CERTAIN SPECIAL REPAIRS WORK AT BAGRAKOTE STN UNDER GE SEVOKE ROAD

Amount

Taking down chowkats with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified

S&F pressed steel frames (Size-165X60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified .

M&L for PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in block for hold fast, filling in frames, copings or similar work and finished the surface with existing including form work complete all as specified and as directed.

S&F factory made 2nd class hard wood rail and style 35mm thick plain framed, panelled shutter (two panel ) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F factory made 2nd class hardwood rail and style 35 mm thick Glazed and skeleton shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauge etc size of members of shutters as specified in SSR part-I Section 8 and clause 8.24(a) complete all as specified

S&F mild steel tower bolts stove enamelled black with bright bolt 200 mm long complete all as specified and as directed.

S&F 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts nuts, four on bolts plate & two on staple plate complete all as specified and as directed.

S&F mild steel pressed handle oval type stove enamelled black 150 mm long complete all as specified and as directed.

S&F 300mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Taking down chowkats with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm each including guard bars complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete with glazing bars, dovetailed or welded complete all as specified and directed.

All as per item No 11 above , but without glazing bars complete all as specified..

S&F 3mm thick glass sheet ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane all as specified & directed.

S&F galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and as directed..

M&L for preparation of new untreated wood and wood base material of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above GL) complete all as specified

M&L 25mm thick cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregated) as in sub base to flooring etc complete all as specified.

M&L for screed bed or bedding layer of cement mortar 1:6, 20mm thick for laying floor finishes complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. Note : Screed base shall be measured and paid seperately.

M&L rendering 10mm thick in CM 1: 6 on fair faces of brick/concrete surfaces for fixing of wall tiles complete all as specified and as directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. Note : Screed base shall be measured and paid seperately.

M&L for glazed ceramic coloured tiles on vertical surface 450X350X7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.

Demolition of brickwork built in cement mortar including disposal of debris, etc outside MD land, complete all as specified and directed.

M&L for Brickwork with subclass B brick straight and curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for Brick work with sub class 'B' bricks as in half brick thick wall built in CM (1:4), complete all as specified and directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified

M&L rendering 15mm thick in CM 1: 6 on fair faces of brick/concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.

M&L for rendering 20mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including mixing WPC as per manufacturers instruction, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured seperately.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for preparation of new or untreated surfaces of walls and applying two coats of weather proof acrylic emulsion paint over a coat of alkali resistant primer complete all as specified and as directed

Preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed

M&L for Preparation of old platered surfaces of walls and applying one coat of white wash complete all as specified and as directed

M&L for complete removal of old existing treatment on wall surfaces and applying two coats of weather proof acrylic emulsion paint over a coat of primer complete all as specified and as directed

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for (Reinforced) complete all as specified and as directed.

M&L for RCC 1:1:5:3 type BI (using 20mm graded stone crushed aggregated ) nominal mix in slabs supported on walls complete all as specified and as directed. Note:- Re-inforcement shall be measured and paid separately)

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed), not less than 0.9mm dia or securing with clips complete all as specified.

All as per item No.37 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as directed.

M&L 20mm thick granite slabs of any type (table rubbed and polished) on cooking platforms set and jointed in net cement slurry and pointing in white cement (1:4) using marble dust with admixture of pigment to match shade of granite including necessary moulding at edges laid over and including 20mm thick cement mortor screed bed in cement mortor (1:4) complete all as specified and directed.

S&F in sinks without drain board, gloss finish, made of stainless steel 1 mm thick for kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe also including 40mm bore PVC waste pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in 15mm bore Bib taps, cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and as directed.

Supply only 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement & other end fixed complete all as specified and as directed.

S&F low density 32mm bore polythene waste pipe (LDPE) complete all as specified and as directed.

Taking down 15 mm bore GI pipe line including fittings and removal to store or cleaning for re-fixing complete all as specified and as directed.

S&F 15 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all specified and directed.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc; complete, size of frame 105mm x 60mm including one shop coat of Zinc Chrome primer complete all as specified and as directed

M&L for 75 mm thick PCC 1:3:6 (type C-2) (using 40mm graded crushed stone aggregate) as in plinth protection/approach/hard standing path of bldg finished cement concrete surfaces fair and even complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section in any position as in framed works complete all as specified and as directed.

Dismantling plain or corrugated AC sheeting any gauge or thickness as in roof covering complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

S&F Mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlines to steel trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.

S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc( Fe 410-W Gde-E-250) quality A Including preparation of surface and one shop coat of zinc chromate primer at contractors workshop before fabrication complete all as specified and directed by Engineer-in-Charge.

S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe 410 W Gde-E 250 Quality A complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.

S&F mild steel screw bolt, 5 to 10mm dia machine made with hexagonal head at one end screwed the other or screwed both end, each screwed end to be fitted with washer and one hexagonal or square nut exceeding 05cm and not exceeding 10cm long complete all as specified.

S&F mild steel work (miscellaneous) as in wind ties for roof, flat iron fillets (for securing wire mesh etc) including drilling holes for securing bolts and fixed with bolts and nuts etc and similar work conforming to Fe-290.Gde-E-165, complete all as specified and as directed.

Dismantling wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified

S&F 605X605mm anodised aluminium snap grid frame work for false ceiling including 2.5mm dia mild steel wire galvanized class 3, @ 60cm centre to entre and fixed to steel or wooden member including 4mm thick Decorative non asbestos fibre cement boards fixed or laid/ inserted to aluminium frame work as in ceiling complete all as specified and directed. Note:- The size of aluminium main and croos tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm)

M&L for Preparing of new non AC board surfaces and applying three coats of white wash on ceiling complete all as specified.

M&L for preparation new steel surfaces of any description over 10cm width of grith and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation new steel surfaces of any description not otherwise described , over 10cm width of grith and applying two coat of synthetic enamel paint including a coat of red oxide primer complete all as specified and directed.

M&L RCC 1:2:4 , type B1, using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span and lintel band, roof band and other similar items including form work all as specified.

M&L for preparation new plaster surfaces and applying two coats of distemper oil emulsion over a coat of chalk whiting on wall complete all as specified and as directed

Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge or thickness as in roof covering complete all as specified and as directed.

Complete removal of existing treatment on wall surfaces and applying two coats of distemper oil emulsion over a coat of chalk whiting on wall complete all as specified and as directed .

M&L for 3mm thick wall care putty on wall complete all as specified and as directed.

M&L for virified ceramic coloured tiles (light shade) 10mm thick (square/rectangular) polished area of each tile not exceeding 0.36sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.

M&L for virified ceramic coloured tiles (light shade) 10mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.

Taking down carefully copper/Aluminum point wiring light fan, socket or power complete (fittings such as switches ceiling roses pendants, regulators, sockets, sketch light fittings, tube light fittings etc. to be measured separately if found serviceable) and removing unserviceable materials from site of work and segregating serviceable materials for safe custody and making good to disturbed surfaces of walls, floors, etc. including disconnecting of ceiling fan/exhaust fan complete all as directed

Taking down old unserviceable Main switch DB's consisting of MCB's wooden/GI/MS sheet board, energy meter etc for kept in store and for later use complete all as specified and as directed.

M&L for concealed point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.

All as per Item Sl No -74 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete.

All as per Item Sl No - 74 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.50 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete.

All as per Item Sl No -74 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A socket point with switch on same board complete.

S&F Switch Socket combination, 2-in-1, 3 pin, 5/6 Amps flush type complete all as specified and as directed.

S&F Switch Socket combination, 5-in-1, 5/16 Amps flush type complete all as specified and as directed.

S&F Switch piano flush type, single pole, one way, 5/6Amp complete all as specified and as directed.

S&F ceiling rose ,surface bakelite 65mm x 50mm size with three terminals all specified and as directed.

Taking down existing u/s FTL light fitting and S&F in repair decorative box type LED fitting 9 watt 2 feet with aluminium extruded batten luminaire for 230 volt AC complete all as directed.

Taking down existing u/s FTL light fitting and S&F in repair decorative box type LED fitting 20 watt 4 feet with aluminium extruded batten luminaire for 230 volt AC complete all as directed.

S&F new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium building security light with high power LED as light source lamp type 25 w with SPD , IP-66 protection with toughened glass including fixing pipe/saddle complete all as specified and as directed.

Supply and fixing DB with sheet metal enclouser 240 volts, 12 way with rated bus bar single pole & neutral double door for MCB, including cutting chases for DB of required size and making good disturbed surface area and putting blanking plate if required including taking down old unserviceable one complete all as specified and as directed.

S&F MCB, SP, 10 KA, 230 V. "C" curve, 06-32 A , ISI marked complete all as specified and directed

S&F MCB, DP, 10 KA, 230 V. "C" curve, 06-32 A , ISI marked complete all as specified and directed

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.5 m below ground level, connected to GI earth wire 4mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I, connected to earth test point all as specified or indicated including excavation and connected earth work in soft / loose soil, P.C.C 1:3:6 type C-1 as in pit, 20mm dia GI pipe light grade for watering pipe, 15mm bore GI light grade earth lead protection pipe, 50mm thick R.C.C. 1:2;4 type B-1 cover slab of earth pit reinforced with 8mm dia TMT bars @ 10cm C/C both ways and with handle made out of 10mm dia bars, funnel, strainer, including salt & charcoal and testing on completion including dismantling unserviceable earthing complete all as specified and as directed.

M & L for Socket outlet 3 Pin, 5 Amp flush type universal, 240 volts, complete as directed.

S&F bell push flush type 5 Amp, 240 volt complete all as specified and as directed.

S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep 120 watt complete all as specified and as directed.

S&F bell bell ding-dong AC 240 V single pole complete all as specified and as directed.

Taking down existing u/s light fitting and S&F in repair wall fancy light fitting with B-22 type holder point with LED bulb 9 watt 230 volts necessary fixing arrangements complete all as specified and as directed.

Supply and fixing DB with sheet metal enclouser 240 volts, 04 way with rated bus bar single pole & neutral double door for MCB, including cutting chases for DB of required size and making good disturbed surface area and putting blanking plate if required including taking down old unserviceable one complete all as specified and as directed.

S&F MCB, TPN, 10 KA, 415 V. "C" curve, 40 A , ISI marked complete all as specified and directed

M&L for concealed sub main wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 10 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 10 sqmm as in continuous earth wire drawn into and including rigid non-metalic ISI marked PVC medium grade conduit with all fittings and fixings accessories including taking down existing complete all as specified and as directed. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.

S&F in repair PVC ventilation fan AC , single phase, 230/240 V, of size 250mm sweep body including making holes on wall & making good the disturbed surfaces with all connecting arrangements complete all as specified and as directed.

Supply and fixing in repair direct connected single phase-2 wire energy meter having current 10-60A accuacy class 1.0 with backlight LCD display , interoperable DLMS protocol for meter reading option for remote reading port also having internal battery and with hinge type transparent box unit complete all as specified and as directed. Make secure model: Saral or equivalent as approved by GE.

S&F steel tubular swaged poles type 410 SP-31, 9 mtr long complete with CI base plate and finial taper plug bolts nuts and screws complete all as specified and directed

S&F in repair LED security light fittings of 72 w , die cast Alluminium body with IP 66 protection with high powered LED as light source with intedrated driver and surge protection complete all as specified and directed

M&L for street light bracket made out of MS angle/flat iron suitable for fixing of street light complete all as specified and directed

Supply & fixing of weather proof PVC insulated copper conductor cable 1.5 sqmm 3 core duly inserting the cable inside the pole including making hole on top and bottom on the steel pole complete all as specified and as directed.

Supply and fixing thermoplastic polycarbonate street light junction box suitable for protection IP 66/67 "weather proof" for outside installation with metric knockout entry for cable of size 10-16 sqmm and size 155x210x92mm with terminals and provision of one MCB SP 6A complete with fixing arrangements on 40mm dia GI pipe 1 mtr long (light grade) with necessery clamps incl necessery cable connections all as specified and as directed of Make Hensel/ Sintax/C&S. Note: Rate of all necessery connected items such as MCB SP, GI pipe, clamps etc are deemed to be included in quoted rates.

M&L for PCC 1:3:6 type C-2 (40 mm graded crushed stone aggregate) as in foundation, of pole/stay including framework where required complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (20mm graded crushed stone aggregate) as in grouting, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for PCC 1:4:8 type C-2 (40 mm graded crushed stone aggregate) as in base foundation of pole/stay including framework where required complete all as specified and as directed.

Excavation in trenches not exc 1.5 mtr in depth, and n.exc 1.5 mtr in depth for laying of pipe/cables/ Poles and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exc 1.5 mtr in depth, and n.exc 2.0 mtr in depth for laying of pipe/cables/ Poles and getting out in hard/dense soil complete all as specified and as directed.

Returning,filling in,including spreading,levelling,watering and well ramming in layers not exceeding 25 cm thick all as specified and as directed.

Removing excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point all as specified and as directed.

Supply and laying in trenches/wall LT UG XLPE insulated ,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16sq mm 2 core including making necessery connections all as specified and as directed.

Supply & laying in trenches clear sand for cushioning under cable 8 cm below and 15 cm above complete in level all as specified and directed by Engr-in-Charge. Note:- Punned thickness shall be measured.

Supply and laying burnt clay sub class B brick as cable protection all as specified and directed.

Supply and fixing GI pipe 40mm bore medium grade for cable protection complete all as specified and as directed.

Supply and laying in trenches/wall LT UG XLPE insulated ,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16sq mm 4 core including making necessery connections all as specified and as directed.

NARESH GUPTA

M/S Bikash Saha

SRI SURAJIT SENGUPTA

RAJIV DEY SARKER

M S ALOK SAHA

M/s SHRI SATPAL SINGH

M/s. STRUCTURES INDIA