Interior and Renovation Works at Sahitya Akademi, Rabindra Bhawan, 35, Ferozeshah Road, New Delhi

S NO DESCRIPTION AMOUNT AMOUNT AMOUNT

DSR NON DSR DSR+NDSR

1 CIVIL, INTERIOR & PLUMBING WORKS 79,27,167.01 1,17,73,380.50 1,97,00,547.51

3 ELECTRICAL, LIGHT FIXTURES & HVAC WORKS 46,63,190.00 16,98,938.00 63,62,128.00

5 AV-CONFERENCE ROOM (3RD FlOOR) 1,21,76,179.00 1,21,76,179.00

6 AV-CONFERENCE ROOM (2ND FlOOR) 11,30,600.00 11,30,600.00

7 AV-PRESIDENT ROOM, SECRETARY ROOM & CABIN X 4 18,93,953.00 18,93,953.00

Digitally signed by MANISH

SCHEDULE OF QUANTITIES - CIVIL, INTERIOR, PLUMBING WORKS

S NO DSR/MR DESCRIPTION

QUANTITY UNIT RATE AMOUNT AMOUNT

DSR RATE NON DSR

Civil & Interior work

4.13 CEMENT CONCRETE: Providing and laying in position CEMENT CONCRETE of specified grade exluding

1 the cost of centring and shuttering-all work upto 6th floor

4.1.3 1: 2: 4 (1 Cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) 10.00 Cum 7878.50 78,785.00

5.1 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of

2 centering, shuttering, finishing and reinforcement

5.1.1 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20

mm nominal size derived from natural sources) 12.00 Cum 9045.75 1,08,549.00

3 5.9 Centering and shuttering including strutting, propping etc. and removal of form for

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers

5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding

all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated (Corrosion resistant) bars of grade Fe-500D or more as per IS : 1786. 700.00 Kg 107.85 75,495.00

6.13 Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super

structure above plinth upto floor V level.

6.13.2 Cement mortar 1:4 (1 cement : 4 coarse sand). 50.00 Sqm 1123.80 56,190.00

6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick

8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut

for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved

shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints

treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high gloss finish etc. complete at all levels.

8.2.2.2 Granite stone slab colour black, Cherry/Ruby red 80.00 Sqm 5136.30 4,10,904.00

8.3 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to

8 edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge

8.4 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width

upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete

8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity

10 counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. 2.00 Each 978.70 1,957.40

including moulding, rubbing and polishing of cut edges etc. complete.

8.11 Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work)

including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of

different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand)

11 laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed -

with pigment of matching shade, including rubbing, curing, polishing

etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.

8.11.1 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. 50.00 Sqm 10414.80 5,20,740.00

Digitally signed by MANISH

8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified

by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any

12 size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of 45.00 Sqm 1267.95 57,057.75

cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment of matching shade complete.

13 MR Providing and fixing 75 mm high Aluminium Skirting fabricated from extruded Aluminium Alloy Grade 6063-

T5/T6 sections of minimum 1.30 mm to 1.50 mm thickness, with minimum 15 micron anodized natural/silver

finish, fixed to wall with concealed screw fixing/clipping system to provide a seamless appearance. The

skirting shall consist of extruded aluminium profile complete with concealed aluminium/PVC fixing clips,

matching aluminium end caps, internal and external corner pieces, joining clips, rubber/PVC gasket, 152.00 metre 690.00 1,04,880.00

approved fasteners, screws, nylon plugs, adhesive wherever required, including cutting, drilling, notching,

making good the wall surface after fixing and all labour, materials, tools, tackles, scaffolding and incidental

charges required for complete installation as per manufacturer's specifications and as directed by the

Engineer-in-Charge.

14 11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer)

with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all

colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey

cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The

tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch

trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the

tiles gently and easily:

a 11.41A.1.3 Double charge vitrified tile polished finish of size: Size of Tile 600 x 1200 mm 95.00 sqm 1577.15 1,49,829.25

b 11.41A.3.1 Glazed Vitrified tiles Matt/Antiskid finish of size: Size of Tile 600 x 600 mm 35.00 sqm 1464.85 51,269.75

15 11.48.4 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic

coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting 110.00 sqm 174.5 19,195.00

and finishing complete as per direction of Engineer-in-charge. Size of Tile.

16 MR Providing and laying modular Carpet Tile flooring of approved make, comprising Type-6 Solution Dyed

Nylon loop pile carpet tiles/planks, having gauge 1/10" to 1/12", stitch density 10–13 stitches per inch, pile

height 2.0–3.0 mm, average pile density not less than 4500 oz/cu. yd., total thickness 5.5–6.0 mm, heavy

commercial grade suitable for office use, anti-static, stain resistant, soil resistant, with Class-1 fire

performance, Bfl-s1 or equivalent fire rating, having PVC/bitumen reinforced backing with dimensional 195.00 sqm 2980.00 5,81,100.00

stability.The work shall include: Surface preparation and cleaning, Supply and application of manufacturer-

approved pressure-sensitive acrylic adhesive, Laying carpet tiles in approved pattern including cutting

around columns, edges and service, Providing matching transition strips and edge trims wherever require,

Complete in all respects as per Engineer-in-Charge's directions.

17 MR Providing and fixing Premium Engineered Wooden Flooring of approved make having 15–16 mm overall

thickness comprising minimum 4 mm thick selected hardwood veneer wear layer, multi-layer cross-

laminated hardwood/birch plywood core for superior dimensional stability, balancing backing layer, all

manufactured from FSC/PEFC certified timber.The flooring shall be factory finished with minimum 7-layer

UV-cured aluminium oxide coating, highly resistant to abrasion, scratches, stains and impact, suitable for

heavy commercial traffic (Class 33/AC5 or better), with precision click-lock system and micro-bevelled

edges.The flooring shall be laid over 2–3 mm premium IXPE acoustic underlay with integrated 180 Sqm 8779.00 15,80,220.00

moisture/vapour barrier, complete with matching veneered hardwood skirting of 75–100 mm height,

reducers, T-profiles, end trims, stair nosing (where required), expansion gap treatment, thresholds,

transition profiles, manufacturer-approved accessories, cutting and fitting around columns and services,

complete with all labour, tools, tackles, consumables, wastage and cleaning, in accordance with the

manufacturer's specifications and as directed by the Engineer-in-Charge.

Digitally signed by MANISH

18 11.4 IPS FLOORING: 52mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm

thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and

top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone

aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as

per manufacturer's specifications. This includes cost of cement slurry,

but excluding the cost of nosing of steps etc. complete.

19 11.56 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as

curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab

over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with

cement slurry and pointing with white cement slurry admixed with pigment of matching shade including

rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

11.56.1 Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent 10.00 Sqm 4481.30 44,813.00

20 11.52 Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple

geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours,

shades and finished surface texture etc., in linear portions of the building, all complete as per the

architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar -

1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing

with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and

polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

11.52.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc. 154.22 Sqm 6927.35 10,68,358.78

Digitally signed by MANISH

21 11.54 Providing and fixing removable raised/false access flooring with system and its components

of approved make for different plenum height with possible height adjustment upto 50 mm,

comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame

work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and

as directed by Engineer-in-charge consisting of:

Providing at required spacing to form modular framework, pedestals made out of GI

tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I.

Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal

head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter

with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the

pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through

base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm

thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded

screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer

assembly shall receive the floor

panel, this system shall provide adequate solid, rigid support for access floor panel, the

system shall provide a minimum clear uninterrupted clearance between the bottom of the

floor for electrical conduits and wiring etc. all complete as per the architectural drawings,

as specified and as directed by the Engineer-in-charge.

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel

anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall

be steel welded construction with an enclosed bottom pan with uniform pattern of 64

hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom

0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along

each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and

cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland

cementitious core mixed with lightweight foaming compound. The access floor shall be

factory finished with Anti-static High Pressure laminate with Non Warp technology upto

1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to

withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse

11.54.1 in the

300 mmcentre of theFloor

Finished panelHeight

is placed on four steel blocks. The panel will withstand 50.00 Sqm 5623.95 2,81,197.50

FALSE CEILING WORKS -

Digitally signed by MANISH

GYPSUM BOARD CEILING: Providing and fixing false ceiling at all height including providing and fixing of

frame work made of special sections, power pressed from

M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm

centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia

bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts

of required size and other end of angle hanger fixed with intermediate

G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm,

at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with

21 12.45 connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing -

perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of

ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @

230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of

dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered

and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing

compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer's specification and also including the cost of making openings for light

fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as

per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with

12.45.1 12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS

certification marks)

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false

ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking

metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side)

consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made

from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm

made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre

to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33

mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size

600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of

22 12.53 size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre 150.00 sq m 5806.76 8,71,014.00

to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges

calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services

like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be

suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and

50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8

mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall

be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by

Engineer-in-Charge.

Digitally signed by MANISH

BAFFLE CEILING : Providing and fixing Metal Baffle Ceiling System comprising U-shaped panels of size

50 mm (W) × 100 mm (D) manufactured from 0.50 mm thick pre-coated galvanized steel, polyester powder

coated in approved RAL colour with minimum coating thickness of 60 microns. The baffle panels shall be of

lengths up to 4000 mm and mounted at 150 mm centre-to-centre spacing on specially roll-formed 0.80 mm

thick galvanized steel carriers of size 20 mm × 40 mm, factory powder coated, with integral cut-outs at 50

23 MR mm module. The carrier system shall be suspended from the structural soffit using 6 mm dia galvanized 60.00 Sqm 7052.00 4,23,120.00

steel hanger rods, adjustable suspension clips, ceiling brackets/J-hooks, nylon inserts and all necessary

fixing accessories at maximum 1200 mm c/c. The work shall include factory cutting, top caps, end caps,

side caps, alignment, levelling, cutting around services, complete installation, testing, cleaning and all

labour, materials, tools, tackles and accessories as per manufacturer's specifications and directions of the

Engineer-in-Charge.

Providing and fixing veneer finished false ceiling comprising framework of GI channels conforming to

CPWD specifications, overlaid with 12 mm thick BWP plywood or HDHMR board, finished with 0.6 mm thick

natural wood veneer of approved species and shade, including adhesive, edge lipping, cutting, grooves (if

24 MR required),excluding polish necessary suspension system, complete with all fixtures, fittings, labour, tools, 65.00 Sqm 5469.00 3,55,485.00

tackles and accessories, as per approved drawings and directions of the Engineer-in-Charge.

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade

texture with following process in the sequence as detailed below:1. The surface to be polished is rubbed

with sand paper 80/120 no. and

then with sand paper of 160/180 nos.2. Applying two coats of sealer with spray gun and allowing sufficient

drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet

rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the

surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to

25 13.116 fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light 75.00 Sqm 3049.85 2,28,738.75

wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is

applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st

coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further

allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using

melamine clear polish and melamine thinner mixed in required proportion complete as per direction of

Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

WALL FINISHES WORKS -

GLASS PARTITION Providing and fixing Single Glazed Modular Aluminium Partition System (SG-50)

consisting of 20 × 75 × 2.0 mm extruded aluminium sections manufactured from Aluminium Alloy 6063-

T5/T6, anodized with minimum 15–20 micron natural finish. The partition shall comprise floor, ceiling and

wall profiles having 20 mm visible face and 50 mm overall width, complete with glass-to-glass aluminium

connectors, T-joints, 90° corner joints, glazing beads, thermoplastic/EPDM gaskets, packers, fixing

25 MR brackets, fasteners, silicone sealant and all accessories. The partition shall be glazed with 10 mm thick clear 13.00 Sqm 8203.00 1,06,639.00

toughened safety glass conforming to IS 2553 (Part-1) and IS 2553 (Part-2), securely fixed with approved

thermoplastic/EPDM gaskets and structural silicone to provide an airtight assembly. The work shall include

cutting, drilling, alignment, levelling, fixing to floor, wall and ceiling, all hardware, labour, tools, tackles and

incidental works complete as per the approved drawings and directions of the Engineer-in-Charge.

Digitally signed by MANISH

Wooden Partition: Providing and fixing full-height modular wooden partition comprising a framework of 50

× 50 × 1.5 mm thick aluminium square hollow sections fixed rigidly to floor, wall and structural soffit with

suitable brackets, anchor fasteners and necessary supports. The framework shall be clad on both sides with

12 mm thick HDHMR (High Density High Moisture Resistant) boards conforming to IS standards. The

exposed surfaces shall be finished with 1.0 mm thick decorative laminate of approved colour, shade and

texture, fixed with approved adhesive, while all exposed edges shall be finished with 2 mm thick PVC edge

banding. The internal faces and concealed surfaces shall be finished with balancing laminate/backing

laminate as recommended by the manufacturer.

The work shall include all intermediate members, cutting, edge finishing, grooves (where required),

aluminium angle/trims, sealants, screws, hardware, complete fixing above the false ceiling up to the

structural support, and all labour, tools, tackles and accessories required for a complete installation as per

approved drawings and directions of the Engineer-in-Charge.

Wooden Panelling: Providing and fixing wooden wall panelling comprising a framework of 50 × 25 × 1.5

mm thick aluminium square hollow sections securely fixed to wall/structural members with approved

fasteners at required spacing. The framework shall be clad with 12 mm thick HDHMR (High Density High

Moisture Resistant) board conforming to IS standards, fixed with self-drilling screws and approved adhesive.

The exposed face shall be finished with 1.0 mm thick decorative laminate of approved colour, shade and

27 MR texture, while all exposed edges shall be finished with 2 mm thick PVC edge banding matching the laminate. 400 Sqm 4260.00 17,04,000.00

The work shall include aluminium framework, intermediate supports, grooves (where required), cutting, edge

finishing, sealants, screws, adhesive, hardware, complete fixing above the false ceiling up to the MS

structural framework/support, and all labour, tools, tackles and accessories complete as per approved

drawings and directions of the Engineer-in-Charge.

Providing and fixing decorative WPC Louver Panelling comprising 12 mm thick extruded Wood Plastic

Composite (WPC) louver panels of approved profile, colour and texture, fixed over the existing wooden

panelling/wall surface using approved polymer adhesive and mechanical fasteners wherever required. The

28 MR work shall include all necessary aluminium/PVC corner profiles, end trims, joining profiles, edge finishing, 50 Sqm 4461.00 2,23,050.00

cutting to required sizes, making openings for electrical fixtures, complete fixing accessories, sealants,

labour, tools, tackles and consumables, complete as per approved drawings, manufacturer's specifications

and directions of the Engineer-in-Charge.

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for

29 8.28.1 plain lining / cladding with necessary screws,including priming coat on unexposed surface with : Decorative 295.00 SQM 1946.25 5,74,143.75

veneer facings of approved manufacture

LACQUERED GLASS: Providing and fixing 6 mm thick premium lacquered glass wall cladding comprising

6 mm thick annealed lacquered float glass (Saint-Gobain SGG Planilaque Evolution or equivalent approved)

of approved colour and shade, manufactured by industrial curtain-coating process with PU lacquer on the

rear face. The glass shall be fixed over 12 mm thick BWP marine plywood/HDHMR board/MDF securely

anchored to RCC wall or supporting framework, using manufacturer-approved neutral cure structural

30 MR silicone and heavy-duty double-sided adhesive tape. The work shall include cutting, edge finishing, 55.00 SQM 5598.00 3,07,890.00

polishing, necessary spacers, joints, sealants, all fixing accessories, making cut-outs for switch boxes and

services, cleaning and protection, complete as per approved drawings, manufacturer's specifications and

directions of the Engineer-in-Charge.

The lacquered glass shall possess colour consistency, humidity resistance, scratch resistance and

environmental characteristics equivalent to Saint-Gobain Planilaque Evolution or approved equivalent.

LAMINATE PANELLING: Providing & Fixing decorative high pressure laminated sheet of plain / wood

grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive

31 9.127 bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved -

Digitally signed by MANISH

Providing and fixing decorative HDHMR mouldings of approved profile and design, manufactured from 12

mm thick HDHMR (High Density High Moisture Resistant) board, machine-cut/CNC-routed to the required

profile, fixed over existing wooden panelling, wooden partitions, doors, columns or other substrates using

approved adhesive and concealed fasteners. The mouldings shall be finished with approved primer, putty,

32 MR sanding and high-gloss/satin Duco paint finish (minimum three coats over suitable primer) in approved

colour and shade. The work shall include cutting, mitred joints, edge finishing, filling, rubbing, touch-up

painting, all necessary adhesives, screws, sealants, labour, tools, tackles and accessories complete as per

approved drawings and the directions of the Engineer-in-Charge.

33 9.1 WOODEN DOOR FRAMES: Providing wood work in frames of doors, windows, clerestory windows and

other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia -

& length (hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood 1.50 CUM 142949.70 2,14,424.55

8.27 Wooden battens for extra support in partition and panelling where ever required. -

8.27.1 Kiln seasoned and chemically treated hollock wood 0.2 CUM 187277.65 37,455.53

Providing and fixing factory-manufactured 40 mm thick solid core flush door shutter conforming to IS 2202

(Part-1):2022, bonded with BWP grade phenol formaldehyde synthetic resin adhesive conforming to IS 848,

comprising seasoned hardwood timber perimeter frame with hardwood battens and solid core construction,

suitable for heavy-duty use. The shutter shall be factory faced on both sides with 4 mm thick natural

decorative veneer, complete with minimum 8 mm thick second-class teak wood lipping on all four edges.

The shutter shall incorporate a vision panel approximately 200 mm × 1800 mm, glazed with 8 mm thick

clear/frosted fully toughened safety glass conforming to IS 2553 (Part-1) and IS 14900, of approved make,

34 MR fixed with matching teak wood glazing beads/mouldings on both sides. 40.00 SQM 6893.00 2,75,720.00

The exposed veneered surfaces shall be factory/site finished with premium two-component matt PU polish,

complete with surface preparation, sealer and finishing coats.

The item shall include SS-304 grade 100 mm heavy-duty butt hinges (minimum three nos. per shutter),

stainless steel screws, neoprene/rubber door seal, cutting, fitting, glazing, fixing, all incidental materials,

labour, tools, tackles, consumables and making good the adjoining work, complete as per approved

drawings, manufacturer's specifications and directions of the Engineer-in-Charge.

Providing and fixing factory-manufactured glazed stile door (double leaf) of overall size 1800 mm (W) ×

2100 mm (H) or as per approved drawings, comprising a frame fabricated from first-class

hardwood/engineered hardwood/HDHMR stiles and rails of approved section, finished with 1.0 mm

decorative laminate or natural veneer with PU polish, and fitted with 10 mm thick clear toughened safety

35 MR glass conforming to IS 2553 (Part 1 & Part 2). The door shall be complete with SS-304 ball bearing butt 2.00 Nos. 71955.00 1,43,910.00

hinges, mortise lock, SS D-handle (minimum 600 mm), floor spring (where specified), tower bolts, door

stopper, EPDM/rubber gasket, all necessary beading, screws, fasteners, sealants, cutting, fitting, alignment

and adjustments, complete as per approved drawings and directions of the Engineer-in-Charge.

36 MR Providing and fixing 450 × 15 × 15 mm Stainless Steel (Grade SS-304) square type tower bolt, satin/matt

finish, complete with matching SS-304 screws, striker plate and all fixing accessories, fixed to wooden doors 20.00 each 1295.00 25,900.00

complete as per the manufacturer's specifications and directions of the Engineer-in-Charge.

37 MR Providing and fixing heavy-duty mortice lock set for double wooden doors, SS-304 satin finish, comprising

mortise lock body, euro/profile cylinder, pair of stainless steel lever handles, strike plate, escutcheon/rose

plates, minimum three keys, matching SS-304 screws and all fixing accessories, complete with fitting, 1.00 each 4605.00 4,605.00

testing and commissioning, as per the manufacturer's specifications and directions of the Engineer-in-

Digitally signed by MANISH

38 MR Providing and fixing concealed hydraulic door closer, CE certified, suitable for wooden doors up to 60 kg

door weight, complete with concealed body, guide rail/arm mechanism (as applicable), fixing plates, cover

plates, SS screws and all accessories. The door closer shall be adjustable for closing speed and latching

action and shall be tested for minimum 500,000 operating cycles. The work shall include routing/cutting of

the door and frame wherever required, complete installation, testing and commissioning, as per the

manufacturer's specifications and the directions of the Engineer-in-Charge.

39 MR Providing and fixing Stainless Steel Grade SS-304 Four Ball Bearing Butt Hinges, size 100 × 75 × 3 mm,

satin/matt finish, complete with matching SS-304 screws, fixed to wooden doors complete with all fixing

accessories, labour, tools and tackles, as per the manufacturer's specifications and directions of the

Engineer-in-Charge.

40 MR Providing and applying Premium Duco Paint Finish on HDHMR partitions, wall panelling, doors, shutters,

mouldings, cabinetry, fascias and other HDHMR surfaces, using approved premium quality NC/PU based

Duco coating system of approved make. The work shall include thorough surface preparation by machine

sanding with progressively finer grit abrasive paper, application of minimum two coats of approved wood

sealer, filling of all joints, grooves, nail holes and surface imperfections using compatible wood filler/putty,

rubbing with fine emery paper between coats, application of one coat of compatible primer/surfacer, followed

by minimum two coats of premium Duco paint by spray application to achieve a smooth, uniform, pinhole- 209.00 SQM 1727.00 3,60,943.00

free, scratch-resistant, stain-resistant and durable finish of approved colour and sheen.

The item shall include edge finishing, masking and protection of adjoining surfaces, touch-up after

installation, complete curing, cleaning, all materials including hardener, thinner, sealers, primers, fillers,

consumables, labour, scaffolding (if required), tools and tackles, complete as per the manufacturer's

specifications and directions of the Engineer-in-Charge.

1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180

2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is

allowed to dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess

sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special

grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 -

hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.

4. On this, final finish with Duco paint of approved brand. -

41 MR Providing and applying Premium Matt Polyurethane (PU) Finish on all exposed veneer surfaces, veneered

shutters, wooden door frames, paneling, furniture and other veneered woodwork, using two-component (2K)

Polyurethane (PU) coating system of approved make. The work shall comprise thorough surface

preparation by machine sanding with progressively finer grit abrasives, application of compatible wood

sealer, grain filler (where required), intermediate sanding, and application of minimum two coats of premium

matt PU finish by spray method to achieve a smooth, uniform, scratch-resistant, stain-resistant, moisture- 325.00 SQM 4245.00 13,79,625.00

resistant and low-sheen finish of approved shade and gloss level (10–20 GU or as approved).

The item shall include all materials, hardener, thinner, sealers, fillers, masking, protection of adjoining

surfaces, scaffolding (where required), labour, tools, tackles, consumables, cleaning and finishing complete

in all respects, as per the manufacturer's specifications and directions of the Engineer-in-Charge.

42 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the

surface even and smooth complete

13.85.3 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic

Compound ) content. With water thinnable 1750.00 sqm 73.95 1,29,412.50

cement primer on wall surface having VOC content less than 50 grams/litre

43 13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic

Compound ) content less than 50 grams/ litre of

approved brand and manufacture, including applying additional coats wherever required to achieve even

shade and colour

Digitally signed by MANISH

Providing, fabricating and fixing MS framework above the false ceiling using MS square/rectangular hollow

sections, angles, channels or flats of approved sizes and thickness as required, welded/bolted to form a

rigid support framework for supporting false ceiling systems, HVAC ducts, light fixtures and other services.

The framework shall be securely anchored to the RCC slab/structural members with approved anchor

44 MR fasteners, threaded rods, cleats, brackets and necessary fittings. The steel framework shall be cleaned and 1790 kg 171.00 3,06,090.00

finished with one coat of zinc/red oxide primer followed by two coats of synthetic enamel paint of approved

shade. The item shall include cutting, welding, grinding, drilling, lifting, erection, scaffolding, all fixtures,

fasteners, consumables, labour, tools and tackles complete as per approved drawings and directions of the

Engineer-in-Charge.

Providing and fixing manually operated Roller Blind System of approved colour, shade and texture,

comprising 100% polyester blackout/sunscreen fabric (as specified), with aluminium roller tube of suitable

diameter, powder-coated aluminium bottom rail, heavy-duty clutch mechanism, stainless steel/plastic bead

chain with safety chain tensioner, universal wall/ceiling mounting brackets, fabric clamping arrangement,

45 MR end caps, fixing screws and all accessories. The blind shall operate smoothly for rolling up and down and 65.00 SQM 2446.00 1,58,990.00

shall be complete with cutting to required size, installation, testing and commissioning, all labour, tools,

tackles and consumables, as per approved drawings, manufacturer's specifications and directions of the

Engineer-in-Charge.

46 MR Providing and fixing pelmet fabricated from 18 mm thick HDHMR board (or BWP Grade Marine Plywood, if

specified), of approved make, size and profile, up to 150 mm height, fixed rigidly to wall/ceiling with

approved aluminium/MS cleats, screws, fasteners and brackets as required. The exposed surfaces shall be

finished with 1.0 mm thick decorative laminate of approved colour, shade and texture, while the exposed

edges shall be finished with 2 mm thick PVC edge banding matching the laminate. The work shall include 30.00 RM 935.00 28,050.00

backing laminate on concealed faces (where required), cutting, edge finishing, necessary grooves/notches,

all hardware, adhesives, labour, tools, tackles and consumables, complete as per approved drawings and

directions of the Engineer-in-Charge.

47 MR Providing and fixing self-adhesive decorative frosted film of approved make, colour and pattern on existing

glass surfaces, including surface cleaning, preparation, cutting to required size and pattern, application

without wrinkles, bubbles or creases, trimming of edges, and complete fixing as per approved drawings and

the directions of the Engineer-in-Charge. The film shall be UV-resistant, moisture-resistant and removable

without damaging the glass surface. The rate shall include all materials, labour, tools, tackles and

consumables required for complete installation.

DEMOLITION & DISMANTLING WORKS -

48 1.1.18 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by

mechanical transport including loading, transporting, unloading to approved municipal dumping ground for 160.00 Cum 494.1 79,056.00

lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, 25.00 Each 367.20 9,180.00

holdfasts etc. complete and stacking within 50 metres lead: Of area 3 sq. metres and below

Dismantling and carefully removing existing electrical wiring, light fixtures, ceiling/wall-mounted fans,

split/window air-conditioners, switches, socket outlets and associated accessories, including disconnection

from the electrical supply, removal without damage, coiling of wires wherever reusable, lowering, stacking,

50 MR shifting to the location designated by the Engineer-in-Charge within the premises, and handing over all 1 Lot 75000.00 75,000.00

serviceable materials to the client. The item shall include all labour, tools, tackles, temporary arrangements

and disposal of unserviceable debris generated during dismantling, complete as per the directions of the

Engineer-in-Charge.

Demolition of brickwork manually/ by mechanical means including stacking of serviceable material and

51 15.7.4 disposal of unserviceable material within 50 metres lead as per the direction of the engineer in charge. In 2 CUM 2060.20 4,120.40

Digitally signed by MANISH

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50

52 15.2 metres lead as per direction of Engineer - in - charge 4 CUM 2,434.25 9,737.00

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres

54 15.23.2 For thickness of tiles above 25 mm and up to 40 mm 545 SQM 113.35 61,775.75

55 15.27 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal

of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by 295 SQM 56.35 16,623.25

Engineer-in-charge.

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50

56 15.42 metres lead :

Dismantling and carefully removing existing sanitary fixtures including water closets (Indian/European),

urinals, wash basins, cisterns, CP fittings, accessories and connected pipe fittings, complete with

disconnection of water supply and waste connections, without damaging reusable materials, stacking

serviceable materials at the location specified by the Engineer-in-Charge and disposing of unserviceable

materials as directed, complete with all labour, tools, tackles and incidental works.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes,

59 15.44.1 manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of 90 Rm 149.80 13,482.00

Engineer-in-charge : 15 mm to 40 mm nominal bore

b 15.44.2 Above 40 mm nominal bore 20 Rm 161.40 3,228.00

Dismantling C.I. pipes including excavation and refilling trenches after

taking out the pipes, manually/ by mechanical means breaking lead caulked

c 15.45.1 joints, melting of lead and making into blocks including stacking of pipes 40 Rm 332.40 13,296.00

& lead at site within 50 metre lead as per direction of Engineer-in-charge: Up to 150 mm diameter

SANITARY & PLUMBING WORKS

Supply, installation, testing and commissioning of Single Lever Concealed Basin Mixer (Wall Mounted)

comprising concealed body, exposed trim kit, operating lever, wall flange, one-piece wall-mounted spout,

ceramic disc cartridge, complete with all accessories, connections, fasteners and fixing arrangements. The

60 MR mixer shall be manufactured from high-quality brass (minimum 60% copper) with chrome finish (minimum 2 Nos. 9066.00 18,132.00

0.3 micron chromium over 10–12 micron nickel plating) conforming to IS 8931, suitable for operation at

working pressure up to 10 kg/cm², complete in all respects as per the manufacturer's specifications and

directions of the Engineer-in-Charge.

Supply, installation, testing and commissioning of Table Top Wash Basin of size approximately 630 × 460 ×

130 mm, manufactured from premium vitreous china/fireclay ceramic, with smooth glazed finish, white or

approved colour, complete with all fixing accessories, brackets/clamps, sealing compound, cutting of

61 MR counter (where required), testing and commissioning, as per the manufacturer's specifications and 2 Nos. 8059.00 16,118.00

directions of the Engineer-in-Charge. The rate shall exclude CP brass fittings, bottle trap, waste coupling,

angle valves and flexible connections, which shall be measured and paid separately.

Supply, installation, testing and commissioning of 32 mm dia full-thread brass waste coupling suitable for

62 MR table-top wash basin, complete with ceramic cap (65 mm dia), overall height approximately 130 mm, chrome- 2 Nos. 1291.00 2,582.00

Supply,finish, silicone/rubber

installation, sealing

testing and washers, lock

commissioning nut, tail

of Bottle Trappiece and

of 32 mmall dia,

fixing accessories.from

manufactured The heavy-duty

63 MR brass with chrome-plated finish, complete with internal partition, 300 mm horizontal wall connection pipe, 3 Nos. 2645.00 7,935.00

190 mm vertical extension pipe, wall flange, sealing washers, nuts, connectors and all fixing accessories.

Supply, installation, testing and commissioning of Rimless Wall Hung Water Closet (WC), size

64 MR approximately 375 × 520 × 400 mm, manufactured from premium vitreous china with white glazed finish, 2 Nos. 17858.00 35,716.00

rimless flushing technology, blind fixing installation, complete with UF (Urea Formaldehyde) soft-close slim

Supply, installation, testing and commissioning of Pneumatic Dual Flush Control Plate, suitable for

65 MR concealed flushing cistern, manufactured from high-impact ABS/polymer or stainless steel, with dual flush 2 Nos. 3572.00 7,144.00

operation (full flush/half flush), anti-scratch finish of approved colour, complete with operating mechanism,

Digitally signed by MANISH

Supply, installation, testing and commissioning of 15 mm dia CP Brass Angular Stop Cock (Angle Valve)

with wall flange, quarter-turn ceramic disc cartridge, chrome-plated finish (minimum 0.3 micron chromium

66 MR over 10–12 micron nickel plating), complete with PTFE tape, fixing accessories, testing and commissioning, 1 Nos. 1358.00 1,358.00

conforming to IS 8931, as per the manufacturer's specifications and directions of the Engineer-in-Charge.

Supply, installation, testing and commissioning of 15 mm dia concealed stop cock with adjustable wall

67 MR flange, manufactured from high-quality forged brass, complete with quarter-turn ceramic disc cartridge, 2 Nos. 1436.00 2,872.00

Supply, finishtesting

installation, (minimum 0.3 micron chromium

and commissioning over

of Hand 10–12(Health

Shower micronFaucet),

nickel plating), adjustable

manufactured from high-

quality ABS/Brass body with chrome-plated finish, complete with 8 mm dia × 1.2 m long stainless steel

braided flexible hose, wall hook, operating trigger, connectors, PTFE tape and all fixing accessories. The

health faucet shall be suitable for operation at working pressure up to 10 kg/cm², complete with installation,

testing and commissioning, as per the manufacturer's specifications and directions of the Engineer-in-

Supply, installation, testing and commissioning of Pneumatic Single Piece Slim Concealed Cistern System

67 MR for wall-hung water closet, comprising high-density polyethylene (HDPE) concealed cistern with pneumatic 2 Nos. 12520.00 25,040.00

dual-flush mechanism, heavy-duty powder-coated galvanized steel installation frame suitable for wall-hung

Providing mounting

and fixing brackets,

P.V.C. wasteadjustable legs, or

pipe for sink inlet and outlet

wash basin valves, installation

including kit, S-type

P.V.C. waste fittingsdrain pipe

Providing and fixing 6 mm thick premium quality float glass mirror of approved size with machine-polished

bevelled edges (20–25 mm wide), fixed over 6 mm thick BWP grade waterproof plywood backing, using SS-

304 mirror screws with chromium-plated decorative caps at all corners and approved mirror

69 MR adhesive/silicone sealant. The work shall include cutting to required size, edge polishing, plywood backing, 4.5 Sqm 5181.00 23,314.50

all fixing accessories, labour, tools, tackles and consumables, complete as per approved drawings and

directions of the Engineer-in-Charge.

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality

70 18.53 conforming to IS : 8931

18.53.1 15 mm nominal bore 10 Nos. 450 4,500.00

71 18.76 Cutting holes upto 30x30cm in walls including making good the same. -

18.76.1 With common burnt clay F.P.S. (non modular) bricks 2 Nos. 416.8 833.60

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching surface after

72 18.78 housing G.I. pipe etc. 5 Mtr. 202.9 1,014.50

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &

cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00

73 18.8 m spacing. -

This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases

and making good the same including testing of joints complete as per direction of Engineer in Charge.

Concealed work including cutting chases and making good the -

a 18.8.1 walls

nominal outer dia pipes 80 Mtr 497.8 39,824.00

b 18.8.2 20mm nominal outer dia pipes 80 Mtr 537.6 43,008.00

c 18.8.3 25mm nominal outer dia pipes 80 Mtr 627.25 50,180.00

d 18.8.4 32mm nominal outer dia pipes 80 Mtr 739.3 59,144.00

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and

74 18.51 weighing not less than 690 gms. -

Digitally signed by MANISH

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste,

and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials

and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers,

WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at

wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor &

75 MR basement ceiling / external work etc. including chase cutting as required, excavation and back filling in -

all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors /

building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work,

breaking and making good the walls and floors etc. after pipes have been duly laid and tested.

The rubber ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm

slotted angle. The cost will include all support arrangements. The work includes

commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at -

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) 150 Mtr 765.00 1,14,750.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) 150 Mtr 495.00 74,250.00

Providing, fixing, jointing, testing and commissioning ISI marked unplasticized PVC (uPVC) waste water

pipes conforming to IS:4985 of minimum Class-2 (6 kg/cm² pressure rating) complete with all necessary

uPVC fittings such as bends, tees, reducers, enlargers, sockets, couplers, unions, adaptors and

accessories, fixed on walls/ceilings with approved heavy-duty PVC/MS clamps, GI saddles, anchor

76 MR fasteners and supports at required spacing, including cutting/chasing holes in walls, floors and RCC slabs -

wherever required and making good the same with cement concrete (1:2:4), cement mortar and matching

finishing, complete as per drawings, specifications and direction of Engineer-in-Charge. The item includes

hydraulic testing and commissioning complete.

Providing & fixing uPVC Plain Floor Trap (4" Height) with 50/75 mm outlet, SS 304 grating and height raiser,

complete in all respects.

Extra for providing & fixing 125 mm dia C.P. grating in place of C.I.

grating over floor traps.

Providing and fixing Stainless Steel (SS 304) Floor Cleanout, round or square type, minimum 100 mm

dia/size, with removable flat cover, neoprene/rubber sealing gasket, stainless steel screws, frame, all

79 MR necessary accessories, solvent cement, cutting/chasing, fixing, testing and making good the surrounding 2 Nos. 1510.00 3,020.00

floor complete as per manufacturer's specifications and direction of Engineer-in-Charge.

Supply, Installation, Testing and Commissioning of wall-mounted manual liquid soap dispenser of minimum

1000 ml capacity, fabricated from SS 304 with satin finish (or high-impact ABS body as specified), vandal-

resistant lock, concealed wall fixing arrangement, complete with all mounting hardware, screws, rawl plugs

and accessories, as approved by the Engineer-in-Charge.

Supply, Installation, Testing and Commissioning of wall-mounted Toilet Roll Holder with Cover, fabricated

from SS 304 stainless steel with satin/chrome finish, concealed fixing arrangement, complete with stainless

81 MR steel screws, rawl plugs and all necessary accessories, fixed in position as per manufacturer's specifications 2 Nos. 1075.00 2,150.00

and direction of Engineer-in-Charge.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and

82 17.1 stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls

wherever required :

Kitchen Sink with Drain Board

Digitally signed by MANISH

Supply, Installation, Testing and Commissioning of table-mounted Single Lever Sink Mixer with extractable

dual-flow hand shower, complete with ceramic cartridge, swivel spout, 1.2 m long retractable hose, 450 mm

83 MR long stainless steel braided flexible connection hoses, fixing accessories, testing and commissioning, 1 Nos. 9066.00 9066.00

complete as per manufacturer's specifications and direction of Engineer-in-Charge.

Providing, fabricating, supplying and fixing shower cubicle partitions made of 12 mm thick Compact High

Pressure Laminate (HPL) board conforming to EN 438/IS standards, waterproof, anti-bacterial and self-

supporting, comprising partition panels and door complete with heavy-duty nylon hardware including hinges,

84 MR indicator bolt, door knob, coat hook, rubber buffer, U-channels, adjustable support legs, SS 304 screws, 1 Nos. 10074.00 10,074.00

fasteners and all accessories, fixed in true line and level, complete in all respects as per approved drawings

and direction of Engineer-in-Charge.

Providing, fabricating, supplying and fixing urinal partition fabricated from 12 mm thick Compact High

Pressure Laminate (Compact HPL) board conforming to EN 438 / ISO 4586, of approved colour, texture and

shade, having smooth, non-porous, antibacterial, moisture-resistant, termite-proof, impact-resistant and fire-

retardant properties, with chamfered and polished edges.The partition shall be of size 600 mm (W) × 900

mm (H) and fixed to wall using heavy-duty SS 304 grade satin/matt finish brackets of minimum 3 mm

85 MR thickness, complete with SS 304 screws, anchor fasteners, nylon plugs, concealed fixing arrangement 2 Nos. 4893.00 9,786.00

wherever applicable, edge protection, sealant, cutting, drilling, finishing and making good the surrounding

surfaces, including all labour, materials, tools, tackles, consumables and accessories required for complete

installation, all as per the approved drawings, manufacturer's specifications and directions of the Engineer-in-

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of

430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard

flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings

and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre

white P.V.C. automatic flushing cistern.

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x

390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet

87 17.80 from back side, including fixing to wall with suitable brackets all as per manufacturers specification and 2 Nos. 7979.20 15,958.40

direction of Engineer-in-charge.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension

comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly

reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required

length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads

and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with

hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8

88 9.147A mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash -

shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and

drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with

weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per

approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon

sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra

payment on this account shall be made

9.147A4.2 Three track three panels-R3 Series 65 Sqm 10,874.20 7,06,823.00

Providing & fixing Acoustic wall paneling using GI chanels of 50mm width 0.5mm thickness. 50mm rockwool

to be filled with proper tissue paper. 12mm MDF to fixed over the GI frame work from one side. 9mm thick

acoustic pet panel of approved shades and design achieved by CNC cutting Shall be over MDF.

Providing & fixing Photo frames as per drawing & layout. The photo frame shall be made of premium

European style premoulded Photo frames.

Digitally signed by MANISH

Add Modification factor @0.973 as per CPWD circular 76,96,278.65

Add CPWD cost index @1.03 on DSR civil 2023 79,27,167.01

Grand Total 1,96,83,224.95

Grand Total 1,96,83,224.95

Digitally signed by MANISH

SCHEDULE OF QUANTITIES - FURNITURE WORKS

S NO DSR/ DESCRIPTION Qty. UNIT RATE AMOUNT REFERENCE IMAGE

Chairman Cabin: Providing & placing of main table with the overall size of the table shall be 3050L x 1850D

x 630/740H +/-25 mm. The main table top shall be Made up of minmium 50mm thick chamfered Profile in

membrane finish. The tabletop shall be resting on one side of the small storage made up of minimum 25 &

16mm thick Particle Board and other side on the side unit. The Main Table top shall have the sleek chamfer

design of 20mm straight and the rest will be tappered. The Modesty of the table shall be come up minimum

16mm particle board. In this one steel strip of 10mm wide shall be placed horizontally in front of the modesty

which inhancing the looks of this executive table. The table shall not have any sharp edges. The table shall

have Flaper box access with size of 300 Length for easy wire access. The table shall be made of prelaminated

particle Board. Side unit shall comes with the configurations of 2 shutter 2 drawer and rest is open for CPU.

The side unit top shall be come up with 25mm thick same sleek chamfer design with of 8mm straight and the

rest will be tappered. the shutters and shelves shall be made up of 16mm of thick laminated panel. The

shutters shall be comes with finger groove handle made up of alluminium trims. Other sides small single

shutter storage made up of same as side unit. The Overall size of the small storage shall be

600WX850DX630H +/-25 mm. All the Drawer and shutters shall be operated by finger groove with the help

of aluminium extrusion on the top of Drawer and shutter facia of size 35LX18D with 1.5mm of thickness.

70mm skirting shall be provided at bottom made up of 16mm thick laminated particle board.

Back Unit: The overall size of the back unit shall be 2400L x 400D x 1200H +/-25 mm. The Back unit top

shall be minimum 25mm thick Particle Board with straight edge banding. And The Rest Body shall be made

up of minimum 16mm thick laminated particle board including sides verticle and horozontal panel and shutter

2 MR as well as. single shutter shall be provided with two compartments. rest will be comes with open 2 Nos. 274503 549006

compartments. All the compartments made up of different different sizes which looks good and we can use

each and every compartmens for different purposes. 70mm skirting shall be provided at bottom made up of

16mm thick laminated particle board.

Back Unit: The overall size of the back unit shall be 2400L x 400D x 1200H +/-25 mm. The Back unit top

shall be minimum 25mm thick Particle Board with straight edge banding. And The Rest Body shall be made

up of 16mm thick laminated particle board including sides verticle and horozontal panel and shutter as well

3 MR as. single shutter shall be provided with two compartments. rest will be comes with open compartments. All 2 No. 274503 549006

the compartments made up of different different sizes which looks good and we can use each and every

compartmens for different purposes. 70mm skirting shall be provided at bottom made up of 16mm thick

laminated particle board.

Digitally signed by MANISH

Total height 1210 to 1280mm. High back Chair having back height of 770 +/-25mm and width of 380 +/-

25mm from top & 500 from mid (lumbar) level. Seat Depth shall be 480 +/-25mm and seat width shall be 540

+/-25mm at front & 450 +/-25mm at back. Armrest to Armrest distance of 680 +/-25mm. Seat height shall

range between 410 mm to 470 mm. Armest shall be finished with foam & leather on the user side & top with

water fall edge to provide comfort to user & outside of armrests as well as below back shall be finished with

wooden texture. Below portion of armrest opening towards seat shall be finished with crome surface. Knee tilt

4 MR mechanism shall be provided having tilt tension adjustment & height adjustment at same level on right hand 2 No. 53361 106722

side of user & any position locking level at the left hand side of user. Padded lumber support to be provided of

height minimum 200 mm. Back of the chair shall be finished with leather upto height of 600 mm & wooden

texture finish upto 200 mm & leather below the wooden texture. Aluminium die cast pedestal having length of

prongs 310 mm with 50 mm height towards centre & 25 mm height outside. High Quality leather in beige or

black to be suppiled. Twin wheel castors to be provided.Tolerance of +/- 25mm to be considered for product

sizes i.e Length, Depth & height.

Total heigt 1050 to 1120mm. Mid back Chair having back height of 610 +/-25mm and width of 380 +/-25mm

from top & 500 +/-25from mid (lumbar) level. Seat Depth shall be 480 +/-25mm and seat width shall be 540

+/-25mm at front & 450 +/-25mm at back. Armrest to Armrest distance of 680 +/-25mm. Seat height shall

range between 410 +/-25mm to 470 +/-25mm. Armest shall be finished with foam & leather on the user side

& top with water fall edge to provide comfort to user & outside of armrests as well as below back shall be

finished with wooden texture. Below portion of armrest opening towards seat shall be finished with crome

5 MR surface. Knee tilt mechanism shall be provided having tilt tension adjustment & height adjustment at same 12 Nos. 34922 419064

level on right hand side of user & any position locking level at the left hand side of user. Padded lumber

support to be provided of height min. 200 mm. Back of the chair shall be finished with leather upto height of

440 mm +/-25 mm & wooden texture finish upto 200 mm +/-25 mm & leather below the wooden texture.

Aluminium die cast pedestal having length of prongs 310 mm with 50 mm height towards centre & 25 mm

height outside. High Quality leather in beige or black to be suppiled. Twin wheel castors to be provided.

Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height.

Digitally signed by MANISH

PA Cabins:SIZE: 1800LX600DX750 +/-25 mm SIDE UNIT: 900LX450DX750H +/-25 mm The worktop

shall be made of minimum 25mm thick pre laminate partical boards with E1 norms dully finish with 2mm

pvc edge band all the side of worktop. Modesty shall be made of 18mm thick pre laminate partical boards

with E1 norms with 2mm pvc edge band all the visible side. The height of the modesty shall be 450mm. The

main tables shall be supported by special design legs. The legs shall be minimum Dia 44mm minimum ERW

Tube confirming to IS 4923 : 1997 – 16g. Main leg members shall be connected through a horizontal member

size 1.6mm thk, 50x25 cold formed ERW tube by the aluminium die casted connector which having opening

of 44mm dia on vertical side & 50 x 25 on the horizontal side to accommodate connection of Leg &

horizontal frame.The legs shall have clear & tough polycarbonate leg bush & swivel type levelers to cater for

floor undulations ± 20 mm. The legs shall be connected with Cross beams. The Cross Beams shall be of

40x20 mm ERW tubes- 16 g. The cross beams shall be connected to the legs with specially designed

Aluminum Die Cast connectors by using Hi Tensile Allen bolts as per the design. The Engineering plastic

components shall be made with Acrylonitrile butadiene styrene (ABS) which are confirming to ASTM D256

for Izod Impact (1/4”) for Leg shoe and levelers. The spacers shall be fitted to the main leg to give a floating

look as well to support the table top. The spacers shall be made of Polycarbonate (PC).Wire Management: 300

mm Anodised flip up Made of Aluminum in anodised finish, that shall have soft closure and three way wire

acess & PVC cable tray. For entry of cables from the floor into the cable tray, Wire Entry. Side storage of size

900 x 450 x 750 H to be provided made up of 18mm thick PLPB E1 norms composite having two drawer &

filling units/ shutters. back panel made up of 9mm thickn PLPB E1 norms. Finger groove shall be created by

providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside at 45

degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable lock shall be

provided. The OEM shall have ISO 9001, BIFMA Level 2, Green Guard Certification.

Digitally signed by MANISH

PA Cabin Main Chair:The overall size of Chair shall be : width 600 +/-25mm, depth 640 +/-25mm. Total

height 1170 to 1270 mm, Back Width 425 +/-25 mm mm at Top and 500 +/-25 mm at bottom, Seat Width

500 +/-25 mm, Seat Depth 470+/-25 mm and Seat height 470mm to 570 mm +/-25mm range. Seat made up

of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400.

Seat shall be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection

conforming to IS 3400. Seat shall be uplhostered with micro fabric 100% polyster 180 GSM abrasion >

50000 cycles. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied

with Mesh Back rest. The back frame shall be made up of Injection molded PPGF 20% in light grey shade,

armest support also in light grey shade. PPGF Frame thickness shall be minimum 4.8mm. The chair shall have

7 MR Greenguard & India Design Mark certification. Adjustable Lumbar Support made up of PU having size 365 4 Nos. 13500 54000

mm x 110 mm x 25mm thick shall be provided for better comfort. Lumbar Support material Integrated one-

piece Molded PU. The mechanism shall allow 360 degree revolving feature along with height adjustablility.

One Way Adjustable Arms (Height) to be provied with height adjustment button of size 73mm x 18mm.

Armrest Height shall be 170mm to 260mm adjustable from Seat. The Gas Lift used shall be class 4 tested as

per ANSI BIFMA standards. Metal base shall be provided of light grey color matching the chair back &

armrest. The base shall be made up of mild steel powder coated in grey shade to match the entire grey theme

of chair.Metal base powder coated made up of sheet thickness 2mm.Tolerance of +/- 5mm to be considered

for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe

sizes. The OEM shall have ISO 9001, BIFMA Level 2, Green Guard Certification.

PA Cabin Visitor Chair:The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is

made up of injection moulded glass filled nylon & upholstered using net fabric with high tenacity yarn.

Seat Size:- 47cm(w) × 51.5cm (D) +/-25 mm. The HR polyurathene foam is moulded with density =55+/-

2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up

Down adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer

of thermoplastic elastomer. Armrest is made up of plastic injection moulded nylon with textured top. It shall

8 MR have Front pivot synchro mechanism with following features. 360 degree revolving type, Single point control, 12 Nos. 11500 138000

front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of

1:2. The lumber support consists of polypropylene pad with mouled polyurathene foam & covered with

polyester fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the rear

side of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm in height. The work shall be carried out as per

guidance and instructions recieved from Engineer Incharge. This shall come along a headrest from same

Digitally signed by MANISH

The overall size of Conference Table shall be 7500LX2400X750Hmm+/-25 mm .The main worktop size shall

be made of minimum 25mm thick pre laminate partical boards with E1 norms dully finish with 2mm pvc

edge band all the side of worktop. Modesty shall be made of 18mm thick pre laminate partical boards with E1

9 MR norms with 2mm pvc edge band all the visible side .The Height of the modesty shall be 450H mm.And the 1 No. 290000 290000

gable end shall be made of 25mm thick pre laminate partical boards with E1 norms dully finish with 2mm pvc

edge band all the side.Wire Management: 450mm aluminium flip up, provision to mount switchesand sockets

on PVC cable dump and Vertical wire entry cover for wire uptake from floor to cable dump.

The overall size of Chair shall be : Total height 1010 to 1110 +/-25 mm, Back Width 480 mm at Top and

420mm at bottom, Seat Width 500 +/-25 mm, Seat Depth 460+/-25 mm and Seat height 460mm to 560 mm

+/-25mm range. And over all chair width should be 615 +/-25mm and Overall chair depth should be 640 +/-

25mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50%

deflection conforming to IS 3400. Seat & back shall be upholstered with Leatherette 75% PVC & 25%

polyester – 640 GSM, Abrasion- 100000 cycles over PU foam. No flamming or progressive smoldering

within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be

used. The chair shall be supplied with addtional Dynaflex mechanism Two Piece Back Construction with

cushion foam at 55kg/m3 density having PP back. The Chair should be provided with Synchro tilt

Mechanism – with three Multi lock features. The mechanism shall allow 360 degree revolving feature along

with height adjustablility. One Way Adjustable Arms (Height) to be provied with height adjustment button.

Nylon Base to be provied. Twin castors 60 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1

2017 standards. the axle pin shall be rust protected zinc passivated. The base shall be 660 mm PCD (26

inches) five pronged bases made up of PA6, 30% glass filled reinforced with bottom ribbing for additional

buttress and strength.Tolerance of +/- 25mm to be considered for product sizes i.e Length, Depth & height.

Sofa Seat for Waiting area: Overall size High-back sofa offering firm lumbar support for comfortable

upright or casual seating.• Broad seating space plus longer length of the 3-seater makes it ideal for

napping or relaxed lounging.• A unique and aesthetic armrest, with a wooden panel on top, which doubles

up as a coffee table.• Comes in LH and RH configurations for higher flexibility. \The overall size of three

seater sofa shall be 1830L x 750D x 740H +/-25 mm.The structure of the sofa shall be made up of silver

wood and pine wood. The foam used in making this sofa shall be of minimum density 32 and 40. Roll poly

filling should be used with this pu foam for giving extra comfort and softness to sofa. high quality nevar belts

& good quality stapler pins to be used. The sofa shall be upholtered with leatherette 75% PVC & 25%

polyster - 640 GSM, Abrasion - 100000 cycles The legs shall be made up of stenless steel finish material. The

OEM shall have ISO 9001, BIFMA Level 2, Green Guard Certification.

Digitally signed by MANISH

Sofa Seat for Waiting area:Overall size High-back sofa offering firm lumbar support for comfortable

upright or casual seating.• Broad seating space plus longer length of the 2-seater makes it ideal for

napping or relaxed lounging.• A unique and aesthetic armrest, with a wooden panel on top, which

doubles up as a coffee table.• Comes in LH and RH configurations for higher flexibility. 2 Seater Sofa :

Overall size shall be 1610 mm W x 1000 mm D x 880 mm H +/-25 mm. Sofa inner frame structure shall be

made from the combination of treated solid wood and plywood having high quality webbing belts to ensure

good strength, rigidity & stable construction to offer high durability. There shall be extra padding between the

armrest & the seat on both sides for better comfort & polyfilled in arms & backrest. The polyurethane (PU)

foam shall be used in Seat & back rest having minimum 40 density and 32 density respectively. Seat to

backrest angle should be ergonomically designed to offer the best seating comfort. Seat height shall be

normally between 16 to 18 inches and depth shall be between 20-22 inches. The sofa shall have solid wooden

leg. Upholstery shall be of high quality Leatherite offer the best feel & comfort. The OEM shall have ISO

9001, BIFMA Level 2, Green Guard Certification.

3 Seater Sofa : Overall size shall be 2020 mm W x 975 mm D x 820 mm H +/-25 mm. Sofa inner frame

structure shall be made from the combination of treated solid wood and plywood having high quality webbing

belts to ensure good strength, rigidity & stable construction to offer high durability. There shall be extra

padding between the armrest & the seat on both sides for better comfort & polyfilled in arms & backrest. The

13 MR polyurethane (PU) foam shall be used in Seat & back rest having minmimum 40 density and 32 density 4 Nos. 63372 253488

respectively. Seat to backrest angle should be ergonomically designed to offer the best seating comfort. Seat

height shall be normally between 16 to 18 inches and depth shall be between 20-22 inches. Sofa shall be

elevated from ground by about 3 inches using Golden finished metal legs creating provision for easy cleaning

& better look. Upholstery shall be of high quality Leatherite offer the best feel & comfort.

Two Seater Sofa : Overall size shall be 1610 mm W x 975 mm D x 820 mm H +/-25 mm. Sofa inner frame

structure shall be made from the combination of treated solid wood and plywood having high quality webbing

belts to ensure good strength, rigidity & stable construction to offer high durability. There shall be extra

padding between the armrest & the seat on both sides for better comfort & polyfilled in arms & backrest. The

14 MR polyurethane (PU) foam shall be used in Seat & back rest having 40 density and 32 density respectively. Seat 4 Nos. 52132 208528

to backrest angle should be ergonomically designed to offer the best seating comfort. Seat height shall be

normally between 16 to 18 inches and depth shall be between 20-22 inches. Sofa shall be elevated from

ground by about 3 inches using Golden finished metal legs creating provision for easy cleaning & better look.

Upholstery shall be of high quality Leatherite offer the best feel & comfort.

Centre Table : The Center table in size shall be of 1050Lx 525 D x 550 H (mm) +/-25 mm. Table top shall be

made up of 18mm thick Prelaminated particle board E1 norms dully finish with 2mm pvc edge band all the

side. Understructure shall be made up of 19x19mm square MS pipe having thickness of 1.6 mm. Frame shall

be welded by CO2 welding process for uniform conforming to IS 816. Understructure shall be powder coated

upto 40 to 60microns. Hexa Levelar shall be provided at bottom. The OEM shall have ISO 9001, BIFMA

Level 2, Green Guard Certification.

Digitally signed by MANISH

Side Table:Center table in size of 600 Dia x 450 H (mm) +/-25 mm. Table top shall be 18mm thick

Prelaminated particle board E1 norms and the Understructure shall be made up of 19x19mm square MS pipe

16 MR having thickness of 1.6 mm. Frame shall be welded by CO2 welding process for uniform conforming to IS 8 Nos. 14659 117272

816. Understructure frame shall be powder coated in black shade. The OEM shall have ISO 9001, BIFMA

Level 2, Green Guard Certification.

High Tea Area Table: Supplying & Placing Table with veneer table top and wooden base. All the wooden

surface shall be Matt polished. 10mm Glass top with beveled edge over the veneer Surface. Size 1000mm dia

:The Center table in size shall be of 1050Lx 525 D x 550 H (mm) +/-25 mm. Table top shall be made up of

18mm thick Prelaminated particle board E1 norms dully finish with 2mm pvc edge band all the side.

Understructure shall be made up of 19x19mm square MS pipe having thickness of 1.6 mm. Frame shall be

welded by CO2 welding process for uniform conforming to IS 816.Understructure shall be powder coated

upto 40 to 60microns. Hexa Levelar shall be provided at bottom. The OEM shall have ISO 9001, BIFMA

Level 2, Green Guard Certification.

The overall size of Chair shall be : Total height 1010 to 1110 mm, Back Width 480 mm at Top and 420mm at

bottom with +/-25 mm, Seat Width 500 +/-25 mm, Seat Depth 460+/-25 mm and Seat height 460mm to 560

mm range. And over all chair width should be 615 +/-25mm and Overall chair depth should be 640 +/-

25mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50%

deflection conforming to IS 3400. Seat & back shall be upholstered with Leatherette 75% PVC & 25%

polyester – 640 GSM minimum, Abrasion- 100000 cycles over PU foam. No flamming or progressive

smoldering within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021

18 MR (match) should be used. The chair shall be supplied with addtional Dynaflex mechanism Two Piece Back 24 Nos. 19932 478368

Construction with cushion foam at 55kg/m3 density having PP back. The Chair should be provided with

Synchro tilt Mechanism – with three Multi lock features. The mechanism shall allow 360 degree revolving

feature along with height adjustablility. One Way Adjustable Arms (Height) to be provied with height

adjustment button. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon Base to be

provied. Twin castors 60 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. the

axle pin shall be rust protected zinc passivated. The base shall be 660 mm PCD (26 inches) five pronged

bases made up of PA6, 30% glass filled reinforced with bottom ribbing for additional buttress and

strength.Tolerance of +/- 25mm to be considered for product sizes i.e Length, Depth & height.

Digitally signed by MANISH

The overall size of table shall be 1500L x 600D x 750H +/-25 mm. The worktop shall be made of minimum

25mm thick pre laminate partical boards with dully finish with 2mm pvc edge band all the side of worktop.

The understructure will feature vertical legs made of 50 mm x 50 mm x 1.6 mm +/-25 mm steel tubing, while

the horizontal frame will be constructed from 50 mm x 25 mm x 1.6 mm steel +/-25 mm, A cross beam, sized

40 mm x 20 mm x 1.6 mm, +/-25 mm across the length of the table, will be installed beneath the tabletop to

provide additional support. This cross beam shall be connected on both sides with pressure die cast connectors

of 50 mm height, 70 mm width & 35 mm depth (+/-25 mm) designed in a shape acting as spacer between

horizontal frame & worksurface. Medium height storage shall be 900 x 450 x 1800 (WDH) mm +/-25 mm.

Top shall be made up of 18mm thick pre laminated PLY board and Back shall be made up of 9 mm thick pre

laminated PLY board with 2mm PVC edge lipping, Shutters shall be made up of 18 mm thick pre laminated

PLY board. Shutters to be provied for compartment. The storage shall have adjustable shelf. Edge: All

exposed shall be sealed with 2mm thick PVC edge lipping. The hinged doors top shall be provided with finger

groove handle-less design for a streamlined look. Finger groove shall be created by providing a reverse tapered

profile edge of 6mm straight surface & 12 mm tapered towards inside @ 45 degree & then sealed with

minimum 2mm thick PVC lipping on automatic machine. Cam Lock faciltity should be provided for safe

storage. The OEM shall have ISO 9001, BIFMA Level 2, Green Guard Certification.

High Tea Area Serving Counter: Providing, fabricating, supplying and fixing High Tea Area Serving Counter

made from 18 mm thick HDHMR board, externally finished with natural veneer and premium PU polish,

internally finished with 1.0 mm decorative laminate, complete with 12 mm thick solid surface countertop,

combination of drawers and shutters with soft-close hardware, SS handles, telescopic channels, hinges, PVC

edge banding, all accessories, labour, transportation and installation complete as per approved drawings and

directions of the Engineer-in-Charge.

Digitally signed by MANISH

Providing & fixing Auditorium Chairs: The Auditorium chair shall be size of overall width 635mm +/-25

mm, Overall height -1030mm+/-25 mm. Seat: size- 450mm. (W) x 470 mm (D) x 150 mm (T) +/-25 mm at

front edge and 80 mm at rear edge. Seat to Back height shall be 740mm +/-25 mm and back width shall be

460mm +/-25 mm. Seat frame of ERW Tube / IS :3074-2005 GRADE 1-20 mm square Pipe 1.2 mm OR

Mild Steel of size 20 X 5 mm flat “ C “ bend type. Seat shall be Auto tip. Back: Back Rest frame of ERW

Tube / IS :3074-2005 GRADE 1-19 dia Round Pipe 1.2 mm OR Mild Steel of size 25 X 3 mm flat bend as

per ergonomic contour “ S “ bend to suit the body shape.The back foam shall be designed with contoured

lumbar support for upright and tilted conditions. The seat & back frame should be nicely covered with PPCP

tray with 3 to 4 mm minimum wall thickness. It should comply to sound acoustic properties. The chair shall

rest on the ground on two side panel frames (Side Panel/Aisle Panel ). Stand shall be in tubular steel structure.

Metal tube IS : 4923-1997- 80 X 40 mm, 1.63 Thickness. M.S. sheet metal frame formed in 1.6 mm. The side

wooden panel must be 6 mm thick with fabric upholster with a spacing of 560 mm.The side panels shall be

fixed to the floor using 4 nos Grouting bolt - M 8 X 75 mm expandable anchor fasteners with chemicals for

grouting. All Mild steel components will be epoxy polyester powder coated to 50-60 microns. The powder

coating process shall undergo minimum 7 step rust resistance pre treatment process viz degreasing, pickling as

per IS standard. After pre treatment process, the components should be NANO coated and passified for better

adhesion of paint as per IS 3618.The chair shall be provided with sharing armrest. The OEM shall have ISO

9001, BIFMA Level 2, Green Guard Certification.

GRAND TOTAL 8165112

GRAND TOTAL 8165112

Digitally signed by MANISH

SCHEDULE OF QUNATITIES-ELECTRICAL & HVAC WORKS

DSR NO DESCRIPTION

UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

2025 DSR (INR) NON-DSR (INR)

A Electrical work

1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable in surface / recessed medium class PVC conduit, with modular

switch, modular plate, suitable GI box and earthing the point

with 1.5 sq.mm.

FRLS PVC insulated copper conductor single core cable etc as

1.55 Wiring for group controlled (looped) light point/ fan point/call bell

point (without independent switch etc.) with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface

/ recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS

PVC insulated copper

conductor single core cable etc as required.

Wiring for light/ power plug with 2X2.5 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed medium

class PVC conduit alongwith 1 No 2.5 sq. mm FRLS PVC

insulated copper conductor single core cable for loop earthing as

1.24 Supplying and fixing following modular switch/ socket on the

existing modular plate & switch

box including connections but excluding modular plate etc. as

1.24.4 3 pin 5/6 amp socket outlet Each 80 136.00 10880.00

1.24.5 6 pin 15/16 amp socket outlet Each 40 219.00 8760.00

Digitally signed by MANISH

5 1.26 Supplying and fixing modular blanking plate on the existing

modular plate & switch box Each 15 47.00 705.00

excluding modular plate as required.

1.27 Supplying and fixing following size/module, GI box along with Modular

base & cover plate on

existing modular metal boxes etc. as required.

SUBMAIN AND CONTROL WIRING

1.14 Wiring for circuit/ submain wiring alongwith earth wire with the

following sizes of FR PVC insulated copper conductor, single core

cable in surface/ recessed medium class PVC conduit

1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 335 267.00 89445.00

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 240 373.00 89520.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 85 482.00 40970.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 150 1078.00 161700.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 75 1454.00 109050.00

Supplying and making end termination with brass compression gland

and aluminium lugs for following size of PVC insulated and PVC

sheathed / XLPE aluminium conductor cable of 1.1

KV grade as required.

Digitally signed by MANISH

MR Supply of following XPLE armourned 1.1 KV grade conforming

to I.S.7098/1554Aluminium

Supply of following sizes of PVC sheathed PVC/XLPE

insulated Aluminium conductor armoured cable of 1.1 KV grade

conforming to IS:7098 part-1 / IS:1554 part-1 respectively &

(a) 3.5 C x 120 Sqmm XLPE cable RM 1 2786.00 2786.00

(b) 3.5 C x 95 Sqmm XLPE cable RM 1 1929.00 1929.00

(c ) 3.5 C x 70 Sqmm XLPE cable RM 1 1643.00 1643.00

(d) 3.5 C x 50 Sqmm XLPE cable RM 25 1257.00 31425.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 25 971.00 24275.00

10 MR Supply of following sizes of copper cables -PVC sheathed

PVC/XLPE insulated Copper conductor armoured cable of 1.1 KV

grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively

(a) 4 C x 16 Sqmm XLPE copper cable RM 35 2240.00 78400.00

(b) 4 C x 25 Sqmm XLPE copper cable RM 35 3325.00 116375.00

(c ) 3.5 C x 35 Sqmm XLPE copper cable RM 1 4545.00 4545.00

(d) 3.5 C x 50 Sqmm XLPE copper cable RM 1 6445.00 6445.00

11 2.11 Supplying and fixing single pole blanking plate in the existing

MCB DB complete etc. As required.

12 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,

"C" curve, miniature circuit breaker suitable for inductive load of

2.10 following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

2.13 Supplying and fixing following rating, four pole, 415 volts,

isolator in the existing MCB DB complete with connections, testing

and commissioning etc. as required.

Digitally signed by MANISH

2.4 Supplying and fixing following way, horizontal type three pole

and neutral, sheet steel, MCB distribution board, 415 V, on

surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as

required. (But without MCB/ RCCB/ Isolator)

MR Supply, installation, testing and commissioning of 12 Way (4 + 36)

Double Door Distribution Board, suitable for modular MCBs, made of

CRCA sheet steel, powder coated finish, complete with removable

gland plates, earth terminal, neutral link, phase barriers, DIN rail Each 2 15600.00 31200.00

mounting arrangement, lockable door, and all accessories, suitable for

415V, 3 phase, 4 wire supply system, complete as required for

satisfactory operation.

Supplying and fixing following rating, double pole, (single phase

and neutral), 240 volts, residual current circuit breaker (RCCB),

2.14 having a sensitivity current upto 300 milliamperes in

the existing MCB DB complete with connections, testing and

15 commissioning etc. as required.

MR Supply, installation, testing and commissioning of Galvanized Iron (GI)

Raceway made from minimum 1.2 mm thick GI sheet, factory

fabricated, with removable cover, internal partitions/dividers wherever

16 specified, including GI couplers, GI supports/brackets, fasteners,

bends, tees and all required accessories complete in all respect as

per directions of Engineer-in-Charge.

a 300mmx38mm(GI) - 3 compartment Mtr 1 1970.00 1970.00

b 225mmx38mm(GI) - 3 compartment Mtr 1 1560.00 1560.00

Digitally signed by MANISH

MR Supply, installation, testing and commissioning of height adjustable

junction boxes for direct access to cables at intersection of raceways,

fabricated with GI body and provided with 3 mm thick SS-304 cover

17 plate, complete with base frame, adjustable supports, couplers, fixing

accessories and all necessary hardware, complete in all respect as

per directions of Engineer-in-Charge.

4.1 Supplying and Installation of following size perforated of painting

with powder coating M.S. cable trays of perforation of not more than

17.5% in convinient sections, joined with connectors suspended from

18 the cieling with MS suspenders including bolts and nuts painting

etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Mtr. 150 1243.00 186450.00

Designing, fabricating, transporting, unloading, storing, fixing

in position, testing and commissioning the following sheet steel

cubicle type panels fabricated from 1.6mm thick CRCA sheet, dust

and vermin proof, outdoor type double door with canopy, TPN Panels

with hinged lockable doors fabricated from 2mm thick CRCA

sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear

MR access for cable alley and with segregated bus-bar chamber with

tinned aluminium bus bar and including supplying and fixing following

switchgears, meters and accessories, inter-connections, bonding to

earth, powder coated painting and marking as

specified. Switch boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in

Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

Digitally signed by MANISH

1 nos, 250 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit

Breaker of fault breaking

TPN aluminum bus bars of minimum of 320 Amps capacity with

heat shrinkable colored sleeves and I/C DMC/SMC bus bars

(a) 63 Amps, TPN, MCB - 6 Nos.

(b) 40 Amps, TPN, MCB - 4 nos

Panel complete as above Each 1 275000.00 275000.00

2 31.2 Supplying, Installation, Testing & Commissioning of

shall Variable Refrigerant

be filled with Flow/Variable

first charge of the refrigerant and

ready for use as required.

For Cooling or Heating or BothThe condenser should be coated

31.4 Supplying, Installation, testing and Commsioning of following

31.4.4 minimum

1.6Tr capacity 4 way Cassette Type Indoor Ceiling Mounted unit Nos. 8 39464 315712

2.3 31.13 Supplying, Installation, Testing and Commissioning of Y/T/Multi

31.13.1 Joints. Joints shall be of same Original Equipment Manufacturer

Indoor Units Each 35 4535 158725

31.13.2 Outdoor Multi Joint Each 15 8098 121470

2.4 31.14 Supplying, Installation, testing and commissioning including

31.14.1 vaccumiazation

6.4 mm dia (OD)and Nitrogen

(Soft drawn)testing of following

with tube thicknessnominal

1.2 mmsizes of Meter 150 256 38400

31.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 150 346 51900

31.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 170 487 82790

31.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 90 615 55350

31.14.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Meter 120 739 88680

31.14.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Meter 150 904 135600

31.14.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Meter 120 1068 128160

31.14.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Meter 150 1157 173550

31.14.9 31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62mm Meter 50 1222 61100

31.14.10 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62mm Meter 50 1286 64300

31.14.11 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62mm Meter 50 1322 66100

31.14.12 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Meter 50 1368 68400

C LIGHT FIXTURES

Digitally signed by MANISH

upply, Installation, Testing and Commissioning (SITC) of recessed

mounted LED downlighter of 15 Watt, suitable for operation on 230V

±10%, 50 Hz AC supply, comprising high-efficiency LED module with

minimum system efficacy of 100 lm/W, delivering minimum 1500

lumens, 4000K Neutral White, CRI ≥80, Power Factor ≥0.95, THD

≤10%, and non-dimmable constant current electronic LED driver,

complete with integral surge protection of minimum 2.5 kV.

The luminaire shall be fabricated from pressure die-cast aluminium

housing with powder-coated finish, high-purity aluminium reflector,

1 MR polycarbonate diffuser (where applicable), efficient heat sink, spring- 100 Nos. 1425.00 142500.00

loaded mounting clips and all necessary accessories for recessed

installation in false ceiling.

The LED driver shall be BIS approved, suitable for continuous

operation, with L70 life of minimum 50,000 burning hours, complete

with internal wiring, connectors, fixing accessories, testing,

commissioning and all labour, tools and tackles as per the

manufacturer's specifications and directions of the Engineer-in-

Supply, installation, testing and commissioning of 35 mm wide

suspended linear LED luminaire, 30W, 1200 mm length, non-

dimmable type, fabricated from extruded aluminium housing with multi

LED anti-glare system, system lumen output ≥3300 lm, luminaire

efficacy ≥110 lm/W, CRI >80, UGR <19, CCT 4000K neutral white,

2 MR rated life L70 ≥50,000 hours, with integral LED driver having 8 Nos. 8295.00 66360.00

protection against short circuit, miswiring, over voltage and surge

protection up to 3kV, PF ≥0.95, THD <10%, driver compliance with

IEC 62384/IEC 61547/IEC 61347-2-13, complete with suspension kit,

fixing arrangement and connection with 3x1.5 sq.mm FRLS copper

cable, complete as required.

Digitally signed by MANISH

LED Panel light 2x2 ft. (System lumen efficacy ≥105 85%, Operating

voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -

5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open

circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR

(Unified Glare Rating) < 19, Flicker free, (flicker should be below 5

%), life time (LED, Driver & electrical circuitry), of minimum 50000

Burning Hours with, 70% of initial Lumen maintained till life ends as

per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K /

5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour

Matching) 1.20 mm)

Supply, Installation, Testing and Commissioning (SITC) of LED

Flexible Strip Light having 20 Watt per metre power consumption,

comprising minimum 240 LEDs per metre mounted on flexible FR4

PCB with copper contacts, suitable for 12V DC constant voltage

operation, complete with electronic constant voltage LED

The strip shall have CCT 4000K (Neutral White), CRI ≥80, system

efficacy not less than 100 lm/W, beam angle 120°, IP20 (for indoor

applications) or IP65 where specified, with a minimum LED life of

50,000 burning hours (L70).

The item shall include constant voltage electronic SMPS/LED driver

(12V DC, 10A or suitable rating), aluminium mounting profile/channel

with opal diffuser wherever specified, mounting clips, connectors, end

caps, soldering, interconnecting FRLS copper wiring from driver to

strip, fixing accessories, testing, commissioning and all labour, tools,

tackles and consumables required for complete installation as per

manufacturer's specifications and directions of the Engineer-in-

Digitally signed by MANISH

Supply, Installation, Testing and Commissioning (SITC) of LED

Surface Mounted Cylindrical COB Downlight of 18 Watt capacity,

suitable for operation on 230V ±10%, 50 Hz AC supply, comprising

high-efficiency COB LED module with system efficacy not less than

100 lm/W, delivering minimum 1800 lumens, CCT 4000K (Neutral

White), CRI ≥80, beam angle 24°–36°, glare-controlled reflector, PF

≥0.95, THD ≤10%, surge protection minimum 2.5 kV, and driver

efficiency ≥85%.

The luminaire shall be fabricated from pressure die-cast aluminium

housing with powder-coated finish and high-performance heat sink for

efficient thermal management. The LED driver shall be constant

current, electronic, BIS-approved, having LM-80 tested LEDs and L70

life of minimum 50,000 burning hours.

The item shall include supply, fixing on ceiling, making electrical

connections with suitable FRLS copper leads up to the nearest

junction box/ceiling rose, all mounting brackets, connectors, screws,

fasteners, testing, commissioning and complete installation as per the

manufacturer's specifications and directions of the Engineer-in-

D FIRE ALARM SYSTEM

Supplying, installation, testing and commissioning of micro processor

based intelligent addressable main fire alarm panel, central

processing unit with the following loop modules and capable of

supporting not less than 240 devices (including detectors) and

minimum 120 detectors per loop and loop length up to 2 km, network

communication card, minimum 320 character graphics/ LCD display

with touch screen or other keypad and minimum 4000 events history

log in the non volatile memory (EPROM), power supply unit (230 ± 5

1 28.2.1 % V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free

batteries with automatic charger.The panel shall have facility to

connect printer to printout log and facility to have seamless integration

with analog/digital voice evacuation system (which is part of the

schedule of work under SH: PA System) and shall be complete with

all accessories . The panel shall be compatible for IBMS system with

open protocol BACnet/ Modbus over IP complete as per

specifications.

Digitally signed by MANISH

Supplying, installation, testing & commissioning of intelligent analog

2 28.2.4 addressable photothermal detector complete with mounting base 5 Nos. 3004.00 15020.00

complete as required.

Supplying, installation, testing & commissioning of response indicator

3 28.2.5 on surface/recessed MS Box having two LED,metallic cover complete 5 Nos. 306.00 1530.00

with all connections etc as required.

Supplying, installation, testing & commissioning of intelligent

addressable programmable sounder complete as required.

Supplying, installation, testing & commissioning of fault isolator

complete with base as required.

Supplying, installation, testing & commissioning of intelligent

6 28.2.9 addressable thermal detector with rate of rise cum fixed temperature 3 Nos. 2866.00 8598.00

thermistor complete with base as required

Supplying, installation, testing & commissioning of addressable

manual call point complete as required.

Supplying, installation, testing & commissioning of addressable strobe

complete as required.

Providing and fixing ISI Marked of approved make Fire Extinguishers

complete with all accessories as per manufacturer's specifications.

Providing and fixing ISI Marked Carbon Dioxide (CO₂) Fire

Extinguisher of 4.5 kg capacity, conforming to IS 15683 and IS 2878,

seamless steel cylinder, factory filled with CO₂ gas, complete with

squeeze grip operating valve, discharge horn, safety valve, carrying

handle, pressure-tested cylinder, wall mounting bracket, stainless

steel fasteners and all accessories. The extinguisher shall be suitable

for Class B fires and energized electrical equipment, complete with

installation, commissioning and demonstration, as per manufacturer's

specifications and directions of the Engineer-in-Charge.

Digitally signed by MANISH

Providing and fixing ISI Marked Mechanical Foam Fire Extinguisher of

9 litre capacity, stored pressure/cartridge operated type, conforming to

IS 15683, mild steel cylinder internally treated with anti-corrosive

coating, filled with AFFF foam concentrate and propellant, complete

9 MR with discharge hose, nozzle, squeeze lever operating valve, pressure

gauge (where applicable), wall mounting bracket, fasteners and all 4 NOS 4,200.00 16800.00

accessories. The extinguisher shall be suitable for Class A and Class

B fires, complete with installation, commissioning and demonstration,

as per manufacturer's specifications and directions of the Engineer-in-

Providing and fixing ISI Marked ABC Dry Chemical Powder Fire

Extinguisher of 6 kg capacity, stored pressure type, conforming to IS

15683, mild steel cylinder filled with Mono Ammonium Phosphate

(MAP) based ABC dry chemical powder, pressurized with dry nitrogen

gas, complete with pressure gauge, discharge hose, squeeze lever

operating valve, wall mounting bracket, stainless steel fasteners and 4 NOS 3489.00 13956.00

all accessories. The extinguisher shall be suitable for Class A, B, C

fires and electrical fires, complete with installation, commissioning and

demonstration, as per manufacturer's specifications and directions of

the Engineer-in-Charge.

Grand Total 4663190 1698938

Grand Total 4663190 1698938

Digitally signed by MANISH

BOQ FOR AUDITORIUM AV

Sno. DSR/ Description Qty UoM Unit Rate Total Rate

SITC of an Integrated Digital modium made of Mild Steel Material, Stand alone with Wheels & lock, Smooth round edge at the top ,Tray for

Keyboard | Single sliding tray with lock for protection of the Interactive Panel and Controller, Standard Rack to keep all the equipment and PC,

RFID Lock mechanism, Separate space for Vertical Desktop PC ,Two Door system – One for Rack and other for PC, PC door with small

window for On/Off, Front Door for Servicing, Lock Mechanism : lockable access using key and/or RFID/electronic access control for better

security and ease of use, Podium should have minimum following ports:1 x Power Plug, 2 x USB 2.0, 1 x HDMI, 1 x VGA, 1 x LAN, 1 x Mono, 1

1 MR x Audio Video. Connectivity Ports at the bottom 1 x LAN, 1 x VGA, 2 x HDMI, 1 x Power Plug, Mechanism for Goosneck Micrpohone x 1, 1 Nos ₹ 2,99,538.00 ₹ 2,99,538.00

Motorized Interactive panel with tilt options, Panel Type : Active Matrix Color Backlit LED | Display Size: 19” or higher; Resolution: 1920 x 1080

pixels;Lines Per Inch: 4000 lpi; Contrast: 1000:1; Input: HDMI In ; Technology: Electromagnetic - with Pen touch only; Interface: USB; Pressure

Sensitivity: 2048 Levels; Data Report: 180 reports / per second; Accuracy:±0.5mm; OS: Windows / Vista / Mac / Linux; Software Feature:

Should be able to Annotate on Blank and Power Point application with other applications.As per approved design by Engineer in charge.

SITC of active LED with 1.5mm pixel pitch or lower, SMD 3 in 1 LED technology, size: 3.8 X 2.16 m ( 5% deviation is allowed matching the

resolution),Minimum native resolution 2560 × 1440 or higher, Brightness: >800cd/m:Brightness ,Contrast ratio :5000:1 or better,Bit depth:16bit,

3840Hz Refresh Rate,HDR Compatible: HDR10+, Pixel configuration: RGB LED, Frame Rate: 60 Hz or higher, Lifespan: 100000 Hrs or

higher, Fanless and 24x7 operation, 150'(H)/150 °(V) Viewing Angle, Signal Transmission distance:CAT/ Fiber cable:<100m, Suitable wall

mounts and controller should be same OEM.Front serviceable module replacement without dismantling complete display with Factory color

2 MR calibration and support for on-site calibration. Controller Ports:RJ-45,RS-232 & USB, Video Inputs:Minimum 2 HDMI inputs and 1 DisplayPort 1 Nos ₹ 44,16,271.00 ₹ 44,16,271.00

or equivalent digital input, Outputs:RJ45/Fibre Optics, Resolution: 4k, HDCP compliant, Ethernet port: Min 1 x Gigabit, Should have signage

player inbuilt, Certifications:BIS, CE, FCC & UL. BIS to be provided seperately for both LED Wall & Controller. OEM must have ISO 9001:2015,

ISO 14001, ISO 45001. OEM must have a service centre in state/ city (as per location). Document required - legal service agreement, OEM

must have centralized call centre for service call logging. As per approved design by Engineer in charge.

SITC of professional-grade 55" display panel type IPS/VA with a native resolution of 3840x2160, a display response time of 8 ms or better, a

viewing angle of 178°, a color depth of 10/12 bits with 1.07 billion colours or higher, and a color gamut of 90% DCI-P3 or equivalent. The

screen hardware must feature an anti-glare (AG) panel surface,contrast ratio of 1200:1 or better, a dynamic contrast ratio of 300000:1 or

better, a typical brightness of 440 nits or higher,response time of < 8 ms or better, orientation: landscape / portrait, 24x7 Operation, Aspect

Ratio 16:9, display should support HDR10, HLG and Dolby Vision, Wi-Fi enable, 1x RJ45 port, HDCP2.3 complied, 3 x HDMI ports or higher,

USB2.0 x 2, control : RS232 x 1 and HDMI-CEC enable (HDMI Auto Wake up) features, Inbuilt Speakers 20W or higher, Certification: CE,

FCC, BIS, As per approved design by Engineer in charge. M. (Cabin x 4)-1F.

SITC of professional-grade 65" display panel type IPS/VA with a native resolution of 3840x2160, a display response time of 8 ms or better, a

viewing angle of 178°, a color depth of 10/12 bits with 1.07 billion colours or higher, and a color gamut of 90% DCI-P3 or equivalent. The

screen hardware must feature an anti-glare (AG) panel surface,contrast ratio of 1200:1 or better, a dynamic contrast ratio of 300000:1 or

better, a typical brightness of 440 nits or higher,response time of < 8 ms or better, orientation: landscape / portrait, 24x7 Operation, Aspect

Ratio 16:9, display should support HDR10, HLG and Dolby Vision, Wi-Fi enable, 1x RJ45 port, HDCP2.3 complied, 3 x HDMI ports or higher,

USB2.0 x 2, control : RS232 x 1 and HDMI-CEC enable (HDMI Auto Wake up) features, Inbuilt Speakers 20W or higher, Certification: CE,

FCC, BIS, As per approved design by Engineer in charge.

Digitally signed by MANISH

SITC of professional-grade 43" display panel type IPS/VA with a native resolution of 3840x2160, a display response time of 8 ms or better, a

viewing angle of 178°, a color depth of 10/12 bits with 1.07 billion colours or higher, and a color gamut of 90% DCI-P3 or equivalent. The

screen hardware must feature an anti-glare (AG) panel surface,contrast ratio of 1200:1 or better, a dynamic contrast ratio of 400000:1 or

better, a typical brightness of 440 nits or higher,response time of < 8 ms or better, orientation: landscape / portrait, 24x7 Operation, Aspect

Ratio 16:9, display should support HDR10, HLG and Dolby Vision, Wi-Fi enable, 1x RJ45 port, HDCP2.3 complied, 3 x HDMI ports or higher,

USB2.0 x 2, control : RS232 x 1 and HDMI-CEC enable (HDMI Auto Wake up) features, Inbuilt Speakers 20W or higher, Certification: CE,

FCC, BIS, As per approved design by Engineer in charge.

SITC of Tilt height adjustment Pole for 55 inch display with Tilt:+7.5° / -20°, Orientation: landscape, suitable for 55" - 100" (1397mm -

2540mm), weight capacity: 300lbs or higher, As per approved design by Engineer in charge.

SITC of Digital Audio DSP with 32-bit fixed/floating-point DSP High-performance 32-bit DSP processor with adequate processing capability to

support all specified audio functions, Balanced Analog I/O – Min.12 inputs (routable to AEC) or higher, Min. 8 outputs or higher, Minimum 4

configurable GPIO ports or minimum 5 GPIO ports expandable general-purpose control, Network Port – Interfaces with 3rd party control, Dante

Network Port – 64 x 64 channel, 1 Gbps, USB Port – Micro-B USB for PC soft codecs with stereo input and output, 8-channel uncompressed,

ultra-low latency digital audio, Serial Port – 3-wire RS-232C serial interface connection, user controls, Dynamic Range > 115 dB or higher, A-

weighted 20 Hz – 20 kHz, analog input to analog output; Maximum Input Level +24 dBu; Equivalent Input Noise -118 dB at 48 dB gain setting;

Phantom Power +48 VDC, 10 mA, selectable per input; Output Channels 8 balanced, line level As per approved design by Engineer in charge.

SITC of a Class D Programmable DSP based amplifier with Minimum 4 × 300 W output channels, capable of driving low impedance and/or

constant voltage speaker systems, Speaker processing, routing, level control, delays, limiters, input and area EQs for signal processing,

Support for low impedance (4/8 Ω) and constant voltage (70V/100V) speaker systems, individually configurable per channel, Frequency

Response : 20Hz - 20kHz for LZ mode; Dynamic range> 100dBA and THD <0.04% at rated output complete with standard accessories as

required. Balanced audio input/output connectors (Phoenix/Euroblock or equivalent). Shall be able to support Controller for source selection

and volume control or multiple controllers for just the volume control. As per approved design by Engineer in charge.

SITC of Class D amplifier with 2 Channels of Load independent 1000W outputs, Support for low impedance (4/8 Ω) and constant voltage

(70V/100V) speaker systems, individually configurable per channel.; Frequency Response : 20Hz - 20kHz for LZ mode; Dynamic range>

9 MR 100dBA and THD <0.04% at rated output complete with standard accessories as required. Balanced audio input/output connectors 1 Nos ₹ 3,54,000.00 ₹ 3,54,000.00

(Phoenix/Euroblock or equivalent). As per approved design by Engineer in charge.

SITC of stackable Wall Mount Column Array loudspeaker with Multiple full-range drivers (minimum 8 or equivalent) capable of achieving the

specified acoustic performance in an Engineered driver array providing controlled directivity for wide horizontal dispersion of above 150

degrees and controlled vertical dispersion of 20 degrees or lower. Free field frequency range (-10dB) of 60Hz to 16kHz; RMS continuous

power handling of 150W better; full range Sensitivity of 87 Db SPL; Max SPL of 109 dB SPL (115dB peak); Nominal Impedance of 8 ohms;

10 MR Rugged enclosure with powder coated steel grille. Compatible 70V/100V line transformer module, supplied by OEM or recommended by OEM. 4 Nos ₹ 2,63,230.00 ₹ 10,52,920.00

including Transformer converts 70V/100V high-voltage signals to run column speakers over long distances without power loss. As per

approved design by Engineer in charge.

Digitally signed by MANISH

SITC of professional high-performance passive subwoofer utilizing a minimum 15-inch (381 mm) high-excursion low-frequency transducer

engineered for extended low-frequency reinforcement and high acoustic output. The subwoofer shall provide a frequency response of 40 Hz –

100 Hz (-3 dB) and an operating frequency range of 35 Hz – 130 Hz (-10 dB) or better with omnidirectional coverage characteristics. The unit

shall support a minimum AES continuous power handling of 500 Watts and peak power handling of 2800 Watts or higher, with a nominal

impedance of 8 Ohms. The loudspeaker shall deliver a minimum continuous SPL of 117 dB and peak SPL of 124 dB (free-field) or better. The

11 MR enclosure shall be constructed from premium-grade High-strength plywood enclosure (minimum 15–18 mm) or equivalent acoustically inert 2 Nos ₹ 3,59,627.00 ₹ 7,19,254.00

material. with extensive internal bracing for enhanced structural rigidity and reduced cabinet resonance. The cabinet shall feature a durable

polyurethane textured finish, heavy-duty powder-coated steel grille, integrated rigging/mounting provisions, and professional locking

Professional locking speaker connectors (NL4/SpeakON or equivalent) connectors with parallel loop-through capability. As per approved

design by Engineer in charge.

SITC of Full HD 1080p @ 60 frames per second PTZ Camera with minimum 20X Optical Zoom and FoV of minimum 55 deg or higher, min 255

Presets.Camera should support simultaneous outputs through Ethernet, HDMI, 3G-SDI/USB 3.0, Audio In and can be controlled via RS232 &

422 In & Out & IP.Panning angle -170° ~ +170°, Tilting angle -30° ~ +90° . The tilting and panning speed of camera should be minimum 100°

per second. Camera should support SRT, PoE and UVC-compliant USB or Virtual USB Driver.Camera can be controlled and managed

through centralised software on network. Quoted model should be BIS, CE, FCC & RoHS Certified with Test Lab Reports. As per approved

design by Engineer in charge.

SITC of Full HD PTZ Camera supporting 1080p at 60 Frames per Second, minimum 12X Optical Zoom with FoV of minimum 70 degree and

minimum 255 presets. Camera should support simultaneous outputs through HDMI, USB 3.0 & IP with Audio In and controllable via

RS232/422 and IP. Panning angle -170° ~ +170° , Tilting angle -30° ~ +90. Camera should support SRT, PoE & should be compatible with

USB UVC/UAC compliant or Virtual USB Driver. Camera can be controlled and managed through centralised software on network. Quoted

model should be BIS, CE, FCC & RoHS Certified with Test Lab Reports.As per approved design by Engineer in charge.

SITC of capture appliance shall be a dedicated hardware-based recording and streaming solution supporting a minimum of 4 HDMI inputs and

IP camera/RTSP sources. The system shall support Full HD 1080p recording and live streaming up to 60 fps using H.264 or equivalent

industry-standard compression codec, with simultaneous recording, streaming, and content archiving capabilities.The unit shall provide

Support multiple configurable layouts including single view, picture-in-picture, picture-by-picture and multi-window layouts modes, along with

graphic overlays, custom backgrounds, and scene switching. It shall feature minimum 1 TB internal storage, HDMI and audio embedding/de-

embedding, Gigabit Ethernet, RS-232/RS-485 control, USB connectivity, and support Support standard streaming and file transfer protocols

including RTMP/RTMPS, RTSP and network storage (NAS/FTP/SFTP or equivalent).. The appliance shall be suitable for lecture halls,

auditoriums, training centers, and hybrid learning environments requiring professional recording, live streaming, and content management.As

per approved design by Engineer in charge.

SITC of The IP camera controller shall be a professional hardware-based PTZ control system capable of Support control of multiple IP PTZ

cameras (minimum 100 cameras) through Ethernet infrastructure. The controller shall feature a precision 3-axis joystick, dedicated controls for

Pan, Tilt, Zoom, Focus, Iris, White Balance, Exposure, and programmable user function keys for rapid camera operation. The unit shall support

15 MR real-time RTSP video preview on an integrated LCD display and provide control interfaces including Ethernet, RS-232, and RS-422. The 1 Nos ₹ 2,45,077.00 ₹ 2,45,077.00

controller shall support industry-standard VISCA, VISCA over IP, and compatible PTZ camera control protocols, enabling centralized operation

of multiple cameras for auditorium, As per approved design by Engineer in charge.

Digitally signed by MANISH

SITC of a professional-grade wireless handheld microphone system comprising a Professional digital UHF wireless microphone system single-

channel receiver and a matching rugged metal body handheld transmitter integrated with an industry-standard dynamic cardioid capsule. The

complete system must operate over a wide Minimum RF tuning bandwidth of 40 MHz or wideband frequency agility. supporting up to Minimum

20 simultaneous compatible channels or support multiple simultaneous channels., delivering a digital audio resolution with Minimum 115 dB

16 MR dynamic range and a line-of-sight range of 100 meters. The receiver must feature a high-contrast LCD screen, guided frequency setup, True 4 Nos ₹ 1,27,077.00 ₹ 5,08,308.00

diversity or equivalent diversity reception technology., and an RJ45 Ethernet port for networked control and multi-channel frequency

coordination via manufacturer software. Most critically, both the transmitter and receiver must incorporate an advanced hardware-level. As per

approved design by Engineer in charge.

SITC of a professional digital wireless lapel microphone system comprising a Professional digital UHF wireless microphone system. single-

channel receiver paired with a lightweight Rugged bodypack transmitter with durable metal or high-impact engineered enclosure. and a

premium cardioid condenser lavalier microphone. The system must utilize true True diversity or equivalent diversity reception technology.

across a Minimum 40 MHz RF tuning bandwidth or wideband frequency agility. to ensure flawless signal stability up to 100 meters, featuring a

4-pin mini connector/ Professional locking miniature microphone connector. mic interface and a speech-tailored frequency response of 50 Hz

to 17,000 Hz. The receiver unit must support an integrated RJ45 Ethernet network interface for automated group scans and remote

configuration via native system utilities. As per approved design by Engineer in charge.

SITC of a professional 18-inch (45.7 cm) dual-flex miniature electret condenser gooseneck microphone tailored specifically for podium speech

pickup, featuring an interchangeable capsule design with an included cardioid polar pattern. The microphone must deliver a wide dynamic

range of \(\ge \)96 dB and a flat frequency response spanning 50 Hz to 17,000 Hz to ensure highly accurate vocal reproduction. It must utilize

an attached active balanced, transformerless preamplifier circuit to guarantee maximum immunity to electromagnetic hum and noise over long

cable lengths, requiring standard 11 to 52 Vdc phantom power for operation. Crucially, the microphone must feature manufacturer-certified

Integrated RF interference suppression/filtering for immunity against mobile phones and wireless devices. to strictly reject radio frequency

interference caused by nearby smart smartphones and wireless devices. Additionally, the complete assembly must be supplied with a snap-fit

foam windscreen, a locking flange mount for permanent surface placement, and an integrated vibration/shock isolation mount to minimize

handling and surface-borne noise against surface vibration, As per approved design by Engineer in charge.

SITC of a professional-grade 8x8 HDMI 2.0 Matrix Switcher supporting native resolutions up to 4096x2160@60Hz with a continuous data rate

of 18 Gbps, a 600 MHz pixel clock, HDR, 3D, and Deep Color up to 12-bit. It must provide embedded digital audio on all inputs, integrated

hardware-level audio de-embedding routed to \(\ge \)2 analog line-level outputs, and full HDMI pass-through for multi-channel formats

including LPCM up to 7.1/192 kHz, Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio. The system must incorporate automatic

output re-clocking, comprehensive built-in EDID management, and user-selectable HDCP 2.3 authorization control per input on a fixed or

19 MR modular chassis featuring front panel LED signal status indicators. For advanced operations, the unit must be manageable via RS-232, CEC, 1 Nos ₹ 9,30,566.00 ₹ 9,30,566.00

and front panel buttons, alongside an integrated female RJ-45 Ethernet port supporting secure protocols such as DHCP, DNS, HTTP, HTTPS,

ICMP, IEEE 802.1X, NTP, SFTP, SMTP, SNMP, SSH/TLS/SSL, TCP/IP, Telnet, and UDP/IP. Additionally, the device must feature an eco

power-saving mode or a redundant power supply, operate reliably within a 0 to +50 °C temperature threshold, and hold global CE, UL, and

RoHS safety certifications.As per approved design by Engineer in charge.

Digitally signed by MANISH

SITC of a rack mountable, twisted pair transmitter featuring 1x HDMI video input and 1x Twisted pair on RJ 45 port video output. The device

must support a resolution of 4K @60, or better, with a data rate of 10.2 Gbps or better, and achieve a transmission distance of 70 Mtr or more

over shielded twisted pair cable. For system management, it must include control input featuring 1 or more RS232 and 1 or more IR to control

remote device, while ensuring HDCP 2.3 or better compliance. Operationally, the transmitter should support both local power supply and

remote powering, feature front panel LED indication for power and signal status, and maintain a Low power consumption (maximum 10 W),

Additionally, the unit must operate within a temperature range of 0 to +50 °C or better, meet CE, UL, RoHS compliance, and shall be provided

with under table mounting accessories.As per approved design by Engineer in charge.

SITC of a rack mountable, twisted pair receiver with audio output featuring 1x Twisted pair on RJ 45 port video input and 1x Analog stereo

balanced/unbalanced audio output. The audio performance must deliver a frequency response of 20 Hz to 20 kHz, ±0.5 dB or better, with a

S/N Ratio of >90 dB or better. The device must feature 1x HDMI video output, supporting a resolution of 4K@60, or better, with a data rate of

10.2 Gbps or better, and achieve a transmission distance of 70 Mtr or more over shielded twisted pair cable. For system management, it must

21 MR include control input featuring 1 or more RS232 and 1 or more IR to control remote device, while ensuring HDCP 2.3 or better compliance. 6 Nos ₹ 75,284.00 ₹ 4,51,704.00

Operationally, the receiver should support both local power supply and remote powering, feature front panel LED indication for power and

signal status, and maintain Low power consumption (maximum 10 W). Additionally, the unit must operate within a temperature range of 0 to

+50 °C or better, and meet CE, UL, RoHS compliance.As per approved design by Engineer in charge.

SITC of 1 or more HDMI 2.0 inputs and 2 or more HDMI 2.0 outputs video configuration. The device must support a resolution of 4K@60,

4:4:4, with a data rate of 18 Gbps, and support HDR,Deep Color support as per HDMI 2.0 specification (up to 12-bit or equivalent). For audio

routing, it must include 1x Embedded on HDMI inputs audio input and 2xEmbedded on HDMI audio output. The system architecture must

22 MR incorporate built in EDID management and remain HDCP 2.3 or better compliant. Structurally and operationally, the unit must feature front 2 Nos ₹ 1,02,242.00 ₹ 2,04,484.00

panel LED indication for power and signal status, perform reliably within an operating temperature range of 0 to +50°C or better, and meet CE,

UL, RoHS compliance.As per approved design by Engineer in charge.

SITC of a Compact rack-mountable HDMI switcher (half-rack or equivalent). 2-input HDMI switcher designed for digital video and embedded

multi-channel digital audio signals, supporting native computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling.

The switcher must comply with HDMI 2.0b specifications, delivering data rates up to 18 Gbps, , and HD lossless audio formats, while ensuring

strict HDCP 2.3 compliance. It must incorporate an Automatic input equalization suitable for the specified video resolution and cable length. for

4K/60 signals when used with compatible premium cables, alongside a proprietary advanced Automatic EDID management system to

automatically maintain continuous EDID communication between connected devices. Operationally, the device must feature front panel

buttons, a USB mini-B configuration port, front panel LED indicators for immediate visual confirmation of HDCP authentication and signal

presence, and support extensive control protocols including 10/100Base-T Ethernet control, RS-232, auto-input switching, and a dedicated

contact closure remote control interface with tally output capability, As per approved design by Engineer in charge.

SITC of a high-performance, Quad core, AV control processor with specified control ports, advanced security standards and dual Gigabit

Ethernet network port for guest network separation during control monitoring, compatibility with touch panel, button panel of OEM using a

standard network infrastructure. The hardware connectivity must feature one or more bidirectional RS-232 ports, one or more bidirectional RS-

232/RS-422/RS-485 ports, one or more IR/Serial ports, two or more low voltage relay ports, four or more Digital I/O port, and one or Serial

expansion interface for OEM-supported accessories. to connect accessories for control system expansion. The system must support

compatibility with touch panel, button panel of same OEM, and be equipped with a memory capacity of 8 GB or more Flash and 2 GB or more

SDRAM. For network operations, it must incorporate 1 or more 10/100/1000Base-T Ethernet port for monitoring and control minimum up to 30

or more devices, strictly supporting ethernet protocols including DHCP, DNS, HTTP, HTTPS, IEEE 802.1X, NTP, SFTP, SMTP, SNMP, SSH,

TCP/IP, and UDP/IP. Additionally, the processor must feature a built In or external IR Learner to capture IR commands, function reliably within

an operating temperature range of 0 to +50 °C, and maintain CE, UL, RoHS compliance.As per approved design by Engineer in charge.

Digitally signed by MANISH

SITC of a 10” or bigger color capacitive touch screen with minimum 1280 x 800 resolution Integrated Ethernet port compatible with control

processors, and shall be supplied with suitable table mount accessories, supporting PoE power and supplied with suitable PoE injector or PoE

network switch. The screen type must feature an active matrix TFT color display with fast quad-core processor for smooth processing,

delivering a brightness of 350 Nits or better, a contrast of 800:1 or better, and a color depth of 24 bit, 16.7 million colors or higher. The display

must provide a viewing angle of ±80° horizontal, ±80° vertical or better, and be backed by a memory capacity of min 2GB SDRAM or better,

25 MR and min 8 GB flash memory or better. For advanced environment interaction, it must incorporate a built in light and motion sensor, alongside 1 Nos ₹ 4,25,744.00 ₹ 4,25,744.00

an audio output featuring a built in speaker for touch feedback. For network infrastructure connectivity, the device must support ethernet

protocols including DHCP, DNS, HTTP, HTTPS, ICMP, IEEE 802.1x, SFTP, SSH, TCP/IP, UDP/IP, and the touch panel should support PoE

and supply with POE injector or compatible POE network switch. Additionally, the unit must operate reliably within a temperature threshold of 0

to +40 °C or better, and maintain BIS, CE, UL, RoHS compliance.As per approved design by Engineer in charge.

SITC of a 8 Ports POE+ with 2x1G & 2x1G SFP uplink L3 switch, with minimum 1.25Ghz 32-Bit, 2GB RAM, Packet buffer memory: 16 MB,

Flash Memory: 256Mb, Switching fabric: 24 Gbps Line-Rate (non blocking fabric), Throughput : Min. 17.86 Mpps, Latency <2.27µs 1G, IP

Multicast Routing Entries : 512 IPv4 & 128 IPv6, Address database size: 16,000 MAC addresses, Number of VLANs: 4,093 (IEEE 802.1Q)

simultaneously, Jumbo Frames Up to 12K, Multicast IGMP Group membership : 2K IPv4 & 2K IPv6, DHCP Server: IPv4: 256 pools IPv6: 16

pools, Software-controlled fan adjustments, Pre-configured for audio and video over IP out of the box with zero touch configuration for audio,

profiles for Dante, Support for AV-over-IP protocols including Dante and/or AES67. AVB lincese should be configurable, Auto-Trunk and Auto-

LAG,static, RIP and PIM-SM, DM and SSM multicast routing, DHCP Server and Pv2 Transparent Clock, Industry standard SNMP, RMON,

MIB,LLDP, AAA, sFlow, RSPAN and PTPv2, Efficient authentication tiering with successive DOT1X, MAB and Captive Portal methods for

streamlined BYOD, Voice VLAN with SIP, H323 and SCCP protocols detection and LLDP-MED, Advanced IPv4/IPv6 security implementation

including malicious code detection, DHCP Snooping, IP Source Guard protection and DoS attacks mitigation, GARP with GVRP/GMRP,

Multicast VLAN Registration Protocol (MVRP), Broadcast, Unicast, Multicast DoS Protection, DHCP Snooping, IP Source Guard and DoS

Protection,802.1x MAC Address Authentication Bypass (MAB), IEEE 802.1x Radius Port Access Authentication, IEEE 1588 PTPv2, IEEE

802.1BA-2011 Audio Video Bridging (AVB), Temperature:32° to 113°F (0° to 45°C), certifications:CE: EN 55032:2015, Class A; EN61000-3-

2:2014, Class A; EN 61000-3-3-:2013; EN 55024:2010; EN55035:2017, CB report/Certificate: IEC 62368-1 Ed.2; IEC 60950-1 Ed.2 Am2; CE:

EN 62368-1:2014, BSMI: CNS 13438, Class A, RCM: AZ/NZS 62368.1:2018, FCC: 47 CFR FCC Part 15, Class A; ANSI C63.4:2014 As per

approved design by Engineer in charge.

SITC of Dual Band PoE Multi-Gig Insight Managed WiFi 6 Access Point ( 2x2 in 5.0GHz; 2x2 in 2.4GHz),IEEE 802.11AX,IEEE 802.11ac,IEE

802.11n,5GHz: 1200Mbps; 2.4GHz: 600Mbps, Wireless MultiMedia Prioritization,Wireless Distribution System, Power over Ethernet (PoE)

IEEE 802.3af/802.3at, Wi-Fi Protected Access (WPA3), Wired Equivalent Privacy (WEP) 64-bit, 128-bit, and 156-bit encryption, Wireless

access control to identify authorized wireless network devices, MAC address filtering with access control, Basic Service Set Coloring (BSS

Coloring Security Socket Layer (SSL) remote management login, Network Management:Remote configuration and management through Web

browser, SNMP or Telnet , Target Wake Time (TWT), Block SSID Broadcast, Bidir and MU-MIMO, Certificates:Health & Safety: EN 62368-

v2.1.1 (2017-05), Cybersecurity: EN 18031-1:2024, EN 18031-2:2024, TEC under Mandatory Testing and Certification of Telecom Equipment

certificate, WPC Certified. As per approved design by Engineer in charge.

SITC of a all required AV, control, audio, video, network, and power cables along with associated connectors, adapters, termination

accessories, cable management hardware, labeling, ferrules, lugs, heat-shrink sleeves, cable ties, mounting accessories, and consumables as

required for complete integration and satisfactory operation of the system. The lot shall include all interconnections between equipment, field

devices, racks, displays, microphones, speakers, control interfaces, and network infrastructure, irrespective of quantity, to deliver a fully

functional turnkey solution.

Grand Total of Auditorium ₹ 1,49,07,167.00

Grand Total of Auditorium ₹ 1,49,07,167.00

Digitally signed by MANISH

AV CONFERENCE HALL - 3F

Sno. Description Qty UoM Unit Rate Total Rate

Conference Room

SITC of professional-grade 98" display panel type VA/IPS with a native resolution of 3840x2160, a display response time of 8 ms or better, a viewing angle of

178°, a color depth of 10/12 bits with 1.07 billion colours or higher, and a color gamut of 90% DCI-P3 or equivalent. The screen hardware must feature an anti-

glare (AG) panel surface,contrast ratio of 5000:1 or better, a dynamic contrast ratio of 600000:1 or better, a typical brightness of 700 nits or higher,response time

of < 8 ms or better, orientation: landscape / portrait, 24x7 Operation, Aspect Ratio 16:9, display should support HDR10, HLG and Dolby Vision, Wi-Fi enable, 1x

RJ45 port, HDCP2.3 complied, 3 x HDMI ports or higher, USB2.0 x 2, control : RS232 x 1 and HDMI-CEC enable (HDMI Auto Wake up) features, Inbuilt Speakers

20W or higher, Certification: CE, FCC, BIS, As per approved design by Engineer in charge.

SITC of professional-grade 65" display panel type IPS/VA with a native resolution of 3840x2160, a display response time of 8 ms or better, a viewing angle of

178°, a color depth of 10/12 bits with 1.07 billion colours or higher, and a color gamut of 90% DCI-P3 or equivalent. The screen hardware must feature an anti-

glare (AG) panel surface,contrast ratio of 1200:1 or better, a dynamic contrast ratio of 300000:1 or better, a typical brightness of 440 nits or higher,response time

of < 8 ms or better, orientation: landscape / portrait, 24x7 Operation, Aspect Ratio 16:9, display should support HDR10, HLG and Dolby Vision, Wi-Fi enable, 1x

RJ45 port, HDCP2.3 complied, 3 x HDMI ports or higher, USB2.0 x 2, control : RS232 x 1 and HDMI-CEC enable (HDMI Auto Wake up) features, Inbuilt Speakers

20W or higher, Certification: CE, FCC, BIS, As per approved design by Engineer in charge.

SITC of 21.5-inch retractable LCD touch monitor, purpose-built for conference room applications requiring a modern and concealed AV solution. The lift

mechanism shall use a motorized lift mechanism or chain transmission system with smooth, silent motorized operation, and provide 0° to 60° tilt adjustment to

optimize user comfort. Integrated control shall be possible via front touch panel, handheld remote, RS-485, or centralized automation systems, with clear preset

3 functionality for lift up, stop, and down positions. The monitor shall be housed in a high-grade aluminum alloy chassis with matt silver frame or as per Engineer-in- 1 Nos ₹ 3,55,815.00 ₹ 3,55,815.00

charge, ensuring both strength and a premium appearance. Power shall be managed via auto ON/OFF function synchronized with lift movement. Interfaces shall

include HDMI, VGA, USB, RJ45 for RS-485, analog/digital audio, enabling broad compatibility with conferencing systems. Available in black or silver finish or as

per Engineer-in-charge, the design shall be slim and compact for flush table installation. As per approved design by Engineer in charge.

SITC of Full HD 1080p @ 60 frames per second PTZ Camera with minimum 20X Optical Zoom and FoV of minimum 55 deg or higher, min 255 Presets.Camera

should support simultaneous outputs through Ethernet, HDMI, 3G-SDI/USB 3.0, Audio In and can be controlled via RS232 & 422 In & Out & IP.Panning angle -

170° ~ +170°, Tilting angle -30° ~ +90° . The tilting and panning speed of camera should be minimum 100° per second. Camera should support SRT, PoE and

UVC-compliant USB or Virtual USB Driver.Camera can be controlled and managed through centralised software on network. Quoted model should be BIS, CE,

FCC & RoHS Certified with Test Lab Reports. As per approved design by Engineer in charge.

SITC of Full HD PTZ Camera supporting 1080p at 60 Frames per Second, minimum 12X Optical Zoom with FoV of minimum 70 degree and minimum 255

presets. Camera should support simultaneous outputs through HDMI, USB 3.0 & IP with Audio In and controllable via RS232/422 and IP. Panning angle -170° ~

5 +170° , Tilting angle -30° ~ +90. Camera should support SRT, PoE & should be compatible with USB UVC/UAC compliant or Virtual USB Driver. Camera can be 2 Nos ₹ 1,99,692.00 ₹ 3,99,384.00

controlled and managed through centralised software on network. Quoted model should be BIS, CE, FCC & RoHS Certified with Test Lab Reports.As per

approved design by Engineer in charge.

SITC of Video Mixer cum Processor which can enable Voice Tracking through PTZ Cameras integrated with Ceiling Tiles on IP or with ceiling microphone array(s)

or network-based ceiling microphone(s). The Processor should be capable of connecting minimum support for multiple networked ceiling microphone arrays

(minimum 8 microphone zones or equivalent) with 4x IP based PTZ Cameras for Quadview output and Auto Switching . The processor should have USB-C &

HDMI Output. Quoted model should be BIS, CE, FCC & RoHS Certified with Test Lab Reports. As per approved design by Engineer in charge.

SITC of a Camera wall/ceiling mount metal stand. It should be constructed with durable material and can be attached right side up or upside down, depending on

7 camera configuration and requirment. OEM accessory will give a perfect fit and features pre-drilled installation hardware and cable holes. 3 Nos ₹ 7,450.00 ₹ 22,350.00

Digitally signed by MANISH

SITC of ceiling-mounted network array microphone should provide Automatic Coverage for seamless pickup of desired areas or Steerable Coverage supporting

up to eight independent zones. Talker coverage should be customisable and switchable as per the seating layout. Multiple talkers around the room should be

covered simultaneously.Tile mic having total of up to multiple Dante/AES67 output channels channels, including individual outputs, automix, and AEC reference.

The device shall operate on Power over Ethernet (PoE Class 0) with a maximum power consumption of 10.1 W, use Cat5e or higher shielded cable, and feature

an RJ45 network connector. It shall include beamforming ceiling microphone array with a frequency response of 125 Hz to 20 kHz, 48 kHz sampling rate, 24-bit

depth.Tile Mic should be able to cover minimum 900 Sq. Feet. The microphone should have integrated DSP, featuring automatic mixing, acoustic echo

8 cancellation (AEC) with up to 250 ms tail, noise reduction, automatic gain control, compression, delay, 4-band parametric EQ, mute, and a 140 dB gain range. It 3 Nos ₹ 8,83,275.00 ₹ 26,49,825.00

shall provide real-time positional XYZ data for camera tracking and support virtual acoustic boundaries to limit off-area pickup. The unit shall feature IP5X dust-

protected construction, with the square variant compliant to UL 2043 for installation in air-handling (plenum) spaces. Configuration shall be supported through

dedicated software or built-in web interface, and the device shall be fully certified for major VC/UC platforms such as Microsoft Teams, Zoom Rooms, and other

leading conferencing environments, ensuring seamless interoperability and high-quality room audio performance.Tile Mic should have LED Status Indicator for

On/Off, Mute/Unmute during VC/UC. System should include physical mute button to mute and unmute tile mic during VC , should be PoE powered and should be

able to receive and send TCP/IP command Tile Mic should include mounting kit as per site condition. As per approved design by Engineer in charge.

SITC of a Audio Conferencing DSP Processor shall be a compact, PoE+ powered digital signal processor designed for professional AV conferencing applications.

It shall support a minimum of 10 Dante network audio channels, 2 analog audio inputs, USB audio connectivity, and mobile device integration. The processor shall

feature advanced DSP functions including Acoustic Echo Cancellation (AEC), Automatic Gain Control (AGC), Noise Reduction, Intelligent Automatic Mixing,

Matrix Mixing, Parametric Equalization, Delay, and Compression to ensure clear and echo-free communication. The unit shall provide flexible signal routing

between network, analog, USB, and mobile audio sources, support rapid deployment through preconfigured presets, and be suitable for installation in meeting

rooms, boardrooms, and unified communication environments without requiring an external power supply.As per approved design by Engineer in charge.

SITC of loudspeaker shall be a networked PoE+ powered ceiling-mounted loudspeaker with an integrated Class-D amplifier and native Dante/AES67 digital audio

networking capability. The loudspeaker shall provide a frequency response of 70 Hz–20 kHz or better, support low-latency network audio transport, remote

monitoring, configuration, and firmware management through a centralized software platform. The system shall be optimized for speech intelligibility, conferencing,

and collaboration spaces, and shall include all necessary ceiling mounting hardware including tile bridge support. As per approved design by Engineer in charge.

SITC of a PoE-powered Dante active line array speaker equipped with 8 high-performance drivers or higher that deliver clear, directional audio. Designed

11 specifically for corporate conference rooms and lecture halls, it seamlessly integrates into IP networks via a single Ethernet cable for both power and audio 2 Nos ₹ 1,39,784.00 ₹ 2,79,568.00

distribution.As per approved design by Engineer in charge.

SITC of wireless microphone transceiver shall connect to the system through a single Ethernet cable. The system shall support scalable configurations of up to 80

compatible channels in SD mode and minimum 80 simultaneous compatible wireless channels or equivalent channels in HD mode. It shall feature bi-directional

wireless communication, providing return-channel audio to wireless transmitters and enabling real-time remote control of all wireless microphone settings. The

system shall include automated frequency coordination, capable of scanning available spectrum, assigning clean frequencies automatically, and dynamically

moving channels away from unexpected interference. The transceiver shall support Dante™ and AES67 digital networked audio, transporting low-latency digital

audio over Cat5e cable to any Dante-enabled device. It shall provide AES-256 encrypted wireless transmission for secure operation and offer selectable RF

output power to optimize spectrum usage based on the required operating range. The system shall include a compatible charging solution or built-in networked

charging station, making it an all-in-one wireless microphone solution suitable for conferencing and higher-education environments. The nominal working range

shall be up to 45 m (150 ft) outdoors with line-of-sight between the user and access point, subject to RF power settings, absorption, reflections, and interference.

The audio frequency response shall be 30 Hz to 19 kHz (+0.5 dB / -3 dB), dependent on microphone type handheld, lapel or boundary, with 24-bit / 48 kHz digital

audio processing. The unit shall provide analog inputs. The dynamic range shall be 115 dB (A-weighted) and 113 dB (unweighted). Equivalent input noise shall be -

87 dBV (A-weighted) for line input and -99 dBV (A-weighted) for aux input.The system shall provide analog outputs with maximum output levels of +17 dBV (line),

+6 dBV (aux), and -13 dBV (mic). THD+N shall be 0.02% typical, Power shall be supplied via USB-C (4.5 V – 5.5 V DC, 2500 mA) with a typical power

consumption of 12.5 W. The network interface shall consist of dual RJ45 Gigabit Ethernet ports supporting Dante digital audio, and the docking interface shall

provide 5 V / 0.5 A output.The receiver supports both Dante and analog audio interfacing for integration with modern or legacy systems and includes a integrated

digital audio mixer with Dante, analog, and USB audio I/O. It also features Acoustic Echo Cancellation (AEC), Noise Reduction (NR), Automatic Gain Control

(AGC), and Parametric EQ (PEQ) for optimal audio performance. A web-based GUI is preferred for configuration, and mute sync with video conferencing systems

enhances workflow during calls and System shall be Certified with Microsoft Teams and Zoom calls. As per approved design by Engineer in charge.

Digitally signed by MANISH

SITC of of handheld wireless transmitter designed for professional conferencing and presentation applications, featuring lightweight yet durable construction with

integrated diversity antennas to ensure strong and stable RF performance regardless of hand placement. Wireless Transmitter can work simultaniously across

80/160 compatible channels in Standard Density mode.The transmitter shall support interchangeable microphone cartridges, offering multiple vocal options to suit

varying speech reinforcement requirements. It shall operate using bi-directional wireless technology, enabling real-time remote adjustment of microphone

parameters, cues, or program audio. A programmable mute function shall allow customization of local or remote muting behavior, including push-to-talk, push-to-

mute, and external control. The device shall provide reliable wireless coverage up to 45 meters and shall include an audible warning when approaching the limit of

13 RF range. Channel assignment shall be supported through automatic channel assignment through charging dock and/or software.. Wireless communication shall 2 Nos ₹ 1,23,595.00 ₹ 2,47,190.00

employ AES-256 encryption for secure audio transmission. The transmitter shall use an intelligent lithium-ion battery capable of providing up to 24 hours of

continuous operation minimum, with full recharge achievable in approximately 3.5 hours, and support remote network monitoring of runtime and charge status. An

integrated LCD display shall provide operational status, battery information, and RF monitoring for multiday use. USB-C charging shall be supported for

continuous “always-on” operation.

The microphone capsule shall be a dynamic moving-coil type designed for professional speech and vocal reinforcement applications. Frequency response ranging

from 50 Hz to 16,000 Hz, . The transducer shall feature a supercardioid polar pattern . The output impedance shall be 150 ohms.

SITC of a Wireless Collaboration Hub with including software licenses/subscription, if required, for one year, supporting full-feature wireless presentation, video

conferencing, and digital signage. The system delivers dual 4K display output, allows up to 16 simultaneous screen shares, and includes cloud dashboard access.

14 The hardware consists of an Intel i5 Mini-PC with 8GB RAM, a 240GB SSD, and a custom Windows IoT operating system protected by a 2-year warranty. 1 Nos ₹ 4,26,615.00 ₹ 4,26,615.00

Included accessories feature a power adapter, power cable, and a VESA mounting bracket. including Wireless Keyboard & Mouse.

SITC of a 8 Ports POE+ with 2x1G & 2x1G SFP uplink L3 switch, with minimum 1.25Ghz 32-Bit, 2GB RAM, Packet buffer memory: 16 MB, Flash Memory: 256Mb,

Switching fabric: 24 Gbps Line-Rate (non blocking fabric), Throughput : Min. 17.86 Mpps, Latency <2.27µs 1G, IP Multicast Routing Entries : 512 IPv4 & 128

IPv6, Address database size: 16,000 MAC addresses, Number of VLANs: 4,093 (IEEE 802.1Q) simultaneously, Jumbo Frames Up to 12K, Multicast IGMP Group

membership : 2K IPv4 & 2K IPv6, DHCP Server: IPv4: 256 pools IPv6: 16 pools, Software-controlled fan adjustments, Pre-configured for audio and video over IP

out of the box with zero touch configuration for audio, profiles for Dante, Support for AV-over-IP protocols including Dante and/or AES67. AVB lincese should be

configurable, Auto-Trunk and Auto-LAG,static, RIP and PIM-SM, DM and SSM multicast routing, DHCP Server and Pv2 Transparent Clock, Industry standard

SNMP, RMON, MIB,LLDP, AAA, sFlow, RSPAN and PTPv2, Efficient authentication tiering with successive DOT1X, MAB and Captive Portal methods for

streamlined BYOD, Voice VLAN with SIP, H323 and SCCP protocols detection and LLDP-MED, Advanced IPv4/IPv6 security implementation including malicious

code detection, DHCP Snooping, IP Source Guard protection and DoS attacks mitigation, GARP with GVRP/GMRP, Multicast VLAN Registration Protocol

(MVRP), Broadcast, Unicast, Multicast DoS Protection, DHCP Snooping, IP Source Guard and DoS Protection,802.1x MAC Address Authentication Bypass

(MAB), IEEE 802.1x Radius Port Access Authentication, IEEE 1588 PTPv2, IEEE 802.1BA-2011 Audio Video Bridging (AVB), Temperature:32° to 113°F (0° to

45°C), certifications:CE: EN 55032:2015, Class A; EN61000-3-2:2014, Class A; EN 61000-3-3-:2013; EN 55024:2010; EN55035:2017, CB report/Certificate: IEC

62368-1 Ed.2; IEC 60950-1 Ed.2 Am2; CE: EN 62368-1:2014, BSMI: CNS 13438, Class A, RCM: AZ/NZS 62368.1:2018, FCC: 47 CFR FCC Part 15, Class A;

ANSI C63.4:2014 As per approved design by Engineer in charge.

SITC of Dual Band PoE Multi-Gig Insight Managed WiFi 6 Access Point ( 2x2 in 5.0GHz; 2x2 in 2.4GHz),IEEE 802.11AX,IEEE 802.11ac,IEE 802.11n,5GHz:

1200Mbps; 2.4GHz: 600Mbps, Wireless MultiMedia Prioritization,Wireless Distribution System, Power over Ethernet (PoE) IEEE 802.3af/802.3at, Wi-Fi Protected

Access (WPA3), Wired Equivalent Privacy (WEP) 64-bit, 128-bit, and 156-bit encryption, Wireless access control to identify authorized wireless network devices,

MAC address filtering with access control, Basic Service Set Coloring (BSS Coloring Security Socket Layer (SSL) remote management login, Network

16 Management:Remote configuration and management through Web browser, SNMP or Telnet , Target Wake Time (TWT), Block SSID Broadcast, Bidir and MU- 2 Nos ₹ 78,061.00 ₹ 1,56,122.00

MIMO, Certificates:Health & Safety: EN 62368-1:2014/AC:2015, EN IEC 63000:2018 (RoHS), EN 50385:2017 (MPE), EMC: EN 55032:2015+A11:2020, EN

893 v2.1.1 (2017-05), Cybersecurity: EN 18031-1:2024, EN 18031-2:2024, TEC under Mandatory Testing and Certification of Telecom Equipment certificate,

WPC Certified. As per approved design by Engineer in charge.

Digitally signed by MANISH

SITC of a professional-grade 8x8 HDMI 2.0 Matrix Switcher supporting native resolutions up to 4096x2160@60Hz with a continuous data rate of 18 Gbps, a 600

MHz pixel clock, HDR, 3D, and Deep Color up to 12-bit. It must provide embedded digital audio on all inputs, integrated hardware-level audio de-embedding

routed to \(\ge \)2 analog line-level outputs, and full HDMI pass-through for multi-channel formats including LPCM up to 7.1/192 kHz, Dolby Atmos, Dolby TrueHD,

DTS:X, and DTS-HD Master Audio. The system must incorporate automatic output re-clocking, comprehensive built-in EDID management, and user-selectable

17 HDCP 2.3 authorization control per input on a fixed or modular chassis featuring front panel LED signal status indicators. For advanced operations, the unit must 1 Nos ₹ 9,30,566.00 ₹ 9,30,566.00

be manageable via RS-232, CEC, and front panel buttons, alongside an integrated female RJ-45 Ethernet port supporting secure protocols such as DHCP, DNS,

HTTP, HTTPS, ICMP, IEEE 802.1X, NTP, SFTP, SMTP, SNMP, SSH/TLS/SSL, TCP/IP, Telnet, and UDP/IP. Additionally, the device must feature an eco power-

saving mode or a redundant power supply, operate reliably within a 0 to +50 °C temperature threshold, and hold global CE, UL, and RoHS safety certifications.As

per approved design by Engineer in charge.

SITC of a wireless and wired presentation system compatible with operating systems including Windows 10 and later, macOS 12.0 and later, iOS 15 and later,

and Android 13 and later. The device hardware must feature 1x HDMI, HDMI 2.0 standard video input and 1x HDMI, HDMI 2.0 standard video output, supporting

an output resolution of 4K @60 at 4:4:4 chroma sampling while maintaining HDCP 2.3 or better compliance. For audio, it must include 1x Analog

balance/unbalance on 3.5 mm stereo mini jack/ captive screw audio output. The system architecture must support Multiview for simultaneous viewing of 04 or

more devices on the single screen and support dual network to share content without installing software via Airplay®, Miracast®, or Web Share. For network

management, it must feature a 10/100/1000Base-T, half/full duplex Ethernet Port with industry standard protocol DHCP, DNS, HTTP, HTTPS, IEEE 802.1X, NTP,

SFTP, SMTP, SNMP, SSH, TCP/IP, and should support Power Over Ethernet in addition to external power Supply, with power included. Structurally, it should

have built in or provided with external wireless access point, shall support presentation content sharing using software/app/dongle, web browser, and support

Miracast. Additionally, the devices shall feature min one or more USB 3.0 port to connect with peripheral for software-based conferencing, include RS232 device

control port for display controls, operate within a temperature range of 0 to +40 °C, and meet CE, UL, FCC, RoHS compliance.As per approved design by

Engineer in charge.

SITC of 1 or more HDMI 2.0 inputs and 2 or more HDMI 2.0 outputs video configuration. The device must support a resolution of 4K@60, 4:4:4, with a data rate of

18 Gbps, and support HDR, Deep Color up to 12‑bit, and 3D. For audio routing, it must include 1x Embedded on HDMI inputs audio input and 2xEmbedded on

19 HDMI audio output. The system architecture must incorporate built in EDID management and remain HDCP 2.3 or better compliant. Structurally and operationally, 2 Nos ₹ 1,02,242.00 ₹ 2,04,484.00

the unit must feature front panel LED indication for power and signal status, perform reliably within an operating temperature range of 0 to +50°C or better, and

meet CE, UL, RoHS compliance.As per approved design by Engineer in charge.

SITC of a rack mountable, twisted pair transmitter featuring 1x HDMI video input and 1x Twisted pair on RJ 45 port video output. The device must support a

resolution of 4K @60, or better, with a data rate of 10.2 Gbps or better, and achieve a transmission distance of 70 Mtr or more over shielded twisted pair cable.

For system management, it must include control input featuring 1 or more RS232 and 1 or more IR to control remote device, while ensuring HDCP 2.3 or better

compliance. Operationally, the transmitter should support both local power supply and remote powering, feature front panel LED indication for power and signal

status, and maintain a power consumption of less than 5 watt. Additionally, the unit must operate within a temperature range of 0 to +50 °C or better, meet CE,

UL, RoHS compliance, and shall be provided with under table mounting accessories.As per approved design by Engineer in charge.

SITC of a rack mountable, twisted pair receiver with audio output featuring 1x Twisted pair on RJ 45 port video input and 1x Analog stereo balanced/unbalanced

audio output. The audio performance must deliver a frequency response of 20 Hz to 20 kHz, ±0.5 dB or better, with a S/N Ratio of >90 dB or better. The device

must feature 1x HDMI video output, supporting a resolution of 4K@60, or better, with a data rate of 10.2 Gbps or better, and achieve a transmission distance of

21 70 Mtr or more over shielded twisted pair cable. For system management, it must include control input featuring 1 or more RS232 and 1 or more IR to control 6 Nos ₹ 75,284.00 ₹ 4,51,704.00

remote device, while ensuring HDCP 2.3 or better compliance. Operationally, the receiver should support both local power supply and remote powering, feature

front panel LED indication for power and signal status, and maintain a power consumption of less than 6 watt. Additionally, the unit must operate within a

temperature range of 0 to +50 °C or better, and meet CE, UL, RoHS compliance.As per approved design by Engineer in charge.

SITC of an occupancy sensor utilizing ultrasonic and passive infrared sensors with an adjustable timer. The system architecture must deliver a coverage area of

at least 2000 square feet and incorporate dedicated LED indicators for occupancy detection. For optimal configuration, it must feature adjustable sensitivity and

provide a digital output/ normally open/close relays signal type operating within an output voltage range of 0 - 24 VDC. The sensor must include a built-in photocell

22 supporting an adjustable natural-light override that ranges from 10 to 1000 Lux. Additionally, it must incorporate advance features including a automatic or user- 2 Nos ₹ 76,083.00 ₹ 1,52,166.00

configurable timer adjustment., self-adjusting passive infrared thresholds, and automatic false-on and false-off correction. Structurally and operationally, the

device must perform reliably within an operating temperature range of 0 to +40 °C and strictly satisfy CE, UL, RoHS regulatory compliance.

Digitally signed by MANISH

SITC of a high-performance, Quad core, AV control processor with specified control ports, advanced security standards and dual Gigabit Ethernet network port for

guest network separation during control monitoring, compatibility with touch panel, button panel of OEM using a standard network infrastructure. The hardware

connectivity must feature one or more bidirectional RS-232 ports, one or more bidirectional RS-232/RS-422/RS-485 ports, one or more IR/Serial ports, two or

more low voltage relay ports, four or more Digital I/O port, and one or Serial expansion interface for OEM-supported accessories. to connect accessories for

23 control system expansion. The system must support compatibility with touch panel, button panel of same OEM, and be equipped with a memory capacity of 8 GB 1 Nos ₹ 2,72,979.00 ₹ 2,72,979.00

or more Flash and 2 GB or more SDRAM. For network operations, it must incorporate 1 or more 10/100/1000Base-T Ethernet port for monitoring and control

minimum up to 30 or more devices, strictly supporting ethernet protocols including DHCP, DNS, HTTP, HTTPS, IEEE 802.1X, NTP, SFTP, SMTP, SNMP, SSH,

TCP/IP, and UDP/IP. Additionally, the processor must feature a built In or external IR Learner to capture IR commands, function reliably within an operating

temperature range of 0 to +50 °C, and maintain CE, UL, RoHS compliance.As per approved design by Engineer in charge.

SITC of a 10” or bigger color capacitive touch screen with minimum 1280 x 800 resolution Integrated Ethernet port compatible with control processors, and shall

be supplied with suitable table mount accessories, supporting PoE power and supplied with suitable PoE injector or PoE network switch. The screen type must

feature an active matrix TFT color display with fast quad-core processor for smooth processing, delivering a brightness of 350 Nits or better, a contrast of 800:1 or

better, and a color depth of 24 bit, 16.7 million colors or higher. The display must provide a viewing angle of ±80° horizontal, ±80° vertical or better, and be backed

by a memory capacity of min 2GB SDRAM or better, and min 8 GB flash memory or better. For advanced environment interaction, it must incorporate a built in

light and motion sensor, alongside an audio output featuring a built in speaker for touch feedback. For network infrastructure connectivity, the device must support

ethernet protocols including DHCP, DNS, HTTP, HTTPS, ICMP, IEEE 802.1x, SFTP, SSH, TCP/IP, UDP/IP, and the touch panel should support PoE and supply

with POE injector or compatible POE network switch. Additionally, the unit must operate reliably within a temperature threshold of 0 to +40 °C or better, and

maintain BIS, CE, UL, RoHS compliance.As per approved design by Engineer in charge.

SITC of a all required AV, control, audio, video, network, and power cables along with associated connectors, adapters, termination accessories, cable

management hardware, labeling, ferrules, lugs, heat-shrink sleeves, cable ties, mounting accessories, and consumables as required for complete integration and

25 satisfactory operation of the system. The lot shall include all interconnections between equipment, field devices, racks, displays, microphones, speakers, control 1 LOT ₹ 2,72,308.00 ₹ 2,72,308.00

interfaces, and network infrastructure, irrespective of quantity, to deliver a fully functional turnkey solution.

Grand Total of Conference Room-3F ₹ 1,21,76,179.00

Grand Total of Conference Room-3F ₹ 1,21,76,179.00

Digitally signed by MANISH

AV CONFERENCE ROOM - 2F

Sno. Qty UoM Unit Rate Total Rate

Conference Room-2F

SITC of professional-grade 75" display panel type IPS/VA with a native resolution of 3840x2160, a display

response time of 8 ms or better, a viewing angle of 178°, a color depth of 10/12 bits with 1.07 billion

colours or higher, and a color gamut of 90% DCI-P3 or equivalent. The screen hardware must feature an

anti-glare (AG) panel surface,contrast ratio of 1200:1 or better, a dynamic contrast ratio of 300000:1 or

1 better, a typical brightness of 440 nits or higher,response time of < 8 ms or better, orientation: landscape / 1 Nos ₹ 2,23,292.00 ₹ 2,23,292.00

portrait, 24x7 Operation, Aspect Ratio 16:9, display should support HDR10, HLG and Dolby Vision, Wi-Fi

enable, 1x RJ45 port, HDCP2.3 complied, 3 x HDMI ports or higher, USB2.0 x 2, control : RS232 x 1 and

HDMI-CEC enable (HDMI Auto Wake up) features, Inbuilt Speakers 20W or higher, Certification: CE, FCC,

BIS, As per approved design by Consultant and Engineer in charge.

SITC of a enterprise all-in-one video bar system features a 150-degree Panoramic-4K dual-camera or

higher array, an 8-microphone beamforming setup, and an integrated native computing architecture. User

interactions are managed via a 10.1-inch tabletop room controller touch pad equipped with a built-in PIR

2 motion sensor for automated system wake-up, instant one-touch meeting launching, and synchronized 1 Nos 4,81,077.00 4,81,077.00

content sharing. The hardware layout is supplemented by an optional wireless Bluetooth remote control to

enable hand-held Pan-Tilt-Zoom (PTZ) modifications and quick localized audio-video adjustments.As per

approved design by Consultant and Engineer in charge.

SITC of a professional-grade wireless conferencing system providing full BYOD support, compatible with

operating systems including Windows 10 and higher, macOS 11 and higher, Android v11 and higher, and

iOS 14 and higher. The device must support a video output resolution of 4K UHD (3840*2160) @ 30Hz via

HDMI 1.4b or USB-C DisplayPort 1.2, delivering audio output over USB or HDMI, and allowing a minimum

of 1 source simultaneously on screen. It must feature native protocol support for Airplay, Google Cast, and

3 Miracast, allowing a maximum number of 16/32 simultaneous connections with Buttons and/or App. For 1 Nos 3,81,231.00 3,81,231.00

network and wireless connectivity, the hardware must integrate 1x Ethernet LAN 1Gbit port, operate on 2.4

GHz and 5 GHz frequency bands over IEEE 802.11 a/g/n/ac and IEEE 802.15.1 protocols, and achieve a

maximum reach of 30m (100 ft) between the wireless transmission button and the base hardware unit.

Digitally signed by MANISH

SITC of a all required AV, control, audio, video, network, and power cables along with associated

connectors, adapters, termination accessories, cable management hardware, labeling, ferrules, lugs, heat-

shrink sleeves, cable ties, mounting accessories, and consumables as required for complete integration

and satisfactory operation of the system. The lot shall include all interconnections between equipment,

field devices, racks, displays, microphones, speakers, control interfaces, and network infrastructure,

irrespective of quantity, to deliver a fully functional turnkey solution.

Grand Total of Conference Room-2F ₹ 11,30,600.00

Grand Total of Conference Room-2F ₹ 11,30,600.00

Digitally signed by MANISH