Annual rate contract for the Work of Routine Breakdown maintenance of 33 11 0.4 KV electrical distribution system Operation and preventive maintenance of 11 KV switchgear panel of 33 11 kV Sub Station Preventive Breakdown maintenance of Distribution

Amount

Routine maintenance of Electrical distribution system & lighting system in residential/Non residential buildings and Offices of PTEP, Panki, Kanpur. Note- Each job shall constitute maintenance working for specidied time (mention in Scope of work S. No. 1), during which contractor shall be required to attend all of the noticed/reported problem as specified in scope of work.

Operation of 11 KV switchgear panel of 33/11KV S/S inside plant. Note: Each job constitutes operation of 08 hours. (as mentioned in scope of work S. No. 2).

Work of attending NO Supply of electricity in residential/Non residential buildings and Offices of PTEP, Panki, Kanpur. (if electricity supply disturbed from pole). Work has to be carried out in specified time (as mentioned in scope of work S.N. 3).

Work of attending NO Supply of electricity in residential/Non residential buildings and Offices of PTEP, Panki, Kanpur. (if electricity supply disturbed from D.B./main switch/circuit board). Work has to be carried out in specified time (as mentioned in scope of work S. N. 4)

Work of Connection & Disconnection of cables in main switch in residential/Non residential buildings and Offices of PTEP, Panki, Kanpur. Work has to be carried out in specified time (as mentioned in scope of work S. N. 5) 63 A to 200 A

Work of Connection & Disconnection of cables in main switch in residential/Non residential buildings and Offices of PTEP, Panki, Kanpur. Work has to be carried out in specified time (as mentioned in scope of work S. N. 5) 400A to 630A

Replacement work of main switch (including connection & disconnection and lugging of cables) in residential/Non residential buildings and Offices of PTEP, Panki, Kanpur. Work has to be carried out in specified time (as mentioned in scope of work S. N. 6) 63 amp to 200 amp

Replacement work of main switch (including connection & disconnection and lugging of cables) in residential/Non residential buildings and Offices of PTEP, Panki, Kanpur. Work has to be carried out in specified time (as mentioned in scope of work S. N. 6) 400 amp/630 amp

Cutting of Switch /Socket point in Mica sheet as following. (Mica sheet Will be provided by department free of cost) 5/15 Amp. Switch/Socket (as mentioned in scope of work S. N. 7)

Complete overhauling & servicing of 11 KV TPMO of inside plant of PTEP and its various colonies. (as per scope of work S. N. 8)

Work of Primary inspection of core of distribution transformer up to 630 KVA of inside PTEP and its various colonies. (as per scope of work S. N. 9)

Work of replacement of damaged LV/HV leg coils with insulation of 11/0.4 KV, 630 KVA/500KVA/400KVA/250 KVA transformers. (as per scope of work S. N. 10)

Work of draining and filling of oil in distribution transformers of inside PTEP and its various colonies. (as per scope of work S. N. 11)

Work of replacement of distribution transformer up to 630 KVA by spare transformer. (as per scope of work S. N. 12)

Work of painting of transformer up to 630 KVA of inside PTEP and its various colonies. (as per scope of work S. N. 13)

Painting of 33/11 KV, 5MVA Transformer of 33/11 KV sub station inside PTEP. (as per scope of work S. N. 13)

Work of complete overhauling of 11 KV OCB/VCB of 33/11 KV sub station inside PTEP. (as per scope of work S. N. 14)

Work of complete overhauling of 11 KV incomer OCB/VCB with P.T. of 33/11 KV sub station inside PTEP. (as per scope of work S. N. 15)

Work of complete overhauling of 0.4 KV ACB/OCB of switch gear panel of 11/0.4 KV sub station, Officers Clony. (as per scope of work S. N. 15)

Work of replacement of damaged CT of 11KV OCB/VCB, CT will be provide by department free of cost. (as per scope of work S. N. 16)

Complete overhauling of 11 KV bus duct of 33/11 KV sub station inside PTEP (of 3 nos feeder with 1 no incomer feeder of 11 KV OCB/VCB Panel). (as per scope of work S. N. 17)

Work of replacement of gasket sheet of distribution transformers up to 630 KVA of inside PTEP and its various colonies. (as per scope of work S. N. 18)

To attending the oil Leakage of 11/0.4KV Transformer of PTEP in top LT/HT bushing, required material arranged by contractor at his own cost. (as per scope of work S. N. 19)

To attending the oil Leakage in gasket washers of LT/HT busing and top callers of LT/HT Rod of 33/11KV, 5MVA T/F of PTEP required material arranged by contractor at his own cost. (as per scope of work S. N. 20)

To attending the oil leakage of 33/11KV, 5MVA T/F of PTEP after replacement of top cover gasket and gasket washers of busing and callers & LT/HT rods required material arranged by contractor at his own cost. (as per scope of work S. N. 21)

Preventive checking & filling of new / centrifuging transformer oil in 5MVA, 33/11 KV transformer of PTEP up to required Level in conservator. This work includes shifting of oil drums from EDD stores to sub-station, changing of new silica gel and testing of transformers. (new silica gel will be arranged by the contractor at his own cost and T/F oil will be provided by the department free of cost) (as per scope of work S. N. 22)

Preventive checking & filling of new/centrifuging transformer oil in 11/.4 KV transformers of PTEP up to required Level in conservator. This work includes shifting of oil drums from EDD stores to sub-station, changing of new silica gel and testing of transformers (new silica gel will be arranged by the contractor at his own cost and T/F oil will be provided by the department free of cost) - 400/500/630 KVA (as per scope of work S. N. 22)

Preventive checking & filling of new/centrifuging transformer oil in 11/.4 KV transformers of PTEP up to required Level in conservator. This work includes shifting of oil drums from EDD stores to sub-station, changing of new silica gel and testing of transformers (new silica gel will be arranged by the contractor at his own cost and T/F oil will be provided by the department free of cost) 250/100KVA (as per scope of work S. N. 22)

Work of cleaning and epoxy coating on 11KV epoxy C.T. (EPOXY, Emery paper, Petrol will be arranged by the contractor at his own cost) (as per scope of work S. N. 23)

Repairing/Replacement of burnt/damaged epoxy C.T. (11 kv) with new one of ratio 200/100/5 OR 600/300/5 OR 400/200/ 5 OR 200-100/1-1 of 11 KV Breaker panel (GEC/L&T make) at 33/11 kV sub station inside plant Compatible to the existig system. (CT will be provided by the contractor at his own cost.) (guarantee of New C.T. will be 12 months) (as per scope of work S. N. 23)

Repairing of burnt/damaged 11 KV GEC make oil filled P.T. with replacement of defective components like backelised paper bushing, porcelain insulators, HRC Fuse, Male & Female contacts and rewinding of coils with same gauge, ‘A’ class super enamel copper wire, including cleaning and varnish with good quality chemicals, testing and calibration with all labour T&P etc. All materials as noted above will be provided by the contractor at his own cost. The scrap materials will be the property of the contractor. (guarantee of repaired P.T. will be 6 month) (as per scope of work S. N. 23)

Centrifuging of transformer oil with conecting centrifuging machine pipe lines and circulate the transformer oil by centrifuging machine and take IR and BDV value periodically to obtain required value. 11/0.4 KV, 250 KVA (as per scope of work S. N. 23)

Centrifuging of transformer oil with conecting centrifuging machine pipe lines and circulate the transformer oil by centrifuging machine and take IR and BDV value periodically to obtain required value. 11/0.4 KV, 400/500/630KVA (as per scope of work S. N. 23)

Centrifuging of transformer oil with conecting centrifuging machine pipe lines and circulate the transformer oil by centrifuging machine and take IR and BDV value periodically to obtain required value. 33/11 KV, 5 MVA (as per scope of work S. N. 23)

Replacement of damaged silica gel pot with new one along with silica gel (material shall be arranged by the firm) (as per scope of work S. N. 23)

Supply and fixing of Male contact (copper make Poker) for GEC make 11 KV OCB (KAD Type) of 1200 Amp. Capacity (as per scope of work S. N. 23)

Supply and fixing of Female contact finger with Tip and Lamination (copper make) for GEC make 11 KV OCB (KAD Type) of 1200 Amp. capacity. (as per scope of work S. N. 23)

Supply and fixing of Speed control device assembly for GEC make 11 KV OCB (KAD Type) of 1200 Amp. capacity. (as per scope of work S. N. 23)

Replacement of Terminal bushing for GEC make 11 KV OCB (KAD Type) of 1200 Amp capacity/Terminal bushing (Contact Arm) for L&T make 11 KV VCB of 1250 Amp capacity. (supply by the contractor at his own cost.) (as per scope of work S. N. 23)

Replacement of Bevel Gear for GEC make 11 KV OCB (KAD Type) of 1200 Amp capacity. (supply by the contractor at his own cost.) (as per scope of work S. N. 23)

Replacement of 24 V DC Coil Assly for GEC make 11 KV OCB (KAD Type) of 1200 Amp./L&T make 11 KV VCB of 1250 Amp capacity. (supply by the contractor at his own cost.) (as per scope of work S. N. 23)

Replacement of TULIP CONTACT Assly (copper make) for GEC make 11 KV OCB (KAD Type) of 1200 Amp. Capacity/FINGER CONTACT Assly (copper make) for L&T make 11 KV VCB of 1250 Amp. capacity. (supply by the contractor at his own cost.) (as per scope of work S. N. 23)

Replacement of Link mechanism Assly for GEC make 11 KV OCB (KAD Type) of 1200 Amp. capacity. (supply by the contractor at his own cost.) (as per scope of work S. N. 23)

Replacement of Main Latch for GEC make 11 KV OCB (KAD Type) of 1200 Amp.capacity. (supply by the contractor at his own cost.) (as per scope of work S. N. 23)

Replacement of Trip lever for GEC make 11 KV OCB (KAD Type) of 1200 Amp.capacity. (supply by the contractor at his own cost.) (as per scope of work S. N. 23)

Replacement of R/Y/B Phase Bus Bar/Direct Spout with fitting for GEC make 11 KV OCB (KAD Type) of 1200 Amp capacity/L&T make 11 KV VCB of 1250 Amp capacity. (supply by the contractor at his own cost.) (as per scope of work S. N. 23)

Providing and fixing of 11/0.4 KV T/F LT side bushing. 630 KVA (as per scope of work S. N. 23)

Providing and fixing of 11/0.4 KV T/F LT side bushing. 500 KVA (as per scope of work S. N. 23)

Providing and fixing of 11/0.4 KV T/F LT side bushing. 400 KVA (as per scope of work S. N. 23)

2Providing and fixing of 11/0.4 KV T/F LT side bushing. 250 KVA (as per scope of work S. N. 23)

Providing and fixing of 11/0.4 KV T/F HT bushing (as per scope of work S. N. 23)

Repairing & Rewinding of Single Phase Servomotor for spring Charge (as per scope of work S. N. 23)

Replacement of Limit Switch for L&T make 11 KV VCB Panel (as per scope of work S. N. 23)

Replacement of ABB make Vacuum Interrupter for L&T make 11 KV VCB of 1250 Amp.capacity. (supply by the contractor at his own cost) (as per scope of work S. N. 23)

Repairing of 230/30 V Battery Charger of Battery Bank. (as per scope of work S. N. 24)

Repairing of 24 V Power Pack of 11 KV VCB Panel (Including replacement of its Battery). (as per scope of work S. N. 24)

Repairing/Overhauling and testing of Relays of incoming/outgoing panels (as per scope of work S. N. 25)

Complete Overhauling of 33 KV Isolator. (The work includes cleaning & Greasing of all moving parts applying petroleum jelly & Proper adjustment of Jaws & Blades in the Electrical contacts, Cleaning of Jaws & Blade Contacts, Tightening of Terminal Connectors, Replacement of Nut & Bolts if required, Painting of Isolator base Channels, handle bar etc.) (as per scope of work S. N. 26)

S/F of 33 KV Isolatorr's Jaws/Jaw Base Plate (as per scope of work S. N. 26)

S/F of 33 KV Isolator Blade (as per scope of work S. N. 26)

S/F of of Terminal Connectors (as per scope of work S. N. 26)

S/F of 33 KV Isolator Fix Jaw with Base Plate (as per scope of work S. N. 26)

S/F of 33 KV Isolator Blade (as per scope of work S. N. 26)

S/F of Terminal Connector (Pad Clamp) (as per scope of work S. N. 26)

S/F of Terminal Connector (CT Clamp) (as per scope of work S. N. 26)

S/F of PG Clamp for Panther Conductor (as per scope of work S. N. 26)

fofHkUu lkbt dh iqjkuh@u;h vkeZM@ih0oh0lh0@ ,Dl0,y0ih0bZ0 dsfcy 33@11@1-1 dsoh dks lrg ij fcNkus dk dk;ZA ¼dk;Z fooj.k 27 ds vuqlkj½

fofHkUu lkbt dh iqjkuh@u;h vkeZM@ih0oh0lh0@ ,Dl0,y0ih0bZ0 dsfcy 33@11@1-1 dsoh dks lrg ij ls fjdojh djus dk dk;Z ¼dk;Z fooj.k 28 ds vuqlkj½

fofHkUu lkbt dh vksojgsM 33@11@1-1 ds0oh0 dh iqjkuh@u;h vkjeZM@ ih0oh0lh0@,Dl0,y0ih0bZ0 dsfcy mrkjus ,oaaa ejEer dj vksojgsM Mkyus dk dk;ZA ¼dk;Z fooj.k 29 ds vuqlkj½

fofHkUu lkbt dh iqjkuh@u;hvkeZM@ih0oh0lh0@,Dl0,y0ih0bZ0 dsfcy 33@11@1-1 dsoh dks Hkwfexr fcNkus dk dk;ZA ¼dk;Z fooj.k 30 ds vuqlkj½

fofHkUu lkbt dh Hkwfexr {kfrxzLr 33@11@1-1 dsoh vkjeZM@ih0oh0lh0@ ,Dl0,y0ih0bZ0 dsfcy dks [kqnkbZ djds ckgj fudkyukA ¼dk;Z fooj.k 31 ds vuqlkj½

fofHkUu lkbt dh 33@11@1-1 ds0oh0 dh iqjkuh@u;h vkjeZM@ih0oh0lh0@ ,Dl0,y0ih0bZ0 dsfcy vksoj gsM Mkyus dk dk;ZA ¼dk;Z fooj.k 32 ds vuqlkj½

fofHkUu lkbt dh vksojgsM 33@11@1-1 ds0oh0 dh iqjkuh@u;h vkjeZM@ ih0oh0lh0@,Dl0,y0ih0bZ0 dsfcy mrkjus dk dk;ZA ¼dk;Z fooj.k 33 ds vuqlkj½

0-4 dsoh fo|qr ykbuksa esa Lislj cka/kus dk dk;ZA ¼dk;Z fooj.k 34 ds vuqlkj½

11@0-4 dsoh fo|qr ykbuksa esa xkMZ ok;j cka/kus dk dk;ZA ¼dk;Z fooj.k 35 ds vuqlkj½

iqjkus ;k vumi;ksxh iksy dks m[kkM+uas dk dk;ZA ¼dk;Z fooj.k 36 ds vuqlkj½

u;s iksy ;k m[kkM+s x;s iksy yxkus dk dk;ZA ¼dk;Z fooj.k 37 ds vuqlkj½

iksy dh fifyUFk dk dk;ZA ¼dk;Z fooj.k 38 ds vuqlkj½

33@11@0-4 ds0oh {kfrxzLr vksojgsM fo|qr ykbusa mrkjus dk dk;ZA dk;Z fooj.k 39 ds vuqlkj½

33@11 ds0oh u;h@iqjkuh ejEer dh gq;h vksojgsM fo|qr ykbusa yxkus o fjlSfxax dk dk;Z A dk;Z fooj.k 40 ds vuqlkj½

0-4 ds0oh u;h@iqjkuh ejEer dh gq;h vksojgsM fo|qr ykbusa yxkus o fjlSfxax dk dk;ZA ¼dk;Z fooj.k 40 ds vuqlkj½

LVs xzkmfVax dk dk;Z A ¼dk;Z fooj.k 41 ds vuqlkj½

11@0-4 ds0oh vksoj gsM fo|qr ykbuksa dh fjlSsfaxx dk dk;ZA ¼dk;Z fooj.k 42 ds vuqlkj½

11@0-4 dsoh fo|qr ykbuksa esa gq, czsd Mkmu dk QkYV Bhd djus dk dk;aZA ¼dk;Z fooj.k 43 ds vuqlkj½

33@11 ds0oh fo|qr ykbu ds {kfrxzLr bUlqysVj dks cnyus dk dk;ZA ¼bUlwysVj foHkkx nsxk½ ¼dk;Z fooj.k 44 ds vuqlkj½

33@11 ds0oh fo|qr ykbu ds {kfrxzLr bUlqysVj dks cnyus dk dk;ZA ¼bUlwysVj lafonkdkj vius [kpsZ ij ykdj cnysxk½ ¼dk;Z fooj.k 44 ds vuqlkj½

0-4 ds0oh fo|qr ykbu ds {kfrxzLr bUlqysVj dks cnyus dk dk;ZA ¼bUlwysVj foHkkx nsxk½ ¼dk;Z fooj.k 44 ds vuqlkj½

0-4 ds0oh fo|qr ykbu ds {kfrxzLr bUlqysVj dks cnyus dk dk;ZA ¼bUlwysVj lafonkdkj vius [kpsZ ij ykdj cnysxk ½ ¼dk;Z fooj.k 44 ds vuqlkj½

33@11@0-4 ds0oh0 vksojgsM fo|qr ykbu ds {kfrxzLr tEij cnyus dk dk;ZA ¼tEij foHkkx nsxk½ ¼dk;Z fooj.k 45 ds vuqlkj½

33@11ds0oh0 ¶;wt dks cnyus dk dk;ZA ¼dk;Z fooj.k 46 ds vuqlkj½

33@11 ds0oh0 VªkUlQkeZj ;k vks0lh0ch0 ds ,.M VfeZuYl ds dsfcy ¼rhuks Qst½ ds dusD”ku o fMLdusD”ku dk dk;Z A¼dk;Z fooj.k 47 ds vuqlkj½

11@0-4 ds0oh0 VªkUlQkeZj ;k 0-4 ds0oh0 ,0lh0ch0 ds ,.M VfeZuYl ds dsfcy ¼rhuks Qst½ ds dusD”ku o fMldusD”ku dk dk;ZA ¼dk;Z fooj.k 48 ds vuqlkj½

Hkwfexr {kfrxzLr 33 ds0oh0 fo|qr ykbu ds 3 x 240 ,e ,e LDok;j rd ds ,Y;wqfefu;e@,Dl0,y0ih0bZ0 dsfcy ds fdlh Hkh ,d fljs ds {kfrxzLr dsfcy ckDl dks gVkdj u;k dsfcy ckDl cukus dk dk;ZA ¼dsfcy ckDl foHkkx nsxk½A ¼dk;Z fooj.k 49 ds vuqlkj½

Hkwfexr {kfrxzLr 33 ds0oh0 fo|qr ykbu ds 3 x 240 ,e ,e LDok;j rD ds ,Y;wqfefu;e@,Dl0,y0ih0bZ0 dsfcy dk u;k LVªsV Fkzw dsfcy ckDl cukus dk dk;ZA ¼dsfcy ckDl foHkkx nsxk½A ¼dk;Z fooj.k 49 ds vuqlkj½

Hkwfexr {kfrxzLr 11 ds0oh0 fo|qr ykbu ds 3 x 150 ,e ,e LDok;j rd ds ,Y;wqfefu;e@,Dl0,y0ih0bZ0 dsfcy ds fdlh Hkh ,d fljs ds {kfrxzLr dsfcy ckDl dks gVkdj u;k dsfcy ckDl cukus dk dk;ZA ¼dsfcy ckDl foHkkx nsxk½A ¼dk;Z fooj.k 49 ds vuqlkj½

Hkwfexr {kfrxzLr 11 ds0oh0 fo|qr ykbu ds 3 x 150 ,e ,e LDok;j rD ds ,Y;wqfefu;e@,Dl0,y0ih0bZ0 dsfcy dk u;k LVªsV Fkzw dsfcy ckDl cukus dk dk;ZA ¼dsfcy ckDl foHkkx nsxk½A ¼dk;Z fooj.k 49 ds vuqlkj½

Hkwfexr {kfrxzLr 1-1 ds0oh0 fo|qr ykbu ds 4 x 300 ,e ,e LDok;j rd ds ,Y;wqfefu;e@,Dl0,y0ih0bZ0 dsfcy ds fdlh Hkh ,d fljs ds {kfrxzLr dsfcy ckDl dks gVkdj u;k dsfcy ckDl cukus dk dk;ZA ¼dsfcy ckDl foHkkx nsxk½A ¼dk;Z fooj.k 49 ds vuqlkj½

Hkwfexr {kfrxzLr 1-1 ds0oh0 fo|qr ykbu ds 4 x 300 ,e ,e LDok;j rD ds ,Y;wqfefu;e@,Dl0,y0ih0bZ0 dsfcy dk u;k LVªsV Fkzw dsfcy ckDl cukus dk dk;ZA ¼dsfcy ckDl foHkkx nsxk½A ¼dk;Z fooj.k 49 ds vuqlkj½

ykbfVax iSuy@Qsuflax vkQ Vhu lsM dh isfUVax dk dk;Z A ¼dk;Z fooj.k 50 ds vuqlkj½

LVªhV ykbV iksy@jsy iksy dh isfUVax dk dk;ZA ¼dk;Z fooj.k 51 ds vuqlkj½

Earthing with GI earth pipe 4.5 M long, 40 MM dia including accessories and providing masonary enclosure with cover plate and watering pipe etc. with charcoal/coke and salt a required. (As per scope of work at sl.no. 52)

Providing and Fixing 25 MM x 5 MM GI strip on surface or in recess for connection of Pole, Transformer body, Neutral Point, Distribution Panel and Main Switch. (As per scope of work at sl.no. 53)

Supply and fixing of barbed wire on poles/Substation Fencing to prevent unwanted access to Electric Lines. (As per scope of work at sl.no. 54)

Work for Road restoration for PUCCA Road for laying of 01 Nos. HT/LT cable as per direction of concern AE/JE(EDD) (only XLPE armored cable, shall be provide by PTEP free of cost) (As per scope of work at sl.no. 55)

Work for Road restoration for PUCCA Road for laying of 02 Nos. HT/LT cable as per direction of concern AE/JE(EDD) (only XLPE armored cable, shall be provide by PTEP free of cost) (As per scope of work at sl.no. 55)

Work for Floor restoration for PUCCA Floor for laying of 01 No. HT/LT cable as per direction of concern AE/JE(EDD) (only XLPE armored cable, shall be provide by PTEP free of cost) (As per scope of work at sl.no. 56)

Work for Floor restoration for PUCCA Floor for laying of 02 No. HT/LT cable as per direction of concern AE/JE(EDD) (only XLPE armored cable, shall be provide by PTEP free of cost) (As per scope of work at sl.no. 56)

Work for Road /Floor restoration for footpath side for laying of 01 No. HT/LT cable carrier etc. as per direction of concern AE/JE(EDD) (only XLPE armored cable, shall be provide by PTEP free of cost) (As per scope of work at sl.no. 57)

Work for Road /Floor restoration for footpath side for laying of 02 No. HT/LT cable carrier etc. as per direction of concern AE/JE(EDD) (only XLPE armored cable, shall be provide by PTEP free of cost) (As per scope of work at sl.no. 57)

Supply and fixing of Indoor heat shrinkable cable jointing kit with all accessories including ferrules suitable for 11 KV grade XLPE cable for 3 core 70 sq. mm TO 120 SQMM (Raychem/Denson/3M make) (As per scope of work at sl.no. 58)

Supply and fixing of Outdoor heat shrinkable cable jointing kit with lugs for 11 KV grade XLPE cable for 3 core 70 sq. mm TO 120 sqmm. (Raychem/Denson/3M make) (As per scope of work at sl.no. 58)

Supply and fixing of Straight through heat shrinkable cable jointing kit with ferrules for 11 KV grade XLPE cable for 3 core 70 sqmm to 120 sq. mm. (Raychem/Denson/3M make) (As per scope of work at sl.no. 58)

Supplying and erection of 11 kV Porcelain pin insulator complete with long steel head G.I. pin, nut, washer etc. as required.(As per scope of work at sl.no. 58)

Supplying and erection of 11 kV Porcelain disc insulator for 11 kV overhead lines with galvanized insulator fittings, ball and socket type, and complete with galvanized strain clamp,bolts, nuts washer etc. as required. (As per scope of work at sl.no. 58)

Supplying and erection of 33kV Porcelain pin insulator complete with long steel head G.I. pin, nut, washer etc. as required. (As per scope of work at sl.no. 58)

u;h lfoZl ykbu ¼dsfcy½ Mkyus vFkok iqjkuh@{kfrxzLr lfoZl ykbu dks u;h lfoZl ykbu ¼dsfcy½ ls cnyus dk o vFkZ ok;j Mkyus dk dk;ZA 4-0 ,e,e LDok;j ¼mijksDr dsfcy o vFkZ ok;j lafonkdkj }kjk ns; gksxh½ ¼dk;Z fooj.k 59 ds vuqlkj½

u;h lfoZl ykbu ¼dsfcy½ Mkyus vFkok iqjkuh @ {kfrxzLr lfoZl ykbu dks u;h lfoZl ykbu ¼dsfcy½ ls cnyus dk o vFkZ ok;j Mkyus dk dk;ZA 6-0 ,e,e LDok;j ¼mijksDr dsfcy o vFkZ ok;j lafonkdkj }kjk ns; gksxh½ ¼dk;Z fooj.k 59 ds vuqlkj½

u;h lfoZl ykbu ¼dsfcy½ Mkyus vFkok iqjkuh @ {kfrxzLr lfoZl ykbu dks u;h lfoZl ykbu ¼dsfcy½ ls cnyus dk o vFkZ ok;j Mkyus dk dk;ZA 10-0 ,e,e LDok;j ¼mijksDr dsfcy o vFkZ ok;j lafonkdkj }kjk ns; gksxh½ ¼dk;Z fooj.k 59 ds vuqlkj½

fo|qr iksyks esa yxh {kfrxzLr LVªhV ykbV ¼V~`;wc ykbV/LED½ fQfVax mrkjus dk dk;Z ¼dk;Z fooj.k 60 ds vuqlkj½

fo|qr iksyks ls mrkjh x;h {kfrxzLr LVªhV ykbV ¼V~`;wc ykbV/LED½ fQfVax Bhd dj yxkus dk dk;ZA ¼dk;Z fooj.k 61 ds vuqlkj½

fo|qr iksyks esa u;h LVªhV ykbV ¼V~`;wc ykbV/LED½ fQfVax yxkus dk dk;ZA ¼dk;Z fooj.k 62 ds vuqlkj½

fo|qr iksyks esa yxh {kfrxzLr LVªhV ykbV ¼,p ih ,l oh@,p ih ,e oh ykbV@esVy gsykbM½ fQfVax mrkjus dk dk;Z A ¼dk;Z fooj.k 63 ds vuqlkj½

fo|qr iksyks ls mrkjh x;h {kfrxzLr LVªhV ykbV ¼,p ih ,l oh@,p ih ,e oh ykbV@esVy gsykbM½ dks Bhd dj yxkus dk dk;ZA ¼dk;Z fooj.k 64 ds vuqlkj½

fo|qr iksyks esa u;h LVªhV ykbV¼,p ih ,l oh@,p ih ,e oh ykbV@esVy gsykbM½ dks yxkus dk dk;ZA ¼dk;Z fooj.k 65 ds vuqlkj½

Supplying and fixing of 32/40mm dia. X 2.00 mtr. Long G.I.pipe (Medium class) bracket for mounting of fluorescent /S.V/ M.H/ L.E.D Lamp street light fittings on poles including bending the pipe to the required shape and wiring with 1.5Sq.mm W.P. / PVC wire etc. as required. (As per scope of work at sl.no. 66)

11 ds0oh0/ 0-4 ds0oh0 fo|qr vksoj gsM ykbuksa ds utnhd ds isM+ksa dh NVkbZ dk dk;ZA ¼dk;Z fooj.k 67 ds vuqlkj½

11 ds0oh0/ o-4 ds0oh0 fo|qr vksoj gsM ykbuksa ds utnhd ds cM+s isM+ksa dh NVkbZ dk dk;ZA ¼dk;Z fooj.k 68 ds vuqlkj½

33@11 ds0oh0 vFkok 11@0-4 ds0oh0 ds lcLVs'kuksa dh lQkbZ dk dk;Z A ¼dk;Z fooj.k 69 ds vuqlkj½

11 ds0oh0/0-4 ds0oh0 dh vksoj gsM ykbuksa ds uhps lQkbZ dk dk;ZA ¼dk;Z fooj.k 70 ds vuqlkj½

S.A. Enterprises