Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.9 LAccepted-AOC 1853 DARSHAN SINGH BUILDING MASTANA CHOWK RANJHI JABALPUR MP | JABALPUR | JABALPUR | MADHYA PRADESH | 482001 | L1 | Accepted-AOC Lowest amount quoted | |
| 2 | L2₹18.9 L+₹2.4 L (14.8%)Rejected-Finance G 124 FLAT NO 4 DILSHAD COLONY DELHI 110095 | SHAHDARA | DELHI | 110095 | L2 | Rejected-Finance Highest amount quoted |
Tender Value
Refer Docs
EMD Value
₹43,000
Closing Date
17 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Dhiraj Kumar, IDSE, EE
Garrison Engineer (East), Near COD Estate, Ranjhi, Jabalpur (MP)-482011
As per BOQ
2022_MES_538204_1
8463/E8
Open Tender
Civil Works
Item Rate
240 days
Garrison Engineer (East) Jabalpur
E a(i)
9 documents required · 9 mandatory
₹500
Garrison Engineer (East) Jabalpur
₹43,000
Yes
29 Sept 2022
20 Jul 2022
19 Aug 2022
20 Jul 2022
17 Aug 2022
3 Aug 2022
20 Jul 2022 - 27 Jul 2022
Amount
Dismantling floor, hearth or wall tiling in-cluding cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.
Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3, Earthwork) to a distance of 100m or under, beyond the ead included in the rates, including loading, unloading and stacking at the destination.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceedeing 0.11 sqm but n.exc 0.18 sqm, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6).
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38sqm, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6).
Material and labour for Glazed ceramic tiles of size 350 x 250 x 7mm/ 450 x 300 x 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 all as specified.
S&F light shade Vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:4).
M&L for ENDURA out door tiles 30 cm x 30 cm x 10 mm thick rubberised mould set, jointed and pointed in neat cement slurry as in floors etc . (Make-H & R Johnson, Brand-Endura designer digital series) & Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying ceramic tiles/granite floor finishes.
M&L for ENDURA out door tiles 60 cm x 60 cm x 10 mm thick rubberised mould set, jointed and pointed in neat cement slurry as in floors etc . (Make-H & R Johnson, Brand-Endura designer digital series) & Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying ceramic tiles/granite floor finishes.
M & L Granite (Black/Ruby Red ) work (table rubbed and polished) 20 mm thick in cooking platforms bedded and jointed with grey cement slurry and pointed to match the shade of granite stone including grinding and polishing types including screed bed 15 mm thick in CM 1:6.
M& L Machine cut kota stone slab flooring 18-20 mm thick in riser of steps skirting dado in pillar with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & 20 mm thick CM 1:6 screed bed complete.
M& L Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
M&L for rounding to edges of granite stone slabs one edge, such as in cooking platform, and other similar situations all as specified and as directed.
Machine cut Cudapph stone slab on cooking platform/shelf 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
M&L for colour rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with white cement and pigments complete.
M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
Moorum/red bajri, filling in floors or pavings, laid inlayers n exc any thickness spread, levelled and rammed including watering.
M&L for Machine pressed precast cement concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade.
M&L for Machine pressed precast cement concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade.
M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishes 25 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishes 40 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed. Note- Glass dividing strips shall be measured & paid separately as supply only.
M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishes 50 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed. Note- Glass dividing strips shall be measured & paid separately as supply only.
M&L for PCC 1:3:6 type C-1 using 40 mm graded stone aggregate as in floor finishes 75 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in floor finishes 100 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed.
M&L 75 mm thick PCC 1:4:8 type D2 as in floors as sub base using extra cement in patches all as specified and directed by Engr-in-Charge.
M&L100 mm thick PCC 1:4:8 type type D2 as in floors as sub base in patches all as specified and directed by Engr-in-Charge.
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M&L Brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L Brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
M&L FLY ASH Brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
M&L FLY ASH Brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
Taking down cement plaster and grit plaster any description on brick or stone walls,ceiling etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for rendering on fair faces of brick work or concrete surface of wall 10mm thick in CM 1:6 and to be finished even and smooth without using extra cement complete all as specified and directed.
M&L Washed stone grit plaster on exterior wall in two layer under 12 mm cement plaster 1:4(1 cement : 4 coarse ) furrowing the under layer with scratching tool applying cement slurry on the layer @ 3 kg of cement per square metre,top layer 15 mm cement plaster 1:1/2:2(1 cement:1/2 coarse sand:2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing ,the top layer with brushes and water expose the stone chippings complete all as specified.
M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4and to be finished even and smooth without using extra cement complete all as specified and directed.
S&F 20 mm size of wire mesh netting of stainless stell wire 1.40 mmdia fixed with tinned tack of stainless steel wire staples all as specified and directed by Engr-in-Charge.
M&L 10mm thick plaster in CM 1:3 finished even & smooth w/o using extra cement in patches all as specified and directed by Engr-in-Charge.
M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.
M&L for preparation of new decorated surfaces of walls and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.
M&L two coats of synthetic enamel painting over a coat of pink primer including preparation of new wooden surfacesof any description over 10 cm width or girth.
M&L for painting to new steel surfaces of any description, over 10cm width or girth with two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.
M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old decorated surfaces of wall and applying two coat pidilite product Dr Fixit Rain coat over one coat of primer seal complete as specified and directed.
M&L of old surface roof /terrace /ACC sheets/Manglore pattern exposed up to mother surface filled all cracks than applying three coat pidilite product Dr Fixit new over one coat primer seal complete as specified and directed.
M&L of old surface wall exposed up to mother surface filled all cracks than applying three coat pidilite product Dr fixit heat shield over one coat of primer seal complete in all respect as specified as directed.
M&L Polysulpide two material mix (rasin+hardner) appying harizontel and vertical surface surface (using gun for applying for filling ) crack filling and before appyling material must clean dust free and making V Groove complete as specified as directed.
Preparation of new decorated surfaces of walls and applying two coat of distempering with acrylic washable distemper oil emulsion white or tinted complete all as specified and directed.
Preparation of new plastered or un-plastered surface and applyingtwo coat of cement base paint on walls complete all as specified and directed.
M&L for preparation of old decorated surfaces of ceiling and apply three coat of white wash complete all as specified and directed.
Preparation of old decorated surfaces of ceiling and applying one coat of plastic emulsion paint complete all as specified and directed.
Supply only Integral waterproofing compound completed all as specication as direction (ISI Mark).
Petty repairs to leaking water in bib taps, pillar taps stop cock, angle valve, PVC connection waste pipes, float valves, concealed stop cock, GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed by Engr-in-Charge.
Petty reapirs to high / low level flusing cistern by adjusting the float valve, leakage PVC connection PVC / GI bend incl replacing of rubber washer cheek uts plunges etc for any type of flush complete all as specified and directed by Engr-in-Charge.
S&F in repair 15mm bore bib tap chorime plate alloy with crutch or butterfly handels screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-Charge.
S&F in repair 15mm bore Swan Tap Type Pillar Cock Single Tappillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed Engr-in-Charge.
S&F in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed by Engr-in-Charge.
S&F in repair 15mm bore PVC bib taps all as specified and directed by Engr-in-Charge.
S&F in repair 15mm bore pillar taps chorime plate alloy fancy type chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed Engr-in-Charge.
S&F in repair chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-Charge.
S & F in repair Brass CP bath Mixer (2/3 hole) for mixing hot & Cold water arrangement, long shank suitable 15mm bore of pipe of approved quality screwed down for iron pipe and fixed.
S&F in repair 20 mm bore stop valves chorime plate alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union all as specified and directed by Engr-in-Charge.
S&F in repair 15mm bore PVC stop valves all as specified and directed by Engr-in-Charge.
S&F in repair gun globe or gate valve for 25mm bore pipe with iron wheel head, screwed both ends for iron pipe all as specified and directed by Engr-in-charge.
All as per Srl item No 65 here-in-before but suitable for 20mm bore pipe all as specified and directed by Engr-in-Charge.
S&F in repair gun metal half turn flush cock for 32mm bore pipe with iron wheel head, screwed both ends for iron pipes all as specified and directed by Engr-in-Charge.
S&F in repair 15mm bore conciusive push button type self closing tap of cast copper alloy chromium plated screwed iron pipes all as specified and directed by Engr-in-Charge.
S&F in repair self closing tap 15mm bore lift type of cast iron or malleable cast iron chromium plated screwed for pipes all as specified and directed by Engr-in-charge.
S&F in repair PVC ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20 mm bore pipes all as specified and directed by Engr-in-charge.
All as per srl item No 70 here-in-before but 25mm bore pipe all as specified and directed by Engr-in-charge.
S&F PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed by Engr-in-charge. Make:- Symet/ Prayag/Parryware
All as per srl item No 72 here-in-before but length 600mm all as specified and directed by Engr-in-charge.
S&F in repair 125 mm dia Brass chromium plated shower rose fancy type fixed to 15mm bore pipe all as specified and directed by Engr-in-charge.
S&F in repair waste fitting brass chromium plated 32mm dia for wash hand basin all as specified and directed by Engr-in-charge. Make:- ZIM / Parko/Prayag
All as per item No- 74 above but 40mm dia for sinks all as specified and directed by Engr-in-charge.
S&F in repair waste fitting suitable for stainless steel kitchen sink complete all as specified and directed by Engr-in-charge.
S&F in repair PVC low level flushing cistern complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-charge.
S&F in repair 125mm/ 150mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6 , all as specified and directed by Engr-in-charge.
S&F in repair 127 x127 Crokroch Trap chromium plated grating Make Prayag Cat FT-24 fixed on floor trap / nahni trap in Cement mortar 1:6 , all as specified and directed by Engr-in-charge.
S&F in repair 127 x127 Crokroch Trap chromium plated grating Make Prayag Cat FT-28 fixed on floor trap / nahni trap in Cement mortar 1:6 , all as specified and directed by Engr-in-charge.
S&F in repair brass chromium plated bottle trap 32mm bore for wash hand basin with inlet & outlet screwed for pipes or connection incl necessary packing union and cap complete all as specified and directed by Engr-in-charge.
S&F in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) withcast iron trap portion to match with the existing surface of floor all as specified and directed by Engr-in-charge
M&L Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern, flush pipe & Seat and cover for padestal complete all as specified and directed.
S&F repair plastic water closet seat, white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device all as specified and directed by Engr-in-charge.
S&F in repair Health faucet,( code ALD 573 of Jaquar or equavalent Lumber, Mark
S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but incl brackets all as specified and directed by Engr-in-charge.
S&F in repair chromium plated Single handle sink mixer cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-charge.
Taking down steel tubing and connections incl cleaning for refixing or removal form site for 15mm bore pipe all as specified and directed by Engr-in-charge.
All as per srl item No 89 here-in-before but 20mm bore pipe all as specified and directed by Engr-in-charge.
S&F 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge. Make:- Jandal/ Prakash /TATA
All as per srl item No 91 here-in-before but 20mm dia all as specified and directed by Engr-in-charge.
Refixing 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge.
All as per srl item No 93 here-in-before but 20mm dia all as specified and directed by Engr-in-charge.
Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.
S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.
All as per srl item No 96 here-in-before but 75mm bore complete all as specified and directed.
All as per srl item No 96 here-in-before but 40 mm bore complete all as specified and directed.
S&F 100mm dia Stack clampsout of 50 mmby 5 mm flat iron and 16 mm dia around iron stays including bolts and nuts and securing ends of stays to wall or roof making good all respect completed as directed as specified.
S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) bends ISI marked any radius of 40 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed
S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed
S&F PVC (SWR) branch pices (single Y) equal of 110 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) branch pices (single Y) equal or un equal of 75 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) junction single, (double T) equal or un equal of 110 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) junction single, (double T) equal or un equal of 40 mm bore of pipe complete all as specified and directed.
M&L PVC (SWR) floor trap 75 mm, setting and jointing with solvent cement complete all as specified and directed.
M&L PVC (SWR) mulit trap 75 mm, setting and jointing with solvent cement complete all as specified and directed.
M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
Dismantling water tanks capacity n. exc 250 Ltr Ltr and removing from site all as specified and directed by Engr-in-charge.
Dismantling water tanks capacity exc 250 Ltr and n exc 500 Ltr and removing from site all as specified and directed by Engr-in-charge.
Dismantling water tanks capacity exc 500 Ltr and n exc 1000 Ltr and removing from site all as specified and directed by Engr-in-charge.
S&F rotational molded polyethylene water storage tanks white tripple layer (cylindrical vertical with closed top) capacity 250 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge.
All as per srl item No 115 here-in-before but capacity 500 Ltr all as specified and directed by Engr-in-charge.
All as per srl item No 115 here-in-before but 1000 Litre Capacity
S&F in repair Sink Mixer, ( code CQT 23309 Jaquar)
S&F in repair Towel Rail, ( code AQN 7711 of Jaquar)
S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S&F in repair staniless steel sink 1mm thick without drainage board for kitchen with plug , waste pipe , washers, including cantilever cast iron brackets , connecting union to waste pipe etc, overall size 495x420mm with bowl size 410x330x160mm .
S&F, stainless steel plate rack, 0.56mm thick of standard pattern, 31”x36” size including fixing to wall with 4 Nos 50mm long screws & PVC rawl plugs complete all as specified.
S&F, in repair, HDPE water storage tank lid black (with arrangement for locking) for 500 litres capacity tank complete all as specified and directed.
S&F, in repair, HDPE water storage tank lid black (with arrangement for locking) for 1000 litres capacity tank complete all as specified and directed.
S&F, in repair, HDPE water storage tank lid black (with arrangement for locking for 5000 litres capacity tank complete all as specified and directed.
S&F, in repair, chromium plated glass shelf of size 22" complete all as specified and directed. As per Cat No AQN-7771 of Make Jaquar or equivalent Make as approved by GE from Appendix 'C'.
S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size. As per Cat No. 554 of Make Prayag or equivalent Make as approved by GE from Appendix 'C'.
S&F in repair Double coat Hook, ( code AQN 7761 of Jaquar or equavalent Plumber, Mark
Brushing neat cement slurry with 3.0kg of cement per sq. metre
S&F in 100 MM repair steel window handles with nuts & bolts or with screws complete all as specified and directed by Engr-in-charge.
S&F in repair steel window peg stay all as specified and directed by Engr-in-charge.
S&F in repair butt hinges 100mm size by welding to angle iron chowkhat all as specified and directed by Engr-in-charge.
Supply and fixing solar control film 25 micron reflective type (gareware sun control or equivalent) all as specified and directed by Engr-in-charge.
S & F Door Seal rubber etc, complete all as specified
S&F 3 mm figured glass, pin head type and glazing with beads fixed with m in squares n exc 0.5 sqm in each pane complete all as specified and directed.
S & F Sheet glass 5.5 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane.
S & F in repair Sheet glass 6.3 mm thick quality and glazing with oil putty in square n exc 0.5 sq. m in each pane.
S & F Sheet glass10 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads and supply and fix sheet glass ordinary quality 4.8 mm thick in square exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads and supply and fix figured glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified.
S&F in repair 18/19 mm thick water proof block board of commercial quality Gde-I fixed with screws as kitchen , cup board box and shutters & shelves etc all as specified and directed by Engr-in-charge.
S&F 3 mm ordinary glass, type and glazing with beads fixed with m in squares n exc 0.5 sqm in each pane complete all as specified and directed.
Taking down chowkats or frames n exc1.5 sqm with shutter (without taking off shutters from the frames).
Taking down chowkats or frames exc 1.50sqm but n exc 4 sqm with shutter (without taking off shutters from the frames).
Refixing of shutters of any description n exc 1.0 sqm each, in same opening all as specified and as directed.
Refixing of shutters of any description n exc 1.0 sqm but n exc 2.0 sqm each, in same opening all as specified and as directed.
S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints
M&L for 35mm thick second class hard wood flush shutters solid core construction with block board core and plywood face panels commerical type on both side rebated & prepared to receive glass all as specified in SSR Part-I section 8, clause 8.20 (b) complete.
M&L for 35mm thick second class hardwood glazed and skelton door shutters open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sashbars size of members of shutter as specified in SSR Part-I section 8, clause 8.20 (a) complete.
Solid PVC Door Frame (Single rebated) of size 60mmx 30 mm made out of soild PVC Foam with homogenous fine celluar structure having smooth outer integral skin with 100x8 sheet metal CSK SCREWS complete all as specified and as shown on drawing(Note : door frame shall be water proof ,termite proof,elegant and should have excellent screws holding strenght to fixed hings and hld door properly for long life).
S&F, Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing.
S&F factory made plain framed ,40 mm Panelled shutter (two Panel) with lock rail of 9 mm B.W.P. commercial ply or 12 mm veneered patticle boar with commercial veneering on both face , the size of rail and stile as per IS: 1003 (Part 1) kiln seasoned and chemically pressure treated.
S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel window complete all as specified and directed by Engr-in-charge.
S & F Steel window with side hung shutters incl Box type hinges with steel handle , steel peg stay, complete with glazing bars, dovetailed and welded.or ventilators, fixed type, with glazing bar complete all as specified and directed.
S & F Steel window with side hung shutters incl Box type hinges with steel handle , steel peg stay, complete without glazing bars cooler type window, dovetailed and welded.or ventilators, fixed type, with glazing bar complete all as specified and directed.
M&Lfor 12 mm thick in repair plywood grade BWR,type BB, Fixed with screws ro timber frame work,shelves etc all as specified.
Supply and fixing .90 mm thick decorative laminated type-I of surface finish colour and patten as approved ,fixed with approved adhesiva as manufacture.
S&F in repair telescopic wall -bearing shelf closing channels Chanel and ( exc 300mm n exc 500 mm ) as complete all as specified and directed.
S&F in repair Handles of senso (as per 3D designs) 150 mm inclduding all connection fitting as complete all as specified and directed and approved by GE.
S&F in repair Europa cupboard locks as complete all as specified and directed.
S&F 30 mm width of flaps Continous(piano)hinged, mild steel bright finish or electrogalvanised etc complete all as specified and direcated
Supply & Fixing 'in repair' 18 mm thick, PVC sheet one side prelaminated of approved texture ("Celuca ply of Rajshree make or equivalent in "Sintex" as approved by GE ) as in Kitchen cabinet and cupboard (withshelves and partitions) including necessary fitting & fixture as per manuacturer's instructions complete all as specified & directed.
S&F in repair aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed by Engr-in-charge.
S&F in repair Aluminium anodised Butt hinges medium weight minium 100mm long complete.
All as per srl item No 164 here-in-before but 75mm long size complete.
S&Fin repair 40 mm dia , brass cupboard knobs fixed with nut ,screw and washer of mild steel bright complete
S&F in repair Aluminium anodised barrel tower bolts of extruded section 200mm long complete,
S&F in repair Aluminium anodised barrel tower bolts of extruded section 150mm long complete,
S & F in repair Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300 mm long complete.
S&F in repair Aluminium handles cast type anodised of 150mm complete.
S&F in repair Aluminium handles cast type anodised of 100mm complete.
S&F in repair Brass handles cast type anodised of 150mm complete.
S&Fin reapir Brass handles cast type anodised of 100mm complete.
S&F in repair mild steel pressed handles cast type anodised of 150mm complete.
S&F in repair mild steel pressed handles cast type anodised of 100mm complete.
S&F in repair Mortice lock,vertical type size 100 mm 4 lever Make- Godrej as complete all as specified and directed
S&F in repair Brass sliding door bolt with brass hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections orBrass of bolt 250mm complete all as specified and directed by Engr-in-charge.
S&F Floor 150 mm door stopper of aluminium alloy body and tongue anodised with hard steel spring ,fixed in floor complete
M&L 75 mm Z-Section Window hingsmedium weight cold rolled mild steel Completed
Welding in repairs n. exc 2.5cm in length (one welder with helper as per requirment base must be depolyed with thin 12 hours . Other wise penlty per Rupees Day 500 /)
All as per srl item No 180 here-in-before exc 2.5cm but n exc 5cm in length (one welder with helper as per requirment base must be depolyed with thin 12 hours . Other wise penlty per Rupees Day 500 /)
S&F Curtain dropary 25mm dia and 1.5 mm thick mild steel rod of fancy type with pvc coating excluding brass and brackets with curtain rings of approved quality etc complete.
S&F mild steel Nobs and bracket complete all as specified and directed.
M&L for floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door etc. complete all as specified and directed.
S&F in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding suitable for door shutters of 701-805 mm in width & wt between 36-60 kgcomplete all as specified and directed by Engr-in-charge.
Supply & fixing frame work for railing fixed to wall/ floor made with 50 mm/40mm/30mm stainless steel (202) pipe including cutting & necessary welding as per drawing.
S&F, Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.
Taking down aluminium door shutter including floor door closer, removing galss with beading before taking down and refixing of glass, beading and floor door closer after replacing broken parts of aluminium shutter including easing of shutter complete all as specified.
S&F steel work in tubular trushes including special shaped washer etc complete using ERW or induction but welded tubes confirming to I.S. 1161-1979 grade St. 240 etc complete all as specified and directed.
Dismantling of AC and plain/ corrugated steel sheeting, Fibre glass sheet any gauge, thickness, incl nainital or similar pattern roof covering complete.
S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.
S&F, 1mm thick Plain, galvanised, mild steel sheeting of class 7, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as directed.
S&F 2mm thickness fibre glass reinforeced translucent corrugated sheeting with two corrugations side lap fixed with coach srew and washer in roof ,wall etc complete all as directed.
S&F .63 mm thick black, corrugated mild steel sheeting with two corrugations side lap ,fixed with coach screws and washers in roofs walls,etcetc complete all as directed.
S&F 3 mm thick coloured polycarbonate sheets as in roof covering and fixing on stainless steel truss/ tubular truss with sufficient and compactable washer and bolts including bending if required.
S&F framed work such as grills, gratings etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe- 290-0 Gde-E-165
Schedule of credit amount of Rs. 58,889.50 to be deducted during AOC
sunil traders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .