8203 PROVN OF 04 INTO MEAT CUTTING ROOM FOR MESSES AT ASI AND PROVN OF STORE NEAR BLDG NO T 1 UNDER GE CENTRAL PUNE

Amount

Surface dressing n exc 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, trenches and under floor including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft / loose soil complete all as specifed and directed.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for hard core using broken stone or boulders of gauge n.exc 63mm, deposited spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface under floor, plinth protection etc complete all as specified and directed.

M& L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for damp proof course 40mm thk to horizontal or vertical surfaces in cement concrete 1:2:4 type B-0 mixed with liquid WPC as per manufacturer’s instructions including necessary formwork complete all as specified and directed. Note:- WPC shall be measured and paid separately.

M&L for 150 micron thick polythelene film spread through out the floor over hard core to arrest capillary action of ground moisture complete all as specified and directed.

M&L for plain Cement concrete 1:4:8 type D2 using 40mm graded aggregates as in foundations, filling and mass-concrete complete all as specified and directed.

M&L for Reinforced cement concrete (design mix) M-25 (using 20mm graded aggregate) in foundations, including rafts, footings, plinth beams, bases for columns, etc complete all as specified and directed.

All as per item No 10 here-in-before but in columns, pillars, piers, posts and struts etc complete

All as per item No 10 here-in-before but in chajjas complete

All as per item No 10 here-in-before but in roof beams and lintels complete

M&L for providing cement concrete 1:2:4 type B1 using 20mm graded aggregates as in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands and the like including weathering, slightly rounded for chamfered angles and throating, all as specified and directed.

M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6 complete all as specified and directed.

Use and waste of formwork to sides of Rough finished surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

All as per item No 16 here-in-before but to sides of pillars, posts, struts, piers, columns and stanchions

All as per item No 16 here-in-before but to sides and soffits of roof beam, lintels etc. including supports,overhangs and also splays between floors and beams

All as per item No 16 here-in-before but to Chajja and similar items including edges.

All as per item No 16 here-in-before but to rough finished flat surfaces of edges of window cills, concrete railings, and similar work n.exc 20 cm wide complete

S&F 40 mm thick Flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on both sides fitted to chowkats complete all as specified and directed.

S&F 30mm thick glazed and skeleton shutters of 2nd class hardwood, open rebated and prepared to receive gauze etc (without sashbars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads complete all as specified in clause No 8.24(a) of Section 8 SSR part-I.

S&F butt hinges 100mm size mild steel cold rolled medium weight all as specified and directed.

S & F Mild steel barrel tower bolts, 200 mm long stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S & F Mild steel pressed handles,150 mm long oval type, stove enamelled black complete all as specified and directed.

S & F Mild steel sliding door bolts 300 mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

M & L for pressed steel frame for doors of size 125 mm x 60 mm with 1.2 mm thick PBI sheet with PCC 1:3:6 filling in inner core of frame with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L for TMT bar 8mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete all as specified and directed.

All as per item No 28 here-in-before but as in stirrups spacers and bindrs complete.

M & L for mild steel work in tubular trusses including special shape washer etc complete using ERW or induction butt welded tube confirm to IS 1161-1998 grade st-240 all as specified and directed.

M&L for mild steel rolled section as in joist, channel, angle, rafter, purlins or tee sections, fixed independently, without connecting plates etc (cut to ordinary lengths i.e within 20 mm of the length indicated) complete all as specified and directed.

M & L for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc.

M & L mild steel holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. complete all as specified and directed.

M&L for mild steel plates plain square cut or notched (ordinary and counter sunk) forming holes without any attachment conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and directed.

S&F mild steel screw bolts (machine made) hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washere and one hexagonal or square nut and not exc 5cm long and dia meter of shank 16 to 20 mm complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars all as specified and directed.

All as per item No 36 here-in-before but without glazing bars complete.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F steel rolling shutters of 1.0 mm thick lath, without ball bearing including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated push pull or manual type complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall etc fixed with shelf tapping screws complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any) colour having tensile strength of 550 Mpa as in roof covering / cladding to wall etc fixed with shelf tapping screws complete all as specified and directed.

M& L for 75 mm thick PCC flooring 1:4:8 Type D-2 (using 40mm graded crushed stone aggregate ) as in subbase of floor complete all specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in floor topping, finished surface even and smooth with using extra cement and laid in alternate bays using glass dividing strips complete all as specified and directed. Note : Supply only glass dividing strips shall be measured and paid under seperate item here-in-after.

Supply only glass dividing strips 3mm thick 38mm wide complete all specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C2 ( using 40 mm graded stone aggregate) as in plinth protection/ path etc finished even and smooth without using extra cement complete all as specified and directed.

M & L for 300 x 200 x 6 to 7 mm thick, coloured glazed ceramic tiles as in skirting/dado laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including triangular filleting on top and 15 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-25mm thick over and including 15mm thick cement screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete all as specified and directed.

M&L for granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing complete over and incl 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 over brick / conc wall surfaces trowelled to even & smooth w/o using extra cement for internal wall complete all as specified and directed.

All as per item No 49 here-in-before but in CM 1:4 in two layers, 5mm thick in CM (1:4) mixed with liquid water proofing compound as per manufacturers instruction on external surfaces over a coat of 10mm thick in CM (1:4) surface finished with sponge finish complete all as specified and directed. Note:- Liquid WPC shall be measured and paid separately.

Supply only liquid water proofing compound

M&L for preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of 2 mm thick wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint of approved shade on wall all as specified & directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of primer complete all as spd and directed

M&L preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer complete all as specified and directed.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty or MS clips fixed to steel window complete all as specified and directed.

S&F 15 mm bore bib taps, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed.

M & L for Point wiring using colour coding as per IS with 1.5 Sq mm multistranded copper conductor single core FRLS PVC insulated sheathed 1100 Volts, ISI-694 marked drawn through and including Casing & Capping on wall /roof/ floor along with suitable fittings, with MS sunken boxes of 1.6 mm thick of suitable size including making good disturbed surfaces to match with existing finishes including 3mm thick laminated sheet ISI marked for housing switches sockets etc along with1.5 Sq mm copper conductor FRLS, PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified for the following :

(a) One light point controlled by one, one way switch

(b) One three pin 5 Amps socket outlet point controlled by one No one way switch on same board

All as per Item No 59 above but with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

M&L point wiring complete with and including single core FRLS PVC insulated un- sheathed flexible bright annealed multi stranded copper conductor cables 1.5 sqmm (22/0.30mm ) 1100Volts grade drawn through and including heavy duty PVC rigid conduits of suitable size totally concealed in walls /floors etc. all conduit accessories/fittings/junction boxes/ inspection covers etc. of heavy grade, ISI marked and modular type sunken boxes factory made complete with modular cover and frame including 1.5 sqmm 1100 V grade FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cable as continuous earth wire connected to metallic bodies of luminaires/fans etc. at one end to common earth dolly at other end, complete all as specified. Note- (i) Cutting in chases in walls and making good of distrubed surfaces matching with existing finishes shall be done by contractor without any extra cost.

a) One light/fan point controlled by one, One-way switch complete all as specified

b) One 5 pin 5Amp Socket outlet point on same board complete all as specified.

All as per Item No.61 above but with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent board, including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

S & F for Switch piano, flush type single pole, one way 5 Amp all as specified.

S & F for Switch piano, flush type single pole, one way 15 Amp complete all as specified.

S & F for Socket outlet 2 in 1, 3 pin, 5A complete all as specified.

S & F for Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified.

S & F modular switch 6A SP one - way 230V white ivory finish complete all as specified

S & F modular switch 16A SP one - way 230V white ivory finish complete all as specified

S & F modular socket outlet 2/3 pin 6 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified.

S & F modular socket outlet 2/3 pin 16 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified.

S&F ceiling rose surface type three terminals complete all as specified and directed.

Supply and fix LED Tube light fittings wall mounted, 18 W LED 6500K with Opal white Poly Carbonate diffuser provided with high efficient integral constant current LED Driver 230 V etc. complete with mounting batten including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector Conforming to Cat Part No. BLRB DB 118 & BLRB18 W CW LED Make :- Bajaj or Equivalant model from the specified make given in the PS.

S&F LED security light in replacement of luminaries 30 watt complete with all accessories and wall mounting bracket of suitable size including clamps, nut bolts etc. prewired Conforming to Bajaj Cat Part No. BCLST 30W LED I or equivalent model from the specified make given in PS

S & F exhaust fan of sweep 300mm with louver heavy duty single phase suitable for 230 volts 50 HZ,1400 rpm and connecting up complete including provision of 3 core flexible cord from ceiling rose to connector of fan with cable of suitable size complete all as specified and directed.

S & F for MCB DB, SPN, sheet metal enclosure, 8 way with 200 amps rated bus bar double door, fixed on wall including good to disturbed surfaces complete all as specified and directed.

All as per item No 75 here-in-before but 2 way, Single door, 240 V, SPN complete.

S & F for MCB double pole of rated capacity 32 amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified and as directed.

All as per item No 77 here-in-before but rated capacity 6 to 32 amps.

M & L for Reinforced concrete pipes of dia 100 mm 2 nos half round complete (for bottom and top) over levelled earth complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core , from DB/Panel to sub DB/ main board complete all as specified and as directed.

M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm in and including PVC conduit incl all accessories complete all as specified and directed (Note:- (i) Making good of disturbed surfaces will be done by contractor without any extra cost. (ii) 3 runs of 4 Sqmm conductor and one run of PVC conduit shall be measured as one unit length.)

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to a depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia medium grade and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete all as specified and directed.

M/s RAJKUMAR MANIKRAO PATIL

Suma Construction

L.T Associate

M/s.BAJRANG CONSTRUCTION

ANIL CONSTRUCTION CO.