RESURFACING OF ROAD ROAD MARKING REPLACEMENT TO ROAD FURNITURE AND ALLIED WORKS AT AIR FORCE STATION PANAGARH UNDER GE AF PANAGARH

Amount

Material & Labour for repairs to pot holes of any depth exc 30mm and n.exc. 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc., cutting around edges to at least 25mm in depth and making good by applying tack coat with bituminous primer at 5kg per 10 sqm using paving bitumen VG-10 grade, putting in premix bituminous macadam, well rammed and sealed with binder using paving bitumen VG-30 grade @ 9.8 kg per 10 sqm blended with 0.09 cum of stone chippings 6.3mm size and again well rammed (including supply of pre-mixed macadam, binder and chippings) complete all as specified and directed by Engineer-in-Charge.

Milling of existing wearing course mechanically by using milling machine and disposal of retrieved materials at any location as decided by Engineer-in-Charge within MOD land complete all as directed.

Material & Labour for preparation of old bituminous/ black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for applying evenly a priming / tack coat with bituminous primer @ 5 kg per 10 sqm with paving bitumen (grade VG 10) complete all as specified and directed by Engineer-in-Charge.

Material & Labour for premix bituminous macadam laid /rolled and compected to required gradient and camber (consolidated thickness 75mm or less) using paving bitumen VG 30 grade as binder minimum 4% by weight of total mix, complete all as specified and as directed by Engineer-in-Charge. Note :- (i). The contractor shall submit design mix for approval. The quoted rate shall be inclusive of the same. The design mix shall be approved by GE. (ii)If the requirment of bitumen as per design mix is more than 4% the same shall be provided by the contractor at no extra cost to the Govt.

M&L for bituminious premix semi-dense asphaltic concrete 40mm (consolidated thickness) using paving bitumen of grade VG-30 with 5.5% binder content by weight of total mix, mixed in Computerised Hot Mix Plant and spread by means of Self Propelled Mechanical Paver, rolled and compacted to required camber and gradient by using mechanical power road roller of 8 to 10 tonne capacity as specified and as directed. (Notes: (i). The contractor shall submit design mix for approval. The quoted rate shall be inclusive of the same. The design mix shall be approved by GE. (ii) Exact quantity of binder to be used shall be ascertained by Design Mix as specified. (iii) Minimum 5.5 % of binder shall be used. However, in case more than 5.5% binder content is required as per design mix, the same shall be provided by the contractor at no extra cost).

Material & labour for preparation bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes arrows etc and the like n.exc 10cm wide on road/ pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufactures instruction complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of previously treated surfaces of brick, stone, plaster or concrete and applying a coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc all as specified and directed including taking down old solar cat eye of any specification. Make:- Dark Eye/3M/TATA/BP/Road Star/Oskar as approved by GE.

Supply and fixing retro reflective raised pavement markers (cat eye) double sided lens reflector of ABS body of size 100mm x 100mm x 18.5mm with reflector fixed with and including MS stud of suitable size as per manufacturer instructions complete all as specified and as directed including taking down old solar cat eye of any specification. Make:- Dark Eye/3M/Greenlite/Automate as approved by GE.

Supply and fixing retro reflective sticker with letter or figure on ACP sheet (Block, Roman, Italic or Indian) not exc 30 cm in silver white with blue colour back ground and with high intensive grade, pasted or substrate by pressure senstive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the existing plate of structural frame work by means of suitable sized aluminium alloys, revets or bolts & nuts @ 300mm centre to centre all along the periphery as well as in two vertical rows alongwith theft resistant measures, as specified as directed by Engineer-in-Charge.

Material and labour for stainless steel hollow sections or steel plate of any thickness incl cutting to shape/size required and connecting together by means of welding /rivetting and embedding in concrete complete all as specified and directed by Engineer-in-Charge. Note:- Excavation & PCC will be measured & paid separately under respective items.

Excavation in post holes (or similar holes) each n.exc 0.5cum getting out, returning, filling in and remaining earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as specified and as directed.

Material and labour PCC 1:2:4, type B2 with using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed by Engineer-in-Charge

Material and labour for metal tubular dealineator made out of ABS round body fitted with 02 Nos 50/65mm highly reflective reflactors made out of PMMA and mounted on 45/50mmdia mild steel pipe of 600mm height duly power coated and thermo plastic elastomer 3 bands of green, red & yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including necessary excavation and embredding in plain cement concrete 1:2:4 type B1 of size 150 x 150 x 300mm complete all as specified and directed by Engineer-in-Charge including taking down old delineator of any specification.

Material and labour for providing pre cast cement concrete 1:2:4, type B1 as in road side curb stones (machine made) of any section with fair faces, including chamfers, weathering, throuting etc and set in cement mortar 1:6 including demolition of old concrete of any specification complete all as specified and directed by Engineer-in-Charge

Schedule of Credit

BABY ENGINEERING ELECTRICAL MECHANICAL STORES (BID ID -3145057)

Hooghly Construction Co. (BID ID -3145021)