ADDITION/ALTERATION AND SPECIAL REPAIR TO CERTAIN BULDINGS AT WNC(O) MESS UNDER GE (NW) NOFRA COLABA MUMBAI

Amount

M&L for surface dressing n exc 15 cm deep and getting out soft / loose soil complete all as specified and directed by Engineer-in-charge.

M&L for excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-charge.

M&L for returning, filling in trenches including spreading, leveling watering and ramming in layers not exceeding 25cm complete all as specified and directed by Engineer-in-charge.

M&L for removing of surplus soil not exceeding 50 m and deposited where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed by Engineer-in-charge.

M&L for demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars,floos etc but exluding ashlars facings, dressed stone work and pre-cast concrete articles complete all as specified and directed by Engineer-in-charge.

M&L for demolition of stone slabs and tiles of any description or thickness in floors apron and laid, bedded and pointed in any mortar and removing of debries out side of MD land complete all as specified and directed by Engineer-in-charge.

M&L for Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge

M&L for Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc complete all as specified and directed by Engineer-in-charge.

M&L for taking down existing cement or cement lime plaster and preparation of surfaces of walls/ceiling of any description incl racking out joints backing for scrubbing down with water and any height including necessary scaffolding and removing debris out side MD land complete all as specified and directed by Engineer-in-charge.

M&L for rendering 5 mm thick cement plaster in brick or concrete surfaces using ready mix mortar as on ceiling finished even and smooth any height including necessary scaffolding complete all as specified and directed by Engineer-in-charge..

M&L for rendering cement plaster 10 mm thick in CM 1:3 on brick work/concrete surface finished even and smooth with out using extra cement on ceiling complete all as specified and directed by Engineer-in-charge.

M&L for rendering cement plaster on wall 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement etc complete all as specified and directed by Engineer-in-charge.

M&L for plastering in ready mix mortar, 15mm thick on fair faces of brick work or concrete surfaces of walls finished fair and even any height including necessary scaffolding complete all as specified and directed by Engineer-in-charge.

M&L for rendering on wall 20mm thick in CM 1:6 on brick work or concrete surfaces finished fair and even without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for rendering 20mm thick on other than fair face of brick work or concrete in two layer , 1st is 15mm thick READY MIX PLASTER and 2nd is 5mm thick READY MIX PLASTER mixed with water proofing powder at the rate of 2% of cement or as per manufacturers instructions and any height including necessary scaffolding complete all as specified and directed by Engineer-in-charge. Note:-Water proofing compound shall be measured sepratly under respective item.

Supply only integral water proofing compound confirming to IS 2645, complete all as specified and directed by Engineer-in-charge. Make:Pidilite / Tiki Tar Danosa / Dr Fixit / SCOT NO 1

M&L for PCC (1:4:8), C2 using 40 mm graded aggregate as in foundations, sub-base,filling and mass concrete complete all as specified and directed by Engineer-in-charge.

M&L for cement concrete type B1 1:2:4 using 20 mm graded stone aggregates as in plinth course, band coping of masonary wall including weathring slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed by Engineer-in-charge.

M&L for providing 50 mm thick cement concrete (1:2:4) type B1 using (20mm graded aggregate) as in hardstanding surfaces even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old plastered or unplastered surfaces by complete removal of existing treatmentn including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats oil bound distemper over a coat of alkaline resistent primer over 3mm thk wall care putty on the existing surface of wall etc complete all as specified and directed by Engineer-in-charge. Make of OBD: Asian paint Tractor Uno , Berger Commando , Berger Bison , Nerolac

M&L for preparation of new plastered or unplastered surfaces and applying two coat of oil bound distemper over a coat of 3mm thick wall care putty & priming plastered and other surfaces with alkali- resistant primer on wall etc complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old plastered or unplastered surfaces by complete removal of existing treatmentn including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats oil bound distemper over a coat of alkaline resistent primer over 3mm thk wall care putty on the existing surface of ceiling etc complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new plastered or unplastered surfaces and applying two coat of oil bound distemper over a coat of 3mm thick wall care putty & priming plastered and other surfaces with alkali- resistant primer on ceiling etc complete all as specified and directed by Engineer-in-charge.

M & L for preparation of new plastered/concrete surfaces of walls applying two coats of exterior acrylic emulsion (weather proof treatment) over one coat of primer, at any height including necessary scaffolding etc complete all as specified and as directed by the Engineer-in-Charge. NOTE : i) The tint and shade be as approved by the GE. ii) The treatment shall be carried out by the authorised applicator of the firm

M&L for new or previously untreated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer on wall/roof including necessary scaffoling complete all as specified and directed by Engineer-in-charge. Make:- Asian Ultima, Berger all weather anti dust or Nerolac excel total.

M&L preparation of old/new plastered surfaces by complete removal of existing treatment and applying two coats Plastic emulsion paint on wall & ceiling over a coat of alkaline resistent primer over and including a coat of putty to plumb the existing surface, complete all as specified and directed by Engineer-in-charge. Make:- Asian tractor, Berger bison,Nerolac little master.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-charge. MAKE : Asian ( Apcolite) or Nerolac ( Hi- gloss) or Berger (Luxol Hi- gloss)

Material & Labour Preparation of old painted on steel based surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint with smooth roller finish etc complete all as specified and directed by Engineer-in-charge. MAKE : Asian ( Apcolite) or Nerolac ( Hi- gloss) or Berger (Luxol Hi- gloss)

Material and labour for applying three coats of white wash on on walls including preparation of new or previously untreated surfaces complete all as specified and directed by Engineer-in-charge. Make : SURYA CEM , ASIAN PAINT , NEROLAC

M&L for preparation of existing mosaic cement tiles flooring and polishing with machine/hand to surface and pointing of joints to match the colour complete all as specified and directed by Engineer-in-charge.

M & L for DGVT coloured vitrified tiles of area exc 0.36 Sqm, 10mm thick, laid in flooring, with & including 5mm thick adhesive of Ferrouscrete (FERRO-1122) / Fevimate XL- Pidilite / Gold star of Bal Endura or equivalant including necessary roughning of existing PCC flooring & levelling the floor if required, grouting the joints with white cement complete all as specified and directed by Engineer-in-charge. Make:- Somany ,Orient Bell, kajaria.

M & L for DGVT coloured vitrified tiles of area exc 0.36 Sqm, 10mm thick, laid in skirting, over & including a backing coat of 10mm thick in CM 1:3, complete and making nosing at right angle corner, including levelling the wall, complete all as specified and directed by Engineer-in-charge. Make:- Somany ,Orient Bell, kajaria. NOTE : Skirting shall be flush with the walls.

M&L for coloured non-skid rectified ceramic tiles (joint free) of 7 to 8mm thick (square/rectangular ) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement match to existing including screed bed or beeding layer 20mm thick in cement mortar in 1:6 for laying of floor finish complete all as specified and directed by Engineer-in-charge. Make:- Somany ,Orient Bell, kajaria.

M&L for 300 X 450 X 7 to 8mm thick coloured glazed ceramic tiles as in vertical surface, set and jointed in neat cement slurry and pointed in white or colour cement match to existing surface ,over and including 10mm thick backing coat in CM 1:4, complete all as specified and directed by Engineer-in-charge.

M&L of 18-20mm thk Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed by Engineer-in-charge.

S&F of 5.5mm thick ordinary quality glass, frosted on one side, in square exc 0.5 Sqm each pane, fixed to aluminium beading in aluminium window/ventilation etc complete all as specified and directed by Engineer-in-charge. Make : Saint Gobain / Modigaurd / Atul

S&F of 12mm thick customized and Modular Toughened glass as in openable door ifixed with patch fittings. Fixing of glass should be top to bottom including required corner patch/Bottom patch fittings and any suitable fittings including glass edges cutting with diamond blade and M/C polish, including stainless steel grade 304 or 316,rate including for drilling hole for patch fitting and spider fitting as required and locking arragement with 900mm SS handle etc complete all as specified and directed by Engineer-in-charge. Make:- Toughened glass - Modiguard/saint-gobain/Atul SS patch fittings - ENOX/ZAHA/equivalent Note :- Floor spring will be measured saparately.

S&F of wash hand basin vitreous china white (flat back) of size 550x400mm with CI brackets, including brass chromium plated waste coupling 32mm with long screwed and fly nuts and pillar tap with long head, fancy type,15mm bore of pipe, with long head,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe, fixed in repairs complete all as specified and directed by Engineer-in-charge.

S&F of 32mm dia PVC (flexible) waste pipe for wash hand basin complete all as specified and directed by Engineer-in-charge.

S&F in repair 32mm dia brass chromium plated waste coupling for wash hand basins fixed complete all as specified and directed by Engineer-in-charge.

S&F of 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as specified and directed by Engineer-in-charge.

S&F of steel water tubing galvanised medium grade of 15mm bore size , with all fittings complete, fixed to wall, ducts, ceiling or laid in floor/wall complete all as specified and directed by Engineer-in-charge.

S&F of chromium plated brass angular stop valve suitable for 15mm bore G.I. tubing complete all as specified and directed by Engineer-in-charge.

S&F of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for G.I pipe of 15mm bore including necessary fitting etc complete all as specified and directed by Engineer-in-charge.

S&F of Kitchen sinks with drainage board made of stainless steel 1 mm thick (SS grade 304 AISI 18/8) IS embosed (IS : 13983) gloosy finish ktichen sink with plugs, washeres and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm, as in repairs complete all as specified and directed by Engineer-in-charge.

S&F in repair of 38mm dia brass chromium plated waste coupling for kitchen sink etc complete all as specified and directed by Engineer-in-charge.

S&F of 38mm dia PVC (flexible) waste pipe for Kitchen sink complete all as specified and directed by Engineer-in-charge.

S&F of powder coated aluminum frame for door ,windows,ventilators ,partisan etc.with one or more rebates including joining cleat for fixing etc.fixed type/louvered window or ventilator without sash bar,aluminum including necessary joining cleats,glazing clips,rubber packing,anodised aluminum snap beading,screws etc.compleate all as specified compleate all as specified.

S&F of aluminium powder coated Grill (DECO grill, DG 103 of7.5 mm thick of M/s ELESAR, M/S Royal Grill, M/S National Grill Associated Profiles & Aluminium Ltd.) fixed with suitable 'F'/H' section(No. 8584)15.30 x 23.40 x 1.40mm(minimum), fabricated and riveted to aluminium windows/ventilator complete all as specified and directed by Engineer-in-charge.

S&F of aluminium wire cloth anodised 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples to aluminium window etc complete all as specified and directed by Engineer-in-charge.

S&F of double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box ,main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-charge.

S&F of 150 mm aluminium alloy, anodised sliding door bolts, with hasp staple bolt type, fixing clips of sheet, cast or extruded section and fixing bolts complete all as specified and directed by Engineer-in-charge.

S&F of 100 mm long extruded aluminium alloy, handles, fabricated type, anodized, complete all as specified and directed by Engineer-in-charge.

S&F of Aluminium, anodized, barrel tower bolts of extruded section. Length of bolt is 100mm complete all as specified and directed by Engineer-in-charge.

S&F of 75mm long butt hinges medium weight stainless steel complete all as specified and directed by Engineer-in-charge.

M&L for Second class hard-wood timber scalting clean wrought timber framed and fixed complete all as specified and directed by Engineer-in-charge.

M&L of 12mm thick ply wood, grade BWR, type BB fixed with screws to timber frame work for inbuilt furniture etc complete all as specified and directed by Engineer-in-charge. Make : Century ply , greenply , Archid ply.

M&L for 0.9 mm thick decorative laminate type 1, of surface finish , colur and pattern as approved by GE,fixed with approved adhesive as per manufactures insrtuctions complete all as specified and directed by Engineer-in-charge Make : Century ply , greenply , Archid ply.

S&F and repair of MS framed work such as grills, gratings with ends of bars shouldered and or rivated or forged into spikes, framed guard bars barred iron doors ladders,framed balusters,walk ways railings frame work for water tank and similar work conforming to Fe.290, Gde-E-165 complete all as specified and directed by Engineer-in-charge

S&F of pre-painted galvalume aluminum zinc cotting ISI marked GI based corrugated steel sheet .50 mm thick of any colour having tensile strength of 550Mpa as in roof covering fixed with roof and corrugation side lap fixed with L or J type or cranked hook bolts and bitumen washer in roof with grade of sinc coating 275, including bent to a curve(of any radius) complete all as specified and directed by Engineer-in-charge

M&L for Hardcore of gauge not exc 63mm broken stone or boulders but not exc 100mm, deposited, spread and levelled in layers not exc 15 cm thick, watered and rolled/rammed to a true surface for levelling the surfaces complete all as specified and directed by Engineer-in-charge

M&L for guniting / Shotcreting concrete surface with an average thickness of 25 mm with cement mortar applied with compressor including supplying, fitting , fixing of wire mesh and guniting equipment after cleaning surface and spraying area with epoxy @ 1.0 kg per 1.50 sqm of surface area complete as per CI.2807 of specification of roads & bridge works published by IRC incl. cost of preparation of surface, supply of all materials and fuel, hire charges of machineries and labour etc. complete all as specified and directed by Engineer-in-charge.

M&L for Wire netting of galvanised steel wire 1.40mm dia 20mm size of mesh fixed with tinned tacks of wire staples complete all as specified and directed by Engineer-in-charge.

M&L for provision of steel reinforcement with TMT bars of appropriate size where 20% of cross section is reduced including dismantling of rusted steel including application of rust converter FEOVERT and applying protective coating IPNET-RB complete all as specified and directed by Engineer-in-charge.

M&L for chipping, removing carefully concrete work by low impact hammer, breaker without damaging the structure & cleaning and disposal of debris out side the premises etc complete all as specified and directed by Engineer-in-charge. NOTE : Hard concrete shall not be removed by force.

M&L for clean existing reinforement with/ rotary wire bruch, making the surfaces free from loose material dirt etc, complete, applying two coats of alkaline rust converting primer FEOVERT confirming to ASTM-B-117, on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 6 hour between the coats and applying protective coating IPNET-RB complete all as specified and directed by Engineer-in-charge.

M&L for carryout application of bi-polar migratory corrosion inhibitor EPCO-KP-100/Protectsil/ CIT/Ferogard 903 on concrete surface (This inhibitor shall have migratory kind of properly which permits the material to a vertual extent of 100mm, through pores of concrete, inhibiting the corrosion and de-passivating the Electro-chemical reaction. It should have properly to attack anode as well as cathode, which is purely alkaline in nature (pH-9.5), so it has no carcinogen activity with concrete complete all as specified and directed by Engineer-in-charge.

M&L for drilling and fixing Rohibb Teflon nozzoles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes in structural members at the intervals of 500 center to center in staggered manner or as directed by Engr-in-Charge in RCC structural element work shall be carried out as under :- (i) Cleaning of holes. Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles. Insert 12mm dia, Rohibb Teflon nozzles in cleared holes. External end of nozzles to be machine to receive outlet of grouting gun. Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for minimum 12 hours. (iii) Cutting the nozzles. Cut the nozzles by chiselling after completion of grouting without damaging structural elements.

M&L for injecting of site cement slurry grout, in ratio 1:2 (1 Cement, 2 water) including super plasticizer (Supercom-100) 250 ml/50 Kgs. Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/ specified grout by means of pump at a pressure of 0.5 Kg/CM2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled. (For repair to slab).

M&L for injecting low viscosity MONOPOL (3-5cps) high molecular weight monometer by pressure and using mechanized injector gun with accessories till nozzles rufeses to accept the grout, including , mixing of materials, mixing of material components (Part a&b) in the required quantities as per manufacturer's instruction by weigh batching. Grouting maintain the pressure at exit (0.5 to 1.0 Kg/ Cm2) by monitoring pressure guage at exit. Grout the material through prefixed nozzles in the structural elements @ 100ml per nozzles. (Beam & columns) complete all as specified and directed by Engineer-in-charge.

M&L for providing and applying structural grade EPIBOND-21-LP prior to application of any type mortar plaster confirming to ASTM-C-882-91 (Arizona slant shear test) to ensure bond between old concrete and new concrete) complete all as specified and directed by Engineer-in-charge.

M&L for providing and applying jacketing around columns beam slabs with micro concrete (Molith MC) M40 including all lifts, shuttering, drilling, holes and fixing shear anchor as per specification complete all as specified and directed by Engineer-in-charge. Note :- i) Reinforcement shall be measured and paid saperately ii) Rates shall include jacketing, formwork and micro concrete

M&L for Building up the profile of structural members by using latex additives(MONOBOND) modified air cured mortar system (Polymer modified mortar) (1:5:15 = 1 monobond-5Cement-15 sand) -in damaged areas in 30mm thickness including leveling profliling etc complete all as specified and directed by Engineer-in-charge.

M&L of Point wiring with 1.5 sqmm 1100 volt PVC insulated & unsheathed multistranded copper conductor in & including PVC conduits of suitable size complete one run of 1.5 sqmm PVC insulated unsheathed stranded copper for earth continuity wire terminated in terminal box with modular box controlled by one switch including making good surfaces complete all as specified and directed by Engineer-in-charge Make of cable- Polycab/Havells/Finolex Make of conduit- Supreme/Precision/Pressfit

(a) All as per item No 75.00 here - in - before but One light point controlled by one switch SP one way.

(b) All as per item No 75.00 here - in - before but One ceiling fan / exhaust fan point controlled with one 5A switch

(c) All as per item No 75.00 here - in - before but One 3 pin socket outlet 5 Amps independent board

(d) All as per above item No. 75.00 here-in-before but with 4sqmm cable 1100volts grade multistranded PVC insulated and 4.0 sqmm for earth continuity wire for 15Amps socket outlet from the main switch.

S&F Modular Switch , 6Amp, One way, 1 module. ISI marked complete all as specified and directed by Engineer-in-charge Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

S&F modular switch 1way 16A 1Module 230 Volts complete all as specified and directed by Engineer-in-charge Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

S&F modular sockets 6A, 2/3 pin combined 2 module complete all as specified and directed by Engineer-in-charge Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

S&F Modular Socket 16A-2/3 pin combined 2 Module complete all as specified and directed by Engineer-in-charge Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

S&F Modular type, electronic fan regulator ( 5 step ), 450 Watts, 230 volts, 2 module complete all as specified and directed by Engineer-in-charge Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

S&F ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified and directed by Engineer-in-charge. Make : Legrand , Havells , Goldmedal

S&F Modular white cover plate with Frame 3 Module complete all as specified and directed by Engineer-in-charge Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

S&F Modular white cover plate with Frame 6 Module complete all as specified and directed by Engineer-in-charge Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

S&F Modular white cover plate with Frame 12 Module complete all as specified and directed by Engineer-in-charge Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

S&F Modular metal flush box 3 module complete all as specified and directed by Engineer-in-charge Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

S&F Modular metal flush box 6 module complete all as specified and directed by Engineer-in-charge Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

S&F Modular metal flush box 12 module complete all as specified and directed by Engineer-in-charge Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

S&F in repair baton integral sleek extruded polycarbonate LED channel with white acrylic cover and aluminium base of 1x18WH with accessories internally prewired and incl connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-charge. Make- Jaquar / Philips / Havells.

Supply and fix 4 x 4.0 sqmm single core cable for phases & neutral FRLS 1100 volts grade cable with stranded copper conductor in and including PVC conduit of suitable size including 2 single core cable with stranded copper conductor of size 2 x 2.5 sqmm (green colour) for earthing complete all as specified and directed by Engineer-in-charge Make of cable- Polycab/Havells/Finolex Make of conduit- Supreme/Precision/Pressfit NOTE : 4 runs of 4 Sqmm cable, 1 run of PVC conduit and 2 run of 2.5 Sqmm cable shall be measured as 1 Run.

Supply & fix in repair MCB DB, TPN 08 way vertical type, 415 V with 200 Amps rated bus bar and double door connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as specified and directed by Engineer-in-charge, comprising of the following : - (a) MCCB 3 Pole, 415 V fixed type, 160 Amps with breaking capacity 25 KA-01 Nos (incoming) MAKE: Legrand, Schneider, GE (b) MCB TP 63 Amps, 10KA - 05 Nos (C Series) (Outgoing) MAKE: Legrand, Schneider, GE (c) MCB SP 40 Amps, 10KA - 09 Nos (C Series) (Outgoing) MAKE: Legrand, Schneider, GE

S&F of Ceiling Fan of size 1200mm Sweep, ISI marked, BEE 5 Star rating and alongwith down rod fixed to ceiling and connecting up including provision of flexible 3 core copper cable & testing, smooth functioning at site complete all as specified and directed by the Engineer-in-Charge. Make-Orient/Crompton/Havells

S&F of Exhaust fan 230mm sweep, 1400 RPM metallic body with louvers AC supply, single phase, 230 volts, 50Hz, complete fixing arrangements on the wall with nuts and bolts and making the good surfaces complete all as specified and directed by Engineer-in-charge at site. Make-Orient/Crompton/Havells

Material and labour for fabrication of kitchen (Exhaust) duct for 22 SWG sheet including all accessories complete all as specified and directed by Engineer-in-charge

Material and labour for Air Damper for 18 SWG sheet including all accessories complete all as specified and directed by Engineer-in-charge Make of Stainless steel - Jindal/Tata/JSW

Supply & installation of SS 304 Kitchen Hood V shape with both side oil filter matt finish 18Gez & fresh Air, with damper & oil filter with oil drain complete all as specified and directed by Engineer-in-charge Hood Size - 156"x30"x20"x5" . Make of Stainless steel - Jindal/Tata/JSW

Supply & installation of cabinet type fan of 3HP motor, 1440 RPM, V belt drive double skin panel puf insulated 25mm thick outer precoated inner plain fram work aluminium extruder section of capacity 6000 CFM, 40 mm wg for Fresh Air & Exhaust Air, complete all as specified and directed by Engineer-in-charge. Make of Motor- Kirloskar/ Crompton Greaves/SIEMENS/ABB. Make of Stainless steel - Jindal/Tata/JSW

Supply and fixing, laying PVC insulated XLPE, armoured LT cable, 1100 Volts grade with aluminium conductor of size 4 core 10 Sqmm laid in trenches/ through pipe/ ducts or fixed on wall etc ,complete with saddles and clamps complete all as specified and directed by Engineer-in-charge Make: Polycab / Havells/ Asian (RPG)

Supply and fix MCCB 3 Pole, 415 V, fixed type, 25 to 100 Amps with breaking capacity 16 KA complete all as specified and directed by Engineer-in-charge Make- Legrand/Havells/Schneider

Supply and fix Star delta starter fully automatic suitable for 415V AC for 3.0 HP Motor complete all as specified and directed by Engineer-in-charge Make-L&T / Seimens

jkconstruction