Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.7 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹11.9 L+₹1.2 L (10.9%)Rejected-Finance | L2 | Rejected-Finance Not Lowest bidder | |
| 3 | L3₹12.1 L+₹1.3 L (12.6%)Rejected-Finance LIG 10 VIVEK NAGAR NAVIBAGH BHOPAL MADHYA PRADESH 462038 | BHOPAL | MADHYA PRADESH | 462038 | L3 | Rejected-Finance Not Lowest bidder | |
| 4 | L4₹12.9 L+₹2.2 L (20.7%)Rejected-Finance | L4 | Rejected-Finance Not Lowest bidder | |
| 5 | L5₹13.2 L+₹2.5 L (22.9%)Rejected-Finance 640 MAIN ROAD BABINA CANTT JHANSI UP 284401 | JHANSI | JHANSI | UP | 284401 | L5 | Rejected-Finance Not Lowest bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
19 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Dronachal
GE Dronachal, Dronachal Top, Neori Hills, Bhopal 462038
PERIODICAL SERVICES TO OTM ACCNS AT DRONACHAL BHOPAL
2022_MES_548449_1
8710/E8
Open Tender
Civil Works
Item Rate
270 days
Bhopal
Class-E, Category a (i) and as per NIT documents
6 documents required · 6 mandatory
₹500
Garrison Engineer Dronachal
₹40,000
Yes
12 Oct 2022
29 Aug 2022
21 Sept 2022
29 Aug 2022
19 Sept 2022
13 Sept 2022
30 Aug 2022 - 12 Sept 2022
Amount
M&L for Preparation of old decorated surfaces on walls including brooming scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and one coat of white wash on walls complete all as specified and directed.
M&L for Preparation of old decorated surfaces on ceiling. including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and one coat of white wash on ceilings complete all as specified and directed.
M & L for preparing old decorated surface of wall including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of oil bound distamper over old decorated wall surface complete all as specified and as directed
M &L for preparation of old existing surface of wall and applying one coat of cement base paint complete
M & L for preparation of old decorated surface of wall including brooming scrapping down, smoke spot, mass efflorescent, treding oil, greasy spots and stopping nail marks by applying white cement based putty in patches as required and applying two coats of exterior weather proof water base emulsion paint on wall all as specified and as directed.
M & L for complete removal of old existing treatment of wall including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, Washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and directed
M & l for applying 1mm thick (average) putty for smooth finish on prepared surface complete all as specified and as directed
M & L of applying two coats of oil bound distamper over puttied surface as above complete all as specified and directed
M & L for preparation of new / old puttied surface of wall and applying two coats of exterior weather proof water base emulsion paint over a coat of primer on wall all as specified and as directed.
Preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint as directed and specified.
All as per item No.10 above but on steel surfaces
Preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete.
Taking down cement plaster of any description including raking out joints, hackisng for key, scrubbing down with water etc.
Rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete .
-Ditto- all as per Srl item No. 14 here-in-before, but 15mm thick in cement mortar 1:4 finished fair and even smooth without using extra cement including integral waterproofing compound Note:- supply only of W P C shall be measured and paid separately.
Rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.
Supply only Integral water proofing compound
Supply and fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane including hacking out old broken glasses from patented glazing bars complete all as specified and directed
Supply and fixing 3 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane including hacking out old broken glasses from patented glazing bars complete all as specified and directed.
R K Sales
PRAGATI ELECTRICALS AND ELECTRONICS
PADAMSHRI CONSTRUCTION CO
M/s Ravi Traders
SHIV SHANKAR MISHRA
MODI CORPORATION
M/s H V Infra Projects
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .