REPAIR REPLACEMENT OF CEILING WALL PANELING AND WOODEN JOINERY OF VARIOUS BLDGS IN SECTOR D UNDER AGE BR I OF GE 865 EWS

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each, complete all as directed by Engr-in-Charge.

Taking down shutters of any description area not exceeding 1 Sqm each, complete all as directed by Engr-in-Charge.

Hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one complete all as specified and directed.

Taking down wooden shutters of any description not exceeding 1.00 sqm, resecuring or easing and adjusting and refixing the same in same opening with old builder's hardware as required complete all as specified and as directed by Enginner-in-Charge.

Taking down wooden shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm, resecuring, easing and adjusting and refixing the same in same opening with old builder's hardware as required complete all as specified and as directed by Enginner-in-Charge.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixed etc complete all as specified.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutter, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws 100mm long (3 Nos) type B-21 hinges, (2 Nos) suitable handles etc complete all as specified and directed.

S&F Anodised aluminium powder coated (minimum 50 micron thickness) windows and ventilator shutter, side hung type with out sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodized aluminium fittings such as 150 mm long peg stay (01 No), 100mm long (2 Nos) type B-21 hinges, 200mm long (1 Nos) suitable handles, aluminium snap beading, screws, etc. complete all as specified and as directed.

S&F Pressed steel frames for doors, made out of 1.25 mm thick MS sheet, with one or more rebates including supply and fixing of necessary fixing lugs, hinges, lock strike plate etc. complete, of frame size 105 mm x 60 mm, including one shop coat of red oxide zinc chrome primer, including bottom of each chowkat to be welded with and including one coat of black paint to prevent from corrosion complete all as specified and as directed by Engr-in-Charge.

M&L 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints, supplied and fixed plain fillets, square, rectangular or triangular in section clean swan, secured with nails or brads complete all as specified and as directed.

S&F Mild Steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in hold fast, bed block and like complete all as specified and directed by Engr-in-Charge.

S&F factory made 35mm thick IInd Class Hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed by Engineer-in-Charge.

S&F 40 mm thick flush shutters, solid core construction, with block board core and plywood face pannels and one face is covered with decorative face veneer with 4mm thick teak wood beading all around the edges to match, complete all as specified and directed by Engineer-in charge.

S&F for factory made 35mm thick 2nd class hard wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats all as specified and as directed by Engineer-in-Charge.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and as directed

S&F Steel windows (frame with shutter) with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded (glass shall be measured and paid separately) complete all as specified and as directed by Engineer-in-Charge.

S&F for 4.80mm thick sheet plain glass ordinary quality and glazing with oil putty/ wooden beads with nails in square n.exe 0.5 Square metre in each pane etc complete all as specified and directed.

M&L plain Sheet glass 3.00 mm thick, ordinary quality and glazing with oil pane putty in squares not exceeding 0.5 Sq.mm in each pane, complete, complete all as specified and as directed.

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, fixed in repairs complete all as specified and as directed by Engr-in-Charge.

S&F Butt hinges, medium weight, cold rolled mild steel and fixed with screws to wooden frames or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified and directed by Engineer-in- Charge.

S&F Butt hinges, medium weight, cold rolled mild steel and fixed with screws to wooden frames or with welding to existing MS frames, 75 mm size, ISI marked, complete all as specified and directed by Engineer-in- Charge.

S&F for Aluminum, anodized, barrel tower bolts, ISI Marked, of extruded section 150 mm long, complete all as specified and directed.

S&F for Aluminum, anodized, barrel tower bolts, ISI Marked, of extruded section 100 mm long, complete all as specified and directed.

S&F stainless steel butt hinges, medium weight colled rolled 100 mm size, ISI marked, complete all as specified and directed by Engineer-in- Charge.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed, fixed in repairs, complete all as specified and as directed

S&F in repair aluminium door closer (aluminium extruded section) hydraulically regulated designation No 3, universe type, suitable for door shutte of 851 mm to 1000 in width and of weight 61 to 80 kg

M & L double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S & F floor door stopper 150mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed complete all as specified and as directed.

S & F brass mortice lock 4 levers (Harrison) vertical type size 100 mm or above in old or new position as directed by Engr-in-Charge.

S & F Harrison rails, anodised aluminium alloy with fixing brackets, stops rollers in repair etc complete all as specified.

S&F 19mm dia mild steel, chromium plated curtain rods, with brackets, end bulbs, fixed in repairs, complete all as specified and as directed by Engr-in-Charge.

S&F in repair 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed by Engineer-in-Charge.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge.

M&L for second class soft wood clean swan as in battens for grids of ceiling and lining, plain fillets exc 13 sqcm and n.exc 25 sqcm, square/ rectangular in section, secured with nails or brads to timber frame work including dismantlng fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in section complete all as directed.

M&L for second class soft wood clean swan as in beading for edges of ceiling, lining, wooden flooring work, plain fillets exc 6 sqcm and n.exc 13 sqcm, square/ rectangular in section , secured with nails or brads to timber frame work including dismantlng fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in section all as specified

M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws including dismantlng fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in section all as specified

M&L 6mm (5 ply) thick veneered decorative (Knoty Pine) plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work including taking down old wall/ceiling board/ply wood all as specified and as directed by Engr-in-Charge.

All as per Srl Item No 43 here-in-above but on ceiling including taking down old wall/ceiling board/ply wood all as specified and as directed by Engr-in-Charge.

M&L for 9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in walls complete including taking down old wall/ceiling board/ply wood all as specified and as directed by Engr-in-Charge.

M&L for 9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in ceiling complete incluidng taking down old wall/ceiling board/ply wood all as specified and as directed by Engr-in-Charge.

M&L for not less than 15mm thick wooden battens of 100mm wide fixed each other with male and female grooves fixed with screws to timber frame work as in wall panelling, shelves/boarding including taking down old wall/ceiling board/ply wood all as specified and as directed by Engr-in-Charge.

All as per Srl Item No 47 here-in-above but on ceiling including taking down old wall/ceiling board/ply wood all as specified and as directed by Engr-in-Charge.

M&L French polishing on new wood or wood based surface of any width or girth or any description, including cleaning and preparing the surface including a coat of wood filler on new surface with two or more coats complete all as specified and as directed.

M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated , including backing with thermocol sheets or as specified by manufacture including dismantling boarding / wooden flooring of any description, fixed in any positon all as specified and directed.

S & F anodised aluminium snap grid of size 605 x 605 frame work of false ceiling including hanger 6mm dia GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling clearts made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasterners 12.5 mm dia 40mm long complete all as specified and directed by Engr-in-charge.

M & L providing and fixing Gypsum board 12mm thick and 600 x 600 mm in size in ceiling fixed with screw or with staples on snap grid as per manufactured instructions complete all as specified and directed by Engr-in Charge-

M&L for preperation of new or old untreated wood or wood based surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation new steel surfaces of any description, not otherwise described, over 10cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

M & L in repair particle board 18/19mm thickness, medium density flat pressed, single layer type or three layer type with with BWR type adhisive , fixed with screwd to timber framed work complete all as specified and as directed

M&L 12mm thick toughned glass as in hinged doors, partitions autimtic doors and similar work including cutting to shape , drilling holes required complete all as specified and as directed by the Engineer-in-Charge Note- All connected items will be measured and paid seperately

S & F in repairs stainless steel floor hinges for toughened glass door complete all as specified and as directed.

S & F stainless steel handle 25mm dia and 450mm long for toughened glass door complete all as specified and as directed.

S & F in repairs stainless steel pivot for toughened glass door complete all as specified and as directed.

S & F in repairs stainless steel bottom/floor lock for toughened glass door complete all as specified and as directed.

M&L for preperation of old wooden wall & ceiling surface surface any description over 10cm in width or girth and applying one coat of synthetic enamal paint complete all as specified and as directed.

Rampal Singh Contractor

M.S Sharma Enterprises

Mehar Enterprises

R B TRADERS

M/S UNITED CONSTRUCTION CO.

M/S Praveen Kumar and Sons

M/s Aman Enterprises

M/s Koul & Sons

M/S NANCY ENTERPRISES