82598 ADDITION AND ALTERATION TO BUILDING NO P-5 (DYRING/IRONING, BARBER AND COBBLER SHOP) AT INS ADYAR UNDER AGE(I) NAVY CHENNAI

Amount

SCHEDULE 'A' PART-I [ B/R WORKS]

Taking down chowkhats with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4.0 sqm each complete all as specified and directed.

Taking down Shutters of any description not exc 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Taking down Shutters of any description exc 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Taking down and refixing the same opening of door Shutters of any description exc 1 sqm but not exc 2 Sqm each and including easing and adjusting before fixing of door shutter complete all as specified and directed.

Demolition of Brickwork built in cement motar, stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and Labour for Brickwork with flyash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

All as in item No. 8 but for half brick thick walls built in CM (1:4) complete all as specified and directed.

S & F Aluminium powder coated frame with shutter doors ,Three/ Two track windows and partetions including joining cleat for fixing EPDM rubber/ neoprene gasket required with extruded built up standard sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom etc. complete all as specified and directed. Note : Thickness of powder coating not less than 50 micron. Rate including but rubber beading/neoprene gasket, screws, three/ two track rollers, locking arrangements for windows will not be weighted.

Supply and fix for for Factory made fully glazed i.e glass panels used instead of 5mm thick sheet panels PVC of Louvred Ventiator of 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colourmicron.complete all as specified and directed

S & F for Powder Coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement complete all as specified and directed. Note : Thickness of powder coating not less than 50 micron.

Supply and fix for aluminium wire cloth 0.45mm nomonal dia of wire and 1.40mm average width of aperture and fixed with aluminium wire staples complete all as specified and directed.

Supply and fix in repair aluminium wire cloth 0.45mm nomonal dia of wire and 1.40mm average width of aperture and fixed with aluminium wire staples/ teak wooden beading complete all as specified and directed.

Supply and fix for 3 mm thick sheet glass figured glass, pin head ,obscured or frosted, including teak wood beading for wooden glazing windows in square not exc 0.50 Sqm in each pane complete all as specified and directed.

Supply and fix for plain sheet glass,4 mm thick, ordinary quality and glazing alu windows and fixed with aluminium glazing clips exceeding 0.5sqm in each complete all as specified and as directed

Supply and fix for plain sheet glass, ,5.5mm thick, ordinary quality and glazing doors and fixed with aluminium glazing clips in square exceeding 0.5sqm in each complete all as specified and as directed

M&L for 6mm thick bakilight hard sheet decorative grade 1 (with BWR resin) with decorative face veneers on one side and other side white; and fixed to doors and Partitions etc and fixed with aluminium glazing clips etc complete all as specified and as directed

Supply and fix for 2nd class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified.

Supply and fix for 35 mm thick 2nd class Hard wood rail and style of Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

Supply and fix for 35 mm thick 2nd class hardwood factory made Glazed and skeleton fully and partially door shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified.

Supply and fix for solid PVC door frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and directed

Supply and fix for factory made solid PVC moulded door shutter, 28 to 30mme thick (stiles), with 2,4 or 6 raised panel designed with 4mm thick moulded PVC sheet on front face and 4mm plain colour PVC sheet on back face as per specification and drawing complete all as specified and directed

Supply and fix for 100mm size, Butt hinges, heavy weight, SS, and fixed complete all as specified and directed

Supply and fix for 125 mm size, Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed

Supply and fix aluminium handles cast type anodised for 100 mm complete all as specified and directed

Supply and fix aluminium handles cast type anodised for 150 mm complete all as specified and directed

Supply and fix for aluminium, anodised barrel tower bolts of extruded section and fixed for 150 mm length complete all as specified and directed

Supply and fix for aluminium, anodised barrel tower bolts of extruded section and fixed for 200 mm length complete all as specified and directed

Supply and fix for Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mm complete all as specified and directed

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid and bedded and pointed in any mortar complete all as specified and directed.

Material and labour for 16-18 mm thick machine cut,Granite stone slab (of any type)(table rubbed and polished) in steps,jambs, pillars, windows, cills, cooking plateforms and like in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and making mould on edges & including cutting for the shape for SS Sink and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

All as per item no-32 above but 16-18mm thick on skirting and including 10 mm thick screed bed in CM 1:4 complete all as specified and directed

Material and Labour for machine cut kota stone slab flooring 20 - 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

Material and Labour for machine cut Pre polished kota stone 15-18 mm thick (single peice in raiser of steps), skirting, dado and pillar laid and jointed with grey cement slurry including cutting and mirror polishing over and including 10 mm thick screed bed in CM 1:4 complete all as specified and directed

Material and Labour for 15-17 mm thick of any shade (table rubbed and polished) laid and jointed in flooring strips, step type window cills and jambs etc of green Marble over and including 15mm thick screed bed/ backing coat in CM 1:6 complete all as specified and directed

Material and Labour for Providing & injecting ATT chemical at the point of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate 0.5 liters/holes by drilling 6mm dia holes at a downward angle of 45 degree at 150mm center and sealing the same.complete all as specified and directed.

Material and Labour for Providing & injecting ATT chemical at the point of contact of voids in masonry wall and floor joins or perimeter of rooms using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.Note:- Measurment to be consider only perimeter of wall and depth up 500 mm

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for(reinforcement cut as requried to facilitate) complete all as specified and directed

Material and Labour for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) n less than 0.9mm dia or securing with clips and including welded with new reinforcement to existing reinforcement and grouting of beams/ columns/lintels etc complete all as specified and directed

Material and Labour for reinforced cement concrete (nominal mix) Type B-1 1:2:4 (using 20mm garded stone aggregate) as in as slab suspended slab, chajjas, facia, shalves for cooking plateform , plateform and the like complete all as specified and directed

Material and Labour for formworks to sides and sofits of shelves, cooking plateform and thle like rough finished surface of concrete complete all as specified and directed

Material and Labour for Steel work in tabular/hallow sections of trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed.

Material and Labour for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmentof Fe 410-W (Gde- E- 250)quality- A complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.50mm thick of any colour having tensil strength of 550 Mpa, as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

Material and Labour for Ready Mix Micro concrete of 25 to 40 mm thick consistency of Renderoc S2 or Renderoc RG of FOSROC or equivalent in consistency a batch of 25kg of Renderoc mixed with water n exc 3.50 Ltrs and mixed with 1 kg of polymer acrylic fibers all as per manufacturer's instructions and finished the surfaces even and smooth with 10mm thick rendering in CM 1:4 complete all as specified and directed by Engr-in-Charge including erecting necessary scaffolding (UP to G+5 Story ) Work carriedout through authorized applicator of approved manufacturer only Make:- FOSROC or equivalent as mentioned in list of make as approved by AGE(I) Note:- The following stages (a) to (d) are included of Materials and labour will be carried out .:-

(a) Taking out existing unserviceable plaster loose/unsound weaken cement concrete of any description and in any position from existing surface of RCC roof slab/beam/column/RCC facia /RCC chajja with power driver of pneumatic chisel after cleaning of concrete/plastered particles and Removing corrosion and all loose scales rust etc from the visible reinforcement and cleaning the steel reinforcement properly. (b) Applying one or more coat of NITO ZINC primer of FOSROC or equivalent ZINC primer of CHEMISTIC/WEBAC as approved by AGE(I)on visible reinforcement surface. Several time prior to placing, the concrete substrates should be saturated with clean water

(C) After drying of water to applying bonding agent of modified styrene butadiene emulsion (SBR bonding agent i.e Nito bond SBR Latex or Nito bond EP of FOSROC or equvalent make) in proportion 1 (Nito bond SBR latex): 1 (water): 3 (OP cement) by volume with the brushing etc to bind New CM plaster / Polymer Modified plaster / Concrete / Screed concrete with old surface. (d) Providing fiber jali/ welded wire mesh fixed to existing RCC roof slab/beam/column/RCC facia /RCC chajja as per directed by Engr-in- Charge Make:- FOSROC or equivalent as mentioned in list of make as approved by AGE(I)

S&F for pressure grouting/ injected with cement slurry and admixed with Nitobond SBR latex in loosed RCC concrete surfaces and including drilling of holes not less then 12mm dia and filled with chemical. And after filling sealed with sealing compound etc complete all as specified and directed Note :- Supply only of Nito bond SBR latex and Dry cement measured and paid saperately . Make:- FOSROC or equivalent as mentioned in list of make as approved by AGE(I)

Supply only admixed with Nitobond SBR complete all as specified and directed. Make:- FOSROC or equivalent as mentioned in list of make as approved by AGE(I)

Supply only dry Cement ordinary portland complete all as specified and directed.

Taking down cement Plaster , any description, on brick walls or stone walls,etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Material and Labour for 15mm thick Rendering in two coats of ( 10 mm thick on first coat and 5mm thick in second coat) on fair faces of brick work or concrete surfaces in CM (1:4) using with WPC @ 3% by wt of cement on second coat complete all as specified and directed. ( Note : WPC shall be measured and paid separately)

Supply only Integral water proofing compound complete all as specified.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaes in CM (1:6) and finised even and smooth (without using extra cement) complete all as specified and directed

Material and Labour for 10 mm thick rendering in CM (1:3) on ceiling on soffits and finised even and smooth (without using extra cement) complete all as specified and directed

M&L for preparing newly plastered surfaces by vacuum based sanding machine and applying two coats of distemper oil emulsion over coat of primer on surfaces of walls including 3mm th wall care putty on walls using mechanical tool/auto roller complete all as per manufacturer instruction complete all as specified and directed by Engineer-in-Charge. Note: All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved before carrying out the work from AGE(I). Contractor should submit Auth applicator certificate before execution of work.

M & L complete removal of existing treatment & preparation on walls by vacuum based sanding machine and applying two coat of distemper oil emulsion over a coat of primer on surfaces of walls including 3mm th wall care putty on walls using mechanical tool/auto roller complete all as per manufacturer instruction complete all as specified and directed by Engineer-in-Charge. Note: All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved before carrying out the work from AGE(I). Contractor should submit Auth applicator certificate before execution of work.

Material and Labour for Preparation of new surfaces of wall by vacuum based sanding machine and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. and over 3mm thick exterior birla wall care putty in two layers using mechanical tool/auto roller all as per manufacturer instruction and including necessary scaffoldings upto G+4 etc etc complete all as specified and directed. Note: All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved before carrying out the work from AGE(I). Contractor should submit Auth applicator certificate before execution of work.

Material and Labour for complete removal of existing treatment on walls including washing down, rubbing down by vacuum based sanding machine and and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. and over 3mm thick exterior birla wall care putty in two layers using mechanical tool/auto roller all as per manufacturer instruction and including necessary scaffoldings upto G+4 etc etc complete all as specified and directed. Note: All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved before carrying out the work from AGE(I). Contractor should submit Auth applicator certificate before execution of work.

Material and Labour for Preparation new plastered surfaces plastered and applying three coat of white wash on ceiling complete all as specified and directed.

Material and Labour for Preparation Old decorated surfaces and applying two coat of white wash on ceiling complete all as specified and directed.

Material and Labour for Preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zink primer complete all as specified and as directed.

Material and Labour for Preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and Labour for Preparation of old wooden painted surfaces of any description over 10 cm width or girth not otherwise described and applying one coats of Synthetic enamel paint complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

Material and Labour for non- skid mat finish ceramic coloured tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6.complete all as specified and directed

Material and Labour for glazed ceramic coloured design tiles/ wall cladding tiles 450x300mm x 7mm /600x150x10mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat of CM 1:4 10 mm thick etc complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.complete all as specified and directed.

Material and Labour for Non skid ceramic tiles 10 mm thick (square/ rectangular) area of each tile exc. 0.36 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured of approved shade , cement to match ncluding 15 mm thick screed bed in CM 1:6.complete all as specified and directed

All as above item No- 68 but as in skirting/ dado including backing coat of CM 1:4 10 mm thick etc complete all as specified and directed.

Taking up & down steel tubing bore of pipe 15 mm connections, including cleaning and removal to store complete all as specified and directed.

As in item No. 70 but for 20 mm dia complete all as specified and directed.

As in item No. 70 but for 25 mm dia complete all as specified and directed.

S & F 20 mm outer dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and composite pressure pipes including all Crimp type internal sealing Planstic metal Composite fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.) and hooks (in case of concealed pipe work)/ clamps (in case of exposed pipe work) etc complete all as specified. having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

All as item No. 73 but for 25 mm outside dia complete all as specified and directed.

All as item No. 73 but for 32 mm outside dia complete all as specified and directed.

M & L Cutting chases, pinning in. making good to facings for inserting galvalume sheet into the e brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good to the existing surface, cutting not exc 10 cm girthcomplete all as specified and directed.

Supply and fix 20mm outside dia PPR Gate valves (brass insert) as per requirement of site fixed to PPR pipes complete all as specified and directed.

Supply and fix 25mm outside dia PPR Gate valves (brass insert) as per requirement of site fixed to PPR pipes complete all as specified and directed.

Supply and fix 32mm outside dia PPR Gate valves (brass insert) as per requirement of site fixed to PPR pipes complete all as specified and directed.

Supply and fix in repairs EWC Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F vitreous china squating pan "Orissa" patern size 580 x 440mm white with 'P' or 'S' trap front or back inlet with integral foot rest (excluding flushing cistern and flush pipe), squating pan including trap set and concretingconnection to trap and flushing pipe, anit syphonic pipe etc complete incl making good to floor complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair of low level flushing cystern 10 ltrs capacity body moulded from virgin quality high impact poly propoliyone and functional parts moulded from engneelicy grade ABS nylon and nylon glan complete incl brackets and flush pipe of reqd size and 15mm bore 450mm long PVC connection all as directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Supply and fix for PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed..

Supply and fix in repairs CP Angle/ stop valve15mm dia of chromium plated fancy type any colour high pressure screwed for iron pipe and fixed.complete all as specified and directed.

Supply and fix in repairs Fancy type CP stop valve 15mm dia cast copper alloy, chromium plated fency type with long shank and cup (concealed type) screwed down high pressure with half turn type knob/capstan heads, screwed both end for iron pipe or for unions and fixed.complete all as specified and directed

Supply and fix in repairs 15mm bore dia chromium plated fancy type Bib taps, with knob/ capstan head of fancy type with long shank, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fix in repairs Wash basins, vitreous china (flat back or angle back type) of 550x400mm, including 32mm waste coupling , cutting for and pinning in ends of brackets or erecting stand inclusive of waste pipe.complete all as specified and directed.

Supply and fix pillar taps, chromium plated fancy type, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe 15mm fixed complete all as specified and directed.

Supply and fix in repairs tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges made of brass chromium plated complete all as specified and directed.

Supply and fix Fibre glass shelf assmbly and approved complete all as specified and directed.by Engineer-in-Charge

Supply and fix Gratings round or square with or without waste hole of PTMT or chromium plated 125mm size complete all as specified and directed.

Supply and fix in repair SS Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed

Supply and fix in repair 125 mm dia Fancy type CP shawer rose all as specified and as directed by Engineer-in-Charge. complete all as specified and directed .

Supply and fix for PVC waste pipe of 32 mm dia for sink and WHB complete all as specified and directed

Supply and fix for 50mm dia bore pipe low density LDPE fixed to wall, ceiling or in floors etc complete all as specified and directed.

Supply and fix in repair PVC pipe 75mm dia single socketed in any length with rubber joints fixed to walls with Stack clamps out of 50 mm by 5 mm flat iron and 6mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roofcomplete all as specified and directed.

Supply and fix in repair PVC (SWR) floor trap, 75mm dia plainwith grating including jointing with solvent cement complete all as specified and directed.

Supply and fix for 75mm PVC (SWR) bends any radius bore of dia with access door complete all as specified and directed.

Supply and fix for 75mm PVC (SWR) bends any radius bore of dia complete all as specified and directed.

M & L for applying 2 coats of water proofing dampshield 2K or home shield damp stop on affected dampness areas and work carried out through manufacturer complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover filets Complete all as specified and as directed.

S&F Hangers 6 mm dia G.I(upto 1200 mm length) adjusting level fixed to roof slabs by means ofceiling cleats made out of G.I) flats 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and directed.

S&F Anodised aluminum snap grid frame work as required grid (size of grid 605x605 mm) ceiling all as speciifed.

M&L for 6 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws for fixing in 600 mm x 600mm grid complete all as specified and directed. Note:- Frame work for ceiling shall be measured and paid separately.

Supply and fix for 18/19 mm thick marine plywood fixed with nails/ screws to frame works as in cabinets cupboards with SS angles cleats etc complete all as specified and as directed.

Supply and fix for 6 mm thick marine plywood fixed with nails/ screws to frame works as in cabinets cupboards with SS angles cleats etc complete all as specified and as directed.

Supply and fix for white laminates of 0.9mm thick glossy finish colour and pattern as approved adhesive complete all as specified and directed

Supply and fix for decorative laminates of 1mm thick glossy finish, colour and pattern as approved adhesive complete all as specified and directed

Supply and fix for CP decorative type Brass handles, cast type, polished bright handles 75mm long fixed to plywood or frame complete all as specified and directed

Supply and fix for cupboard knob Brass knobs 35-40mm dia fixed with screwed and washer of mild steel complete all as specified and directed

Supply and fix for magnetic and connected plate to shutter and frame as per sample complete all as specified and directed

Supply and fix for telescopic channel of size 450mm to 560mm of load per 45 kg/cmsq complete all as specified and directed.

Supply and fix for 80mm Auto SS hinges of crank 0 degree to 90degree, fixed with screws to plywood or frame work as per sample approved by EIC complete all as specified and directed

Supply and fix rotational moulded polyethylene water storage tank of 2000 ltrs capacity thriple (cylindrical verftical with closed top) including dismantling of existing tank including all fittings i.e tank nipple, of 20/25mm dia Ball brass valves, high pressure, with polythene float and flynut etc hoisted and fixed in position complete all as specified and directed.

Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically proided and including removing of PCC Tiles and Existing roof treatment etc complete all as specified and as directed.

M&L for Removal of finishing material e.g. cement plastering,existing damaged APP membrane, Clay tiles, etc to expose the concrete screed / BBC-IPS surface. Thorough cleaning work, removal of loose screed, repairing the damaged portions and filling any minor potholes with polymer modified mortar using Fosroc Nitobond SBR mixed with cement and quartz sand in the ratio of 2.5 litres per bag of cement complete all as specified and directed.

M&L for Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.

M & L for Providing, cement concrete in roof 1:2:4 type B-0 (using 12.50 mm graded aggregate) thickness as specified to bring uniform slope in floors/ roof slab complete all as specified and directed.

Material and Labour for 10mm thick rendering on roof top surfaces in CM 1:3 using with integral waterproofing compound Conplast WL Xtra @ 200ml per bag of cement. Finishing the even and smooth surface etc complete all as specified and directed. Note :- Integral waterproofing compound Conplast WL will be measured paid sepatarely.

Supply only Integral liquid waterproofing compound complete all as specified and directed.

M&L forAPP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric with mineral finish (wt. not less than 150 gms/sqm) land on primed surface laid over roof surface with 100 mm over lap and including vertical surfaces upto required height and tucking into grooves and sealing complete with thermofusion, torch application over a tack coat of hot bitumen 85/25 @1.2kg/sqm over compitable primer at 0.40 ltr/sqm after fixing of APP membrane and etc all as per instructed manufacturer instructions and work to be carried Authorized applicator complete all as specified and directed.

Material and Labour for Cement concrete tiles with grey cement and pigment 25cm x 25cm x 20mm thick, m a c h i n e pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished ncluding 15 mm thick screed bed in CM 1:4.laid on roof complete all as specified and directed

Material and labour for 50mm thick precast cement concrete louvres and jallies 1:2:4 type B-0 12.5mm aggregate , (measured solid), set in CM 1:4 including all mouldings but excluding frame complete all as specified and directed.

Material and Labour for 75mm thick PCC (1:2:4) type B-1 (20 mm graded aggregate) as in plinth protection and finshing the even and fair with out using extra cement etc and including cuting of construction joints every 2.5 mtr and filled with sealing compound grade B etc complete all as specified and directed.

Removal of building materials/debris from 1.5mtr to a distance of out side of 5.0 KM etc complete all as specified and directed.

SCHEDULE 'A' PART-II [ E/M WORKS]

Taking down old/existing DB/main switches of any size and making good distrubed surface of wall/floor etc complete by disconnecting all as specified and directed.

Taking down old sub main wiring any type/size including making good disturbed surface all as specified and directed.

Material and labour for sub main wiring (concealed) complete with five single core 6 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 25 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 6 Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 6 run of 6 sqmm & one run of PVC conduit shall be measured as single unit

Material and labour for sub main wiring (concealed) complete with two single core 4 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 4 Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 3 run of 4 sqmm & one run of PVC conduit shall be measured as single unit

Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and as directed.

Material and labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed.

(a) One light point controlled by one switch

(b) One fan point controlled by one switch

(c) One exhaust fan point controlled by one switch

(d) One bell/ buzzer controlled by one push switch

(e) One switch socket outlet modular type 3 pin 6 amp on same board.

(f) One light point controlled by two way switch

All as per item No 134 above but 1.5 sq mm cable size with 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 Amps on independent board all as specified and as directed.

All as per item No 134 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board all as specified and as directed.

Supply and Fix Switch modular type, single pole one way 6 Amps complete all as specified and as directed.

S & F 0-4 step, one module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed.

S & F bell push switch, modular type, 6 Amps, 1 module, 240 volts all as specified and as directed .

Supply and fixing calling bell Ding Dong type , AC, single pole one way 240 volts all as specified and as directed .

S & F socket modular type 6 Amps,240 volts all as specified and as directed.

S & F switch modular type single pole two way 6 amps 240 volts, all as specified and as directed.

M & L for ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed.

S & F switch modular type 16 Amps, 240 volts all as specified and as directed.

S & F socket modular type 16 Amps, 3 pin combine, 2 module,240 volts all as specified and as directed.

S & F Lamp Holder, PVC/Polycarbonate type with cord gird cap all as specified and as directed.

S & F for Modular white cover plate with frame,1 or 2 Module complete all as specified and as directed by Eng-in-Charge.

S & F for Modular white cover plate with frame,3 Module complete all as specified and as directed by Eng-in-Charge.

S & F for Modular white cover plate with frame,6 Module complete all as specified and as directed by Eng-in-Charge.

S & F for Modular white cover plate with frame,8 Module complete all as specified and as directed by Eng-in-Charge.

S & F for Modular Metal flush box,1 or 2 Module complete all as specified and as directed by Eng-in-Charge.

S & F for Modular Metal flush box,3 Module complete all as specified and as directed by Eng-in-Charge.

S & F for Modular Metal flush box,6 Module complete all as specified and as directed by Eng-in-Charge.

S & F for Modular Metal flush box,8 Module complete all as specified and as directed by Eng-in-Charge.

M & L for single pole and neutral (SPN) sheet metal enclosure with a two pin and earth plug and socket complet with one single pole MCB 240 V, 20/32 amp complete all as specified and as directed by the Engineer-in-Charge.

Supply and Fix wall mounted LED batten with decorative end cap of capacity 4feet 20W or nearest higher wattage ,2500 lm ,6500 K suitable for Surface, Wall & Conduit mounting complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and lamp complete all as specified and directed internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and directed.

Supply and fix LED light fitting 2 feet,10 W or nearest higher wattage,230v,suitable for Surface, Wall & Conduit mounting, with integrated LED driver, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and as directed.

Supply and fix in repair recessed mounting 2 ft x 2 ft LED luminaries 35/36W or nearest higher wattage 6500 K with driver suitable for amtrong/grid ceiling with glare free light LED etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

S & F sheet metal enclosures for DB's for incorporating MCBs, VTPN, 8 way, IP-43 with metal double door with 200 amps rated busbar, 415 volts, as per IS-8623 including taking down the old unserviceable TPN DB, all as specified and as directed.

S & F MCCB TPN, 100 Amps, breaking capacity 16 KA, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed by Eng-in-Charge.

S & F sheet metal enclosures for DB's for incorporating MCBs, SPN, 4 way, IP-43 with metal double door with 200 amps rated busbar, as per IS-8623, all as specified and as directed.

S & F MCB SPN, 40 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.complete all as specified and as directed by Eng-in-Charge.

S & F MCB TP, 25 to 63 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.complete all as specified and as directed by Eng-in-Charge.

S & F sheet metal enclosures for DB's for incorporating MCBs, TPN, 4 way, IP-43 with metal double door with 200 amps rated busbar, 415v as per IS-8623, all as specified and as directed.

S & F MCB TPN, 63 Amps, breaking capacity 10 KA 'B' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.complete all as specified and as directed by Eng-in-Charge.

S & F MCB SP 10-32 Amps, breaking capacity 10 KA 'B' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed by Eng-in-Charge.

M & L for earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to 4 mm GI wire as earthing lead by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No.3 in SSR part 1 connected to earthing test point,including 20 mm GI pipe (Medium grade) for watering and 15 mm GI pipe (Medium grade) for protection of earth wire and etc.. including testing on completion ,PCC chambers in PCC1:3:6 type C1, RCC M25 type cover slab 50mm thick with 8mm dia TMT HCR/CRS steel bars at 140mm C/C both way and lifting handle GI funnel & wiremesh ,funnel,lugs and charcoal,salt etc all as applicable complete all as specified and as directed by the Engineer-in-Charge.

M & L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire all as specified and as directed.

Taking down ceiling fan dismantling blades and removing fan and blades including repair, servicing, rewinding and replacement of spare parts including painting of ceiling fan , electric connection and testing complete all as specified and directed.

Taking down exhaust fan dismantling blades and removing fan and blades including repair, servicing, rewinding and replacement of spare parts including painting of exhaust fan , electric connection and testing complete all as specified and directed.

S & F LED Bulb 9 watts complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.

Supply and laying LT UG XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sq. mm,3.5 core and connecting up to the electrical system with suitable size of aluminium lugs complete all as specified and directed.

Excavation in trenches in Soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of cables/pole and getting out of excavated material complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the pipes have been laid and tested complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed.

Supply and fixing High density poythelyne (HDPE) pipes PN 10 of pressure rating 6kgf/ sq/ m of size 50 mm for cable protection laid in trenches complete all as specified and directed

Supply and laying 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches of size 63 mm complete all as specified and as directed

Supply and laying 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN16) stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches of size 50 mm complete all as specified and as directed

Supply and fix PP-R Gate valves(Brass insert) for PPR pipes of size 63 mm complete all as specified and directed

Supply and fix PP-R Gate valves(Brass insert) for PPR pipes of size 50 mm complete all as specified and directed

Banyan Engineers and Contractors

D Subramani & Sons

BKR Enterprises