SPL REPAIR TO PATHWAY CONNECTING TO PERS LINE TO ADM BLOCK AND DHOBI GHAT TO CHURULI ROAD, PROVN OF DRAINAGE SYSTEM CONNECTIVITY TO MAIN DRAIN TO COMPANY STORE/LINE/OFFICE AREA AND OTHER SANCTIONED WORKS IN THE AREA OF AGE B/R-I UNDER GE PANAGARH

Amount

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles including removing rubbish off from the site complete all as specified and directed.

Demolition of cement concrete (un- reinforced) not exceeding 15 cm thickness (above or below ground level) and removing rubbish off from the site complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for brick work using old size bricks (except Bricks) straight or curved on plan exceeding 6.00 Meter mean radius, built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work with flyash bricks straight or curve on plan to any radius in half bricks thick walls, built in cement mortar (1:4) complete all as specified and directed.

Moorum/red bajri filling in floors or in foundation, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for broekn stone hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L for 100mm thick plain cement concrete type C- 2, 1:3:6 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block with grey cement and no pigmenetany shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed.

Surface dressing n exc 15 cm deep in soft /loose soil complete all as specified and directed.

M&L for plain cement concrete type B0(1:2:4) (using 12.5mm graded stone aggregate) as in coping including necessary formwork complete all as specified.

Supply and Laying 150mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for concrete bed to 150 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 (using 40mm graded stone aggregate all as specified and directed.

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n.exc 1.5 m in depth and getting out in soft/loose soil.

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n.exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.

M&L for broken stone hardcore of gauge n.exc. 63mm, deposited, spread and leveliled in layers n exc. 150mm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC type C2, 1:3:6 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for setting coat of 3mm thick of CM (1:2), trowelled to even and smooth finish over rendering 10mm thick in CM (1:4) on fair faces of brick work finished surface even & smooth complete all as specified and directed.

S&F 110 PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Returning, filling in and including spreading, leveling, watering & well ramming in layers n.exceeding 25 cm in soft/loose soil complete all as specified and directed.

Removing of excavated materials to a distance n. exc 50m and depositing where directed at a level n exc 1.5m above the starting point in oft/loose soil complete all as specified and directed

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in bed concrete for foundation filling & mass concrete complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed.

M&L for formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for rough finished surface, n.exc 200m thick (Horizontal or sloping) complete all as specified and directed.

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as specified and directed

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in columns, pillars, piers, etc complete all as specified and directed

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 33.00 mentioned here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete wall surfaceS&Finishing the surfaces fair and even complete all as specified and directed.

M&L for rendering 20 mm thick cement plaster in CM (1:6) on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) incl WPC complete all as specified and directed. (Note: WPC will be measured and paid separately).

M&L for rendering 5 mm thick in CM (1:3) on fair faces of brick work or concrete wall surfaceS&Finishing the surfaces fair and even on ceiling complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for finishing walls with Acrylic Smooth exterior paint of required shade for new work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).

M&L for preparation new plastered surfaces and applying three coat of white washing on ceiling complete all as specified and directed

M&L for 100 mm thick PCC type C-2, 1:3:6 (using 40 mm graded stone aggregate) finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) 25 mm thick as in floor for receiving screed bed complete all as specified and directed

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry over and including 15 mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.

S&F bib tap long body with CP nipple cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore complete all as specified and directed

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with aluminium alloy brackets and guard rail complete all as specified and directed

S&F in tubular towel rail /towel ring 20mm dia D type and 60cm long between flanges of brass chromium plated complete all as specified and directed.

S&F in stop valve cast copper chromium plated concealed with long shank type screwed down, high pressure with capstan head suitable for 15 mm bore complete all as specified and directed

S&F in Grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed

S&F 15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified and directed.

M&L for glazed ceramic tiles 300 x 200 mm x 7 mm thick in vertical surfaces such as risers, skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick cement plaster in CM (1:4) on brick or concrete surfaces complete all as specified and directed

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing.

S&F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with requir etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F Powder Coating Anodised aluminium door shutters(minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.

S&F Sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 as in bed blocks for hold fast including necesssary formwork complete all as specified and directed

S&F mild steel flat iron as in hold fast, clamps articles conforming to FE 290 Gde-E-165 complete all as specified and directed.

S&F 100 mm size butt hinges extruded aluminium alloy with galavanised mild steel hing pin anodised and fixed type C-21 complete all as specified and directed

S&F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminium handles, cast type, anodised 150mm long complete all as specified and directed.

S&F 200 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed complete all as specified and directed.

S&F vitreous china Wash down water closet (Padestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging etc (excluding cost of flush tank) complete all as specified and directed.

S&F 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with PVC flushing pipe of size complete all as specified and directed.

S&f vitreous china wash basin, white , flat back , size 550 x400mm (for hospital use) excluding taps, waste, chain and plug and porcelain stopper but including brackets any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F 15 mm bore stop valve cast copper alloy screwed down, high pressure, with crutch or but-ter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15 mm pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

Supply flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F soap dish, vitreous china white, approximate size 160 x 160 x 90mm complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm dia of outlet plain with grating including jointing with solvent cement complete all as specified and directed

S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed.

S & F Viterous China urinals, bowl type (back or corner wall type), of size 465 x 355 x 265mm white complete including providing and fixing plugs, bedding urinal agianst wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F Urinal Spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and directed

M&L for laying Reinforced concrete pipes 200 mm in dia, class NP2, laid and jointed complete with collars complete all as specified and directed

M&L for Concrete bed to 200 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for damp proof course 40mm thk in cement concrete 1:2:4 type B-0 to horizontal or vertical surfaces including necessary form work complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete wall surfaceS&Finishing the surfaces fair and even complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) using WPC on fair faces of brick work or concrete wall surfaceS&Finishing the surfaces fair and even complete all as specified and directed. (Note: WPC will be meaured and paid seperately)

M&L for preparation of new plastered or un-plastered surfaces of walls applying two or more coats of 100% premium acrylic emulsion (Exterior weather coat) paint having VOC less than 50 gm/litre and UV resistance exterior paint of required shade (Company depot tinted) with silicon additives@ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).

Supply and fix Steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surface not exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

S&F 3mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane complete all as specified and directed.

M&L for 100 mm thick plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base in floor/paving/hardstanding complete all as specified and directed.

M&L for 40 mm thick cement concrete type B-1, (1:2:4) (using 20mm graded stone aggregate) as in flooring complete all as specified and directed.

M&L for 75 mm thick plain cement concrete (1:3:6) type C2 (using 40 mm graded stone aggregate) as in plinth protection, paving including finishing surface even and smooth without using extra cement complete all as specified and directed.

Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in soft/loose soil complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete wall surfaces & finishing the surfaces fair and even complete all as specified and directed.

M&L for 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete required will be supplied by Contractor rate for the same is included in the item rate quoted complete all as specified and directed.

All as per item No 89.00 mentioned here-in-above but 40mm bore complete all as specified and directed

M&L for 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as specified and directed.

S&F capacity 500 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top with three layered) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engineer in Charge

S&F Ball brass valves, high pressure, with polyethylene float and flynut complete, screwed for iron pipe or brass ferrule for 25mm bore complete including taking down all as specified and as directed.

EM PORTION M&L point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

S&F switch piano flush type, single pole, 6 Amps, one way complete all as specified and directed.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed

S&F metallic Exhaust ventilation fan of sweep 300 mm sweep, 230volt AC complete with louver and all asssesories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing connected with rwin core twisted flexible copper conductor (23/0.0076) of size complete all as specified and directed by Engr-in-Charge.

S&F 01x 18 W LED batten light fittings, with T-8 tube, lighting fixture with extruded polycarbonate complete with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as specified and directed.

S&F 5W LED light fitting wall mounted batten 2ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 9 watt , 6000K including necessary connection complete all as specified and directed.

S&F security light fittings 25 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed.

S&F epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F MCB SPN 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 2 core complete all as specified.

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and directed. (Note : Punned thickness shall be measured).

M&L for sub class B bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete all a specified and directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. (Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost)

MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP

M/S Dey Construction

ANIMA ENTERPRISE

SUPARNA TRADING

M/S S M ENTERPRISE

KAZI SAHABUL ALAM

M/S TRIVENI BUILDERS

M/S N B SEN CONSTURCTION