Strengthening work on the Maganpura-Khara Power House road in Saharanpur district.

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.

Providing, laying, spreading material (CTB) on prepared sub base adding cement @ 4% by weight to the spread material manually mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strenght and to form a layer of base.

Providing laying spereading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

Providing and applying tack coat with bitumen VG-10 using pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.

Providing and laying bituminous cocnrete with 100-120 TPH batch type HMP producing and average output of 75 Tonne per hour using crushed aggregates of specified grading premixed with bituminous binder @ 5.40 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver fixisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specificiation clause No. 509 complete in all respects.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. (M-15)

Reinforced Cement Concrete (Grade M20) Using Batching Plant, transit mixer & concrete pump and curing complete, including supply of all materials, labour and T&P etc. required for proper completion of the work as per direction of Engineer Incharges.

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical MoRT&H specifications Ref. No. 13.06 (1600 & 2200)

Brick Masonry Work in Cement Mortar 1:3 in sub structure complete excluding Pointing and Plastering, as per Drawing and Technical Specifications Clause 13.01 (1300 & 2200)