
₹72,600
Closing Date
8 May 2026, 6:00 pmClosed
GE North Delhi Cantt-10
GE North Delhi Cantt-10
REPAIR AND MAINTENANCE OF JOINERY ROOF TREATMENT TO JCO OR MD ACCN AT MES COLONY TIMARPUR OF AGE BRII UNDER GE NORTH DELHI CANTT10
2026_MES_759798_1
GE/North-169/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE NORTH DELHI CANTT 10
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE NORTH DELHI CANTT 10
₹72,600
Yes
6 Jul 2026
10 Apr 2026
11 May 2026
10 Apr 2026
8 May 2026
24 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) and all as directed. | - | Each | - | - |
| 2 | Taking down chowkhats or frames with shutters exc 1.5 sqm but n.exc 4.00Sqm each(without taking off shutters from the frame) and all as directed. | - | Each | - | - |
| 3 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; side hung or barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 | - | Kg | - | - |
| 4 | Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer. | - | Sqm | - | - |
| 5 | S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples all as specified. | - | Sqm | - | - |
| 6 | S&F repairs Sheet glass 4.8 mm thick, ordinary quality & glazing with oil putty in square each pane complete all as specified and directed. | - | Sqm | - | - |
| 7 | "System Aluminium Factory made Double Rebate Windows with Grill and Mesh Providing and fixing of SKAB 91 Series. Double rebate windows & ventilators made of High-performance factory-made system Aluminium windows with Akzonobel powder coating of 60-70 microns (Any RAL Colour). Section for Outer frame should be of 114mm x 40mm, 1.3mm thick Glass shutter frame shall be of 54mm x 30mm, Mesh shutter frame shall be of 54mm x 30mm, 1.3mm thick 5mm thick Single Glazed beading shall be of 15mm x 18mm. 5mm thick Clear Glass shall be used in all the windows & ventilators. Stainless Steel Wire Mesh shall be used in Wire mesh Shutters. 10 mm Sq bar M.S. Grill/Guard bar with 100mm c/c shall be fixed in between glass & mesh shutter. All frame corners shall be joined/ assembled using self-locating corner cleats (No screwing at corners shall be allowed. All Hardware shall be used from a reputed brand, weather silicon shall be used for filling the gap between window opening & window Frame complete in all respect including all taxes. (Makes A2Z Infra Solutions/Lilli Windows/BWS Windows/Rayners)
Note:- Rate shall include for Glass, Wire Mesh & Guard Bras Grill)" | - | Sqm | - | - |
| 8 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.
Note:- stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified. | - | Sqm | - | - |
| 9 | S&F 100 mm size stainless steel butt hinges, medium weight , cold rolled, mild steel and fixed complete all as specified and directed | - | Each | - | - |
| 10 | S&F Stainless steel barrel tower bolt 150mm long extruded section all as specified. | - | Each | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
Gen169.pdf
Tender Documents • 1.28 MB
BOQ_851041.xls
BOQ • 0.29 MB
amendmentboq169.pdf
PDF • 0.69 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .