Extension for Swimming Pool and Gym Area at Fort Circuit House Diu

Demolition & Removal Work :- Demolition including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.

Removing and scraping of old deteriorated plaster of any thickness from wall / R.C.C member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift

Excavation and Filling Works :-Providing Material and labour for Excavation of foundation/utilities up to 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff within the site for all lead, all lift/ depth anywhere from the site etc complete as directed by Engineer in charge. for All kind of soil.

Providing Material and labour for Excavation of foundation/utilities up to 1.5 m to 3.0m depth including sorting out and stacking of useful materials and disposing off the excavated stuff within the site for all lead, all lift/ depth anywhere from the site etc complete as directed by Engineer in charge. for All kind of soil.

Providing Material and labour for Excavation of foundation/utilities up to 3.0 m to 5.0m depth including sorting out and stacking of useful materials and disposing off the excavated stuff within the site for all lead, all lift/ depth anywhere from the site etc complete as directed by Engineer in charge. for All kind of soil.

Disposing off the unused excavated earth for all lead and lift/ depth out side the site at non objectionable place as directed by Engineer in charge.

Filling available Excavated earth (excluding rock) in trenches, Plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering.

Providing Material and labour for Filling in plinth with Sand with CBR value higher than 8% under floors or base of foundation including watering ramming, consolidating and dressing etc complete as directed by Engineer in charge.

Providing Material and labour for Filling in foundation, Plinth and plot Filling with Murram (Brought from out side) CBR value higher than 8% in layers of 20cm. thickness including watering, ramming and consolidating etc complete as directed by Engineer in charge.

Providing and filling in Rubble in Foundation, in plinth and for plinth protection, filling, with quarry spalls covering and leveling the surface in layers of 20 cm thickness stone/metals or stone chips, including watering, ramming well and consolidating each layer using minimum 100mm cut size stones.

Dewatering in all sorts of soil and soft murram, hard Murram and boulders, Soft Rock, Hard Rock including removal of surface water, water from foundation, trenches and ground water as necessary to performed construction required by the contract in accordance with the specification.

PCC and RCC works :- Providing material and labour for laying Plain cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- crushed stone aggregates 20 mm nominal size) in Foundation, Plinth, Pavement, Road work including cost of form work, compacting, finishing, curing etc complete for all level, all height/ depth as directed by engineer in charge.

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of form work in (A) Foundation and Plinth

Providing and laying cement concrete 1:2:4 (1- Cement : 2- coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of form work in (A) Foundation and Plinth

Providing Material and labour for laying in position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and machine mixed design controlled cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Foundation, Footings, base of columns, pavement, grade slab, roads and Mass concrete Below plinth & up to plinth Level including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. excluding cost of reinforcement and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Providing Material and labour for laying in position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and machine mixed design controlled cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Columns, Fins, Pillars posts, Rectangular polygon in plan and struts All work up to Plinth level including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. excluding cost of reinforcement and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Providing Material and labour for laying in position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and machine mixed design controlled cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Columns, Fins, Pillars posts, Rectangular polygon in plan and struts All work up to Above Plinth level to Floor Two Level including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. excluding cost of reinforcement and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Providing Material and labour for laying in position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and machine mixed design controlled cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Columns, Fins, Pillars posts, Rectangular polygon in plan and struts All work up to Above Floor Two level to Floor Three Level including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. excluding cost of reinforcement and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Providing Material and labour for laying in position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and machine mixed design controlled cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Beams, Plinth beam, Girders, Lintels and Cantilever all work up to Below plinth & up to plinth Level including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. excluding cost of reinforcement and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Providing Material and labour for laying in position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and machine mixed design controlled cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Beams, Girders, Lintels and Cantilever All work up to Above Plinth level to Floor Two Level including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. excluding cost of reinforcement and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Providing Material and labour for laying in position Ready Mixed M-250 Grade concrete for reinforced cement concrete work Bellow Plinth & up to Plinth Level using cement content as per approved batched and machine mixed design controlled cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Slabs, Landing, Weather Sheds.Balconies and Cantilever including cost of expose/fair finish Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. excluding cost of reinforcement and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Providing Material and labour for laying in position Ready Mixed M-250 Grade concrete for reinforced cement concrete work Above Plinth up to Floor Two Level using cement content as per approved batched and machine mixed design controlled cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Slabs, Landing, Weather Sheds.Balconies and Cantilever including cost of expose/fair finish Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. excluding cost of reinforcement and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Providing Material and labour for laying in position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and machine mixed design controlled cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in RCC Wall work up to Plinth & Above Plinth Level to Floor Three Level (All Floor)including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. excluding cost of reinforcement and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Extra for additional height of propping and centering where the height of propping and centering exceeds 4.0 M between supporting floor to ceiling including temporary brick or stone pillars for supporting as required.(ii) Height more than 5.0 M.and up to 6.0 M.

Providing and Core cutting work in Stone/RCC/Brick structures of maximum 400mm depth up to 150mm Dia with required core-cutting wet drilling, fastener tools, labour and supervision etc complete.

Reinforcement, Steel works & Re-baring :- Supplying, cutting, bending, binding and placing in position TMT Bar Fe 500D reinforcement in all diameter confirming to relevant I.S. standards as per ISS 2502 and IS 1786 including cost of binding with GI wires and placing in position complete up to Plinth to Floor Three Level ( All Floor) (Brands:SAIL, Jindal)

Providing material and labour for Drilling/ Cleaning hole and injecting grouting chemical with the help of dispenser, in to Stone masonry/RCC wall , Column, beam, Slab etc (Any Height , Any floor) (with Hilti RE500 V3 injection system or Fischer FIS EM injection system or Equivalent) as per manufacturer's specification and structural consultant's specification and fixing rebar of the required diameter subsequently up to 20 mm dia. drill hole and 300mm anchoring depth. Fixing methodology shall be followed as per manufacturer’s guidelines. Steel will be paid under relevant item. Manufacture to submit Re bar Depth Calculation based on design loads & other parameters as provided by consultant and in accordance with EOTA-TR-023/029 “guidelines for post installed rebar connections” for approval. Rate shall be inclusive of all material, labour, necessary scaffolding etc complete for all floors, all height as directed by engineer in charge.

Masonry Work :- Providing material and labour for laying White Stone Bela masonry work in superstructure with White Bela Stone of approved quality course in Cement Mortar in Foundation and plinth in Cement Mortar 1:5 (1- Cement : 5 - Fine sand) in any shape and thickness including packing the joints, finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.

Providing material and labour for laying White Stone Bela masonry work in superstructure with White Bela Stone of approved quality course in Cement Mortar in superstructure in Cement Mortar 1:5 (1- Cement : 5 - Fine sand) in any shape and thickness including packing the joints, finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Above Plinth up to Floor Two Level)

Providing material and labour for laying White Stone Bela masonry work in superstructure with White Bela Stone of approved quality course in Cement Mortar in superstructure in Cement Mortar 1:5 (1- Cement : 5 - Fine sand) in any shape and thickness including packing the joints, finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge. (Above Floor Two level up to Floor Three level)

Providing material and labour for White Stone Bela masonry Partition Wall (up to 15cm th. ) work with White Bela Stone of approved quality in Cement mortar 1:4 (1- Cement : 4 - Fine sand ) in Foundation & Plinth and superstructure in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Foundation & Above Plinth up to Floor Two Level)

Providing material and labour for White Stone Bela masonry Partition Wall work (up to 15cm th. ) with White Bela Stone of approved quality in Cement mortar 1:4 (1- Cement : 4 - Fine sand ) in Foundation & Plinth and superstructure in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Above Floor Two level up to Floor Three level)

Providing material and labour with fixing of 12 mm thk.Double Shutter Toughened Glass door with edge polished fixing with first quality patch fitting double action floor springs on each shutter at bottom efficient Dorma Make (Heavy duty) fixed into floor (including cutting for floor and repairing afterwards), with two pairs of 600 mm long 25 mm dia Matt finished SS handles, two pair of concealed shoot bolts 250 mm long and pin type narrow style lock,on Each shutter with all necessary hardware. complete as per the drawing & design or as directed Egg-in charge. including Dorma Make Floor Spring

Providing material and labour with fixing of Roller Blind (Dim out Blinds Hunter Douglas/Mac) construction100% Polyester fabric weight 197 GSM with repeated fabric size:Solid11.5cm/Mesh 7.5cm fabric is fixed on Anodized extruded grooved tube size 40mm O.D, the control unit is made of high strength reinforced plastic with a clutch of wrap spring design and high carbon steel spring design . The control unit and idler should be mounted in in cassette type powder coated Head rail (As per approved sample to the entire satisfaction of Consultant or Engineer-in-Charge)

Providing material and labour with fixing of 60 cm x 60 cm Glossy/ Matt finished Vitrified Tiles 9 to 10mm thk. Flooring (RAK,Qutone, Simpolo, Nexion or equivalent brand) flooring over 20 mm (average) base of cement mortar 1:4 ( 1 cement: 4 coarse sand) on new surface of floor by adhesive material(Polymer Chemical adhesive: Laticrete 325) including finished with flush pointing & cleaning the surface and including filling the joints with Approved Epoxy Grout (Polymer Chemical adhesive: Laticrete 325) in 3-4 mm width and 10 mm Depth including cost of PVC Spacers, Rubbing, Cleaning and finishing the surface etc. complete.

Providing material and labour with fixing of of 60cm x 60 cm Glossy / Matt finished Vitrified Tiles 9 to 10mm thk.Make (RAK,Qutone, Simpolo, Nexion or equivalent brand) of approved shade in skirting, risers of steps and dado on 10 mm thick cement plaster 1:3 (1 Cement : 3 coarse sand) & by adhesive material (Polymer Chemical adhesive: Laticrete 325) including finished with flush pointing and jointed with Approved Epoxy Grout in 3-4 mm width and 10 mm Depth including cost of PVC Spacers, Rubbing, Cleaning etc. complete.

Providing material and labour with fixing of 600mm x 600mm Vitrified Tiles Flooring 8 to 10mm thk tile flooring laid on abed of 20mm thick cement mortar 1:6 (1-cement :6-coarse sand ) on new surface or fixing on Existing Flooring by Adhesive material & finishing with flush pointing and jointed with color cement slurry Match shade with tiles including finished with flush pointing & cleaning the surface etc. complete for light shade

Providing material and labour with Laying of swimming pool tiles 19 mm x 19 mm velvet series piccolo vitrified mosaic tiles in wall and flooring with latcrete epoxy grout in pattern etc. all complete as specified and as directed by the Engineer in- Charge and Architects

Plaster, Painting & Finishing work ,Platform :- Providing material and labour for 10mm thick cement plaster in single coat on Slab ceiling surface for plastering finished level and smooth including curing, scaffolding etc. complete in C:M (1cement : 3 fine sand) and finished with floating coat of neat cement slurry as directions of Engineer-in-charge Complete. Above Plinth to All Floor

Providing material and labour for15mm thick cement plaster in single coat on brick concrete wall surface for plastering finished even and smooth including curing scaffolding etc. complete in C:M 1:4 (1cement : 4 fine sand) and finished with floating coat of neat cement slurry also Fixing of GI mesh at all Horizontal & Vertical junction of RCC Column/ beam & Brick work as directions of Engineer-in-charge Complete. Above Plinth to All Floor

Providing material and labour for15 mm thick water proof cement plaster using water proofing powder 1Kg/1bag of cement for all floors on brick / concrete wall work using water proofing materials in CM 1:3 (1-cement : 3-coasrse sand) including finishing with a floating coat of neat cement slurry etc complete for Above Plinth to All Floor

Providing material and labour for 20 mm thick double coat mala cement plaster on exterior / interior, brick / concrete work for plastering comprising of base coat of 12mm thick cement plaster in cement mortar (1-Cement : 4-Coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1-Cement : 2-Coarse sand) finished with trowel including scaffolding curing etc. complete. (All Floor)

Providing material and labor for 20 mm thick rough finished (Sand Face) cement plaster on walls up to any height consisting of 12mm thick backing coat of CM 1:3 (1-cement : 3-sand) and 8mm thick rough finishing coat of CM 1:1 (1-cement : 1-sand) on exterior brick / concrete work for receiving texture paint's base coat etc. complete. For plastering below & above plinth up to all Floor complete. as directions of Engineer in charge Complete.(All Floor)

Providing throating or plaster drip groove 10 x 10 mm and moulding to RCC Chhaja and horizontal surfaces.

Providing material and labour for fixing G.I. hexagonal chicken mesh of size 16mm x 24mm of 22 gauge at junction of concrete and brick work or between different materials after making "V" grove between two different material surface and filled with rich cement mortar and @ 100mm on each side of surfaces including necessary "U" nails/ screws/ washers with cleats for fixing, overlaps, curing, scaffolding etc complete for all floors/ all levels/ all heights/ all shapes as per direction of Engineer-in-charge.

Providing & Applying 12 to 15 mm thick Plaster of Paris layers on wall plastered surface & surface of required or directed by Engineer-in-charge including hacking finishing smooth, with proper level & handed over a clean & neat condition complete. The finished surface should be smooth and in perfect level so as to avoid un evenness and ready to take on paint. complete the work should be done as per directed by Engineer-in-charge. (All Floor)

Providing material & labour for Ceiling painting (two coats) with plastic Emulsion paint of approved brand and manufacture on un decorated Ceiling surface to give an even shade including With applying Two coats of wall care Putty & two coat of primer thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. as directed by engineer in charge complete.(All Floor) Make: Asian Paint, Dulex, Nerolac, Berger Jotun or equivalent./ Wall Care Putty Birla White.Asian Paints, JK,Berger paint, Nerolac or equivalent

Providing material & labour for Wall painting (two coats) with plastic Emulsion paint of approved brand and manufacture on un decorated wall surface to give an even shade including With applying Two coats of wall care Putty & two coat of primer thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. as directed by engineer in charge complete.(All Floor) Make: Asian Paint, Dulex, Nerolac, Berger Jotun or equivalent./ Wall Care Putty Birla White.Asian Paints, JK,Berger paint, Nerolac or equivalent

Providing Material & labour For Two coat of primer and two coats of Pattern Texture Paint on Exterior Surfaces at all heights of surfaces including cleaning, preparing the surface, applying primer - scraping by sandpaper, scaffolding etc. including - (a) All surface preparation, suitable number of base coats required, primers and suitable finishing to the complete satisfaction of the Engineer in Charge, (b) Scaffolding and all leads and lifts,(c) Proper curing in between the two subsequent coats, (d) Touch ups to the paint after the scaffolding is removed, (e) All measurements for paints to be as per IS-1200. f) Minimum Guarantee of Ten Years Waterproofing and Paint performance for all external paints by manufacturer . Make - Asian Paint Apex Createx, Jotun Jotashield Tex Fine OR Equivalent

Providing Material Labour for Constructing Sandwich Platform (600mm Width) of 18 mm thick Polished Black Granite at top and 30 mm thick Kota stone slab flooring (15mm thick base cement mortar 1:4 ) fitting at bottom with cementing Materials / adhesives including making necessary grooves in walls including all labour material of approved quality incl. full molded round front edge fixed in wall for partition and jointed with Grey cement slurry including rubbing and polishing etc. complete.

Water Proofing Work :- Providing Material Labour & laying of Water proofing treatment in Swimming Pool (Internal Surfaces) by Cleaning the surface area to be treated with high pressure water jet ,removal of loose particles by wire brush, cutting cold joints (floor to wall-horizontal / wall to wall-vertical and construction) junctions by 1”x 1” groove by means of electric breaker and pack it with Non Shrink Mortar(Micro Concrete). & Applying of Acrylic cementation self curing waterproofing system - Brush coat in three layers with Glass Fiber cloth of 10 x 10 mm aperture size in 3-4 mm thickness after proper cleaning of surface (Consumption of Brush coat material i.e. 5 Ltr Liquid + 10 kg. Powder in Pack covers 4 Sq M) etc. Complete as per direction of Engineer-in-charge The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing Material Labour & laying of Water proofing treatment in Swimming Pool (External Surfaces) by Cleaning the surface area to be treated with high pressure water jet ,removal of loose particles by wire brush, & Applying of Acrylic cementation self curing waterproofing system priming coat of T-10 (STP make) on surface & Final Coat Apply 2 coats of Coal tar Epoxy on the Wall surface Complete as per direction of Engineer-in-charge The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and laying water proofing treatment Terrace Area by BRICK BATT LAYING (a). Applying neat cement slurry 2.75 kg/m2 of cement admixed with water proofing compound after cleaning the surface. (b). Laying of bricks bats of 25 to75 mm size in CM 1:5 (1 cement : 5 course sand) admixed with water proofing compound over 20mm thick layer of cement mortar 1:5 to required slop including rounding of junctions of walls and slab with spacing not more than 30mm.(c) After two days of proper curing applying a second coat of cement slurry and cured for another two days. (d) Finishing the surface with 20mm thick cm 1:4 and cured for two days with required levels and slope including rounding of junctions at walls,curing etc.As directed and specified.Water pond should be carried out for a period of Seven days as directed by EIC.cement slurry admixed with approved water proofing compound (FosRoc / BASF / Dr. Fixit).

Providing cement Vata (10 cm X 10 cm size) quarter round in Cement Mortar 1:1 including neat cement finishing, watering etc complete.

Providing and laying Broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out up to surface using white cement including rounding off junctions and extending them up to 15 cm along the wall, clearing with water and oxalic acid etc. as directed.

Interior Furnishing Work :- Providing and Fixing of Full height Fixed Glass Partition.with Wooden Frame as per drawing Partition Made From Burma Teak wood frame work ,frame work shall comprise of 150mm x 75mm thk Burma Teak wood members (Including Top Supporting Frame at RCC ceiling or Beam for Partition framing at Horizontal distance Minimum 1.5 mt & Vertical support as per Drawing with required teak wood Beading with melamine Polish. & fixed 12mm thk Toughened glass Panel with Beading with polish & all necessary hardware.etc.The rate should also include of Applying anti-termite work as per directed . & Applying three or more coats of melamine polish of approved quality and shade to have desired, finish to all exposed surface of teak wood members beading, etc. including preparing of surface by sand papering, applying Melamine Polishing etc.complete The work will have to be done as per the approval of the consultant. (Quantity measured on elevated part)

Providing and fixing Gypsum false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sq m (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45 x15 x 0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffuser, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge Gypsum moisture resistant board. (Cost including For suspended from RCC Ceiling /Roof, light cutting gala & also including Scaffolding & Working Platform for any height)

Providing & fixing Vertical Linear Baffle Ceiling (Metalium Make) made out of Aluminum Extrusion in Aluminum alloy grade 6063. The baffle blade shall be in size of 100x50x3600mm in powder coated to Wood grain finish – Red Oak & Cherry. The baffle blade shall be suspended using Slotted U-profile of 20 x 30mm at on-center spacing 100mm. Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be installation of U-Grid: The U profile to be suspended at every 1200mm on-centre using 6mm threaded rod from the structural soffit using U-profile hanger. U-profile splice to be used to join more than one U profiles of length 3.75M. 1st U-Grid Channel must be no more than 400mm from the perimeter Fixed with End caps. Installation of Baffles: Locate the slot for Baffle Hangers in U Profile section at 1200mm centers. Hangers are inserted into the slot, and then inserted in the provision in the Al baffle. Two baffle hangers are required one on each side of the U-profile to hold the Al baffle in its place. Each Hanger to be secured into position by inserting the Locking Clip. When doing continuous installation, Baffles blades are to be connected at ends with Baffle Joiner, which are inserted into the top and bottom slots of the Baffle closed profile for alignment only. The bottom Joiner to be located first and fastened on one side only. The top Joiner to be fitted then and secured with grub screws on one side. Then the two Baffle sections shall be joined and the top Joiner is screw fastened on the 2nd Baffle profile. End Caps to be located by pushing the End Cap tongues into open Baffle slots. Installation to be carried out by Trained Installation team & Installation should be carried out as per recommended procedure.

Providing and fixing of Pelmets of up to 150mm/200 mm x 150 to 300 mm L shape made of 19 mm thick ply & 1mm thk Laminate as per drawing. Rate to be inclusive of lipping, cutting, wastage, necessary fixtures, nails, adhesives, necessary scaffolding, fixing at all heights and for all floors as per drawing and approved sample etc should also take load of all the all roller blinds.

Providing ,Fixing & Erecting of Reception Table Laminate Finish (Size 1200mm x 600mm x1150mm)Size and shape as per drawing. Table top Made from 25mm th.Marine plywood finished with 1mm th. approved Laminate & 18 mm th.verticals side.finished with Laminate as per Drawing. Table shall have drawer of 100mm wide on top level with apron of 18mm th ply shall be finished withLaminate higher level counter is to be provided (8mm thk.Corian Top or as per drawing ) held in position using 30mm S S pipe as per design including storage unit made using 19 mm ply. All exposed edges to be sealed with Complete as per the drawing and design or as directed by Engineer-in-Charge.

Providing, Supplying and Fixing Full Height Wardrobe Cabinet done as per Drawing shown. Size:- 1500L x 600W x 2200H. The Wardrobe made out from 18mm Marine Plywood with required cutting. The Wardrobe work proper in line, level with Top side Fixing of 18mm Th. Marine Plywood, Bottom and Vertical Side Fixing of 18mm Th. Marine Plywood, Backside Fixing of 0.6mm Thick Plywood with outside Visible Side Fixing of 1mm Thick Approved Shade Laminate and all exposed Surfaces Laminate & in side storage Finished With 1mm thk Laminate As per drawing & Shutter operated on auto closing hinges, 19mm th Marine ply to be providing for self having vertical 100mm wide19mm th band for supporting .All internal Surfaces finished with 1mm thk Laminate, Storage will have individual locking arrangement ,necessary Teak wood beading patti with Melamine or polish, & necessary hardware like SS mat finish handles/ ball catch. Complete as shown in the drg. & Design or as directed by Engineer-in Charge.

Providing and Fixing of Mirror as per Detail drawing. Mirror Fixing with all required Harware like, Button, SS Brackets etc 6mm th Mirror Fixed in Backing of 19mm Plywood as per Drawing

Providing, Supplying of Chlorine Tablets Consisting of TCCA 90 Chlorine Tablets (200 G x 5 Nos = 1 Kg pkt) & Storage in Drum with Closed Cover as per Directed By Engineer in -Charge

Providing, Supplying of Chlorine Granules Consisting of TCCA 90 Chlorine Granules Size 5- 8 Mesh 50kg Drum with Cover & Store as per Directed By Engineer in -Charge.

Providing, Supplying of Swim Ring Consisting of Swim ring Big size Bluewave Make Model No-LB003 as per Directed By Engineer in -Charge.

Gym Equipment :- Providing Supplying of The Aspire Treadmill builds on the Life Fitness heritage of advanced biomechanics to create unparalleled workout experiences. Advanced engineering reduces the mechanical complexity of the treadmill to improve operational efficiency, make maintenance easier, and to provide lasting value. Large LED display 17 to 22 workouts (depending upon base type) Bluetooth® connection to heart rate straps, headphones and mobile devices Wi-Fi, ANT+, and NFC compatibility Connects to Apple Watch® Deck Type - DX3™ Belt- Seigling multi-ply polyester belt Running Surface Width / Length - 22" (55.88 cm) / 60" (152.4 cm) Motor - 4hp (8.0hp Peak) AC motor Speed Range (mph)0.5 - 12 mph (0.8 - 19 km/h) in 0.1 increments Maximum User Weight - 400lbs (181.44 kg) Complete with installation at Gym Area Location directed By Engineer in charge.(Make & Model as per suggestion by compliant Authority.)

Providing Supplying of Upright Lifecycle Bike As per Bellow Specs Cup Holders: 1,Resistance Levels: 25, Handlebars: Racing Handlebars, Dimensions (L x W X H):44 in x 23 in x 54 in (112 cm x 59 cm x 138 cm,Weight:130 lb (59 kg),Max User Weight: 400 lb (182 kg) Power Requirements: Self-powered. Complete with Installation As per directed (Make & Model as per suggestion by compliant Authority.)

Providing Supplying of The Life Fitness Adjustable Decline Bench was designed for performing core and decline exercises. The balanced pivot design allows for effortless transitions between multiple decline positions, as well as a flat and incline setting, allowing for a wide range of workout options and the ability to tailor exercise difficulty to your preferences. Max User Weight: 300 lbs (136 kg) Max Training Weight: 500 lbs (227 kg Back Adjustments: +10°, 0°, -10°, -20°, -30° Weight: 175 lbs (80 kg) Size: 73” x 29” x 41” (185 x 73 x 104 cm) Frame Colour: Standard Colour Upholstery Colour: Standard Colour Complete with Installation As per directed (Make & Model as per suggestion by compliant Authority.)

Providing Supplying of Ramp up Dumbbell Rack (2 layers) BRS8001 "Built with heavy duty steel, this is a perfect storage equipment for home and commercial use. Please Note: Installation available only for Mumbai orders (at an additional cost). If needed, it can be arranged within 72 hours of delivery. Size: 2270*680*798mm (L*W*H) Complete with Installation As per directed (Make & Model as per suggestion by compliant Authority.)

Providing Supplying of Round Urethane Dumbbells are the epitome of durability, utility and aesthetics. You won’t have to worry about scratches after use and the irritating rubbery odor. Manufactured with solid steel heads, surrounded by a thick, shock absorbent and an impact-resistant layer of Urethane, these easy-rolling round dumbbells are recommended for fitness facilities where heavy usage takes place. Complete with Installation As per directed (Make & Model as per suggestion by compliant Authority.) it also include 1) Ramp Up CPU Dumbbell 2.5 Kg 2 Pair (BRS2002) 2) Ramp Up CPU Dumbbell 5.0 Kg 2 Pair (BRS2002) 3) Ramp Up CPU Dumbbell 7.5 Kg 2 Pair (BRS2002) 4) Ramp Up CPU Dumbbell 10.0 Kg 2 Pair (BRS2002) 5) Ramp Up CPU Dumbbell 12.5 Kg 2 Pair (BRS2002) 6) Ramp Up CPU Dumbbell 15.0 Kg 2 Pair (BRS2002) (Total 12 Pair Set)

Providing Supplying of Flat Multipurpose Exercise Bench for Gym Area Made From Heavy Duty Steel frame work With Powder Coating & High-density Foam Padding & Seat Secure Body Firmly When Do Full Body Workout With Exercise.Size : 41’’ x 20’’ x 11’’ or as per directed Frame & Upholstery Colour: Standard Colour(Make & Model as per suggestion by compliant Authority.)

Supply & Installation of Elastic PU Flooring having thickness of 9mm comprising of 7mm layer of SBR mixed with PU binder cast in situ following by 2mm PU Coating. System consist of Primer, SBR being laid using PU binder , PU Sealer and Two layers of PU Colour and line marking as per the international standards. (Make list : KDF, EPI and Stockmeier)

Providing ,Supplying and fixing of Factory made Modular furniture as per below specification including erection at site.4 Door PLU + Locker (Base) : shall be 375mm(W)x450mm(D)x1950mm(H). on units that can be stacked width wise to form bank of lockers having common side panel. Material shall be CRCA 0.6 mm thickness . Construction shall be Rigid Knockdown construction , shelf shall be uniformly distributed load capacity per each shelf level is 35 Kg maximum . Finish shall be epoxy polyester powder coated to the thickness of 50 microns . Handle/Label holder shall be Aesthetically appealing Snap fit ABS plastic handle . Ventilation shall be attractive punched pattern for ventilation .

GRC Work - Providing material , labour& Installation of Automatic Machine cut Glass Reinforced Concrete(GRC) Cercullar Column in Approved Size ,(600 dia x 9.65mt ht) Pattern, Design,Standered thickness of 50-60 mm border on frame & design elements is 30-35mm thick have weight Approximately between 4-5 kg/ Sq ft. GRC should be made from 53 grade white portland cement manufactured by ' JK Cement, or equivalent, Quartz, fine Silica sand, Alkali Resistant Glass fiber manufactured by made in Japan(Nepon) or equivalent, super Plasticizers Manufactured by BASF or equivalent, Polymeres Manufactured by BASF or equivalent. The Material casting should take place in Synthetic Rubber/ FRP mould Manufactured by Reckli or Equivalent (Rate Including MS Pipe Fabrication)

Providing material , labour& Installation of Automatic Machine cut GRC Cornice having compressive strength of 35-55 MPA and Flexural Strength of 6-16 MPA ,Dry density 1.8 to 2.2T/M³ ,Glass (Alkali Resistant 2% -5% as per approved design,& colour White Cement Base/Grey cement Base , Finish Front Side Smooth As per Directed by Architect and Engineer in-Charge including Packing, Transporting, Unloading, fixing at Site etc.complete.(Thickness not less than 25mm thk)150mm x 200mm Top Molding as per Drawing (Rate Including MS Pipe Fabrication)

Providing material , labour& Installation of Automatic Machine cut GRC Cornice having compressive strength of 35-55 MPA and Flexural Strength of 6-16 MPA ,Dry density 1.8 to 2.2T/M³ ,Glass (Alkali Resistant 2% -5% as per approved design,& colour White Cement Base/Grey cement Base , Finish Front Side Smooth As per Directed by Architect and Engineer in-Charge including Packing, Transporting, Unloading, fixing at Site etc.complete.(Thickness not less than 25mm thk) 625mm x 225mm Bottom Molding as per Drawing (Rate Including MS Pipe Fabrication)

Providing and Fixing Scaffolding as working platform for working at height with approved grade of Steel including cutting, fabricating, assembling and removal from site after completion of work etc. complete.

Plumbing & Sanitary Work :- Supply,checking, storing and fixing S. S. sink, single bowl with tap point on wall / counter comprising of Concealed type brackets fixed to wall with adjustable clamp to push against counter rim,40 mm heavy plated fitting without pop-up,with flexible PVC pipe with connector,CP swan neck sink faucet model JAQUAR(ESSCO)-MQT-522AKN Painting brackets with two coats of white enamel paint over one coat of primer,table mounted / wall mounted. Kitchen sink with drain board)(model :Nirali-olympia-bigor equivalent)

Supply, checking, storing and fixing in position European water closet comprising of Wall hung European W.C. MODEL JAQUAR(ESSCO)-ORS-WHT-105951NPP in white colour, on approved type of chairs, CP Flush Cock with wall flange MODEL:DLX-553 as directed,C.P health faucet MODEL:JAQUAR(ESSCO)-ALE-CHR-583 with required length of flexible tube, clamp and bracket for fixing to wall,C.P. brass 2-way bib cock MODEL:JAQUAR(ESSCO)-DLX-512ANKN ,Solid bakelite water closet cover and seat with C.P. hinges and rubber buffers,Fixing W.C. unit with brackets and accessories in position,Necessary pipe connection to PVC / PP / CI soil pipe,Painting bracket with two coats of white enamel paint over a coat of primer.

Supply, checking, storing and fixing Under Counter wash hand basin MODEL:JAQUAR(ESSCO)-ECS-WHT-501 ith ,32 mm heavy plated C.P. waste coupling JAQUAR(ESSCO)-ALE-543HT fitting with pop-up,32 mm heavy plated C.P. bottle trap JAQUAR(ESSCO)-ALE-773ML190X125 with cleaning eye with extension piece and wall flange,Painting brackets with two coats of white enamel paint over one coat of primer,CP Basin Faucet JAQUAR(ESSCO)-STE-107001 with 15 mm C.P. brass heavy grade flexible inlet connection with C.P. nut (minimum length 450 mm) made to measure.

Supply, checking, storing & fixing C.P. brass towel ring MODEL:JAQUAR(ESSCO)-AEC-1121N Round to PVC cleats with C.P. brass screws including cutting and making good the walls wherever required .

Supply, checking, storing & fixing C.P. brass angle valve for basin & Sink MODEL:JAQUAR(ESSCO)-TQT-526N, of approved quality conforming to IS:8931 for a) 15mm Nominal Bore

Supply, checking, storing & fixing C.P. brass Long Body bib cock MODEL:JAQUAR(ESSCO)-TQT-512 of approved quality conforming to IS:8931. a) 15mm Nominal Bore

Providing and fixing PVC SWR Pipe confirming to IS 13592-92 TYPE B and fitting as per IS 14735-99 for SOIL & WASTE water discharge, including all fittings with and with out inspection doors, including supports brackets as per supplier specification and distance, cutting, chases /holes in walls/floors/slab etc. (Pipes to laid in Toilets)(Make:Astral,Ashirvad,Suprime) 75 mm

Providing, laying and jointing in true line and level 110 diaR.Mt. U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diaR.Mt. x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.

Providing and fixing PVC Agri 6Kg/cm2 and fitting for SOIL & WASTE water discharge, including all fittings with and with out inspection doors, including supports brackets as per supplier specification and distance,cutting, chases/holes in walls/flors/slab etc. (Pipes to laid in Toilets)(Make:Astral,Ashirvad,Suprime) 50mm

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls.

Providing and fixing in position Multi Floor Trap/Plain Floor Trap self cleansing design moulded or fabricated with 50 mm water seal conforming to IS:14735-90 including setting the trap in 1:2:4 cement con'crete etc. (Make:Astral,Ashirvad,Finolex) 100mm Outlet

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two R.Mt. C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two R.Mt. C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two R.Mt. C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two R.Mt. C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing, fixing, jointing and testing in position the following U-PVC pressure threaded Pipes as per ASTM D 1785 Schedule 80 and threaded conforming to IS:554. Cut to required lengths including all necessary fittings and specials such as bends, tees, unions, reducers, flanges and plugs etc. The pipes & fittings shall be tested to a pressure of 15 Kg/Sq.cm. Fixing at wall/ ceiling level supported by clamps, fastener, hangers etc. as per specification. Cutting hole in wall / floor slab and making good the same with cement concrete 1:2:4 complete as required. GI heavy class pipe sleeve of larger diameter shall be provided wherever the pipes crossing the walls/floor slab and sealing the sleeves as per consultants requirement. Threading, jointing & making proper connections & as per provided drawings by architect,techincal specification and as directed by the authority EIC.(Water Supply Riser & Main Ring) (make:Astral,Ashirvad & supreme) 65 mm nominal outer dia Pipes ( SCH 40 )

Providing and fixing forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 16 kg/cm2 etc. complete in all respect. 25mm dia

Providing and fixing forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 16 kg/cm2 etc. complete in all respect. 32mm dia

Providing and fixing forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 16 kg/cm2 etc. complete in all respect. 40mm dia

Providing, laying, jointing and testing heavy quality DWC (Double wall Corrugated ) under ground application pipes for Sewer and strom line with Snap-Fit Coupler with Rubber Ring / In-line Socket Molded Coupler / Socket-Spigot Arrangement fittings of SN8 class of approved make laid to required alignment and slope trenches inclusive of excavation in all soil types, bailing or pumping out water from trenches, shoring, whenever necessary testing, refilling, in layers, ramming & consolidation, removing away the surplus earth & spoils, dumping it on site or carting away to lead of 100 meters as directed incl. 150 mm dia

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes /UPVC /DWC Pipes including bed concrete as per standard design b)150 mm dia diameter

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 800mm and 0.9M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1) A type depth 0.90 R.Mt. for 150mm diameter sewer.

(I) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. or Part thereof over item No.24.27 (I) for depth from 0.9M to 1.5M.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line. (more than 10 ton)

Electrical Work :- providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity 6 to 32 Amp. - DP MCB

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity 40 Amp.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity 63 Amp.

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device having 10 KA short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility trip free mechanism operating for rated leakage at nominal ten volt, complete erected including all materials lugs screws etc. completed.[a] 6A / 10A / 16A / 20A / 25A 2 pole single phase Cat. II

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housingICS=100% of ICU only Cat III.

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. and above at 415 V . having normal current rating 250A. with variable thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for MEDIUM VOLTAGE installation to be erected as per IS-2551.

Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for HIGH VOLTAGE installation to be erected as per IS.-2551.

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic enclosure & transparent cover erected as required with necessary connection erected as directed.

Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush / surface mounted double door (IP54) fitted with insulated copper busbar, isolated neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986,IP-54 suitable for 250 AMP TPN MCCB + RCCB as incomer and three phase outgoing as per following .(The DBs should be used of same company of MCB to be used) (D)12 way outgoing

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (c)63 Amp.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(a) 4 core 2.5 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(a-1) 4 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(B) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 4 core 4 Sq. mm / 4 core 2.5 Sq. mm (4 lux and 1 Earthing) (37+(8+1)*5)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 4 core 6 Sq. mm (4 lux and 1 Earthing) (43+(8+1)*5)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 4 core 10 Sq. mm (4 lux and 1 Earthing) (54+(14)*5)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 3 & 1/2 core 25 Sq. mm (3 lux and 1 Earthing) (76+(23)*4)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (B) 3 & 1/2 core 35/50 Sq. mm (3 lux and 1 Earthing) (87+(28)*4)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 3 & 1/2 core 120 Sq. mm (3 lux and 1 Earthing) (163+(52)*4)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (G) 3 & 1/2 core 185 Sq. mm (3 lux and 1 Earthing) (277+(93)*4)

Supplying and erecting approved make GRP Perforated type Cable Tray Material – Corrosion Resistant Polyester Flame Retardant U.V. Stabilized Resin System - Manufactured from Pultruded Sections- Polyester Resin System, Glass Content : 55 – 60 % - - Standard Length : 3000mm- Support Span – 1500mm, Deflection L/200 - Specification NEMA FG1 1993- UV Resistant - Flame Retardant – IS 6746 - Appendix K/UL 94, Very Low Flammability - Specification Followed NEMA FG1 1993 Oxygen Index – Minimum 30% as per ASTM D 2863 - Flame Spread (Extent of Burning) – 20mm as per Standard ASTM D 635 - Tensile Strength – 4000 – 8000 Kg/Cm2 as per Standard ASTM D 638 - Flexural Strength – 2500 – 10000 Kg/Cm2 as per Standard ASTM D 790- Izod Impact Strength – 130 Kg/Cm2 as per Standard ASTM D 256- Compressive Strength – 2500 – 5000 Kg/Cm2 as per Standard ASTM D 695- Barcol Hardness – 50 – 65 (D) Width - 150mm, Pultruded “C” Channel with 30mm Sides 3mm Thickness, Loading 15 Kg./Mtr.

(E) Width - 200mm, Pultruded “C” Channel with 40mm Sides 4mm Thickness, Loading 25 Kg./Mtr.

(F) Width - 300mm, Pultruded “C” Channel with 50mm Sides 4mm Thickness, Loading 30 Kg./Mtr.

Fabrication : Supplying , fabricating and installation of various sizes clamps for cable tray supports using available M.S. sections & rod as per drawings or instructions of engineer in charge or consultant including applying zinc chromate yellow oxide and two to three coats of required enamel paints with anchor fasteners etc.

HEAT / FIRE RESISTANT COATING OF CABLE Supply and application of intumescent based coating on cables/ cable tray using CP 678 firestop cable coating of HILTI make or equivalent. The coating shall have a density in the range of 1.2 to 1.4 Kg/ L. The coating shall be non-toxic, asbestos and halogen free and shall have good mechanical strength. The coating shall comply with IEC 332 part 3 (1992).

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size in (a) with medium class Rigid PVC pipe and accessories Wire : (a) 2 wire 1.5 sq. mm

Additional Wire : Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size in (a) with medium class Rigid PVC pipe and accessories Wire : (b) 2 wire 2.5 sq. mm

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling, complete with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling ,complete with 6A Modular type switches and following type of accessories erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories

Do - As - Above but for 6 A x 5 pin 250 Volt switched socket outlet point at convenient location. ( Plug & Switch can be together or at different location )

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [II] For 6/16A Plug with 2-2.5 sq.mm Cu. Wire (a) with medium class Rigid PVC pipe and accessories

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [III] For 16A Plug with 2-4 sq.mm Cu. Wire (a) with medium class Rigid PVC pipe and accessories

Providing and erecting 1.6 - 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following type of erection.2) For erecting concealed in RCC / Brick wall/slab or Open along with continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the surface to match the wall/ceiling. Supply and laying of 25 mm rigid PVC pipe of 1.6-1.8 mm thickness

Computer : Power Plugs 1 no. universal plug-switch combined + 1 Nos swithc for Below table 2 nos. 6A 5 pin Plug as below Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories Cat. III + Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire (Car.iii) + [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire (Car.iii)

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with following sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size : 4 wire 4 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with following sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size : 4 wire 6 sq. mm

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with remote unit for Speed Control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as required.[ Make shall be approved by Engineer in Charge] 1200MM

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with necessary 24/ O.20, 3 core flexible wire with earthing.

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM [C] 380 mm dia 1400 RPM

Supply,installation, testing and commisioning of Recessed Mounted 18W LED down light with White Aluminum dia cast , powder coated housing, reflector, PMMA Deep Down LG7 Diffuser cover with LED lamp and driver.LUMEN EFFICACY >110lm/w, PF >0.90, THD <20%, CCT 6000K, Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of 50x 70mm LED Profile light with Aluminium die cast construction, with Micro prisamatic diffuser . LED lamp and driver.PF >0.90.THD<20 %, Make : Trilux, Wipro, Philps, Digitech

Supply,installation, testing and commisioning of Mirror Light 10W light with indoor application with All require accessiers and Drivers LUMEN EFFICACY >90lm/W, PF >0.90, THD <20%, CCT 4000K, Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of 20W COB Spot light with indoor application with All require accessiers and Drivers LUMEN EFFICACY >90lm/W, PF >0.90, THD <20%, CCT 4000K, Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of Decorative Hanging Light Cafeteria 70 watt light with indoor application with All require accessiers and Drivers LUMEN EFFICACY >90lm/W, PF >0.90, THD <20%, CCT 4000K, Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of COLUMN WASHER LIGHT 20W light with indoor application with All require accessiers and Drivers LUMEN EFFICACY >90lm/W, PF >0.90, THD <20%, CCT 4000K, Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of BOLLARD 20W light with indoor application with All require accessiers and Drivers LUMEN EFFICACY >90lm/W, PF >0.90, THD <20%, CCT 4000K, Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of 3W SPIKE LIGHT light with indoor application with All require accessiers and Drivers LUMEN EFFICACY >90lm/W, PF >0.90, THD <20%, CCT 4000K, Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of 60WLED Street light with Outdoor application with All require accessiers and Drivers LUMEN EFFICACY >90lm/W, PF >0.90, THD <20%, CCT 4000K, Make : Trilux, Wipro, Philips

Supply of approved make FRP Pole having following specifications: FRP Light Pole made by CNC filament winding machine using thermoset resin polyester/epoxy resin system) having minimum 62% glass content. The pole should be in one piece and tapered round in shape, having smooth finish and should be totally free from corrosion as well as non conductive & shock proof Pole should be provided with FRP Anchor Base and it should be heavy duty, or MS Material duly painted with Epoxy paint.[D] Overall length of 4 Mtr. Average Thickness: 7mm. Top/ Bottom OD Dia A/F 89/145 mm ± 2mm approx. Approx. Weight of Pole 19 kg approx. (Without Base) Anchor Base (Size 250X250 & 12mm th.)

Providing Aluminium arm bracket of having 2 sets of suitable SS304 hardware for fixing the brackets & spread of 1.2 Mtr (Suitable for 89 to 114 mm pole top dia)(A) Single arm bracket

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. (c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in normal soil. Length of Pipe : 3.00 mtrs Back filling Compound :2 nos Bags of 25 Kg.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. (b)For Electrical installation up to 11 KV in normal soil. Length of Pipe : 2.00 mtrs Back filling Compound :1 no. Bag of 25 Kg.

Supplying & erecting of Conventional Lightening arrestor with Test loop and Counter as per IS standard

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. (8) Modem Jack for Computer Open RJ-45 - cat-III

Supplying & erecting push button type telephone instrument having speaker phone Caller ID & speaker phone with one touch memory (min.6 nos.)& 99 memories with display system (a) Single line BEETEL/panasonic or equivalent make

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction : [C] CAT - 6

Supply, Installation, Testing & Commissioning of 5 Megapixel HD Dome Camera, HD1080p,1/2.7" CMOS, 24 pcs LEDs, 20m IR, Outdoor IR Bullet, ICR, 0.1 Lux/F1.2, 12 VDC, Smart IR, DNR, DWDR, IP66, 3.6mm lens, 4 IN 1 OUTPUT

Supply, Installation, Testing & Commissioning of 2 Megapixel HD Dome Camera, HD1080p,1/2.7" CMOS, 24 pcs LEDs, 20m IR, Outdoor IR Bullet, ICR, 0.1 Lux/F1.2, 12 VDC, Smart IR, DNR, DWDR, IP66, 3.6mm lens, 4 IN 1 OUTPUT

Supply, Installation, Testing and Commissioning of 16-Channel Digital Video Recorder recording with 4TB HDD with all require installation and integration with all camera system, 16 Turbo HD input, 16-ch video&1-ch audio input, 2 SATA interface, 1280×720P: 25(P)/30(N) fps/ch, 380 1U caseW/O HDD with all require software

Supply Installation, Testing and Commissioning of 32" Full HD LED monitor with Power Cord complete as required & necessary video cards complete as required (if required). Make - Sony, Samsung, Philips

Supply, Installation, Testing and Commissioning Power Supply for Camera

Supplying & Laying 24U Wall mounted Rack for the CCTV DVR installation with all require power ports fixed wall rack has a tempered glass door and removable locking side panels. Included with this rack is one set of fully adjustable cage-nut style rails and removable top and bottom cable slot panels, allowing easy installation of CAT5 or fiber optic cables.

Supplying & Laying 24 port rack mounted switch for the following specfiication Approved by cUL Listed, CE, EN 60950, FCC Part 15 Class A, TUV, UL Listed 24 10/100/1000Mbps RJ45 ports

Supplying and erecting wall mount speaker with rated power of 30 watt/power tapping 30/15/7.5 watt available,opening angle 180 degree H * 77 degree V ,sound pressure level 88 dB ,frequency response of 70Hz to 20KHz

Supplying & erecting of Amplifier having following specification: Power Output :400W (RMS) (300W Max.) inputs : 6 Misc. & 2 Aux. frequency Response :50-1500HZ I3db Tone Controls :Cut & Boost type LED Meter :5 LED Arrays The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with automatic changeover from AC to Battery operation, duly protected by wrong Battery Polarity connections.Make - JBL, Harman, Yamaha

Supplying & erecting dual channel amplifier ,power handling capacity of 180 watt ,four micro phone inputs with independent level control ,built in FM tuner,with preset memories,USB drive & SD card for MP3 playback ,100v /telephone input with priority and VOX,frequency response-80 Hz to 18k Hz Philips / /distortion less than 1% @ rated power up to 50 units

Supplying & erecting, of 2cx1.5 Sq. mm Cu Flexible Speaker cable

SITC of Digital / PCM / TDM EPABX System having SMT design, system with flexible universal slots. Inbuilt Auto attendant facility, Minimum 15 Nos. conference, Analog extension line, Calling GSM, E&M line, PRI / EI & VOIP program me through Analog telephone digital key from Ethernet, public address cord, shall have unrestricted simultaneous dialing facility, QSIG protocol on PRI, 95 / STD / ISD / Local-Locking, Class of Service, Quick Dial-Single Digit dialing of any two external number, Once only ring device, Boss/Secretary-Do not disturb Facility, Power Down Mode, Hot Line, Hot Outward Dialing, Day Night Mode, Auto Call Back, Barge-in, Call Pick Up & Call Transfer, Call transfer while Ringing with Voice Guide System, (DISA), Caller ID (CLI), CLI Base ECF, CLI Base routing Internet Ready Port, External Music Port, Call Budgeting, Call Most Calculation (ASMDR), DID Direct Inverse Dialing, External Music Input, Fax Homing, Global Directory Printing with following capacities[C] No of Extension 48, No of Junctions 9, 8 Port IP Resource in-built, 4 Port Web base Video Conferencing, No of expandable ports : 128, Operators Console - 01 Compatible : ISDN

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector having IS-11360-1985 or BS 5446 Part I-1977 & Part VII –1985 (VdS approved) or NFPA72 ( UL/ULC/FM approved) with Latest ammendment complete with mounting base complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe having IS or BS (EN 54) (Vds approved) or NFPA 72 (UL/ULC/FM approved) with Latest Amendment complete as required.

Supplying, installation, testing & commissioning of addressable manual call point having IS or BS (EN 54) (Vds approved) or NFPA 72 (UL/ULC/FM approved) with Latest Amendment complete as required.

Supply and fixing of 90 mins Battery back-up Exit Light fixtures with ceiling mount brackets and chain including all required accessories.

Supply, laying, testing and commissioning of twisted pair 2x1.5sq.mm Copper Armored 650V grade shielded XLPE insulated Fire Rate cable

HVAC Work :- Providing and erecting Inverter based approved make Cassette type split air-conditioning unit consisting of condensing unit with fan motor, hermetically sealed scroll/rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by Eco friendly Green gas charging & Internal copper wiring & Remote control ( 3 star and above of current year) with necessary core cutting.(C) for 3 ton capacity- 3Phase.Note :- Premium category:O-General, Mitsubishi electric

Providing and erecting Inverter based approved make Cassette type split air-conditioning unit consisting of condensing unit with fan motor, hermetically sealed scroll/rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by Eco friendly Green gas charging & Internal copper wiring & Remote control ( 3 star and above of current year) with necessary core cutting.(D) for 4 ton capacity- 3Phase.Note :- Premium category:O-General, Mitsubishi electric

Supplying and installing MS angle , powder coated / Painted standard type of wall/floor stand mount for outdoor unit of split AC of following capacity, erected with necessary hardware materials as directed.(B) 35mm*35mm*5mm thick M.S angle suitable for above 2 TR to 4 TR Capacity of ac machine

Supplying and erecting insulated pair of soft copper tubing open or concealed including power and control cable,necessary PVC drain pipes for Split AC machine up to 4 TR capacity

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & square frame.200mm with 1350RPM Cat.II

Fire Fighting :- Providing, laying, testing & commissioning of 25 mm diameter 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Providing, laying, testing & commissioning of 32 mm diameter 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Providing, laying, testing & commissioning of 40 mm diameter 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Providing, laying, testing & commissioning of 50 mm diameter 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Providing, laying, testing & commissioning of 65 mm diameter 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Providing, laying, testing & commissioning of 80 mm diameter 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Providing, laying, testing & commissioning of 100 mm diameter 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required

Providing and fixing 80 mm dia cast iron butterfly valve complete with epoxy coated disc, carbon steel shaft and lever actuator including flanges and nut bolts etc complete as per I.S 13095 of PN16 rating. for isolation

Providing and fixing 100 mm dia cast iron butterfly valve complete with epoxy coated disc, carbon steel shaft and lever actuator including flanges and nut bolts etc complete as per I.S 13095 of PN16 rating. for isolation

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :

Supplying and fixing first-aid 30 meter long Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585. 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

Supplying and fixing first-aid 40 meter long Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585. 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

Supplying and fixing Gun Metal 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required as per approved make.

Supplying and fixing of 2-way fire brigade connection to static tank (Draw out connection) of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler

Upright Sprinkler

Please Enable Macros to View BoQ information