Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.7 LAccepted-AOC HOUSE NO 40 CHOTTI BARADARI PART I GARHA ROAD NEAR MEDICAL COLLEGE JALANDHAR PB 144022 | JALANDHAR | JALANDHAR | PUNJAB | 144022 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹33.9 L+₹5.1 L (17.9%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹34.1 L+₹5.4 L (18.6%)Rejected-Finance KOHLI NO 17509 GALI KHADDAR BHANDAR WALI BHI WALA ROAD BATHINDA PB 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹34.5 L+₹5.8 L (20.2%)Rejected-Finance OPP R S D COLLEGE NH 354 MAHAR MAHAMMAD KUA FEROZPUR | FIROZEPUR | PUNJAB | 142044 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹35.5 L+₹6.8 L (23.8%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
| Sl No | Description | Qty | Unit | M/s NIRMAN BUILDERS L6 | Karan Engineers L8 | SRI SAI CONSTRUCTION COMPANY L7 | UNITED ENGINEERING CORPORATION L1 | M/s BHUPINDRA ENGINEERING WORKS L3 | Kaul Enterprises L5 | M/s G.V.T. Constructions L4 | P.K ENTERPRISES L9 | AGGARWAL TRADERS L2 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | S&F Galvanized steel High Mast of 16 Mtrs height lighting system in two section, 3 mm section thickness, top dia not less than 150mm & bottom dia not less than 340 mm with its accessories including foundation bolts manufactured from special steel and Hot Dip Galvanised along with nuts, washers, anchor plates and templates, feeder pillar panel control and raising & lowering mechanism for integral power tool, Twin aviation Lamp etc. Mast shaft shall be in two sections, hot dip galvanized and suitable for wind velocity as per IS 875 part 3 minimum 180 km per hour. It shall also include accessories for high mast including head frame, steel wire rope (7/19 construction) double drum which is operated by motor gear mechanism with inbuilt starter, Timer and feeder piller panel, Galvanized Lantern carriage arrangement 'suitable for 08 Nos.luminaires Symmetrically & its control gear boxes and with 03 point suspension system. The mast shall have an integral power tool installed inside the base compartment for its operation. ( Material construction of high mast sheet will be of BSEN 10025 / IS 5986 or equivalent ). with wiring cable for luminaire connection including suitable size of foundation for 16.0 mtr high mast considering the soil bearing capacity 10 T / Sq. mtr at 2 meter depth and using RCC M-25 grade (design mix) concrete with reinforcement,form work,earthwork complete all as per manufacturers instructions and as directed by Eng-in-charge. Note:- a) Making of civil foundation for erection of high mast and feeder pillar panel as per manufacturer recommendation demeed to be included in the unit rate.
b) Cable of required size and length from top to bottom for connection of LED flood light an related switchgears included in above quoated rate. Make:- Cormpton, Bajaj, Halonix | 8 | Each Job | 3,31,000 ₹26,48,000 | 3,40,000 ₹27,20,000 | 2,95,000 ₹23,60,000 | 2,50,000 ₹20,00,000 Lowest | 3,00,000 ₹24,00,000 | 3,20,000 ₹25,60,000 | 3,20,000 ₹25,60,000 | 2,80,000 ₹22,40,000 | 2,94,000 ₹23,52,000 |
| 2.00 | Supply and fixing LED flood light fittings with and including lamp 210W rating, separate individual peanut plated Lens housing should be made of LM6 Pressure die Cast Aluminum . Optical cover should be only Toughened Glass only, IP Protection not less than IP 66, Protection should be Class I,Product Standard IS 10322/IEC 60598, Driver Operating Voltage should be 140 V-270V, Driver Frequency 50Hz, Power Factor>0.9, Lumen output should not be less than 100 Lumen/watt and Luminaries with separate external surge protection device 4 Kv to 10 kv rating and separate connector block for termination of incoming cable connection all as specified and directed. Make- Crompton/Bajaj/Halonix | 64 | Each | 7,500 ₹4,80,000 | 8,800 ₹5,63,200 | 9,300 ₹5,95,200 | 7,200 ₹4,60,800 | 7,250 ₹4,64,000 | 8,499 ₹5,43,936 | 7,550 ₹4,83,200 | 18,000 ₹11,52,000 | 6,000 ₹3,84,000 Lowest |
| 3.00 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as directed. | 1,300 | RM | 189 ₹2,45,700 | 180 ₹2,34,000 | 190 ₹2,47,000 | 176 ₹2,28,800 | 190 ₹2,47,000 | 184 ₹2,39,200 | 166 ₹2,15,800 Lowest | 190 ₹2,47,000 | 216 ₹2,80,800 |
| 4.00 | Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundations or laying cables/pipes etc. and getting out in soft/loose soil all as specified and directed by Engr-in-charge. | 236.93 | CuM | 100 ₹23,693 | 70 ₹16,585.1 Lowest | 80 ₹18,954.4 | 152 ₹36,013.36 | 100 ₹23,693 | 99 ₹23,456.07 | 120 ₹28,431.6 | 250 ₹59,232.5 | 150 ₹35,539.5 |
| 5.00 | Returning, filling in including spreading leveling, watering and well ramming in layers of Soft/loose soil not exceeding 25 cm thick complete all as specifiedand directed by Engr-in-charge. | 213.23 | CuM | 30 ₹6,396.9 | 70 ₹14,926.1 | 20 ₹4,264.6 Lowest | 52 ₹11,087.96 | 20 ₹4,264.6 Lowest | 40 ₹8,529.2 | 80 ₹17,058.4 | 120 ₹25,587.6 | 40 ₹8,529.2 |
| 6.00 | M&L Removal of excavated material to a distance not exc 50 mtr and depositing where directed at level not exc 1.5 mtr above the starting point complete all as specified and directed.by Engr-in-charge | 23.69 | CuM | 30 ₹710.7 | 90 ₹2,132.1 | 30 ₹710.7 | 51 ₹1,208.19 | 20 ₹473.8 Lowest | 40 ₹947.6 | 50 ₹1,184.5 | 220 ₹5,211.8 | 40 ₹947.6 |
| 7.00 | Supplying and laying double wall corrugated (DWC) duct pipe for electrical cable laying purpose, IS 16205, size OD-78 and ID-63 mm complete all as specified and directed. | 1,170 | RM | 90 ₹1,05,300 | 80 ₹93,600 | 280 ₹3,27,600 | 70 ₹81,900 | 190 ₹2,22,300 | 99 ₹1,15,830 | 65 ₹76,050 Lowest | 70 ₹81,900 | 250 ₹2,92,500 |
| 8.00 | M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of size upto 150 mm dia suitable for 0.4 mpa working pressure complete all as directed. | 14 | RM | 500 ₹7,000 | 150 ₹2,100 Lowest | 220 ₹3,080 | 400 ₹5,600 | 500 ₹7,000 | 1,000 ₹14,000 | 1,050 ₹14,700 | 1,500 ₹21,000 | 200 ₹2,800 |
| 9.00 | M&L for GI pipe light grade of sizes 40mm dia, ISI marked with all fitting for cable protection, laid in trenches, under road or fixing on wall/pole/ crossing nallah etc all as specified and as directed. | 14 | RM | 400 ₹5,600 | 550 ₹7,700 | 380 ₹5,320 | 400 ₹5,600 | 400 ₹5,600 | 500 ₹7,000 | 399.5 ₹5,593 | 200 ₹2,800 Lowest | 300 ₹4,200 |
| 10.00 | M & L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip 32x6mm GI strip by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as directed. | 8 | Each Job | 4,950 ₹39,600 | 10,000 ₹80,000 | 4,500 ₹36,000 | 4,999 ₹39,992 | 4,000 ₹32,000 | 5,000 ₹40,000 | 5,950 ₹47,600 | 5,000 ₹40,000 | 3,000 ₹24,000 Lowest |
Tender Value
₹43.0 L
EMD Value
₹85,900
Closing Date
24 Jul 2025, 6:00 pmClosed
GARRISON ENGINEER ABOHAR
GARRISON ENGINEER ABOHAR, PIN 152116, PB
PROVISION OF HIGH MAST SECURITY LIGHT NEAR SSI, TCP-1, ADM BLOCK HQ 89 INF BDE AND CHILDREN PARK AND RAW WATER INSTALLATION AT MIL STN ABOHAR
2025_MES_719525_1
TOKEN NO GE ABH-18/2025-26
Open Tender
Civil Works
Item Rate
180 days
ABOHAR MIL STN
AS PER NIT
7 documents required · 7 mandatory
₹500
Yes
₹85,900
Yes
1 Dec 2025
10 Jul 2025
26 Jul 2025
10 Jul 2025
24 Jul 2025
17 Jul 2025
Amount
S&F Galvanized steel High Mast of 16 Mtrs height lighting system in two section, 3 mm section thickness, top dia not less than 150mm & bottom dia not less than 340 mm with its accessories including foundation bolts manufactured from special steel and Hot Dip Galvanised along with nuts, washers, anchor plates and templates, feeder pillar panel control and raising & lowering mechanism for integral power tool, Twin aviation Lamp etc. Mast shaft shall be in two sections, hot dip galvanized and suitable for wind velocity as per IS 875 part 3 minimum 180 km per hour. It shall also include accessories for high mast including head frame, steel wire rope (7/19 construction) double drum which is operated by motor gear mechanism with inbuilt starter, Timer and feeder piller panel, Galvanized Lantern carriage arrangement 'suitable for 08 Nos.luminaires Symmetrically & its control gear boxes and with 03 point suspension system. The mast shall have an integral power tool installed inside the base compartment for its operation. ( Material construction of high mast sheet will be of BSEN 10025 / IS 5986 or equivalent ). with wiring cable for luminaire connection including suitable size of foundation for 16.0 mtr high mast considering the soil bearing capacity 10 T / Sq. mtr at 2 meter depth and using RCC M-25 grade (design mix) concrete with reinforcement,form work,earthwork complete all as per manufacturers instructions and as directed by Eng-in-charge. Note:- a) Making of civil foundation for erection of high mast and feeder pillar panel as per manufacturer recommendation demeed to be included in the unit rate. b) Cable of required size and length from top to bottom for connection of LED flood light an related switchgears included in above quoated rate. Make:- Cormpton, Bajaj, Halonix
Supply and fixing LED flood light fittings with and including lamp 210W rating, separate individual peanut plated Lens housing should be made of LM6 Pressure die Cast Aluminum . Optical cover should be only Toughened Glass only, IP Protection not less than IP 66, Protection should be Class I,Product Standard IS 10322/IEC 60598, Driver Operating Voltage should be 140 V-270V, Driver Frequency 50Hz, Power Factor>0.9, Lumen output should not be less than 100 Lumen/watt and Luminaries with separate external surge protection device 4 Kv to 10 kv rating and separate connector block for termination of incoming cable connection all as specified and directed. Make- Crompton/Bajaj/Halonix
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as directed.
Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundations or laying cables/pipes etc. and getting out in soft/loose soil all as specified and directed by Engr-in-charge.
Returning, filling in including spreading leveling, watering and well ramming in layers of Soft/loose soil not exceeding 25 cm thick complete all as specifiedand directed by Engr-in-charge.
M&L Removal of excavated material to a distance not exc 50 mtr and depositing where directed at level not exc 1.5 mtr above the starting point complete all as specified and directed.by Engr-in-charge
Supplying and laying double wall corrugated (DWC) duct pipe for electrical cable laying purpose, IS 16205, size OD-78 and ID-63 mm complete all as specified and directed.
M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of size upto 150 mm dia suitable for 0.4 mpa working pressure complete all as directed.
M&L for GI pipe light grade of sizes 40mm dia, ISI marked with all fitting for cable protection, laid in trenches, under road or fixing on wall/pole/ crossing nallah etc all as specified and as directed.
M & L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip 32x6mm GI strip by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as directed.
AGGARWAL TRADERS (BID ID -3369587)
M/s BHUPINDRA ENGINEERING WORKS (BID ID -3370407)
M/s G.V.T. Constructions (BID ID -3368997)
Kaul Enterprises (BID ID -3370409)
M/s NIRMAN BUILDERS (BID ID -3369524)
SRI SAI CONSTRUCTION COMPANY (BID ID -3370293)
Karan Engineers (BID ID -3369757)
P.K ENTERPRISES (BID ID -3370416)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .