Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-01₹9.4 LAccepted-AOC | L-01 | Accepted-AOC Being lowest | |
| 2 | L-02₹9.5 L+₹7,048.85 (0.75%)Rejected-Finance | L-02 | Rejected-Finance Not being lowest | |
| 3 | L-03₹9.8 L+₹33,660.89 (3.56%)Rejected-Finance | L-03 | Rejected-Finance Not being lowest | |
| 4 | L-04₹9.9 L+₹46,135.64 (4.88%)Rejected-Finance | L-04 | Rejected-Finance Not being lowest | |
| 5 | L-05₹10.1 L+₹59,593.16 (6.30%)Rejected-Finance | L-05 | Rejected-Finance Not being lowest |
Tender Value
₹9.2 L
EMD Value
₹18,400
Closing Date
10 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) Darjeeling
P.O. Jalapahar Dist- Darjeeling (WB) Pin- 734103
REPAIR MAINT OF FLOOR PLASTER WORKS AND MISC BLDG WORKS FOR OFFRS JCO OR MD ACCN AND OTM ACCN AT JALAPAHAR KATAPAHAR AND KURSEONG AREA UNDER AGE I DARJEELING
2022_MES_523783_1
8918/E8
Open Tender
Civil Works
Item Rate
182 days
AGE (I) Darjeeling
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
AGE (I) Darjeeling
₹18,400
Yes
15 Jul 2022
12 May 2022
13 Jun 2022
12 May 2022
10 Jun 2022
27 May 2022
12 May 2022 - 20 May 2022
60 days
Amount
Dismantling boarding of any description, fixed in any position with nails, complete all as specified and as directed.
Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab/Blankets of any thickness, etc. including Cover Fillets of any description, complete all as specified and as directed.
Dismantling Timber Scantlings 40 Sq Cm and Over in Section as in Unframed work, in any position, complete all as specified and as directed
Dismantling Timber Fillet, Rails, Posts, Rafter, Purlin Etc., under 40 Sq Cm in Section as in Unframed work, complete all as specified and as directed
Demolition of Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed.
Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove Dust, debries/ rubbish etc., complete all as specified and as directed.
Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises, complete all as specified and as directed.
Demolition of Brick Work/ Stone masonary built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any description, complete all as specified and as directed.
M&L for 40mm thick second class hardwood Boarding, Planed one side, with butt joints and fixed with nails, as in floors, complete all as specified and as directed.
M&L for 20mm thick 2nd class hardwood boarding work fixed with nails planed one side with butt joint as in Shelves, eave boards, Cupboards, racks, Palmet Box, Skirting etc., complete all as specified and as directed.
M&L 15mm thick 2nd class soft wood boarding planed one side & edges tongued and grooved or rebated with butt joints as in wall panelling and similar work fixed with nails complete all as specified and as directed.
S&F Aluminium snap grid frame work with 4.0mm dia GI hanging wire of suitable length for false ceiling size of grid 605 x 605 mm all as specified and as directed.
S&F 4mm thick non asbestos cement plain building boards, fixed to aluminium/ timber frame work with screws as in ceiling complete all as specified and as directed.
M&L for providing 600x600mm aluminium snap grid framed work for false ceiling, comprising of 600x600x5mm thick plain embossed PVC sheet of density 600kg/cum, used as panel insert in a frame work using powder coated aluminium T-section of sizes 25x25mm, 19gauge or 1mm thick. The aluminium frame work is supported from the ceiling by means of 'J' hook and GI Suspended hanger of 4mm dia of required length to maintain proper level. The aluminium framework is supported on side walls by means of Powder coated aluminium 'L' section of size 25x25mm, 19gauge or 1mm thick, complete all as specified and as directed.
M&L 6mm thick veneered decorative plywood grade 1 (with BWR resin) with decorative face veneers on one faces fixed with nails to timber frame work complete all as specified and as directed.
M&L second class hard Wood as in scantlings, timber fixed work clean swan complete all as specified and as directed.
M&L for second class hardwood plain fillets square, rectangular or triangular in section clean sawn secured with nails or brads exc 6 & n exc 13 sq cm in section, complete all as specified and as directed
All as per Item No. 17 here-in-above, but bullnosed, splayed, chamfered or rounded on one edge or face fixed with screws exc 6 & n exc 13 sq cm in section, complete all as specified and as directed
M&L Brick Work with Fly Ash Bricks, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.
M&L Rendering (Internally) 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Fair, complete all as specified and as directed.
M&L Rendering (Externally) 15mm thick in Cement Mortar 1:4 in two layers on Brick Walls/Concrete Surfaces, 5mm thick top layer mixed with WPC as per Manufactures instruction, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed. NOTE: WPC shall be Measured and Paid as ‘Supply only’ under relevant Item.
Supply only Integral Water Proofing Compound (WPC), conforming to IS-2465:1975 and as approved, complete all as specified and directed.
M&L for Screed Bed or Bedding Layer 20mm thick in Cement Mortar 1:6 for laying Floor Finishes/Tiles, complete all as specified and as directed.
M&L for Rendering or Bedding Layer 10mm thick in Cement Mortar 1:3 on Walls, etc. for fixing Tiles as Skirtings, Dados, etc, complete all as specified and as directed.
M&L for providing non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, in floors etc set and jointed neat cement slurry and pointed in white or coloured cement to match complete all as specified as directed. Note - Screed bed will be measured to paid seperately.
M&L Glazed Ceramic Tiles 450x300x7mm thick in Vertical Surface i.e. Dado, Skirting, etc., Set and Jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, complete all as specified and as directed. NOTE : Screed Bed will be measured and paid separately under appropriate Item.
M&L for preparing newly plastered surfaces of Walls and applying Two Coats of Cement base paint over a coat of alkali-resistant primer, complete all as specified and as directed.
M&L for preparing newly plastered surfaces of Walls and applying Two Coats of Oil Bound Distemper over a coat of Chalk Whitening, complete all as specified and as directed.
M&L for preparation of wood and wood based materials, new or old surface of any description and girth not otherwise described and treated with two coats of creosote oil complete all as specified and as directed.
M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, complete all as specified and as directed.
M&L for applying five coat of melamine polishing to new wooden surfaces including preparation of surfaces as per manufacture's instructions and complete all as specified and as directed.
M&L preparing newly surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed
M&L Cement Concrete 1:3:6, type C-2 (40mm graded aggregate), 75mm thick as in Plinth protection, Floor, Path, etc., laid in alternate bays, finishing Concrete Surfaces Even and Fair, complete all as specified and as directed.
M&L Cement Concrete 1:2:4, type B-1 (20mm graded aggregate), 40mm thick as in Floor, Hard standing etc., finishing Concrete Surfaces Even and Smooth with using Extra Cement, complete all as specified and as directed.
GEETA CONSTRUCTION
TSHERING WANGYAL BHUTIA
Darjeeling Enterprises
KWOK YING CHIU
HIRA SINGH
Damdoo Bhutia
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .