Special court Bichar Bhawan

Supply and Laying of PVC conduits(ISI marked) or PVC Casing laying through surface with all accessories as required for the entire system with all OEM accessories. (Quality: MMS; Ø=25mm) Ref. Make: Precision, Presto Plast, Supreme, Oriplast; Quality : ISI Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

SITC of 24Port, Stackable, Layer 2, PoE enabled, with PD: minimum 370 Watt (should have minimum 15.4 Watt per Port), Full managed only, 1RU, GE Switch to be operated on 200-240VAC, 50 Hz Supply, with perpetual license of OEM, having minimum technical specification: a) 24 x 10/100/1000Base-T Mbps PoE+ enabled host ports (Minimum); b) 4 x 10GBase-F SFP uplink ports; c) Forwarding performance/stacking bandwidth/ backplane speed (Minimum) of 41.5 Mpps; d) Fanless operation with operating temperature up to 50°C; e) DRAM and Flash RAM as per OEM; f) Software support with IPv4 routing (542 routes), multicast routing (IGMP) including necessary software license; g) Minimum switching capacity of 56Gbps; h) Number of VLAN Supported: 64 (Minimum).; i) Total number of MAC Address: 32,000 (Minimum); j) Minimum Security: User privilege management and password protection, DoS attack defense, ARP attack defense, and ICMP attack defense, Binding of the IP address, MAC address, interface, and VLAN, Port isolation, port security, and sticky MAC, MFF, Blackhole MAC address entries, Limit on the number of learned MAC addresses, 802.1x authentication and limit on the number of users on an interface, AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC, SSH v2.0, Hypertext Transfer Protocol Secure (HTTPS), CPU defense, Blacklist and whitelist; Access Security: DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security; k) Others: Applicable standards: IEEE 802.1p: CoS prioritization , IEEE 802.1Q: VLAN tagging, IEEE 802.1X: Port Access Control, IEEE 802.3: 10BASE-T, IEEE 802.3u: 100BASE-T,IEEE 802.3ab: 1000BASE-T, IEEE 802.3z: 1000BASE-X,IEEE 802.3af: Power over Ethernet, IEEE 802.3at: Power over Ethernet Plus, IEEE 802.3x: Pause Frames/Flow Control, IEEE 802.1D: Spanning Tree Protocol, IEEE 802.1s: Multiple instances of Spanning Tree Protocol (MSTP), IEEE 802.1w: Rapid reconfiguration of Spanning Tree Protocol, IEEE 802.3ad: Link Aggregation Control Protocol; l) REGULATORY: RoHS, WEEE, IEC 61000-4-2:2008, CISPR Class, ICES-003 Class A,UL,CSA 22.2,FCC,EN 300 386, CCC, ICES -003, CB. The OEM should have 24x7 TAC support center with India toll free number reflected in official website. Ref. Make: Cisco, Juniper, Extreme, Aruba, Equivalent Warranty: 03 (Three) Years onsite comprehensive OEM warranty with parts and service except force majeure.

SITC of Integrated VPN Router alongwith PD: minimum 110 Watt PoE+ and Controller Capability having minimum technical specification: Access Control: Source/Destination IP Based Access Control; Filtering: URL Filtering; Standards and Protocols: IEEE 802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE 802.3x, IEEE 802.1q; TCP/IP, DHCP, ICMP, NAT, PPPoE, NTP, HTTP, HTTPS, DNS, IPSec, PPTP, L2TP, SNMP Interface: 2 x Gigabit SFP WAN/LAN ports; 1 x Gigabit WAN port; 1 x Gigabit LAN/WAN port; 8 x Gigabit LAN ports; PoE Budget: 8 x ports PoE+ output, 110 W PoE Budget; Flash: 8Mb Nor + 4 GB EMMC; DRAM: 1 GB DDR3; PERFORMANCE: Concurrent Session: 24,980; New Sessions /Second: 1,900; NAT (Static IP): 935.5 Mbps / 942.1 Mbps; NAT(DHCP): 940.2 Mbps / 941.7 Mbps; NAT(PPPoE): 913.1 Mbps / 935.2 Mbps; NAT (L2TP): 545.0 Mbps / 912.7 Mbps; NAT (PPTP): 523.0 Mbps / 912.8 Mbps; IPsec VPN Throughput (AES256): 168.5 Mbps; IPsec VPN Throughput: AES256: 168.5 Mbps; OpenVPN: 34 Mbps; L2TP VPN Throughput: Unencrypted: 845.3 Mbps, Encrypted: 333.2 Mbps; PPTP VPN Throughput: Unencrypted: 1012.6 Mbps; Encrypted: 401.4 Mbps; 66 Byte Packet forwarding rate: 154,069 pps / 156,977 pps; 1,518 Byte Packet forwarding rate: 81,193 pps / 81,193 pps; Ref. Make: TP-Link, Model: ER7212PC or Equivalent of Cisco, Juniper, Extreme, Aruba, Zyxel, D-Link, Equivalent Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

SITC of Centralized Controller Depended Dual Band Wireless Access Point with of OEM, having minimum technical specification: AP type: Indoor, dual radio, 5GHz 802.11ax 2x2 MIMO and 2.4GHz 802.11ax 2x2 MIMO, Dual-band radios; 20, 40, and 80 MHz Channels; 5GHz radio: 1.2 Gbps data rates and 2.4GHz radio: 575Mbps on dual concurrent radio operations; Packet Aggregation (AMSDU, AMPDU); Reduced Interface Spacing; Layer 2 and Layer 3 Layer 3 routing, 802.1q, DynDNS, DHCP server/client, BOOTP client, PPPoE and LLDP; Security: Stateful Firewall, IP filtering, NAT, 802.1ax, 802.11i, WPA2, WPA Triple Methodology Rogue Detection: 24x7 dual-band WIPS sensing, on-board; IDS, and secure guest access (hotspot); Quality of Service (QoS) WMM, WMM-UAPSD, 802.1p, Diffserv, and TOS; Operating Channels: 2.4 GHz band: channel 1 through channel 13, 5.2 GHz band: channel 36 through channel 165. Ref. Make: Tp-Link, Ref. Model: EAP660 HD AX3600 or Equivalent of Zyxel, Radwin, Juniper, Extreme, Cambium, Aruba, Zyxel, Equivalent Licence: 03(Three) Years subscription with 24x7 Comprehensive on-site support and 03(Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

Supply and Laying of Networking Horizontal Single Sheathed unArmoured Cable, 1000Base-T (Gigabit Ethernet), 100Base-T (Fast Ethernet), 10Base-T (Ethernet), 1-250 MHz (Minimum), Category 6, 4-Pair, U/UTP, 23 AWG solid bare copper conductors with FEP insulation, polyester separator, LSZH OUTER sheath COVER as to standard of ISO/IEC 11801Ed. 2.0, EN 50173-1 and TIA/EIA 568C. Ref. Make: Molex, Commscope, Belden, R&M, Legrand, Derwiser, Genius, Equivalent Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

SITC of CAT6, U/UTP, Indoor Information Outlet with RJ45 adapter, Single face cover plate and backbox etc having minimum technical specification Ref. Make: Molex, Commscope, Belden, R&M, Legrand, Derwiser, Genius, Equivalent Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

SITC of PATCH CHORD Category 6 4-Pair, U/UTP, Horizontal cable, 23 AWG solid bare copper conductors WITH RJ45 CONNECTOR AT BOTH END 1 MTR LENGTH 1000Base-T (Gigabit Ethernet), 100Base-T (Fast Ethernet), 10Base-T (Ethernet), 1-250 MHz (Minimum), Category 6, 4-Pair, U/UTP, 23 AWG solid bare copper conductors with FEP insulation, polyester separator, LSZH OUTER sheath COVER as to standard of ISO/IEC 11801Ed. 2.0, EN 50173-1 and TIA/EIA 568C. Ref. Make: Molex, Commscope, Belden, R&M, Legrand, Derwiser, Genius, Equivalent Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

SITC of PATCH CHORD Category 6 4-Pair, U/UTP, Horizontal cable, 23 AWG solid bare copper conductors WITH RJ45 CONNECTOR AT BOTH END 2 MTR LENGTH 1000Base-T (Gigabit Ethernet), 100Base-T (Fast Ethernet), 10Base-T (Ethernet), 1-250 MHz (Minimum), Category 6, 4-Pair, U/UTP, 23 AWG solid bare copper conductors with FEP insulation, polyester separator, LSZH OUTER sheath COVER as to standard of ISO/IEC 11801Ed. 2.0, EN 50173-1 and TIA/EIA 568C. Ref. Make: Molex, Commscope, Belden, R&M, Legrand, Derwiser, Genius, Equivalent Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

SITC of 24 Port Modular CAT6 STP Shielded Fully Loaded Jack Panel with integrated rear cable manager, having minimum technical specification: Jack: Type: CAT6 Modular Shielded RJ45 Jacks shall meet and exceed channel specification of ANSI/TIA-568.2-D and ISO/IEC 11801 Class EA; Application: Shall support 4-Pair PoE (90W) as per IEEE 802.3bt; Flammability: UL 94V-0 rated; Modular Jack Housing: Zinc Alloy; Contact material: Beryllium copper base with 1.27um Gold plated; Termination procedure: Shielded jack should support uniform hassle free termination technology and be able to ensure termination of all 4 pairs in single punch-down. Jacks should have inherent cable strain relief mechanism to secure each termination. The termination contacts should be protected from dust and cable tensions once terminated. The modular jacks should contain integrated cutting blades used during termination to allow all four pairs of a four pair cable to be terminated at one time; Wiring Pattern: T568 A and B; Shall accept solid or stranded conductors with a maximum insulation diameter of 1.60 mm and cable OD of upto 8.50mm; Cable types: Shall be able to terminate all types of shielded cables including U/UTP, F/UTP, F/FTP and S/FTP; Electrical parameters: Shall comply with IEC 60512-99-002 specifications for un-mating under electrical load; Current rating 1.5A; Di-electric withstand voltage 1500 Vac; Insulation resistance, min 500 mOhm; Performance certification: Shall be Intertek / ETL certified under 4 connector 100m channel for CAT6A transmission compliance as per ANSI/TIA 568.2-D, ISO/IEC 11801 and EN 50173 standards; Operating Temperature: -10° to 60°C; Mating Durability: Shall support IEEE 802.3bt Type 4 (90 W) application upto 3000 plug to jack mating cycles; Compliance: RoHS compliant; Relative humidity: Upto 95% non condensing; Identification: Shall be available in min 8 different colors for ease of identification of circuits; Panel: Type: 19” 24-port, Unloaded shielded Jack panel, Straight, integrated with rear cable manager; Port arrangement: Modules of 6-ports each, arranged 1port x 6; Category: Should accept modular CAT6 shielded outlets, available in multiple color options; Port Identification: 9mm or 12mm Labels on each of 24-ports (to be included in supply); Grounding: Shielded panel must have integrated grounding strip and lugs; Flammability: UL 94V-0 rated; Material: High-impact, flame retardant, thermoplastic; Panel: Black, powder coated steel; Safety rating: UL listed; Manufacturing: Shall be design and manufactured in ISO 9001:2015 facility; Relative humidity: Up to 95%, non-condensing; Packaging: Re-cycled material, Environment friendly, single-use plastics-free packaging; Ref. Make: Molex, Commscope, Belden, R&M, Legrand, Derwiser, Genius, Equivalent Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

SITC of 9U Double Section Wall Mount Rack, having minimum technical specification: 9U x 550(W) x 600(D) Wall Mont Network Rack - CKD/NRS1/ Wall Mount Rack Frame with Front Glass Door with Single point swing handle Lock Door, Back Perforated Dual Door with three Point Swing Handle Lock, Vented Side Panels, Top-Bottom, Castors Wheels, Leveler Sets, 19" Adaptor Kit; Basic Frame: Steel; Construction: Welded; Top & Bottom Cover: Welded to Frame with Cable entry exit cut outs; Front Door: Lockable Toughened Glass Door; 19” Mounting Angle: Formed Steel; Std. Equipment Mounting: DIN Std. 10mm Sq. Slots; Standard Finish: Powder coated; Standard Colour: Grey & Off White OR Black; Rack Standard: Conforms to DIN 41494 or equivalent standard; Static Load: 30Kg; Accessories: Cable Organisers, Power Distribution Units, Shelves, Cooling Fans, Rack ground Kit. 01no x 90 CFM 2 Unit Aircirculation Fan Tower Mount; 01no x Power Distribution Unit 6 Socket 5/15Amp With 01no 16Amp MCB, 230 Volt along Input Cable; 02set x Mounting Hardware Screw (Pack of 20); Ref. Make: Tata, Vertiv, Legrand, Netrack, Valrack, Rittal, APW, MRS Warranty: 03 (Three) years onsite comprehensive OEM warranty including parts, and service except force majeure.