EE/BR/SJTRD/TB-17/2019-20

Amount

Clearing and grubbing of Road land including up rooting rank vegetation grass, bush, shrubs saplings and trees of girth upto 300mm removal of stumps of trees cut earlier and disposal of unseviceable materials & stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal & disposal of top organic soil not exceeding 150mm in thickness.

Construction of embankment with material obtained from borrow pits,Construction of embankment with approved materials obtained from borrow pits with a lift up to 1.5m, transporating to site, spreading, grading to required slope and compacting to meet required of Tables 300.1 and 300.2 with a lead upto 1000m as per technical specification clause .

Construction of sub-grade and earthen shoulders Construction of sub-grade and earthen shoulders with approved materials obtained from borrow pits with all lifts and leads, transporating to site, spreading, grading to required slope and compacting to meet required of Table 300.2 with lead upto 1000m as per technical specification clause.

(A) By mix in Place Method Construction of granular sub-base by Providing well graded material, spreeding in uniform layers with by tractor with grading attachment on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density , complete as per Technical specification cl. 401 .

Water Bound Macadam Providing, laying, spreading and compacting stone aggregate of specific size toWBM specification including spreading in uniform thickness, hand packing rolling with three wheel 80-100kN static roller in stages to proper grade and camber applying and brooming, stone screening/bindingmaterials to fill up the inter slices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause.2) Grading-II (A) By manual Means

3) Grading-III (A) By manual means

Prime Coat ( I) Low porosity Providing and applying primmer coat with bitumin emultion (SS-1) on prepared surcafe of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per technical Clause

Tack coat (II) Providing and applying tack coat with bitumin emultion (CRS-1) using emultion distributor at the rate of 0.25-0.30 Kg/sqm on the prepared dry and hungry bituminius surface cleaned with hydraulic broom as per technical specification clause 503

Providing , laying and rolling of open graded carpet of 20mm thickness composed of 13.20mm to 5.60 mm aggregate either using penetration grade bitumen or emulsion to required line , grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant , laying and rolling with a three wheel 80-100 KN static roller capacity finished to required level and grade to be followed by seal coat of either Type A or Type B or Type C as per technical specification clause 508.2

Seal Coat Providing and laying seal coat using Bitumen Emulsion sealing the voids in a bitumenious surface laid to the specified levels grade and cross fall using type A Type - B , and Type - C as per technical specification clause 510

Providing and fixing of reto- reflectorised cautionary mandatory and informatory sign as per IRC 67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3. fixed over aluminium sheeting 1.5mm thick supported on a mild steel iron post 75mm x 75mm x 6mm firmly to the ground by means of properly designed foundation with MS 15 grade cement concrete 450mm x 450mm x 600mm , 600mm below level as per drawing and technical specification clause 801. ii ) 60cm circuler

iv ) 800mm x 600mm rectangle

Planting of Trees and their Maintenance for one Year Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications. ( As per Detail estimate )

Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.( As per Detail estimate )

BIJIT BRAHMA