Providing BT road and side drains to left out cross streets of Barathidasan street in V.Manavely Village

Amount

code 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms , lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m -All kinds of soil.

Code 30.7 Supply of Quary rubbish including stacking to department gauge for premeasurement and spreading required thickness as directed by the Engineer-in-charge

code no 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering.- All work upto plinth level -1:2:4 (1 cement:2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Code No. 4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering.- All work upto plinth level -1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Code No. 4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering.- All work upto plinth level -1:5:10 (1 cement:5 coarse sand : 10 graded stone aggregate 40mm nominal size)

Code No. 4.3.1 Centring and shuttering including strutting, propping etc.and removal of form for:Foundations , footings, bases of columns ,

Code No. 10.25.2 Steel work welded in built up sections framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder,railings, brackets,gates and similar works

code No. 11.3.1 Cement concrete flooring 1:2:4 (1 cement :2coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate.

Code No. 13.16.1 6mm cement plaster of mix :Cement mortar 1:3(1 cement : 3 fine sand)

Code No. 2.27C.1 Supplying and filling with gravel(excluding rock) in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers and rolling every 3rd and top most layer with power roller of minimum 8 tonnes capacity including all leads and lift (Payment based on level measurement)

code no 4.91B Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth three wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite Crushable type such as moorum / gravel for screening and gravel for binding to fill up the interstices of coarse aggregate, watering and compacting to the required density - by manual means - Water bound macadam Gr-I with Gravel screening. (As per MoRTH specification, 4th Revision)

CodeNo.4.92C Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth three wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite Crushable type such as moorum / gravel for screening and gravel for binding to fill up the interstices of coarse aggregate, watering and compacting to the required density - by manual means - Water bound macadam Gr-II with Gravel screening. (As per MoRTH specification, 4th Revision)

CodeNo.6.1.MO Cleaning the existing W.B.M. road surfaceincluding removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and/or compressed air to receive bituminous treatment. As per clause no 502.4.2 and 503.3.1 of MOST specification.

CodeNo.6.5F.1.MO Providing and applying tack coat on the prepared surface, heating bitumen in boiler and spraying the bitumen with sprayset fitted on bitumen boiler - on granular base such as WBM and WMM surfaces not bitumen primed. Rate of application 10kg/10sqm.

CodeNo.6.11B.MO Providing and laying open graded premix carpet 20mm thick on prepared surface in a single course as wearing course composed of specified size of stone aggregates premix with a bituminous binder in mini hot mix plant 6 to 10 tonne laying manually and rolling with power roller 8 to 10 tonne but excluding cost of primer/tack coat. As per clause no 509 of MOST specification.

CodeNo.6.17.MO Providing and applying premixed seal coat type `B' comprising of thin application of fine aggregate premix with bitumen binder in mini hot mix plant, carriage manually of mixed material and laying and rolling with power roller 8 to 10 tonne. As per clause no 513 of MOST specification.

M. GUNASEKARAN

DATCHANAMOURTHY