SPL REPAIR TO BLDG NO. P-146 (08XQTRS) OF 108 INF BN (TA) MAHAR AT GARDEN LINE UNDER GE SAGAR

Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors & pavings not exc 15 cm thickness below or above ground level including removal of deberies complete all as specified and directed

Demolition of PCC of floors (other than ground floors) complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub bases of floors, etc finished the surface even and rough to receive the topping layer complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B-0 using 12.5 mm graged stone aggregate as in floors, etc complete all as specified and directed..

M&L for vitrified coloured tiles 9-10mm thick area of each tiles size 1200 mm X 600 mm in floors set & jointed in neat cement slurry and pointed in white /coloured cement to match the tiles over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

All as per Srl item 06 above but in dado / skirting etc over and including 10 mm thick rendering in CM 1:4.

M&L Non skid ceramic coloured tiles 7 to 8mm mm thick (Square/ rectrangular) area of each tiles 400 mm X 400 mm, in floors as joint free etc over and including 15 mm thick cement screed bed in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8mm mm thick (Square/ rectrangular) area of each tiles 300 mm X 300 mm, in floors as joint free etc over and including 15 mm thick cement screed bed in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for glazed ceramic joint free coloured tiles of size 600X300X7-8mm thick, on vertical surfaces as in skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Machine cut kota stone slab of area not less than 0.30 sqm as in flooring as in landing and entrance of staircase, etc. 20mm - 25mm thick laid laid over and including 20 mm thick screed bed or bedding layer in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

All as per BOQ Serial item No.11 above but as in skirting / dado /risers of steps with & including 10 mm thick rendering in CM 1:4.

M&L for Machine cut kota stone single piece slab as in steps treads,windows cill,20-25 mm thick ,over and including 15 mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing , polishing and rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations the edges complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking of shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutter from frames) exc. 1.5 sq. m but not exc 4.0 sqm each, complete all as specified and directed.

S&F factory made PVC door frame of size 50 mm x 47 mm made out of 5 mm prelam PVC sheet cut at corner and jointed with 02 Nos 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member) complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front face & 5mm plain colour PVC sheet on back face,incl 03 Nos 100mm size stainless steel butt hinges for each shutter, fixed in frame at site as per specification & drawing complete all as specified and directed.

S&F 125 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in P:C:C 1.2.4 type B-1 using 20 mm graded stone aggregate including PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate for filling in pressed steel frame complete all as specified and directed.

S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in P:C:C 1.2.4 type B-1 using 20 mm graded stone aggregate including PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate for filling in pressed steel frame complete all as specified and directed.

S&F 35 mm thick flush shutters, factory made solid core construction, with block board core and plywood face panels, commercial type on both sides including both side decorative laminate 0.9mm thick type 1 of surface finish, colour and pattern as approved & fixed with approved adhesive as per manufacturer instruction complete all as specified and directed.

S&F 2nd class hardwood factory made glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkats complete all as specified and directed.

S&F Stainless steel wire cloth 0.36 mm nomiral dia and wire and average width of aperture 1.40 mm fixed with SS staples etc complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

S&F butt hinges 100 mm, ISI marked, long extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed complete all as specified and directed.

S&F 300mm long Aluminium alloy anodised Sliding door both with hasp, staple (bolt type), ISI marked and fixed clips of sheet , cast or extruded sections and fixing bolts and sliding of extruded sections or cast -aluminium alloy and fixed with steel screws complete all as specified.

S&F 250mm long Aluminium alloy anodised Sliding door both with hasp, staple (bolt type), ISI marked and fixed clips of sheet , cast or extruded sections and fixing bolts and sliding of extruded sections or cast -aluminium alloy and fixed with steel screws complete all as specified.

S&F for 200mm size Aluminium anodised barrel tower bolt of extruded section and fixed with screws complete all asb specified.

S&F 150mm extruded aluminium alloy handles, fabricated type, anodisec fixed with steel screws complete all as specified and directed..

S&F MS 150mm single action spring hinges with steel wire spring, stove enamelled, black complete all as specified and directed..

S&F door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, 150mm long, fixed in door complete all as specified and directed..

S&F aluminium windows sliding type three track powder coated consisting of frame bottom with sutter of size min 92X31.75 mm,side and top of size min 92 X31.75, shutters vertical 39X20 mm,shutter top &bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and concealed locking arrangements with 4 mm thick plain sheet glass with rubber gasket,brush and aluminium beading , handle, aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as specified and directed. (Note:- weight of aluminium section shall be 0.55 Kg/RM as per IS).

S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frusted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.36 mm dia and aperture size 1.45 mm to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed by Engr-in- Charge (Al. section thickness 1.50 mm)

S&F Mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 6 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm longincluding MS angle iron frame 40mm x40mmx6mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and as directed. (Single shutters of approx width 0.7 to1.2 m and ht 1.9 to 2.10 M)

S & F Mild Steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed.

S&F provn of 25 mm bore SS Pipe curtain rods including SS brackets & SS decorative dome, suitable for door/widows curtain with fancy type SS decorative dooms with ss brackets fitted to each end and fixed to wall with wooden battens incl. removal of existing rod/pulmets and making good complete all as specified and directed.

M & L for Green Marble work 18 to 20mm thick(table rubbed and polished,) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed.

M & L Provn for 18mm to 20mm thick solid factory made PVC board for cupboard /kitchen cabinate shutter with one side 1mm thick printed pvc sheet other side plain pvc sheet suitable fixed with &including suitable pvc frame, matching colured beading to cover all edges & screwed portion of frame, Magnetic catcher with all necessary fixing arrangement as per specification & drawing complete all as specified & directed.

M & L provn for Machine cut cudappah stone in racks, cup boards,shelves etc slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade Of the slab including ,making grooves in walls to insert, rubbing and polishing complete all as specified and as directed.

M&L for rounding, chamfer, splays or arris and smooth finishing at the edges of stone as in steps, cooking platform and other similar locations complete all as specified and directed.

Demolition of RCC in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M&L for reinforcement cement concrete 1:2:4 type B0 Nominal mix (using 12.5mm graded stone aggregate) as in chajjas / landing slabs including use and waste form work and necessary scafolding up to height 6.00 mtr complete all as specified and directed.

M&L RCC 1:2:4 (nominal mix) type B1 using 20mm graded stone aggregate as in landing, cooking platforms, shelves and the like complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work not exceeding 200mm thick (Horizontal or sloping) all as specified and Directed

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings,openings in concrete wall, floor and roofs sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but not exc 10cm wide complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Taking up or down steel tubing & connections incl cleaning for re-fixing or removal from site for 15 mm dia bore complete all as specified & directed..

S&F 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl fittings and the holes in walls and floors shall be made by drilling with drill or jumper and not by dismantling the brick/concrete. After fixing holes shall be made good with CM 1:3 properly complete all as specified.

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10 cm girth complete all as specified and directed.

Taking up or down steel tubing & connections incl cleaning for re-fixing or removal from site for 20 mm dia bore complete all as specified & directed..

S&F 20 mm bore of GI Tubing medium grade with all fittings on walls/ceiling or laying in floors incl fittings and the holes in walls and floors shall be made by drilling with drill or jumper and not by dismantling the brick/concrete. After fixing holes shall be made good with CM 1:3 properly complete all as specified.

Dismantling water tanks of capacity exc 250 but n.exc 500 ltr & S&F 500 ltr capacity of rotational moulded polyethyline water storage tank, ISI Marked, (Cylindrical vertical with screw lid) hoisted & fixed in position incl S&F 20mm dia GI Pipe medium grade washout pipe 450mm long with plug & 20mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified & as directed.

S&F in repairs 20mm Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixedm complete all as specified and directed.

S&F in repairs 20mm dia bore Gun metal, Globe or gate valves, with iron head or lever screwed both ends for iron pipe fixed, complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste coupling and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm x 254mm, bowl size 410mm x 330mm x 160mm complete all as specified & directed.

S&F provn of stainless steel plate rack of Size 900mm x 600mm x 250mm made of 1mm thickj stainless steel sheet complete all as specified and directed.

S&F in repair vitreous china squatting pan 'Orisa pattern' size 580x440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including 'P' or 'S' Trap, etc complete all as specified and directed complete all as specified and directed.

S&F in repair PVC low level flushing cistern of 10 Ltr capacity, dual (5 Ltr / 10 Ltr) valve less including flushing pipe bend PVC bend, PVC connection etc. complete all as specified and directed.

S&F in repair vitreous china WHB white flat back size 550mm x 400mm with and including MS brackets, CP pillar tap fancy type - 01 No of 15mm bore, CP waste coupling 32mm dia, 32mm dia PVC waste pipe of suitable length and PVC connections 15 mm size with PTMT nuts of length 450 mm high pressure complete all as specified & directed.

S&F in Wash hand basin mixture15mm bore cast copper alloy, with capstan heads, chromium plated, screwd down high pressure, with lettered 'hot' or 'cold' with long screwed shanks and fly-nuts, screwed for iron pipes and fixed complete all as specified and directed.

S&F in repair 15mm bore CP fancy type brass bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs chromium plated Angle valve 15 mm dia, fancy type screwed down light pressure screwed both ends for iron pipe or for union complete all as specified & directed

S&F in repairs concealed stop valve 15mm bore dia, cast copper alloy, CP fancy type with long shank and cup screwd down, high pressure, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.

S&F in CP hot & cold water wall mixure unit with arrangement for overhead shower and with hot & cold valves cast copper alloy type heavy duty fixed to 15mm bore of pipe complete all as specified and directed.

S&F in repair 125 mm size brass chormium plated shower rose fancy type with long body including fixing to steel pipe or union complete all as specified and directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 105gms) approximate size 140x 90x50mm fixed to wall etc complete all as specified and directed.

S&F in repairs PVC connections 15mm bore size 450 in length with both end brass/pvc high quality nuts complete all as specified & directed.

S&F CP tubular towel rail 600mm long between flanges, 20mm dia, D type etc all as specified.

S&F in repairs 110mm dia PVC(SWR) pipes single socketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified

S&F in repair PVC (SWR) Pipe single socketed in any length with rubber ring joint & fixed to wall with clamps for 110mm dia complete all as specified & as directed.

S&F in repair PVC Bends any radius 110mm bore complete all as specified & as directed.

S&F PVC (SWR) 110 mm dia junction, single (single 'T') equal or unequal with access door complete all as specified & directed.

S&F 110mm bore PVC (SWR) vent cowl, complete all as specified & directed.

S&F in repairs 75 mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified

SS&F 75 mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall with & including clamps complete all as specified

S&F in repairs 75mm dia PVC (SWR) multi floor trap with Hinge type SS grating including jointing with solvent cement complete all as specified & directed.

S&F in repair PVC Bends any radius 75mm bore complete all as specified & as directed.

S&F PVC (SWR) bends 75 mm dia with accessable door complete all as specified & directed.

S&F PVC (SWR) 75 mm dia junction, single (single 'T') equal or unequal with access door complete all as specified & directed.

Demolation of brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed.

M&L for brickwork with subclass 'B' bricks (old size), straright or curved on plan exceeding 6m mean radius built in Cement Mortar 1:6 complete all as specified and directed.

Demolition of cement concrete of any description and in any position etc all as specified and directed.

M&L for cement concrete 1:4:8 Type D-2 (using 40 mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in manholes benching,floors and the like including weathering, slightly rounded or chamfered angles and throating including form work complete all as specified and directed.

M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished fair and even complete all as specified and directed.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including use and waste form work complete all as specified & directed.

M&L for brick work with sub class 'B' brick (old size), in cement mortar 1:4, straight or curved on plan to any radius in half brick thick wall complete all as specified & directed.

M & L broken stone or boulders hard core of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-1 (using 20mm graded stone aggregates) as in plinth protection surface finished even and smooth without using extra cement & provided with construction joint on the interval not more than 3.0m and filled with bitumen and sand mortar in 1:3 complete all as specified & directed.

Taking down cement or cement lime plaster any description on brick or stone masonary walls etc. including raking out joints, hacking for key, scrubbing down with water etc and rubbish off the premises complete all as specified & directed.

M & L cement plaster in two layers on stone / brick masonry surfaces or surfaces other than fair face of brick work, first layer 15mm thick in cement mortar (1:6) and second layer 5mm thick in cement mortar (1:4) with WPC @ 200 ml per bag of cement, finished the surfaces even and smooth without using extra cement complete all as specified & directed.(WPC will measured and paid seperately under respective item)

M&L for preparation of newly plastered surfaces of wall and finishing walls with applying white cement based wall care putty 2mm thick and acrylic smooth exterior paint of required shade, applying two or more coat of paint @ 1.67 ltr / 10 sqm and priming coat of exterior primer @ 2.20kg / 10 sqm complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6),and in finished the surfaces even and smooth complete all as specified & directed.

M & L for applying two coat of interior oil emulsion over a coat of wall primer incl. preparation of newly plastered walls etc and applying white cement based wall care putty 2mm thick in two layers of 1mm each for leveling the surface complete all as specified and directed. NOTE :- The VOC contents of the distemper shall be less than 50 gms per litre. The shade & colour shall be as approved by GE.

M&L Rendering 5mm thick on fair faces of concrete surfaces in CM (1:3) in finished even and smooth without using extra cement in ceiling complete all as specified and directed.

M&L for applying two coats of interior oil emulsion over a coat of wall primeron newly plastered ceiling surfaces including preparation of surfaces complete all as specified & directed.

M&L for complete removal of existing treatment from old plastered surfaces of ceiling including preparation of old surfaces smooth with sand paper and including M&L for applying of distemper oil emulsion on ceiling surfaces complete all as specified & directed.

M & L for complete removal of existing treatment on walls and Preparation of old surfaces and M & L for applying necessary levelling course to the surfaces including properly making of V shape crakes and filling of all cracks with crack seal of walls and including applying two coat of interior oil emulsion over a coat of wall primer and applying white cement based wall care putty 2mm thick in two layers of 1mm each complete all as specified and directed.

M & L for complete removal of existing treatment on walls and Preparation of old surfaces smooth with sand paper and finishing walls with acrylic smooth exterior paint of required shade : two coat applied @ 1.67Ltr/10sqm over and including priming coat of exterior primer applied @ 2.20 kg/10sqm) including properly making of V shape crakes and filling of all cracks with crack seal of walls and applying white cement based wall care putty 2mm thick in two layers of 1mm each complete all as specified and directed.

Supply only Integral waterproofing compound complete all as specified and directed

M&L for Treatement for sunken portion of bathroom,toilets etc as per following specifications :- (i) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (ii) M&L for providing 12 mm dia holes of 40mm deep @200mm c/c at junction of beams and columns as co-ordinal points for inserting/pouring cement slurry with dr fixit grouting compound by pressure grouting for sunken floors of bathroom/toilet , includindg sealing the holes with CM 1:3, all as specified and as directed by EIC. (iii) M&L for water proofing plaster for sunken portion in CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 200 ml per 50 kg bag of cement and finishing the surface even and smooth without using extra cement. (iv) M&L for applying two coats of Dr fixit compound suitable for sunkun treatment as per manufacturer instructions over vertical surfaces and floors of sunken of toilet including cleaning of surfaces. (v) M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in filling (sunken portion). etc. (vi) M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate, mixed with WPC @ 200 ml per 50 kg bag of cement, as sub base, 75mm thick on top. Note :- Above includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect.(b) The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with Dr fixit suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated (c) Horizontal flat surface area to be measured complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in padding on roof surface for correcting / making proper slope on roof, surface finished fair and even without using extra cement complete all as specified & directed.

M & L 10mm thick plaster in CM 1:4 with WPC @ 200ml per bag of cement will be applied over the roof slab when concrete is green after the plaster is cured the roof will be tested for water tightness by ponding with water for seven days for any seepage/leakages etc. If any seepage is observed the rectification will be carried out by pressure grouting under the pressure of 5kg/Sqcm using cement based cement grout. After the surface is repaireds the slab will be tested for water tightness again before proceeding with further treatment , complete all as specified and directed. Note : WPC will be measured and paid separately as supply only

M&L for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Taking down of old existing accsseible/non accsseible roof, roof treatment of any description including mud phushka, lime, concrete,tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m height etc complete all as specified and directed.

M&L for provn of water proffing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items and all as specified:- (i) The surface of accsseible/non accsseible roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed. A fillet of PCC (1:2:4) of 100x100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of dirction. The membrane should not be taken over at any steep turns and hence all corners/timers should be rounded. (ii) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated. (iii) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm (iv) Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc. (v) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane

M&L for cool roof coloured ceramic joint free tiles 8-9mm thick 300x300mm size , white confirming to sun reflective Index (SRI) value minimum of 90, laid with 3 mm thick spacers, & joints should be filled with epoxy joint filling compound on 15 mm thick over & including 1:3 CM screed bed complete all as specified and directed.

M & L Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces in non accessible roof,complete all as specified and directed at site .

M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub bases of floors, etc finished the surface even and rough to receive the topping layer complete all as specified and directed.

M&L provn for coloured designer (anti slip with grip) tiles for parking / pathway of size 300x300mm exterior grade, heavy duty 9-10 mm thick laid over and including 15 mm thick cement mortar 1:6 set and jointed in floor and pointed in neat cement slurry with grey cement and pigment in floor etc and removing rubbish from site complete all as specified and directed.

Taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed.

M&L for concealed point wiring for one light point or fan point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor (stranded) 1100 volt wiring cable in & including ISI marked PVC conduit of size not less than 20mm, ivory/white in colour with all accessories (such as tee, bend, joint cover etc) including suitable size modular metal boxes with cover plate along with frame for mounting of switches/sockets/ regulator etc and continuous earth lead cable wire of similar description complete all as specified and direcited. Note:- (i) Wiring cable shall be provided using colour coding such as Phase - Red, Neutral – Black, and Earth – Green or as approved by Engr-in-charge . (ii) Cutting, chassing in walls (brick or stone) shall be measured and paid separately under respective item here-in-before.

All as per item No. 114 above but point wiring for one call bell point controlled by one push button switch.

All as per item No. 114 above but point wiring for one 5 Amp independent socket point controlled by one switch with 2.5sqmm wiring cable.

All as per item No. 114 above but point wiring for one 3 pin ,5 Amp socket point with other switch on the same board with 2.5sqmm wiring cable.

All as per item No. 114 above but point wiring for one one light point controlled by two way switch

All as per item No. 114 above but point wiring for one 5/6 pin, 15/16A socket outlet with 2.5sqmm wiring cable.

S&F Modular switch, one way, 5/6 Amp 230, 1 module complete all as specified and directed.

S&F Modular switch, two way, 5/6 Amp 230, 1 module complete all as specified and directed.

S&F Modular socket outlet, 5/6 Amp-2/3 pin combined, 2 module complete all as specified and directed.

S&F switch Modular, single pole, one way,15/16 Amp ,1 module 230 Volt complete all as specified and directed.

S&F socket outlet modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed.

S&F ceiling rose, surface backlite,three terminal complete all as specified and directed.

S&F lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed.

S&F modular fan step regulator 60/80W, 2 module complete all as specified and directed.

S&F modular bell push 5/6Amp, 1 module complete all as specified and directed.

S&F call bell ding dong, 230 volt, single phase complete all as specified and directed.

S&F TL fitting 20/18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed.

S&F box type LED optic fitting 10/9 Watt 2 feet box type complete all as specified and directed.

S&F LED light fitting 1x9W/1x10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper wound, sweep 250MM complete all as specified and directed.

Taking down and refixing connecting electric water heater (Geyser 25 ltr capacity) including supply and fixing of PVC pipe, fastner complete all as specified and directed.

Taking down existing exhaust fan of any size and refixing after repair/servicing complete all as specified and directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades, deposited to MES store complete all as specified and directed.

S&F LED bulb 10watt suitable for angle / batten holder fitting complete all as specified and directed.

S&F ceiling fans with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including clamp and fastner complete all as specified and directed.

Taking down and refixing connecting electric meter SP up to 60 Amp including S&F suitable board close recessed type of suitable size complete all as specified and directed.

M&L concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit conduit less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed. Note: (i) cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. (ii) Two runs of single core for main current and one run of single core for earth continuity conductor & one run of PVC Casing-n-caping shall be measured as one unit length.

S&F MCB single pole (SP) 6 Amp to 32 Amp, 240 Volt, 10 KA, C-curve connected with suitable lugs complete all as specified and directed.

S&F MCB single pole (SP) 40/60 Amp, 240 Volt, 10 KA, C-curve connected with suitable lugs complete all as specified and directed.

S&F MCB SPN 32-40 Amps, 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed.

S&F sheet metal enclosure distribution board (DB) double door, IP-43, SPN, 8 way, 240 V with 200 Amps rated bus bar of suitable size, including taking down existing DB complete all as specified and as directed.

S&F double door metallic sheet metal enclosure distribution board (DB), VTPN suitable for housing 63Amp MCCB as incomer 4 Way 415 Volts with 200 Amps rated bus bars, including taking down existing DB complete all as specified and as directed.

S&F MCCB, 63 Amps 4 pole, 415 V,16 KA, connected in wall /surface with wire and lugs complete all as specified and as directed.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

M&L for bracket for street/security/bldg/flood light made of 40 mm dia medium grade GI pipe of length not less than 1.5 Mtr long and bent to a shape incl fixing on pole / wall with 02 Nos MS flate clamp of suitable size incl nut bolt and washers, including taking down existing Bracket with clamp complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.

Supply & laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 35sqmm 3.5 core including taking down old unserviceable cable complete all as specified and directed.

Excavation in trenches in hard/dense of soil not exceeding 1.5 metre wide and not exceeding 1.5metre in depth and getting out complete all as specified and directed.

Returning filling in with excavated soil, including spreading, leveling watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removing excavated materials (soil) not exceeding 50metre and depositing where directed at a level not exceeding 1.5 meter above starting point complete all as specified and directed.

Supply and laying sand cushioning with local dry and clean sand over and under the cable for protection of cable , 80 mm thick before laying the cable 150 mm thick after laying the cable complete all as specified and directed. Note:- Only punned thickness of 180mm shall be measured for payment.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250mm x 150mm x 40mm complete all as specified and directed.

Supply & Fixing steel tubing GI light grade 40 mm dia for cable protection passing under Road/Floor or for fixing on walls complete all as specified and directed.