WORK SERVICES FOR IMPROVEMENT TO SMQs AT SAFED SAGAR/OLD WAPTI/NEW WAPTI/OLD CAMP AT AFSSR

Amount

Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for including dismantling of floor tiles etc complete all as specified and as directed

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

Dismantling floor, hearth , stone slabs , or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc (Disturbed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Disturbed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed

Taking down shutter of any description area exc 1.00 Sqm and not exc 2 Sqm each and removing from site complete etc complete all as specified and as directed

Taking down shutter of any description area exc 1.00 Sqm and not exc 2 Sqm and refixing in same other opening after necessary easing, rescrewing and resize in same or other opening complete etc complete all as specified and as directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and as directed

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm dia bore complete all as specified and as directed

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 20 mm dia bore complete all as specified and as directed

M&L for cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed

M & L for Non Skid jointless ceramic printed scratch proof and stain resistant coloured tiles 600x600 x 9-10mm thick as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and as directed. (Screed bed shall be measured and paid separately) .

M & L for Non Skid jointless, scratch proof & stain resistance ceramic printed coloured tiles 600x600x9-10mm thick as in skirting etc , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and as directed (Screed bed shall be measured and paid separately).

M & L for Non Skid ceramic printed coloured jointless tiles 300x300x 7 to 8 mm thick , as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and as directed (Screed bed shall be measured and paid separately).

M&L machine cut and mirror polished kota stone ( size not less than 55cmx55cm for flooring & for tread of steps will be in one piece) slab flooring 18-20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror / granite polishing complete all as specified and as directed (Screed bed shall be measured and paid separately).

M&L Glazed ceramic printed coloured tiles 300mmx 450mm , 6 to 7 mm thick, as on vertical surfaces such as dado,skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, incl cutting edges etc complete all as specified and and as directed (Backing coat of cement mortar shall be measured and paid separately)

M&L machine cut and mirror polished kota stone slab 18-20 in riser of steps(in one piece ) , skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror / granite polishing complete all as specified and as directed (Backing coat of cement mortar shall be measured and paid separately)

M&L for rounding to edges of stone(granite/kota) slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed

M&L for granite (Black) stone slab 16 to 18mm thick machine cut and machine polished, in skirting, Kitchen platform /dado etc laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including pinning in brick/concrete wall to hold & support the vertical surfaces to granite work including drilling to wall complete all as specified and directed. (Screed bed shall be measured and paid separately).

M&L 75mm thick cement concerte type C1 (1:3:6) using 20mm stone aggregate as in plinth protection and paving laid in slope finished even and fair without using extra cement, laid in slope 1:12 in alternate bays system and each bay shall not exceed 3m in length, 12mm wide and 75mm deep joint shall be formed between the bays which shall be filled with plastic filling (one part of heated hot blown bitumen of 85/20 grade and two parts of sand by volume. complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and as directed

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings,shelves,chajjas incl edges and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces complete all as specified and as directed.

M&L for TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed

M&L RCC 1:1.5:3 type A1 in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves,chajjas,facia etc complete all as specified and as directed.

M&L Cutting holes n.exc 100 sqcm into or through cement concrete slabs (incl granite, kota stone etc), chajjas, etc. reinforced or otherwise etc complete all as specified and as directed.

S&F 1.25 mm thick pressed steel frame of size 165 X 60 mm for door with one or more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed

S&F 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one or more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed

M&L for cement concrete type B-0 1:2:4 (12.5 mm granded stone aggregates) in door and windows frames any size single or double rebated, as required etc complete all as specified and as directed

S&F factory made 35mm thick second class hard wood Flush shutters, solid core construction, with block board core and plywood face panels, one side laminated and one side commercial type sides complete all as specified and directed

S& F second class hard wood 35 mm thick factory made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) etc complete all as specified and as directed

S & F solid PVC door frame of size 50mm x 95mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet reinforced with MS Squre Tube in opening etc complete all as specified and as directed

S & F factory made PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded both side prelam PVC sheet instead of plain colour PVC 'C' channelled having a PVC sheet strip of 20 mm wide stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail : panelling of prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, in the frame a site as per specification and drawing etc complete all as specified and as directed

Supply and fixing mild steel cup board 60cm depth & with sides, back & 3 shelves & partition, top bottom & mild steel door shutter Godrej pattern two leaves with frame, incl necessary fittings of 18gauge MS sheet with locking arrangement and handle etc all as per Godrej Pattern with duplicate keys including necessary fittings & two coats of spray painting over a coat of red oxide zinc chromate primer complete. The frame of cupboard to be fixed to wall with 6 Nos of hold fasts of 25 x 3mm flat iron, 15cm long The cost of hold fasts & grouting them in CM (1:3) is deemed to be included in unit rates (Only front face of cupboard to be measured) complete all as specified and as directed

S&F roll formed galvanised prepainted steel section window/ventilater section of frame 72x55 mm fixed to wall or concrete surface with MS hold fast (30X5mm section) 150 mm long made, of galvanized steel powder coated and section of shutter 47x20 mm ,mulion section 72x50 mm (Base steel as per IS 513 "D" quality galvanised as per IS 277 with zinc of 120 gms/sqm.) glazed shutter and wire gauge shutter prepare to receive wire mesh to the shutter(Double door shutter) with total coated thickness of 0.6 mm including powder coated grill / guard bars made of square bars 10mm dia at 150mm c/c Horizontal spacing fixed in MS flat frame (30x5mm) fixed to windows frame with screws,incl 4 to 5 mm thick sheet glass, 0.36mm stainless steel wire cloth with 1.40mm aperture necessary fittings and all builders hardware such as handles, tower bolts & stays etc. complete all as specified and as directed type-4000 series ref drg no CEAF/STD-191/2014 SH1/2&2/2

S&F factory made PVC 5.5mm thick PVC Celuka ply one side decorative lamination and other side plain / colour complete all as directed by Engr-in-Charge.

S&F factory made PVC shutter/Shelves in required size and shape made out of 18mm thick PVC Celuka ply one side decorative lamination and other side plain/colour complete including required frame work with panels shall be fabricated using adhesive, screws and solvent cement etc where ever required all the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent complete all as directed by Engr-in-Charge.

S&F ball catcher with 8 mm dia steel ball magnet catcher for cupboard shutter including striking plate as approved etc complete all as specified and as directed

S&F continous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap (when open) 30 mm etc complete all as specified and as direced

S&F 40 mm dia. cup boards knobs fixed with nut , screw and washer of brass polished Complete all as specified and directed..

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire staple etc complete all as secified and as directed.

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed

S&F 100 mm thick stainless steel butt hinges, heavy weight, cold rolled mild steel and fixed etc complete all as specified and as directed

S&F 125 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F Double legged Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm.

S&F in repair mild steel helical door spring 150 mm long ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed

S&F in repair sinks made of stainless steel 1 mm thick for kitchen with plugs,waste pipe, washers; including bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe overall size 610mm x 460mm x 200mm complete all as specified and as directed.

S&F in repair kitchen plate rack stainless steel 1 mm thick of size 90cm x 60cm x 20cm (weight not less than 8kg)complete fixed to brick/concrete wall, with screw including rawl plug complete all as specified and as directed

S&F Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old curtain rod of any description, complete all as specified and as directed.

S&F in repair white vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed

S&F in repairs vitreous china squatting pan orissa pattern long pan size 580 mm white with cast iron ‘P’ or ‘S’ trap, front or back inlet and foot rests excluding flushing cistern & flush pipe but incl. cement concrete bedding fixed complete all as specified and as directed

S&F in repair tubular towel rail 20mm 'D' dia type brass chromium plated 600mm long between flanges complete all as specified and as directed

S&F, in repair Brass CP mixer (WHB MIXER) for mixing hot & cold water screwed down for iron pipe and fixed all as specified and as directed

S&F, in repair Brass CP mixer (SINK MIXER) for mixing hot & cold water screwed down for iron pipe and fixed all as specified and as directed

S&F, in repair Brass CP mixer (WALL MIXER) for mixing hot & cold water screwed down for iron pipe and fixed all as specified and as directed

S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe & fixing of chain & pull or lever if including PVC pipe etc complete all as specified and as directed

S&F in repair bib tap fancy type long body cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule for 15 mm dia bore pipe complete all as specified and as directed

S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions for 15 mm dia bore pipe complete all as specified and as directed

S&F in repair PVC connection of 45 cm length including brass nuts complete all as specified and as directed

Dismantling of existing tank of capacity exc 250 ltr but not exc 500 ltr,water tanks etc complete all as specified and as directed

S&F rotational moulded polyethylene water storage tanks IS :12701-1996 marked (cylindrical vertical with close top) of 500 ltr capacity with an including 20mm ball brass valve, high pressure, with polythene float and flynut complet and flynut screwed for iron pipe or brass and fixed etc complete all as specified and as directed

Re-fxing 15mm bore of old steel tubing and connection in new or old position (walls, ceiling, floor) etc complete all as specified and as directed

Re-fxing 20mm bore of old steel tubing and connection in new or old position (walls, ceiling, floor) etc complete all as specified and as directed

S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore complete all as specified and as directed

S&F medium grade galvanized steel water tubing ISI marked, with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) concealled/surfaced complete all as specified and as directed. Note :- The Rate for cutting and cheses including making good to facings for concealed water tubing deemed to be included in quoted rates.

S&F tubes medium grade galvanized with all fittings & fixed concealled/surfaced complete to walls & ceiling or laid in floors 20 mm dia bore pipe ISI marked, (including in short length) complete all as specified and as directed. Note :- The Rate for cutting and cheses including making good to facings for concealed water tubing deemed to be included in quoted rates.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts in patches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:4) in two layers (10mm thick backing coat and 5mm thick top coat) on fair faces of brick work or concrete surface finished even and fair mixed with water proofing compound in top layers as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

M&L for Washed stone girth plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 Coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per sqm, top layer 15mm cement plaster WITH SILVER COLOUR CEMENT 1:1/2 : 2 ( 1 Silver Cement : 1/2 coarse sand : 2 Marble stone chipping 10mm nominal size) inpanels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the marble stone chippings complete all as specified, The groove shall be 15mm wide and 15mm deep in the top layer of washed stone girt plaster as per approved pattern using wooden battens, nailed to the under layer including removal to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specification and direction of the Engineer-in-Charge. Note:- Area includes G+3 building, necessary scaffolding and arrengments are deemed to be included in the quoted rates.

M&L for rendering 30 mm thick in two coats as 10mm thick in CM (1:3) with WPC RCC Chajja / Facia / slab projection, over 20mm thick in CM 1:4 as dubbing coat after applying a coat of anticorrosion chemical coating upon exposed reinforcement etc complete all as specified and as directed. Note:- Area includes G+3 building, necessary scaffolding and arrengments are deemed to be included in the quoted rates.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for two coats of white wash on ceiling on old plastered surfaces including preparation of surfaces complete all as specified and as directed

M&L for three coats of white wash on ceiling on new plastered surfaces including preparation of surfaces complete all as specified and as directed

M&L for preparing newly plastered surfaces of Walls or old plastered wall surfaces and applying Two Coats of acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for preparing old plastered surfaces of Walls and applying One Coat of acrylic Weather Coat Exterior Paint complete all as specified and as directed.

M&L for preparing newly plastered surfaces of Walls or old plastered wall surfaces and applying Two Coats of Cement based paint, complete all as specified and as directed.

M&L for complete removal of existing treatment of wall surfaces by Washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and as directed.

M&L for preparing plastered surface with 1.5mm thick wall care putty over plastered surface complete as specified and directed

M&L for applying two coat of oil bound distemper white or any tint over a coat of primer etc) on newly prepared surface / old completely removed exisitng treatment complete as specified and directed

M&L preparing new wooden surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed

M&L preparing of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

M&L for preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:3) mixed with water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement in sunken portion of toilet etc complete all as specified and as directed Note: WPC will be measured and paid separtely

M&L for two coat of painting with Dr Fixit fast Flex (or equivalent) water proofing liquid including preparation of new plastered surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for cement concrete 1:5:10 type E-2 using 20mm granded crushed Brick aggregates as in sunken portion of WC etc complete all as specified and as directed

S&F 40 mm dia bore pipe as in spouts pipes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors (including in short length) as in spout pipes etc complete all as specified and as directed

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and directed by Engineer-In-Charge

Taking down PVC/cast iron pipes of any bore including fittings of any dia with cement or lead joint fixed to walls or laid in trenches complete for refixing or replacement complete all as specified and directed by Engineer-in-Charge.

S&F in repair 75 mm bore cast (spum) iron waste & vent pipe epoxy coated inside & out side and laid in trenches or in floors complete all as specified and directed by Eng-in-Charge.

S&F in repair 75 mm bore cast (spum) iron waste & vent pipe epoxy coated inside & out side and fixed to wall vertically complete all as specified and directed by Eng-in-Charge.

S&F in repair 100 mm bore cast (spum) iron waste & vent pipe epoxy coated inside & out side and laid in trenches or in floors complete all as specified and directed by Eng-in-Charge.

S&F in repair 100 mm bore cast (spum) iron waste & vent pipe epoxy coated inside & out side and fixed to wall vertically complete all as specified and directed by Eng-in-Charge.

S&F in repair for 50 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors or fixed to wall vertically

S&F in repair 50 mm cast iron cowls complete all as specified and as directed

S&F in repair for 75 mm bore out let floor trap of cast iron with stainless steel gratings including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and as directed.

S&F in repair for 75mm bore out let Nahani trap of Cast iron with stainless steel grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as specified and as directed.complete all as specified and as directed.

S&F 75 mm bore shielded coupling for Hubless centrifugally cast (spum) iron pipe SS 304 Grade coupling with EPDM rubber gasket complete all as specified and directed by Eng-in-Charge.

S&F in repair 75 mm cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed

S&F in repair 75 mm bore cast (spum) iron bend of required degree with epoxy coated inside & out side complete all as specified and directed by Eng-in-Charge.

S&F in repair 75 mm bore centrifugally cast (spum) iron tee with access door of required degree with epoxy coated inside & out side complete all as specified and directed by Eng-in-Charge.

S&F in repair 100 mm cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed

S&F in repair 100 mm cast iron Sockets (double, collars) complete all as specified and as directed

S&F in repair 100 mm bore centrifugally cast (spum) iron bend of required degree with epoxy coated inside & out side complete all as specified and directed by Eng-in-Charge.

S&F in repair 100 mm bore centrifugally cast (spum) iron tee of required degree with access door epoxy coated inside & out side complete all as specified and directed by Eng-in-Charge.

S&F 100 mm bore shielded coupling for Hubless centrifugally cast (spum) iron pipe SS304 Grade coupling with EPDM rubber gasket complete all as specified and directed by Eng-in-Charge.

S&F Brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Eng-in-Charge.

M&L for mild steel framed work as in grills, grating, doors, etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors, ladders framed balusters walk ways, railing framed work of water tanks and similar work etc complete all as specified and as directed

Dismantling Brick tiles or terracing tiles, single layer on roofs etc complete all as specified and as directed

Demolition Mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only or part thereof)

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, roof padding/staging of water tank etc including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface. Notes :- Rates includes to carried out the work on roof slab of G+3 building nothing extra shall be admissible on this account

M&L APP based polymeric modifed prefabricated membrane minimum weighing 3.6 kg/sqm and minimum 3mm thick reinforced with polyester non woven matt fabric 170 gsm with 15 cm longitudinal & horizontal over lapping and joints finally pasted with thermo- fused with butane torch laid over a coat over bituminous primer 0.30 ltr per sqm as per APP manufacturer instructions etc complete all as specified and as directed

M&L Cement concrete tiles 25cm x 25xm x22mm thick, machine pressed; set, jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement and no pigment on roof over and including 15 mm thick 1:4 cement screed complete all as specified and as directed

M&L for ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron , plinth protection , concrete surface etc complete all as spd and directed.

M&L for ATT Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors etc complete all as spd and directed.

M&L for gunniting to RCC works in column beams, slabs, chajja, facia, landing, balconies etc by removing/ dismantling of RCC (loose concrete) and cutting of steel bar including plaster cleaning of surfaces with wire brushes and applying epoxy, paint anti corrosive coating of minimum 40-50 microns thick with sikatop Armatec 108 or Colusal VL of MC Bauchemie to rusted steel reinforcement after removing cleaning all rust and supply and fixing welded steel wire mesh 75mm x75mm with 4mm dia steel wire as facias/drops and similar works etc and expoxy based or other equivalent suitable bonding agent treatment to be carried out on old concrete surface with Sikadur 32 of Sikka. Nito bond EP of fosroc or equivalent (as per manufacturers instruction) to bond old and new concrete mixing @ 2% by weight of cement polycrete and providing gunniting with a minimum pressure of 2 to 2.5 Kg per Sqm and applying 35mm thick gunniting in cement mortar (1:2) (one part of cement and two part of ghaghar sand) using ordinary port land cement of 43 grade over wherever required, complete all as specified and directed by Engineer-in-Charge. Note: The following are inculed in qouted rates. upto :- -(i) After placing the additional reinforcement all concrete surface shall be thoroughly scrubbing with. (ii) Additional reinforced TMT bars where incorporated in work and including 20mm thick cement plaster in 1:4 (iii) Work to be carried out as in patches as directed by Engr-in-charge. (iv) All demolished material removed from MOD land completely. (v) The work to be executed in G+3 Bldgs. Necessary scafolding, form work arrengement deemed to be included in unit rate. (vi) All the above parameters deemed to be included in unit rate.

S&F 75mm bore PVC(SWR) pipes single socketed Pressure rating @6Kg/Sq cm medium grade in any length with rubber ring joint, fixed to walls (using MS clamp at every 2mtr) length including taking down eaves, gutters rain water pipes (any size or pattern) including all fittings complete all as specified and directed by Engineer-in-charge. Notes : The Area includes in this items to working in shaft portion upto 6th storied building.

S & F 75 mm bore PVC (SWR) bends with access door any radius complete all as specified and directed

S & F 75 mm bore PVC (SWR) Tee / Y (branch Piece Equal / unequal) any radius with access door complete all as specified and directed

Removing building materials etc. to a distance of 5km or above, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as spd and directed

M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of path/hardstanding etc complete all as specified and as directed

M&L for Chequered cement concrete coloured tiles 30cm x30cm x 22 to 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking into credit and making good disturbed surfaces of walls, floors etc all as directed.

M&L for point wiring complete with 1.5 Sqmm (Nominal area), single core, PVC insulated unsheathed FRLSH cable 1100 volts grade multi stranded copper conducter confirming to IS 732 (1989) drawn through and including non metallic rigid PVC conduit and accessories in surface of walls / ceiling/ concealed in wall including single core multi stranded copper conductor 1.5Sqmm dia PVC insulated unsheathed cable as earth continuity connected to common earth dolly, drawn in same concealed conduit including 1.22mm thick pressed steel terminal boxes and 3mm thick laminated sheet cover to house switch / regulators etc complete for one light point /bell point / Fan point controlled by one switch with cable 1.5 Sqmm size complete all as specified and as directed. Note :- The Rate for cutting and cheses including making good to facings for concealed wiring deemed to be included in quoted rates.

All as per item No 132 above but for one llight point controlled by two, two way 6 Amps switch. with cable 1.5 Sqmm size complete all as specified and as directed.

All as per item No 132 above but for one 5 pin socket outlet 5/6 Amps on Same board including single core stranded copper conductor 1.5 sqmm PVC insulated and unsheathed cable drawn in same conduit as earth wire to the common earth and connecting to earth doily complete all as specified and as directed.

All as per item No 132 above but for one 5 pin socket outlet 5/6 Amps on independent board including single core stranded copper conductor 1.5 sqmm PVC insulated and unsheathed cable drawn in same conduit as earth wire to the common earth and connecting to earth doily complete all as specified and as directed.

All as per item No 132 above but for one 5 pin socket outlet 15 Amps on independent board including single core stranded copper conductor 2.5 sqmm PVC insulated and unsheathed cable drawn in same conduit as earth wire 2.5 Sqmm to the common earth and connecting to earth doily complete all as specified and as directed.

All as per item No 132 above but for one 5 pin socket outlet 15/16 Amps on independent board including single core stranded copper conductor 4 sqmm PVC insulated and unsheathed cable drawn in same conduit as earth wire 4 Sqmm to the common earth and connecting to earth doily complete all as specified and as directed.

Supply and fix switch piano type one way 6 Amps flush type ,240 volt AC complete all as specified and directed.

Supply and fix switch piano type one way 16 Amps flush type ,240 volt AC complete all as specified and directed.

Supply and fix socket 2 in 1, 3/5 pin, 16 Amps flush type ,240volt AC complete all as specified and directed.

Supply and fix socket 2 in 1, 3/5 pin, 5 Amps flush type ,240volt AC complete all as specified and directed.

Supply and fix switch piano type two way 6 Amps flush type ,240volt AC complete all as specified and as directed.

S & F stepped type electronic fan regulator two modules BLDC support or as per requirement of site, flush type on the existing phenolic laminated sheet complete all as specified and as directed.

Supply and Bell push, 6 Amp flush type, 240volt AC complete all as specified and as directed.

Refixing only existing LED Tube Light fittings with new flexible copper twisted twin core cable complete all as specified and as directed.

Refixing only existing energy meter complet all as specified and as directed.

Supply and fix ceiling rose surface bakelite with three terminals complete including taking down rusted metal box and necessary plastering work and finish with existing wall paint complete all as specified and directed

Supply & Fix Double pole sheet matal enclosure box with a two pin and earth plug and socket complete with singal pole MCB 20 Amps and including taking down complete all as specified and directed.

Supply & Fix wall mounted extruded aluminium housing high quality indoor batten LED tube 20 watt (4ft long) colour temperature 6500 K (4" long) lumen 2000 -3000, PF> 0.9, THD less 15% diffused connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement and including taking down complet all as specified and directed.

Supply & Fix wall mounted extruded aluminium housing high quality indoor batten LED tube 10 watt (2 ft long) colour temperature 6500 K (2" long) lumen 2000 -3000, PF> 0.9, THD less 15% diffused connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement and including taking down complet all as specified and directed.

Supply and fix electric bell Ding Dong, AC 230 volts and including taking down all as specified and directed

Refixing of electric water heater storage type 25 ltr capacity with new connecting wire complete all as specified and directed

S & F sheet metal enclosures for double door distribution board factory made duly painted 8 way SPN 240 Volts with 200 amps rated bus bar , suitable for fixing MCB /Isolators and including taking down complet all as specified and directed.

Supply and fixing miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP240V, 10 KA 'C' curve , in the MCB DB Complete with connection testing and commissioning and including taking down complet all as specified and directed..

Supply and fixing miniature circuit breaker (MCB) of SPN and current carrying capacity 40 Amps 240V, 10 KA 'C' curve , in the MCB DB Complete with connection testing and commissioning and including taking down complet all as specified and directed.

Supply and fixing MCCB 100 Amps, TPN, Breaking capacity 16 KA, 415 V 'C' curve adjustable type including taking down old one complete all as specified.

Supply and fixing MCCB 125 Amps, TPN, Breaking capacity 16 KA, 415 V 'C' curve adjustable type including taking down old one complete all as specified.

S&F submain wiring with sheathed multi-stranded FRLSH Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 4 Sqmm single core and one runs of 4 Sqmm PVC insulated copper conductor FRLSH grade for earth continuity wire between main DB to Sub main DB complete all as specified and as directed. Note :- (i).One run of 3 x 4Sqm cable for phases & earth wire and 1 run of 25mm dia PVC conduit shall be paid as one unit. (ii): Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

S&F submain wiring with sheathed multi-stranded FRLSH Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 6 Sqmm single core and one runs of 6 Sqmm PVC insulated copper conductor FRLSH grade for earth continuity wire between main DB to Sub main DB complete all as specified and as directed. Note :- (i).One run of 3 x 6Sqm cable for phases & earth wire and 1 run of 25mm dia PVC conduit shall be paid as one unit. (ii): Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

M & L for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvansihed earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and 20mm bore medium grade protection pipe of GI upto 7.5 m length including charcoal black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as shown in electrical plate No 3 as specified, GI wire size of 4.0 mm and length for continuity earth wire from test point to main distribution Board including testing on completion and taking down old earthing materials complete all as specified. (Note: (i) Rate for achieving required depth by compressor machine if required is deemed included in item unit rate. (ii) After earthing contractor should test the earth value and submit register for earth resistance result to Engr-in-Charge. )

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 Volts grade aluminum conductor of size 3.5 core 70 sqmm earthed and old u/s cable deposit in MES store complete all as specified and directed.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 Volts grade aluminum conductor of size 3.5 core 50 sqmm eathed and taking out old u/s cable complete all as specified and directed.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 Volts grade aluminum conductor of size 3.5 core 35 sqmm earthed and taking out old u/s cable complete all as specified and directed.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 Volts grade aluminum conductor of size 3.5 core 25 sqmm earthed and taking out old u/s cable complete all as specified and directed.

M & L for earthing complete with galvansihed steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 25 X 4 galvansihed iron strip earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and 32 mm bore GI pipe medium grade as protection pipe upto 7.5 m length including charcoal black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as shown in electrical plate No 3 as specified, iron strip and length for continuity earth wire from test point to main distribution Board including testing on completion and taking down old earthing materials complete all as specified. (Note: (i) Rate for achieving required depth by compressor machine if required is deemed included in item unit rate. (ii) After earthing contractor should test the earth value and submit register for earth resistance result to Engr-in-Charge. )

Excavation in trenches n.exc 1.50 m wide and not exc 1.5 m depth for foundation etc or for lying cable etc n exc 10 sqm on plan nd n 1.5 m depth and getting out in soft/loose soil complete all as specified and directed by engineer-in-Charge.

Returing, filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soil all as specified and directed.

Removing excavated soil not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point.complete all as specified and directed.

M& L for dry river sand in trenches including spreading for cushioning of LT UG Cable complete all as specified. (Punned thickness shall be measured).

M & L for sub class 'B' bricks old size laid flat dry in trenches over cable,across the direction of cable complete all as specified.

M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as directed.

India Guniting Corporation (BID ID -3152241)

Adhunik Builders (BID ID -3151832)

Siya constructions (BID ID -3151211)

JYOTI ENTERPRISES (BID ID -3151614)

M/s Kohli Builders (BID ID -3150351)

Elite Builders (BID ID -3150065)

M/s Arihant Builders (BID ID -3152214)

M/S Sunil Steel Works (BID ID -3151967)

P K CONSTRUCTION CO. (BID ID -3152309)

L G BUILDERS (BID ID -3151819)

MASTER CONSTRUCTION CO (BID ID -3151445)