DAY TO DAY MAINT AND CERTAIN REPAIRS TO JOINERY, PLUMBING PLASTERING AND OTHER B/R REPAIRS TO OTM/ MD ACCN UNDER AOR OF AGE B/R-I OF GE (E) FEROZEPUR CANTT

Amount

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etccomplete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in c:m 1:6 complete all as specified and directed.

All as per srl item No 02 here-in-before but using old bricks retrieved from dismantling under ser item no 01 here-in-before including cleaning and removal of mortar from old bricks etc complete all as specified and directed.

Taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 10 mm thick cement plaster on ceiling surfaces in cement mortar 1:4 finished fair and even without using extra cement complete all as specified and directed.

Supply only integral water proofing compound conforming IS 2645-1975 complete all as specified and directed.

M&L for Preparation of new plastered surfaces of ceiling & applying two coats of white wash complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls etc., and applying three coats of white wash complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and removing from site to store or otherwise as directed complete all as specified and directed.

All as per srl item No 11 here-in-before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and directed.

Taking down shutters of any description,exc.1.0 sqm and not exc.2 sq. m each and after repair refixing in same opening complete all as specified and directed.

Resecuring, or easing & adjusting without taking down shutters of any description, exc.1.0 sqm and not exc.2 sq. m each complete all as specified and directed.

Taking down shutters only of any description exc 1 sqm and not exc 2 sqm each including removing from site to store or otherwise as directed complete all as specified and directed.

M&L for Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 125mm x 60 mm including one shop coat of red oxide primer complete all as specified and directed.

M&L for Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 105mm x 60 mm including one shop coat of red oxide primer complete all as specified and directed.

S&F of 40mm thick flush door shutter of solid core construction with particle board core and plywood face panels, commercial type on both sides one face is covered with decorative face veneer with lipping /frame to match complete all as specified and as directed.

S&F 35mm thick, 2nd class hard wood (Hollock), plain framed, paneled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-8 complete all as specified and directed.

S&F 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified.

S&F Factory made box type steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F Factory made box type steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F Factory made box type steel ventilator with with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drg No CE JZ/TD-06/07 & CEJZ/TD-07/07

M&L for Mild steel framed work of E-165 (Fe 290) as in grills/guard bars shouldered with steel window/ ventilator frames including red oxide primer coat complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC "C"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles & rails with suitable PVC sheet beading and jointed togeather with solvent cement complete all as specified and directed.

Dismantling of boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F 18mm thick Prelaminated particle board,flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade, prelaminated both side with decorative choice lamination, fixed with screws as in shutters & shelvesincluding 6mm thick teak wood leaping on three sides and 20mm thick on hanging side complete all as specified and directed.

Dismantling timber scantling unframed work as in fillets, rails, posts, rafters, purlins,etc under 40 Sq.cm in section complete all as specified and directed.

M&L in repair for Plain fillets of 2nd class hard wood, square or rectangular or triangular in section, clean sawn, secured with nails and brads area n exc 3 Sq cm complete all as specified and directed.

S&F PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT door handle, 150 mm long and fixed with steel screws complete all as specified and directed.

S&F 300mm long alluminium alloy anodised, sliding door bolt with hasp,staple (bolt type) and fix clips of sheet,cast of extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all complete all as specified and directed.

S&F Continous (piano) hinges of mild steel bright finish or electro galvanised with flap (when open) 30mm,fixed with steel screw complete all as specified and directed.

S&F aluminium anodised handles 150 mm long fixed to doors complete all as specified and directed.

S&F aluminium anodised tower bolts 100 mm long fixed to windows complete all as specified and directed.

S&F in repair 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixedcomplete all as specified and directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and directed.

S&F in repair mild steel door handles, stove enameled black,medium wt 125 mm long and fixed with steel screws complete all as specified and directed.

S&F in repair mild steel barrel tower bolts, stove enameled black, with bright bolt, medium weight 150 mm long and fixed with steel screws complete all as specified and directed.

S&F 300 mm mild steel ordinary rat tail spring including roller and roller plate complete all as specified and directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring as fixed in repairs complete all as specified and as directed.

S&F in repair butt hinges, 100mm long of mild steel, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples fixed in repairs complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified and directed.

Taking down aluminium door/windows shutters only (area exc 0.5 sqm but not exc 1.5 sqm each) and dismantling all members and reassembling the same with and including new screws, new rubber gasket & new aluminium cleats of existing make and also refixing the locks & rollers in existing position with and including new screws including refixing the window shutters in same opening complete all as specified and directed.

Hacking out old broken glass (any thickness,size quality or description ) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed.

All as per Ser item No 51 herein above but exc 0.5 Sqm in each pane complete all as specified and directed.

S&F anodised aluminium window , ventilator etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding aluminium frame of Jindal /Hindalco (or) Equivalent make of approved size, including necessary joining cleats, glazing clips,powder coated aluminium snap beading, screws, including necessary anodised aluminium fittings like handles etc complete all as fixed in reapairs all as specified as per manufacturers instructions complete all as specified and directed. Note: EPDM Rubber beading/gasket measured and paid seperatley.

S&F EPDM Rubber beading around glass in aluminium windows /ventilator shutters complete all as specified and directed.

Supply and fixed in repair hydraulic door closer of aluminium die cast body,designation No-3 universal type suitable for door shutter of 851 mm to 1000 mm weight between 61 Kg to 80 kg, etc complete all as specified and directed.

Supply and fixed in repair Brass mortice lock 75 mm, 2 levers, vertical type complete all as specified and directed.

M&L for Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in fillings and mass concrete, filling backs of chowkats etc. complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in floor topping, 40mm thick, surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L for 50mm thick Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection, surfaces finished even and fair without using extra cement including provision of construction joints complete all as specified and directed.

M&L 25 mm thick cement concrete (1:2:4) type B-1 using (20 mm graded crushed stone aggregate) as in sub base of flooring,surface finished rough to receive floor topping complete all as specified and directed.

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed.

All as per item No 62 here-in-before but 20 mm bore tubing complete all as specified and directed.

M&L for GI steel water tubing, 15mm bore medium grade galvanized with all fittings and fixed to walls and celling or laid in floor, complete all as specified and directed.

All as per item No 64 here-in-before but 20 mm bore tubing complete all as specified and directed.

Fixing only,after cleaning old steel water tubing,15 mm bore and connections in new or old position using new fittings complete all as specified and directed.( Note: Serviceable pipes obtained from item 62 shall be reused).

All as per item No 66 here-in-before but 20 mm bore ( Note: Serviceable pipes obtained from item 63 shall be reused).

S&F in repair bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair stop valves, fancy type, CP with long shank and cup ( concealed type ), screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed.

S&F in repair piller taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed complete all as specified and directed.

S&F brass CP Angle cock with long shank/flange and cup (concealed type) 15 mm dia bore screwed down with crutch handle both end screwed for iron pipe or union as fixed in repairs complete all as specified and directed.

S&F in repair gunmetal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F in repair gunmetal gate valve of 15mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F in repair central hole basin mixer for wash hand basin including all fittings ie including connection pipe as per manufaturers specification complete all as specified and directed. (Make: Parko/ESSCO/Prayag ).

S&F Wall mixture 3 in-1 with provision of overhead shower complete with 115 mm long bend pipe on upper side,connecting legs and wall flange complete all as per manufacturer's instruction and as directed. (Make Parko/ESSCO/Prayag )

S&F 15mm dia CP Sink cock swan neck regualar spout with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule complete all as specified and directed (Make: Prayag Cat No 9214 or equivalent cat part in make specified in particular specification.)

S&F in repairs 15 mm bore Bib taps Brass cast copper alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 15mm bore stop cock cost copper alloy with crutch or butterfly handle screwed down, high pressure with crutch or butterfly handle screwed with ends for iron pipe or for unions complete complete all as specified and directed.

S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe minimum wt 90 gms complete all as specified and directed.

S&F in repair 15mm bore piller tap of PTMT any colour high pressure screwed for iron pipe minimum wt 110 gms complete all as specified and directed.

S&F in repair 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe minimum wt 90 gms complete all as specified and directed.

S&F in repair 20mm bore stop valve of PTMT any colour high pressure screwed, for iron pipe minimum wt 92 gmscomplete all as specified and directed.

S&F in repair 15mm bore angle stop valve of PTMT any colour high pressure screwed, for iron pipe minimum wt 90 gms complete all as specified and directed.

S&F in repair Swivel shower of PTMT any colour for fixing with 15 mm pipe with shower arm 15mm size, 195 mm long with bend of 45 degree with PTMT flange complete all as specified and directed.

M&L for taking down existing Bib tap and pillar taps/sink mixture/wash hand basin mixture of any type for replacing washer/ brass spindle etc. and refixing the samecomplete all as specified and directed.

M&L for taking down existing stop valve/angle cock 15 mm bore by replacing washer/spindle etc.And refixing the same complete all as specified and directed.

S&F PVC waste pipe 32 mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks / WHBs complete all as specified and directed.

S&F Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450 mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and directed.

S&F in repair PVC hinges device for Vitreous China wash down water closet pan (pedestal pattern/Anglo Indian or universal pattern) including fixing bolts complete all as specified and directed

S&F in repair 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F 500 ltr capacity rotational moulded polyethylene water storage tanks Triple layer (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank all as specified in SSR Part-I complete all as specified and directed.

S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks Triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S/F ball brass valves high presser with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed to union etc of size 20mm dia and as fixed in repairs complete all as specified and directed.

S&F Vitreous china wash down water closet pan ( pedestal pattern ), white/ coloured including seat & cover, flush pipe, connection to drain and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed.

S&F Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed.

S&F PVC 10 ltr. Cap. valveless syphonic action type, flushing cictern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc. complete all as specified and directed.

S&F Vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified and directed.

S&F in repair Brass chromium plated bottle traps 32mm dia for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union , cap and fixing in repair complete all as specified and directed.

S&F PTMT grating doom 100mm dia with or without waste hole fixed in repairs complete all as specified and directed.

S&F 32mm dia waste coupling of PTMT fittings full or half threaded(minimum wt 32mm-45 gms for steel sinks/wash hand basin etc., complete all as directed as fixed in repairs complete all as specified and directed.

S&F Seat Cover(Whitecolour) for pedestal pattern as fixed in repairs complete all as specified and directed.

S&F in repair Corner glass shelves 300 mm radious,8mm thick as per sample radious for bath room, fixed on suitable support of brass chromium plated clips complete all as specified and directed.

S&F in repair 125 mm chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed.

S&F Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed to walls with steel screws and wooden/rawl plugs as in repairs complete all as specified and directed.

S&F in repair Stainless steel soap dish (not less than 1mm thick) of type as directed,fixed to walls with chromium plated brass screws with wooden/rawl plugs, complete all as specified and directed.

S&F in repairs Toilet paper holder, cast type aluminium anodized, fixed to walls with wooden/rawl plugs and steel screws complete all as specified and directed.

Supply & fixed replacement of pressure JET for EWC including PVC connection and CP fitting as fixed in repairs and complete all as specified and directed.

S& F in repair Syphon Kit for dual/single type PVC flushing cistern for 10 ltr capacity incl washer, flushing handles etc as fixed in repairs complete all as specified and directed.

Taking down eaves gutters and rain water pipes( any size or pattern),including all fittings heads shoes bends swan-necks etc complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed to walls or laid in trenches complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm dia Junction single (Single or double T) equal or unequal complete all as specified and directed.

S&F 110mm dia Junction single (Single or double T) equal or unequal complete all as specified and directed.

M&L PVC (SWR) floor trap 75 mm, plain with PVC grating including jointing with solvent cement etc., complete all as specified and directed.

S&F 1mm thick stainless steel sink with dranage board, plugs, washers, PVC waste pipe, union, CP cuppling & cantilever brackets embedded in cement and sand mortar in wall, overall size 915mmx460mm bowl size 410mmx330mmx160mm as in repair complete all as specified and directed.

Dismantling floor hearth or wall/stone tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including screed bed15mm thick in cm(1:6),complete all as specified and directed.

M & L Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality on vertical surfaces such as in skirting /dado etc area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 10 mm thick rendering in cement mortar (1:4), complete all as specified.

M & L Non skid ceramic coloured tiles 7-8 mm th (square or rectangular)area of eacch tile exc 0.06 SM but not exc 0.11 SM in floors etc.. Set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for glazed ceramic coloured tiles in vertical surfaces 300 X 200X 7 mm thick on vertical surface such as skirting/ dado set and jonnted in cement slurry and pointed in white or colour cement to match over and including 10mm thick back coat in CM 1:4 complete all as specified and directed.

M & L for Light shade Vitrified ceramic tile 10 mm thick (square or rectangular) polishedarea of each tile not exc 0.36 SM in floors etc, set and jointed in neat cement slurry and pointed in white cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for running welding in repairs for thickness of metal to be welded n exc 6mm complete all as specified and directed.

S&F Mild steel curtain rod powder coated with fixing side brackets,end cups,rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified.

M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide primer complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

JAWAHAR CONSTRUCTION COMPANY

DHAWAN CONSTRUCTION COMPANY

Supreme Constructions

CHETAK CONSTRUCTION COMPANY

M/S Sandhu Const.Co.

M/s Harkesh Kumar Bansal

Ms Hari Singh