Repair to external water supply pipe line and connected items and repair/maintenance of E/M installation at MFFR under GE (N) Bikaner

Amount

Excavating in trenches, not exc 1.5 metre wide and not exc 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipes, etc. not exc 10 Sqm on plan & not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated soil/material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed.

Dismantling and taking up or down DI pipe and connections of 200mm bore, laid in trenches, complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

Supply, laying, jointing and testing centrifugally cast Ductile Iron spun pressure pipes (Class K9) of 200 mm bore with internal cement mortar lining and external zinc coating (130 gm/sqm minimum) and bituminous finish layer (minimum thickness 70 microns) with socket & spigot ends (ISI marked) conforming to IS 8329-2000 suitable for push on rubber gasket/tyton joint laid in trenches complete all as specified & as directed. Note :- Excavation & earthwork, DI fittings / specials & joints shall be measured & paid for separately under relevant items of this Schedule.

Supply and fixing rubber gasket tyton joint (push on joint) including rubber ring suitable for 200mm bore socket & spigot DI pipe and fittings complete all as specified and as directed.

Dismantling and taking up or down DI pipe and connections of 150mm bore, laid in trenches, complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

Supply, laying, jointing and testing centrifugally cast Ductile Iron spun pressure pipes (Class K9) of 150 mm bore with internal cement mortar lining and external zinc coating (130 gm/sqm minimum) and bituminous finish layer (minimum thickness 70 microns) with socket & spigot ends (ISI marked) conforming to IS 8329-2000 suitable for push on rubber gasket/tyton joint laid in trenches complete all as specified & as directed. Note :- Excavation & earthwork, DI fittings / specials & joints shall be measured & paid for separately under relevant items of this Schedule.

Supply and fixing rubber gasket tyton joint (push on joint) including rubber ring suitable for 150mm bore socket & spigot DI pipe and fittings complete all as specified and as directed.

Dismantling and taking up or down steel water tubing and connections of 150mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

M&L for galvanized steel water tubing medium grade of 150 mm bore (ISI marked) with & including all fittings laid in trenches complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

Dismantling and taking up or down steel water tubing and connections of 100mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

M&L for galvanized steel water tubing medium grade of 100 mm bore (ISI marked) with & including all fittings laid in trenches complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

Dismantling and taking up or down steel water tubing and connections of 80mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

M&L for galvanized steel water tubing medium grade of 80 mm bore (ISI marked) with & including all fittings laid in trenches complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

Laying only, jointing and testing old serviceable galvanized steel water tubing medium grade of 80mm bore obtained serviceable vide serial item No. 14.00 here-in-before including cleaning the pipe from inside & outside properly including rust & mud removal, with & including new fittings and fixed to walls and ceilings or laid in floors, trenches etc in new or old position complete all as specified and as directed. Note : The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used.

Dismantling and taking up or down steel water tubing and connections of 50mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

M&L for galvanized steel water tubing medium grade of 50 mm bore (ISI marked) with & including all fittings laid in trenches complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

Laying only, jointing and testing old serviceable galvanized steel water tubing medium grade of 50mm bore obtained serviceable vide serial item No. 17.00 here-in-before including cleaning the pipe from inside & outside properly including rust & mud removal, with & including new fittings and fixed to walls and ceilings or laid in floors, trenches etc in new or old position complete all as specified and as directed. Note : The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used.

Dismantling and taking up or down steel water tubing and connections of 25mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

M&L for galvanized steel water tubing medium grade of 25 mm bore (ISI marked) with & including all fittings laid in trenches complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

Dismantling and taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

M&L for galvanized steel water tubing medium grade of 20 mm bore (ISI marked) with & including all fittings laid in trenches complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 150 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 150 mm bore, complete all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 100 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 100 mm bore, complete all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 80 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 80 mm bore, complete all as specified & directed.

Supply and fixing non return valve (NRV) of size 100mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, class ‘PN-1.6’, gun metal seat, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint complete all as specified and as directed including dismantling & taking out old unserviceable non return valve of 100mm bore.

Supply and fixing cast iron foot valve of size 80mm bore as per IS:4038 (ISI marked), swing type operation, flanged ends with rubber insertion sheet 3mm thick, nuts, bolts and washers including taking down old existing unserviceable foot valve of 80mm bore complete all as specified & as directed.

S&F 50 mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 50 mm bore, complete, all as specified & directed.

S&F 25 mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 25 mm bore, complete, all as specified & directed.

S&F 20 mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 20 mm bore, complete, all as specified & directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-15, suitable for 200 mm bore cast iron pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-15, suitable for 150 mm bore cast iron pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-15, suitable for 100 mm bore cast iron pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs HDPE/PVC detachable joint with rubber ring, ISI marked, suitable for 200 mm bore HDPE/PVC pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs HDPE/PVC detachable joint with rubber ring, ISI marked, suitable for 160/150 mm bore HDPE/PVC pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs HDPE/PVC detachable joint with rubber ring, ISI marked, suitable for 100 mm bore HDPE/PVC pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

Supply and fixing 10000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I & PS Sec-II and as directed including disconnecting & taking down the existing unserviceable water tank.

Supply and fixing 5000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I & PS Sec-II and as directed including disconnecting & taking down the existing unserviceable water tank.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 200mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 150mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 100mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 80mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking joint of GI pipe or fittings of 80mm bore by dismantling joint and re-jointing with & including replacement of unserviceable fitting and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking joint of GI pipe or fittings of 50mm bore by dismantling joint and re-jointing with & including replacement of unserviceable fitting and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking joint of GI pipe or fittings of 25mm bore by dismantling joint and re-jointing with & including replacement of unserviceable fitting and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking joint of GI pipe or fittings of 20mm bore by dismantling joint and re-jointing with & including replacement of unserviceable fitting and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in replacement MCCB, 4 Pole, 200 Amps, rupturing capacity 35 KA, 415 Volt grade, AC, 50 Hz, adjustable Thermal - Magnetic release type, complete all as specified & as directed.

S&F in replacement MCCB, 4 Pole, 100 Amps, rupturing capacity 25 KA, 415 Volt grade, AC, 50 Hz, Magnetic fixed type, complete all as specified & as directed.

S&F in replacement MCCB, 4 Pole, 63 Amps rating, rupturing capacity 16 KA, 415 Volt grade, AC, 50 Hz, Magnetic fixed type, complete all as specified & as directed.

S&F in replacement Three Phase terminal box suitable for three phase motor as per existing type & size with all necessary fixing arrangement such as copper lugs, nut, bolts, etc complete all as specified and as directed.

S&F in replacement electronic Power Contactor, 3 Pole, 18 Amp AC3 rating, 415 Volt, complete all as specified and as directed. Make : Type ‘MNX 18’ of L&T or equivalent in makes mentioned in Appendix 'B' here-in-after.

S&F in replacement motor Protection Relay suitable for 5 to 10 HP Pump set, 415 Volts, 50 Hz, 3 Phase, complete all as specified and as directed.

S&F in replacement electronic Power Contactor, 3 Pole, 22 Amp AC3 rating, 415 Volt, complete all as specified and as directed. Make : Type ‘MNX 22’ of L&T or equivalent in makes mentioned in Appendix 'B' here-in-after.

S&F in replacement motor Protection Relay suitable for 20 HP Pump set, 415 Volts, 50 Hz, 3 Phase, complete all as specified and as directed.

S&F in replacement electronic Power Contactor, 3 Pole, 25 Amp AC3 rating, 415 Volt, complete all as specified and as directed. Make : Type ‘MNX 25’ of L&T or equivalent in makes mentioned in Appendix 'B' here-in-after.

S&F in replacement motor Protection Relay suitable for 25 HP Pump set, 415 Volts, 50 Hz, 3 Phase, complete all as specified and as directed.

S&F in replacement star coupling of rubber for motor pumpset of capacity upto 40 HP complete all as specified and as directed.

Supply, laying, jointing and testing LT XLPE insulated screened, bedded, galvanised steel strip or wire armoured heavy duty electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 10 sqmm 4 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified including dismantling & taking out old unserviceable cable. Note :- Excavation & earth work shall be measured & paid for separately.

Supply, laying, jointing and testing LT XLPE insulated screened, bedded, galvanised steel strip or wire armoured heavy duty electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 25 sqmm 4 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified including dismantling & taking out old unserviceable cable. Note :- Excavation & earth work shall be measured & paid for separately.

Supply, laying, jointing and testing LT XLPE insulated screened, bedded, galvanised steel strip or wire armoured heavy duty electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 50 sqmm 3.5 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified including dismantling & taking out old unserviceable cable. Note :- Excavation & earth work shall be measured & paid for separately.

Disconnecting, dismantling & taking down old unserviceable LT Feeder Panel box of any size & capacity including all fixtures/accessories complete all as directed.

Supply, installing, commissioning and testing factory made and tested (CPRI type test certified) LT Feeder Pillar Box cubical type (KIOSK) of size 120x100x50cm (minimum), 415 Volt, 3 Phase & neutral, 4 wire, 50 Hz, AC supply system, protection class IP-53, dust & vermin proof for outdoor use, made out of CRCA sheet 3.15 mm thick, powder coated inside & outside of flint grey shade (RAL-7032), machine pressed, both side opening in two halves with provision of rubber beading and locking system, including aluminium bus bar of 600 Amp capacity, 4 strip in colour code mounted on porcelain insulator, bus bar chamber shall be provided with inspection covers for each MCCB/cubical switch shall have the independent opening, panel shall be mounted on angle iron frame and legs made from angle of size 50x50x6 mm including internal wiring with PVC insulated stranded copper conductor FRLS cables of appropriate size but not less than 4 sqmm with proper ferrule & cable glands, including danger notice plate, comprising & including the following accessories complete all as specified and as directed :- (Contd…)

Notes for serial item No. 64.00 :- (i) Vertical height of legs of LT panel base frame shall be not less than 45 cm from top of nearest road level / PCC floor finish. Legs shall be grouted in PCC (1:3:6) type C1 (using 20 mm graded crushed stone aggregate). (ii) The contractor shall produce and get the detailed drawings of LT Panel approved from GE before fabrication and placing the order to the approved manufacturer. (iii) The quoted rate shall deemed to include supply & provision of built in flush type locks (with 02 keys) of superior quality as directed by Engineer in Charge. (iv) MS frame work shall be painted with two coats of synthetic enamel paint of approved tint over a coat of red oxide primer. (v) Cost of MS frame work, painting, platform, MCCB spreaders, cable glands, locking arrangement with lock and key and any minor addition/alteration where required at site (the decision of GE will be final and binding regarding extent to which the change can be considered as minor addition/alteration) shall be deemed to be included in the quoted rates.

M&L for preparation of old surfaces (plastered or unplastered) of walls including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash complete all as specified & as directed.

M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil emulsion distemper (OBD) of approved shade/tint complete all as specified & as directed.

M&L for preparation of old surfaces (plastered or unplastered) of ceilings including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coats of white wash complete all as specified & as directed.

M&L for preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint complete all as specified & as directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

Taking down cement plaster or cement lime plaster, terrazo etc on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, mixed with integral liquid water proofing compound as per manufacturer’s instructions, finished even & smooth without using extra cement, complete all as specified and directed. Note : Supply only integral liquid water proofing compound shall be measured and paid for separately.

Supply only integral liquid water proofing compound (ISI marked).

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over & including 3mm thick white wall care putty complete all as specified & as directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint over a coat of alkali resistant priming paint complete all as specified & as directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick (below or above ground level) including floor tiles of any description complete all as specified & as directed.

M&L for 75 mm thick PCC (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even, complete all as specified and as directed.

M&L for factory made 60mm thick machine pressed precast cement concrete coloured designer polished (reflecting type) interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and no pigment with coloured top casted in an automatic plant working on vibration and simultaneous hydraulic compression from top, laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & as directed. Note : Shape & colour of paver blocks shall be as approved by the GE.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brick work with old size Fly Ash bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B1, using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, roof kerbs, mud stops and the like including weathering, slightly rounded, chamfered angle and throating as directed including use and waste of form work (straight or curved) all exposed surface of concrete finished fair complete all as specified & as directed.

M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete, brick work, ground masonry, etc., including taking out embedded portion and making good disturbed ground, complete all as specified and as directed.

Dismantling fencing wire mesh of any type & any description fixed to any type of fencing posts complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering, and removing surplus soil to a distance not exc 50 m and making good surface in soft/ loose soil complete all as specified & as directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

S&F mild steel work as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

Fixing only mild steel galvanized chain link fencing, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire complete all as specified and as directed. Note :- Supply only chain link fencing shall be measured and paid for separately.

Supply only mild steel galvanized chain link fencing, any size or type as directed complete all as specified.

S&F mild steel round bars 8 to 10mm dia as in tie bars fixed to fencing posts including cut to length, bent to shape, welding of bar at spots as directed and other similar works, conforming to Grade E-165 (Fe 290), complete all as specified & as directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5 cm long and dia of neck 11 to 15 mm complete all as specified & as directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of Aluminium paint over a coat of aluminium red oxide primer complete all as specified and as directed.

S&F galvanized 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc complete all as specified & as directed. Note :- Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment.

M/S Shree Ram Enterprises

Gill Construction Co

MAHARISHI GAUTAM CONSTRUCTIONS