Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
Tender Value
₹2 L
Closing Date
4 Jan 2022, 4:30 pmClosed
xen rew kathua
xen rew kathua
Constt. of kitchen shed HS Amualla and land leveling
2021_RDPR_155387_14
e-NIT No. 245 REW/K of 2021 Dated 29/12/2021
Open Tender
Civil Works
Item Rate
30 days
nagrota gujroo
sbd
2 documents required · 2 mandatory
₹500
Yes
xen rew kathua
Exempted
6 Jan 2022
29 Dec 2021
5 Jan 2022
30 Dec 2021
4 Jan 2022
30 Dec 2021
Amount
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth1m from cutting edge asdirected
Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)(Including all leads and lifts carriages of material by MT/HL)
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)(Including all leads and lifts carriages of material by MT/HL)
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)(Including all leads and lifts carriages of material by MT/HL
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more(Including all leads and lifts carriages of material by MT/HL)
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)(Including all leads and lifts carriages of material by MT/HL)
Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level
Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms
Under 20 cm wide
12mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 4 fine sand)(Including all leads and lifts carriages of material by MT/HL)
15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 4 fine sand)(Including all leads and lifts carriages of material by MT/HL
6mm thick cement mortar 1:3 (1 cement: 3 fine sand) including curing
Providing and laying flooring 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete (Including all leads and lifts carriages of material by MT/HL)
Finishing walls with colour washing New work (two or more coats applied @ 3.84 kg/10sqm)
Colour wash (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade
Providing wood work in frames of doors,windows, clerestory windows and others frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or with fasteners shall be paid for separately):SAL WOOD
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class deodar wood
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.
Providing and fixing CIB of approved size by way of making foundation in M10, Brickwork in 1:6 cement mortar including plastering with 1:4 cement mortar, painting and writings as per the directions of engineer incharge including all carriages , supply , complete job.
stage.html
html • 0.02 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .