REPAIR TO BR WORKS IN THE AREA OF DET SIG CMP DET STN HQ AND CAMPUS AREA STN OFFRS MESS BSO YARD AGE EM YARD BR YARD FILTRATION PLANT AND GARRISON GROUND UNDER GE MIS MHOW

Amount

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 but n.exc 4.0 sqm each complete all as specified.

Taking down shutters of any description n.exc 1 sqm each complete all as specified

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified.

S & F second class hard wood plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified.

M&L for resecuring or easing and adjusting without taking down shutter of any description n exc 1.0 sqm each complete

M&L resecuring or easing and adjusting without taking down shutter of any description exc 1.0 sqm but n.exc 2.0 sqm each complete.

S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified

S&F 35mm thick second class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified.

S&F 30mm thick factory made, second class hard wood,glazed and skeleton window/ventilator shutters, open repeated and prepared to receive glass,gauze etc (with sash bars) edges of framing plain, chamfered or rounded ,fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24 (b) and for window and fixed with chowkats, chemically pressure treated complete all as specified

S&F second class hard wood 35 mm thick glazed and skeleton (doors) shutters, open rebated and prepared to receive glass gauge etc, (with sash bars) edges of framing plain, chafered or rounded , fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part I, Section 8, clause 8.2 (a) Supplied and fitted to chowkats complete all as specified

S&F factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm thick plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified .

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified .

M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S & F galvanised mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised wire staples,etc complete all as specified

S & F in repairs galvanised mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised wire staples,etc complete all as specified.

S&F sheet glass ordinary quality plain 3mm thick and glazing with oil putty in squares. not exc 0.5 Sqm each complete all as specified

Hacking out old broken glass ( any tickness size ,quality or description ) from wooden frame or stone etc and S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes complete all as specified .

S&F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed

S&F in repair 75 mm size Butt hinges medium weight cold rolled mild steel and fixed

S&F 150 mm long Aluminum anodized barrel tower bolts of extructed section

S&F aluminum alloy handles fabricated anodised of 100 mm long.

S & F in repairs MS framed work as in doors or gates of angle iron, door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanksand fixing and similar work confirming to fe 290 Gde E-165 complete all as specified.

S&F fabricating coloured powder coated aluminium frame work for door shutter ,windows , ventilators with one or more rebates sections of approved tint as required for portions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed.

S&F aluminium coloured power coated window and ventilator shutters, sliding type without sash bar aluminium section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete all as specified and directed.

S&F in repair aluminium coloured power coated door shutters, aluminium section weighing minimum 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. .

S&F 4.8 mm thick plain or tinted glass n.exc 0.5 Sqm in each pan ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition including necessary cutting / moulding and chainferring of edges for service window/counters complete all as specified.

S&F in repair aluminium (extructed section) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter and fixed

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete

S&F in repair 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring and rubber piece in floor, etc complete

S&F in repair 25 mm dia mild steel chromium plated drappery curtain rod with fixing bracket complete

S & F 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in lieu of screw etc in roof, wall etc completed all as specified.

Taking down cement plaster on brick wall/stone wall, ceilings, etc, racking out joints, hacking for key & scrubbing with water completely complete as specified and directed.

Demolition of brick work built in cement mortar including all quions ,arcches , pillars etc complete all as specified and as directed.

M & L for brickwork with sub class 'B' modular bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified.

M&L for10mm thick plastering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.

M&L for 15 mm thick cement plaster in CM 1:4 mixed with WPC @ 3% by weight of cement on brick work or concrete surfaces externally and finished the surface even and smooth without using extra cement Note :- WPC shall be measured & paid separately under relevent item

Supply only water proofing compound

M&L for 5 mm thick plastering in CM 1:3 finished even and smooth without using extra cement as in ceiling

M & L for preparation of old decorated surface and washing, scrubbing down on ceiling and applying two coats of white wash complete all as specified.

M & L for applying two coats of 1st quality oil emulsion distemper over a coat of primer over cement base wall care putty on new prepared surface of wall complete all as specified Note:- Putty shall be measured and paid seperately under relevent Item

M & L for preparation of new plastered surfaces of walls and applying two coats of Acrylic Smooth exterior paint of required shade (@ 1.67 litres/10 sqm) over a coat of primer(@ 2.20 kg/10 sqm) of same make base all as specified . Make :- Asian- Apex or Equivalent.

M&L for complete removal of existing treatment from surface of walls including brooming , scraping down, Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying two coats of 1st quality oil emulsion distemper white/coloured over a coat of primer of same make over a coat of cement base white wall care putty ( if required) all as specified and directed by Engineer-in-Charge. Note:- Putty shall be measured and paid seperately under relevent item

M&L for preparation of old decorated surfaces of wall including brooming , scraping down, Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of 1st quality oil emulsion distemper all as specified and directed.

M&L for preparation of old painted surfaces of wood/wood based materials exc 10cm in width or girth and applying one coat of synthetic enamel paint

All as per item No. 45 above but on steel surfaces.

M&L for preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying two coats of 1st quality interior plastic emulsion paint white/coloured over white cement based putty (if required) all as specified and directed by Engineer-in-Charge. Note:- Putty shall be measured and paid seperately under relevent item.

M & L for preparation of old decorated surface of wall including brooming, down, scrapping down smoke spot and stopping nails mark by filling by white cement base putty and applying one coat of Ist quality interior plastic emulsion paint white/coloured all as specified.

M&L for preparation of old decorated surfaces of wall including brooming , scraping down. smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of exterior weather proof water base emulsion paint white/coloured over a coat of primer of same make all as specified and directed. Make Asian- Apex or other Equivalent

M&L for preparation of old decorated surfaces of wall including brooming , scraping down, smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying two coats of Acrylic Smooth exterior paint of required shade (@ 1.67 litres/10 sqm) over a coat of primer(@ 2.20 kg/10 sqm) of same make over white cement based putty (if required ) all as specified and directed. Make :- Asian- Apex or Equivalent Note:- Putty shall be measured and paid seperately under relevent item

M&L for applying one coat of 2mm thick wall care putty on walls all as specified

M & L for preparation of old decorated surfaces of walls plastered or unplastered by brooming down or steel wire brushing, scrapping down smoke soots, moulds ,moss and efflorecent salts and treading oil and greasy spots etc and applying two coats of cement based paint complete all as specified.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all as specified and as directed .

M&L for PCC (1:2:4) type B0 using 12.5 mm graded crushed stone aggregate as in sub base, levelling course, etc complete all as specified.

M&L for PCC1:4:8 type D2 using 40mm graded stone aggregate as in sub base of floor, etc complete all as specifiedd

M & L for 75mm thick cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish off the primeses complete.

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1: 6 complete all as specified

M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 complete all as specified

M&L for scratch free vitrified ceramic tiles 8-10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified

All as per item No 60 above but as in skirting/ dado etc with and including 10mm thick backing coat in cement mortar 1:4 on wall complete all as specified .

M&L for glazed ceramic coloured tiles of size not less than 300x250x7 mm thick on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified

M&L for glazed ceramic coloured tiles of size not less than 450x300x7 mm thick on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including 10 mm thick backing coat in CM (1:4) complete all as specified.

Demolition of Stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified

M&L for chequered cement concrete tiles with grey cement and pigment of size 25cmX25cmX25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified.

M & L for machine cut kota stone slab in flooring 20-25mm thick of size not less than 595x595 mm as in floor laid over and including 15mm thick screed bed in CM 1:6 & set jointed and pointed cement mixed with pigment to match the shade of slab including rubbing and laid over and including and polishing complete all as specified and as directed.

M&L for 18-20 mm thick green marble of approved quality of requried size set and jointed in grey cement slurry laid over and including 15 mm thick screed bed in CM (1:4) including polishing by using mechanical grinder and moulding edges compete all as specified and as directed.

M&L for rounding to edges of stone slab as in steps,cooking platform,and other similar situation complete all as specified and directed.

M&L for 60mm thick machine pressed rubber moulded precast concrete interlocking paver block (glossy finish) with grey cement and pigment of M-35 grade of approved shape, size and colour confirming to IS 15658-2006 and including joints filled with sand complete all as specified .

M&L for stone dust as in levelling course of interlocking tiles and complete all as specified

S & F for precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in kerb and edging to road and footh path, etc including chamfered,weathering, throating etc and setting in CM (1:4) complete all as specified.

Demolition of cement concrete (unreinforced) in roof/terrace other than ground floor etc, including removing carefully existing roof treatment of any description not exceeding 15cm thickness acomplete all as specified

M&L for roughening old plastered surface of roof by picking, sweeping clean and washing down with water to remove dust complete all as specified.

M & L for Brushing with neat cement slurry @ 3 Kg per Sqm mixed with integral water proofing compound all as specified and directed Note : - WPC shall be measured and paid separately under respective item.

M & L for rendering 10mm thick in cement mortar 1:3 mixed with integral water proofing compound while concrete surface is green and finish the surface even and smooth without using extra cement all as specified Note :- WPC shall be measured and paid separately under respective item.

M & L for preparation of surfaces and applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete.

M & L for applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces complete Note :- 1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat shall be measured and paid seperately

M & L for 3mm thick APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and directed. Note: Application of APP membrane shall be done by authorised applicator of membrane manufacturer.

M&L for applying two coats of bitumen based aluminium painting @ 0.15 Kg / sqm, each coat on water proofing treatment including preparation of surface as on non assesible area complete all as specified

Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or other equivalent as approved.

M & L for providing precast cement concrete louvers and jallies 50mm thick (measured solid) with cement concrete, 1:2:4 type B0 using 12.5mm graded aggregate set in cement mortar (1:4) including all moldings but excluding frame complete all as specified

S& F in repair Rotational moulded Polyethylene water storage tank 500 liters capacity (cylidrical vertical with closed top) of double layered hoisted and fixed in position all as specified in SSR part I complete

S& F in repair Rotational moulded Polyethylene water storage tank 1000 liters capacity (cylidrical vertical with closed top) of double layered hoisted and fixed in position all as specified in SSR part I complete

S&F in repair of 15mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Minimum Weight 142 gms)

S&F in repair of 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Minimum Weight 210 gms)

M&L for cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 250 litres but not exceeding 500 litres complete all as specified

All as per item No 86 above but exceeding 500 litres but not exceeding 1000 litres capacity complete all as specified

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store complete .

All as per item no 88 above but for 20mm bore

S&F 15mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,complete all as specified .

All as per item no 90 above but for 20mm bore

S&F in repair 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete

S&F in repair CP pillar taps (swan neck type) cast copper alloy CP with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete .Make-Plumber/Essco of jaguar(Economical Range)

S&F in repair CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete . Make-Plumber/Essco of jaguar(Economical Range)and directed..

S&F in repair fancy type chromium plated15mm bore two way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete . Make-Plumber/Essco of jaguar(Economical Range)

S&F in repairs concealed stop valves fancy type chromium plated with long shanks and cup fixed with 15 mm dia bore pipes complete

S&F in repair 125 mm size chromium plated shower rose with siwel joint and arm not less than 20cm long suitable for 15 mm bore GI pipes Make- Plumber/Essco of jaguar(Economical Range)

S&F in repair vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified and as directed .

S&F in repair vitreous china squatting pan `Orissa ' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe etc and lime concrete bedding including 'P' or 'S' trap complete all as specified and as directed.

S&F in repairs PVC valve less,syphonic action type flushing cistern 10 litres capacity low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever complete all as specified Make- Plumber/Essco of jaguar(Economical Range)

S&F in repair water jet spray CP 15 mm bore size along with PVC cord to EWC complete all as specified Make-Plumber/Essco of jaguar(Economical Range)

S&F in repair health faucet with flexible pipe of one metre length including wall hook complete all as specified Make-Plumber/Essco of jaguar(Economical Range)

S&F in repair vitreous china wash hand basin white flat back of size 550x400 mm including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified .

S & F in repairs vitreous china wash basin white (oval shaped under counter) of size 550 x 400mm including 32mm brass CP waste coupling complete all as specified .

S&F in repairs vitreous china urinal half stall white (excluding flushing cistern & flush pipe) grating and union for discharge pipe, urinal spreader with waste pipe and all fitting for urinal.complete all as specified

M&L in repairs cast iron floor trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate ,75mm dia outlet complete all as specified .

S & F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating including joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450 mm long

S&F in repairs PVC waste pipe for urinal/wash basin/ sink pipe 32mm bore 65cm long

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc complete all as specified .

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings etc complete all as specified .

S&F 0.50mm coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof seeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and minimum 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section as in un-framed work complete .

S&F mild steel Hollow Section work in tubular trasses purlins, rafter, tubuler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 and IS-1161-1979 grade ST-240 complete all as specified.

S&F mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming IS-1161-1979 grade ST-240 complete all as specified .

S&F Mild steel plates (Plain or chequered) as in shoe plate, base plate and gusset plates forming holes for roof frame work, trusses, rafters etc of grade Fe 410 WA. complete all as specified

M&L for preparation of new steel surfaces, of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

S&F Aluminium Composite Panels (ACP) any colour of exterior edge for cladding near entrance of Alucobond/Alstrong/Brand approved or other equivalent make for external wall/column/canopy cladding in combination of solid/Metallic colours, including all necessary frame work and complete weather sealing. The composite panel shall consist of 3mm thermoplastic core of LDPE sandwiched between 2 skins of 0.5mm thick aluminium sheet (alloy designation 310S) making a total panel thickness of 4mm. The surface shall be furnished with Lumiflon based flourcarbon coating on top sides and service coating on reverse side. Coatings shall conform to specifications of ECCA/AAMA and conforming to the mechanical properties of panel as per detailed technical specifications. The system shall be fixed by using GI brackets and stainless steel bolts and nuts complete with spring washers and cap nuts and all other necessary accessories. The bracket support shall be designed as per manufactures specification and shall withstand a wind pressure of 150 Kg/Sqm and all hardware shall corrosion resistant frame out of anodised aluminium member.

S&F writting letters or figures (Block, Roman, Italic or Indian) with acrylic/PVC material n exc 50mm (depth of letter) and not exc 40cm high, n exc 30cm width each letter fixed at site over granite/stone/wall/plate/ACP or any surfaces including all fixing arrangements, adhesive/brass screw, etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified

S&F Gypsum Board 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre on GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre inluding finishing the joint of face board with specially formulatted jointing compound and 48 mm wide fibre tape to provide seamless finish Ceiling shall be sealed at joints and finished with jointing compound etc complete including finishing the exposed surfaces of false ceiling with two coats of plastic emulsion paint over a coat of primer complete all as specified and directed.

S & F anodised aluminium snap grid of size (605mmx605mm) frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

S&F exposed metal frame ceiling with 6mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified Note :-Frame work for ceiling shall be measured and paid separately

M&L for grinding and polishing the existing kota stone flooring complete by using requried polishing machine with polish material all as specified and as directed by Engineer-in-Charge

S&F in repair 25 mm dia mild steel PVC coated drappery curtain rod with brass /nickel chrom polish bracket for each curtain complete all as specified.

ss construction

m/s modern builder

M/S Sunshine Construction

M/s Himgiri construction