Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.0 LAccepted-AOC | L1 | Accepted-AOC Lowest bid found in order | |
| 2 | L2₹42.0 L+₹1.5 L (3.66%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest bid |
Tender Value
Refer Docs
EMD Value
₹73,000
Closing Date
25 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS C/O 56 APO
GE 874 EWS C/O 56 APO
PROVN OF OFFICE SHELTER FOR STRONG ROOM AND CRYPTO CENTRE AT 8 SECT RR SIG COY AND SPL REP TO BLDG NO P 279 AT VAJR OFFRS COLONY UNDER STN HQ ZANGLI
2023_MES_608087_2
GE 874/EWS-41/2023-24
Open Tender
Civil Works
Item Rate
180 days
Kupwara
As per NIT and tender documents
7 documents required · 7 mandatory
₹500
GE 874 EWS
₹73,000
Yes
10 Nov 2023
26 Aug 2023
2 Oct 2023
26 Aug 2023
25 Sept 2023
2 Sept 2023
Amount
BR and EM Portion
Dismantling floor, hearth or wall tiles including cement mortar bedding complete.
Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete.
M&L for Plain cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in 75 mm thick sub base for floor finieshes all as specified abd directed by Eng-in-Charge.
M&L for light colour virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match in neat cement slurry and pointed in white or colured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed.
All as per item above but on vertical surface such as skirting, dados, risers to steps, etc., set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M & L for Ist or premium quality of glazes, ceramic “coloured” tiles of premium or first quality of size 350x250x7mm /450x350x7 mm thick as in vertical surface suck as skirting/daddo etc set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick in 1:4 cm backing coats etc complete all as specified and directed.
M&L for Chequered cement concrete tiles 20cm x20cm x 25mm thick,with grey cement and pigment set, jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed in CM 1:6 all as specified and directed by Eng-in-Charge.
M&L for Plain cement concrete 75 mm thick, type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified abd directed.
Dismantling stone slabs and tiles laid, bedded and pointed in any cement mortar of any description or thickness in floors, aprons etc.
M & L for machine cut kota stone slab flooring 20-25mm thick mirror polishied over cement screed base 20 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M & L for machine cut kota stone slab 20-25mm thick mirror polished in riser of steps, skirting, dado and pillar laid over 15 mm cement screed in CM 1:4 and jointed with gray cement slurry mixed with pigment to match the shade of slab complete all as specified and as directed.
Dismantling unframed timber scantlings 40 sqcm and over in section, in any position complete all as specified and directed.
M & L for Second class soft-wood clean sawn as in scantlings unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed by Eng-in-charge.
Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Pre-painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Dismantling wall and ceiling boards ( fibre, pulp, insulation, etc) or insulation ards/slabs/blankets, any thickness including cover fillets. all as specified and directed by Eng-in-charge.
Dismantling boarding, any description, fixed in any position with nails all as specified and directed by Eng-in-charge.
S & F for clean sawn 25mm thick 2nd class softwood with butt joints boarding, fixed with nails in any situation complete all as specified and directed
M & L 2nd class soft wood wall/ceiling paneling of good quality wood planed one side and edge tonged and grooved or rebated other side and dovetailed joints, chamfered both side fixed to frame work with secret nailed as in wall paneling 15 mm including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of the surface, complete all as specified and directed. Note :- Frame work shall be measured & paid separately.
M & L pergo tiles wooden mat finish of size (1200x200x7-8mm) laid over & including PVC foam 5 mm thick with SR adhesive over & including 50 micron polythene sheet complete all as directed by Engr-in-Charge.
Taking down chowkats or frames with shutters (Without taking off shutters fom the frame) exc 1.5 sqm but n.exc 4 sqm each and removing from site.
Taking down chowkats with shutters (without taking off shutters from the frame) n exc. 1.50 sqm each & removing from site.
S & F solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, edges will be painted to match with printed sheet as per specification & drawing complete all as specified and directed.
S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S & F Flush shutters 35 mm thick, Factory made solid core construction, with block board core and ply wood face panels, commercial type on both sides complete.
S&F 35 mm thick second class softwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered beads for securing glass/ gauge complete all as specified in SSR Pt I-1991 section 8 clause 8.20 (a) and as directed.
S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2004 and as directed by GE/Engineer-in-Charge.
S&F aluminium handles 150 mm size cast type, anodised complete.
S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete.
S&F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.
S&F 125 mm size stainless steel butt hinges, medium weight, cold rolled etc complete.
S & F in repair floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring , fixed in floor with over all (length of cover plate 140 mm) complete all as specified and directed.
S& F in repair rubber door seal 32mm wide with aluminium strip of size 19mm wide fixed with machine made steel screw with washer complete all as specified and directed.
S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.
S & F door closer hydraulically regulated, aluminium (Die cast) body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.
Providing and fixing factory made uPVC white colour Sliding window Three track area not exc 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)
S & F 4.8 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area not exc. 0.5 Sqm in each pane complete.
S & F 4.8 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area exc 0.5 Sqm in each pane complete.
Taking down cement plaster on brick wall including racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.
M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4 mixed with water proofing compound, cmplete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately as supply only.
Supply only Liquid water proofing compound.
M&L for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed.
M&L for complete removal of old decorated plastered surfaces of wall including cornices,pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots including filling depressions of scrapped surfaces and applying two coats of oil bound distemper, over and including a coat of 1 mm thick wall care putty with preparation of plastered surfaces complete all as specified and directed.
M&L for complete removal of existing treatment plastered surfaces of wall including cornices, pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces. complete all as specified and directed.
M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete.
S&F 110mm bore, PVC (SWR) pipes, single socket in any length, with rubber ring joints fixed on walls.
S&F 75 mm bore, PVC (SWR) pipes, single socket in any length, with rubber ring joints fixed on walls.
S & F PVC (SWR) bends any radius, 110mm bore, complete all as specified and directed by Eng-in-Charge
S & F PVC (SWR) bends with access door any radius, 110 mm bore complete.
S & F PVC (SWR) bends any radius, 75 mm bore complete.
S & F PVC (SWR) bends with access door any radius, 75 mm bore complete.
S & F granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like 16-18mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed.
Vitreous china counter type wash hand basin, oval type, of size 560mm x 410mm with chromium plated waste coupling long shank type, PVC waste pipe 32 mm bore 600mm long, fixed in repairs, complete all as specified and directed.
Vitreous china one peice European type water closet of size 700mm x 370mm x 760mm and making necessary connection to drain or out going pipe fixed on floor, fixed in repairs, complete all as specified and directed.
Central hole basin/sink mixer, 15mm bore, with popup waste, chromium plated, screwed down for galvanised iron pipes, fixed in repairs, complete all as specified and directed.
Wall mixture, 15mm bore, with telephonic shower arrangement chromium plated, screwed down for galvanised iron pipes, fixed in repairs, complete all as specified and directed.
Chromium plated brass shower rose 125 mm long, fancy type with swivel joints fixed to 15mm bore pipe, fixed in repairs, complete all as specified and directed.
S& F in repair chromium plated towel rack with lower hanger, brass raling, including brass screw complete all as specified and directed.
S&F in repair brass chromium plated toilet paper holde complete all as specified and directed
S& F in repair chromium plated towel ring including brass screw complete all as specified and directed.
S & F in repair Chromium plated corner glass shelf with bracket and 6.3 mm sheet glass including circular cutting, grinding polishing & rounding edges of glass etc. complete all as specified and directed.
S&F in repairs bath room cabinet mirror of hard thermosetting plastic size 625 x 625 mm fitted with superior quality distortion free 4 mm thick mirror complete all as specified and as directed make jindal/commander/gratolite.
S&F in repairs PVC connection 600mm long with check nut etc complete all as specified.
Grating round 100 mm dia of CP (minimum weight 100 gms) fixed in repair complete.
S & F stainless steel drappery or curtain rods, 25 mm dia, with end brackets, decorative type, cut to length as required size, colour coating including matching socketed brackets, complete all as specified and directed.
Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store.
Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store.
M&L for galvanised steel tubes medium grade 15 mm dia fixed to wall or ceiling or laid under floor, complete with necessary fittings all as specified and directed.
M&L for galvanised steel tubes medium grade 20 mm dia fixed to wall or ceiling or laid under floor, complete with necessary fittings all as specified and directed.
S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) complete all as specified and as directed.
On site LLDPE septic tank designed to carry sewage and sullage water, including excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 20 users with upflow filter including media complete all as specified and as directed by Engr-In-Charge.
M&L for RCC NP3 150 mm diameter Pipes laid on150 mm thick bed in 1:4:8 with excavation in any type of soil, including manholes /drop manhole of standard size made of Brick masonry / RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional.
S & F in repair, sink with drainage board made out of stainless steel 1mm thick with plugs, washers and waste pipe including bedding in CM to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size 915mmx460mm bowl size 410mmx330mmxx160mm.
S&F in repair rotational moulded polythene water stoarage tank, cylinderical vertaical with closed top, hoisted and fixed in position, 500 Ltr capacity complete all as specified and directed
Surface dressing n.exc 15 cm deep and getting out in soft /loose soil complete all as specified and as directed by Engr-in-Charge
Excavating over areas, n exc 1.5 m deep and getting outin soft /loose soil as directed by Engr-in-Charge
Excavating over areas, exc 1.5 m deep and getting outin soft /loose soil as directed by Engr-in-Charge
Excavation in trenches Exc 1.50mtr in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and getting out as specified &directed by Engr-in-charge.
Returning filling including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed
M&L for RCC M-30 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.basement slabs, under-reamed piles and mass concrete etc complete all as specified.
M&L for RCC M-30 as Columns, pillars, piers, posts and struts complete all as specified.
M&L for RCC M-30 as Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.
M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter Rough finish
M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions Rough finish
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
M&L for Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips,
M&L for Mild steel TMT bars 5mm dia and over and up to and incl 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips. Gde I IS 432 (part I)
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 as in wall/septic tank/soakage well all as specified and directed.
M&L Rendering 15mm thick on fair faces of brick work, stone masonry or concrete surface, in cement mortar 1:4 finished the surface even and smooth without using extra cement , complete, all as specified
M&L Rendering 10mm thick on fair faces of brick work, stone masonry or concrete surface, in cement mortar 1:6 finished the surface even and smooth without using extra cement , complete, all as specified
M&L for applying two coats of cement based paint over a coat of primer on new plastered surfaces of wall including preparation of surfaces allas specified and directed.
M&L for two coat of accralic Oil Bound Distemper over 2mm thick wall care Putty complete all as specified and directed.
M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
M&L Hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface of broken stone or boulders.
M&L 50 mm thick Plain cement concrete 1:2:4 Type B1 (20mm graded aggregate) as in flooring finishing cement concrete surface even and smooth w/o using extra cement complete all as specified and directed.
S&F false ceiling E-Board 600x 600mm tile 10mm thick semi perforated coloured, Anodised aluminium snap grid frame work (Size of grid 605 x 605mm )with GI suspended system, metal frame work, G.I. wire mesh in flase ceiling complete. make Arms strong/ other ISI MARKED approved by GE . as specified and directed
M&L Mild Steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections )Fe -410-W(gde-E-250) Quality A including distance pieces, cleats etc.
Mild Steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates.
M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified and directed by Engr -in charge.
M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and n exc 15cm long, Diameter of neck in 11 to 15mm complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and all as specified and as directed.
M&L for one coat of synthetic enamel paint overa coat of pink primer on old wooden surfaces including preparation of surfaces over 10 Cm width or girth.
S&F Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required.
S & F Plain, framed, panelled shutters 35mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified.
S&F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all fitting items all as specified and directed by Engr -in charge.
S&F Mild Steel butt hinges 100mm long medium weight.
S&F Mild Steel butt hinges 75mm long medium weight.
S&F 200 Mild steel barrel tower bolts, stove enamelled black, with bright bolt
S&F 100 Mild steel barrel tower bolts, stove enamelled black, with bright bolt
S&F300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.
S&F Mild steel pressed handles, oval type, stove enamelled black.
S&F Mild steel pressed handles, oval type, stove enamelled black.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded.
All as above but without glazing bars for wire cloth Mosqueto proofing.
M&L DPC in CM 1:2:4 type B-0 to horizontal or vertical surfaces including necessary formwork using WPC as per manufacturer's instructions complete all as specified and directed.
M&L for prepration of new plaster surface of wall and applying three coat of white wash complete all as specified and directed.
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade. laid over 20mm thick sand cushinoning complete all as specified.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, Bracke sketch fitting, ceiling roses, lamp holders, brackets, pendants, regulators, sockets, light fitting etc. removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by EIC. Note:- The damaged surfaces to be made good with plastering (1:6). & applying colour wash in required coats to matching with existing surfaces as directed by Engineer-in-charge. Cost of the same deem to be included in quoted rates and nothing extra on this account admissible.
M & L for Modular point wiring for one light/one fan controlled by one switch with 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with and including PVC concealed conduit ISI maked heavy duty for one light fan/bell point controlled by one switch including modular cover plate of suitable way matching with surrounding modular boxes with suitable size including PVC green insulated unsheathed 1.5 sqmm multistrand copper conductor FRLS cable as continous earthwire and connecting to earth duly, complete all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)
All as per item above but MODULAR 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.
All as per item above but MODULAR 3 pin 5 amps socket outlet on independent Board complete all as specified and directed.
All as per item above but MODULAR 15/16 Amps socket outlet on inependent board with 2.5 sqmm copper conducter FRLS cale and 2.5 sqmm PVC insulated unsheathed coper onductor cable FRLS (Green Colour) as earth lead complete all as specified and directed.
M&L for modular white cover plate with frame 8 module complete all as specified.
M&L for modular white cover plate with frame 6 module complete all as specified.
M&L for modular white cover plate with frame 4 module complete all as specified.
M&L for modular white cover plate with frame 3 module complete all as specified.
M&L for modular white cover plate with frame 2 module complete all as specified.
S & F Modular switch 1 way 6 A, 1 module complete all as specified and directed.
S & F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.
S & F Modular Socket 6A/16A - 2/3 pin combined 3 module complete all as specified and directed.
S&F Modular bell push 6 A, 1 Module, Complete all as specified and directed
S & F Bell Ding Dong AC,230 Volts, Single pole complete all as specified and directed by E-in-C.
M & L for ceiling rose, PVC/Polycarbonate, insulated body, surface Bakelite 65mm dia three terminals all as specified and as directed.
M&L for sub Main Wiring with 2 run of single core, 4 Sqmm FRLS PVC insulated and unsheathed, multi starndedcopper conductor cable using colour code for phase red and neutral black with and including 4 Sqmm FRLS PVC insulated and unsheathed copper conductor cable in green colour as earth conductor connected to common earth dolly, drawn in and including concealed PVC rigid conduit of suitable size having thickness not less than 1.8mm (ISI marked) with and including all accessories complete and making good to disturbed surface of wall/floor with cement mortar and finishes to match existing surface including taking down of existing unserviceable surface/cocealed sub main wiring any type complete all as specified and directed. Note: Two run of submain wire (phase and neutral), and one run of earth including PVC conduit and accessories will be measured as one run.
M&L for sub Main Wiring with 2 run of single core, 6 Sqmm FRLS PVC insulated and unsheathed, multi starndedcopper conductor cable using colour code for phase red and neutral black with and including 6 Sqmm FRLS PVC insulated and unsheathed copper conductor cable in green colour as earth conductor connected to common earth dolly, drawn in and including concealed PVC rigid conduit of suitable size having thickness not less than 1.8mm (ISI marked) with and including all accessories complete and making good to disturbed surface of wall/floor with cement mortar and finishes to match existing surface including taking down of existing unserviceable surface/cocealed sub main wiring any type complete all as specified and directed. Note: Two run of submain wire (phase and neutral), and one run of earth including PVC conduit and accessories will be measured as one run.
S & F sheet metal enclosure TPN distribution board, double door with IP-43 protection single phase 240 volts 12 way, including suitable size copper bus bar 200 Amp rated and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.
S & F sheet metal enclosure SPN distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar 200 Amp Rated and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.
S&F MCB SP 240V, 50Hz, 10 KA, 'B' curve of rating 6 to 32 Amp all as specified and directed.
S&F MCB SPN 240V, 50Hz, 10 KA, 'B' curve of rating 40-63 Amp all as specified and directed.
M & L sheet metal enclosure with sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 20 amps 240 volts, complete with one single pole MCB of 20 amps complete all as spd and directed. Make:- Hager/ Legrand/ ABB
Supply and fixing 415 Volts, MCCB 4 Pole 100 AMP amp rating current carrying capacity with breaking capacity 16 KA complete with connection testing and commissioning.
S&F in replacement Energy saving, surface mounted, bulk head LED luminaire 10 W with PDC aluminium housing and polycarbonate diffuser with IP 66 protection complete including connecting up with three core twisted flexible copper conductor cable of suitable size.all as specified. Make :- CROMPTON CAT Part No. LBHP-10-CDL
S&F 20W surface / wall mounted batten LED luminair, extruded aluminium housing with PC diffuser and ind electronic driver with high efficiency long life, CRI = 80 (Minimum), PF > 0.95, luminous efficacy > 100 lumens/Watt operating voltage 140V-240V, CCT (K) > 6500, THD < 10% complete including 20W LED tube rod with all accessories internally prewired and including connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and directedories prewired and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete Make of LED Fitting:- CROMPTON DMLN1LT8-16 or Technocommercially equivalent to Philips/ GE.
S&F in replacement mirror light 10 Watt LED 2' length prewired with all accessories including lamp and connected electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor 3core cable of size 0.50Sqmm.
Taking down existing exhaust fan / Geyser for refixing after complete BR repair work and refixing the same complete all as specified and as directed.
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (Earth pit not less than 2.25 metre deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as showin in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust, common salt all around Earth plate upto 150 mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40 mm thick RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregrate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including test on completion. (Note :- The rate quoted include cost of min 7.5 metre earthing wire)
Supply, Laying, jointing and testing LT underground cable, heavy duty, 1100 Volts, 35sqmm, 3.5 core, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection complete all as specified and directed. Make: Havells, Plaza, Indo asian cables, Kalinga.
Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and directed by Engineer-in-charge. Note:-Punned thickness only shall be measured and paid.
Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' laid in trenches flat complete all as specified and directed by Engineer-in-charge.
M/S ASMATULLAH SHAH
Bidder Name
M/S AB AHAD RATHER
M/S ASMATULLAH SHAH
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .