SPECIAL REPAIR TO BLDG NO T1 T2 SECURITY WALL AND FENCING LIGHTENING CONDUCTOR FROM SHED NO 1 TO 11 AND BLDG NO P10 P31 P34 P35 AND INVERTER AT OPS ROOM AND CONFERENCE HALL UNDER GE NARANGI

Amount

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surfaces in soft/loose soil complete all as specified & as directed.

Excavation in trenches n.exc 1.5m wide and not exceeding 1.5 m in depth for foundation etc, or for shafts, wells, cess pits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft / loose soil etc complete all as specified and as directed.

Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each in soft / loose soil etc complete all as specified and as directed.

Removing of surplus excavated material not exc 50m and depositing where directed at a level n. exc 1.5 m above the starting point etc complete all as specified and as directed.

M&L for hardcore of broken or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and as directed.

M&L PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) in foundation filliing and mass concrete complete all as specified and as directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching including necessary formwork and finishing of exposed surfacs of concrete etc complete all as specified and as directed.

M&L for reinforced cement concrete M-25 design mix as in foundations, including rafts, footings, foundation beams; plinth beams bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25 design mix as in beams, seimic bands, cantilevers, bressumers and lintels complete all as specified as directed.

M&L for reinforced cement concrete M-25 design mix as in Columns, pillars, piers, posts and struts etc.complete all as specified as directed.

M&L for reinforced cement concrete M-25 design mix as in chajjas etc.complete all as specified as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc. 6m mean radius and built in CM 1:6 etc complete all as specified as directed.

All as per item No.13 Above but except bricks. ( Serviceable bricks shall be obtained from demolition of brick work here in before).

M&L for brickwork with subclass ‘B’ old sized bricks, straight or curved on plan to any radius in half brick thick walls and built in CM 1:4 etc complete all as specified as directed.

M&L broken glass coping on op of walls in cement mortar 1:3 complete all as specified as directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified as directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified as directed.

M&L Formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified as directed.

S & F in repair 20 mm thick, second class hard wood boarding clean sawn, planed one side with butt joints and fixed with nails in any situation as in eaves board, etc complete all as specified and directed.

Dismantling timber under 40 sq. cm in section as in fillets, rails, rafters, purlins etc fixed with nails, screws complete all as specified & as directed.

Dismantling timber scantlings 40 sq. cm and over in section (unframed work), in any position complete all as specified & as directed.

M & L second class hard wood scantling fixed in clean sawn timber in framed work complete all as specified and as directed

Taking down roof trusses, coupled rafters or trussed beams of clear span above 4.00 m and upto 8.00 m complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exceeding 1.5 Sqm each including builders hardware complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.

S&F 30mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and directed.

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (with out sash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed.

M&L for 1.25mm thick factory made pressed steel frames of size 105x60mm with single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete including PCC 1:3:6 type C-0 as in back filling of window/door frame all as specified and directed.

M & L for PCC 1:3:6 type C-1 ( 20mm graded aggregate) as in bed block or hold fast including making good surfaces complete all as specified and as directed.

S&F factory made steel window with side hung shutters, glazed shutter including both side openable ( outside glazed window and inside fly proof window) including projecting type hinges with steel handle and steel peg stay complete with glazing bars and 12mm square bars or round bars of approved design welded to steel window frame dovetailed or welded complete all as specified and directed. (Guard bars or square bars shall be measured and paid seperately).

S&F 12mm thick toughened glass door ( both side opened) made up of top and bottom rail of suitable aluminium section including designer stainless steel handle two numbers of minimum 30cm size, lock one number with and including aluminium chowkat and heavy duty double action floor spring complete all as specified and directed.

S&F aluminium anodised sliding glazed window shutter ( double leaf glazed shutter and single leaf mosquito proof shutter each in single frame work) without sash bars with anodised aluminium shutter of section 40mmX20mmX1.10mm thick and window chowkat of section 92.00mmX29.50mmX1.20mm thick including necessary jointing clips, glazing clips, rubber packing, snap beading , screws, handle, tower bolts and locking arrangements etc including 4mm thick sheet glass tinted quality on panel and stainless steel wirecloth or aluminium anodised wire cloth for mosquitto proofing, 0.45mm nominal dia and average width of aperture 1.40mm fixed with aluminium screws and tacks and making good disturbed surfaces complete all as specified and as directed.

S&F powder quoted anodised aluminium push , pull typ partly panelled and partly glazed door shutter ( single leaf/double leaf) having top rail of section 85.00mmX 44.45mmX 2.00mm thick, bottom rail of section 85.00mmX 44.45mmX 2.00mm thick, door vertical of section 44.45mmX44.45mmX 2.00mm thick and lock rail of section.85.00mmX 44.45mmX 2.00mm thick with aluminium anodised chowkhat of section 63.50mm X 33.10mm X 2.50mm thick including necessary jointing clips, glazing clips, rubber packing, snap beading, screws, handle and locking arrangement etc, including 12mm thick prelaminated particle board, interior grade prelaminated with decorative face lamination on both sides on bottom panel and 5.50mm thick float glass tinted quality on top panel including one hydrolic door closure complete all as specified and directed.

S&F 30 mm thick Factory Made Solid Panel PVC Door Shutter consisting of frame made out of M.S. tubes of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet 5mm thick ‘C’ channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and plain colour PVC sheets for top rail, lock rail & bottom rail on either side, and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s instructions and drawing. The width of stiles & rails will be in proportion to the width of the door shutter as per SSR Clause No 8B.2.1

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing etc complete all as directed.

S&F 150 mm size aluminum anodised, barrel tower bolts of extruded section etc complete all as directed.

S & F 100mm size stainless steel butt hinges, medium weight, and fixed etc complete all as directed.

S & F 75mm size Butt hinges, medium weight, cold rolled mild steel, and fixed etc complete all as directed.

S&F 150 mm long extruded anodized aluminum alloy handles, febricated type, etc complete and directed.

S&F in repair powder quoted aluminium alloy curtain rails 20mm dia fixed to required lengths. complete all as specified and as directed.

S&F in repair chromium plated curtain rails bracket fancy type for 20mm dia curtain rails complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as directed.

Dismantling of plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & as directed.

M&L Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and directed.

M&L Pre- painted hot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specified complete all as specified and directed. Note: To be executed for provision of ridges and hips.

S&F in repairs, false ceiling with 12mm thick 600X900mm plaster of paris sheets fixed with machine screws on and including GI channel 16 gauge grid work, main joists placed at 750mm centre to centre and cross joist 450mm centre to centre hanging with 6mm dia GI wire suspenders and treating the POP sheets with thin layer of POP with Gypsum binder and prepared till smooth finish is obtained and applying two coats of plastic emulsion paint over a coat of primer matching with the colour of ceiling sheets complete all as specified and as directed.

S&F decorative cornices / moulding using POP of cross sectional dimension exceeding 13 sqcm and not exceeding 25 sqcm as per pattern and design as approved and fixed in position including preparing the surface and applying two coats of plastic emulsion paint over a coat of primer matching with the colour of ceiling sheets complete all as specified and as directed.

S&F decorative flower design / moulding using POP of dia not exceeding 40 cm in circular shape as per pattern and design as approved and fixed in position including preparing the surface and applying two coats of plastic emulsion paint over a coat of primer matching with the colour of ceiling sheets complete all as specified and as directed.

S&F in repairs, suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement designer Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L TMT steel bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for mild steel TMT bars 5 mm dia and over upto and including 10mm dia cut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia as in stirrups, spacers and binders complete all as specified and as directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5 cm but not exceeding 15 cm long and diameter of shank 5 to 12mm completed all as specified and as directed.

Dismantling fencing wire mesh of any size and type complete all as specified and as directed.

Supply only chain link fencing wire mesh of size 50X50mm, made with 3.15 mm dia including 4mm dia line wire conforming to IS 2721 mild steel galvanised wire complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolt etc including provision of binding wire complete all as specified and as directed

S & F galvanized two strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to RCC / steel post etc. including securing or tying at crossing with and providing of galvanized mild steel wire, staples or steel pins, etc. (each line of wire to be measured separately) complete all as specified and as directed.

Dismantling post or struts ( wood, steel, or RCC) any section, including taking out embedded portion from concrete, brick work, masonry etc. and making good disturbed ground complete all as specified & as directed.

S&F mild steel angle iron post & strut etc. in fencing including embedding in concrete and screwing etc. including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work confoRming to Fe-290 GdeE-165 completed all as specified and as directed.

S&F rolled mild steel framed works as in doors or gates of angle or other section with gusset plates,, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hangings also fastening and fixing etcconforming to Fe.290.Gde-E-165.

M & L for rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St.-240 complete all as specified and as directed.

S&FMild steel framed work such as grills,gratings,etc.with ends of bars shouldered and/or riveted,or forged into spikes,framed guard bars, barred iron doors,ladders, framed balusters, walk ways,railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of plain cement concrete (Un-reinforced) in ground floors and paving n exc 15cm thickness (below or above ground level) including removal of spoils/ demolished materials not exceeding 50m and depositing complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in sub base finished to receive floor treatment complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in levelling course complete all as directed.

M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in subase finished to receive floor treatment etc complete all as directed.

M&L in repair 25mm thick 1:2:4 type B-0 precast cement concrete louvers and jallies ( measured solid) as directed including all mouldings but excluding frameset in CM 1 :6 complete all as specified and directed.

M&L for 75 mm thick, PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide and 30 mm deep at every 2.4 mtrs interval filled with bitumastic compound etc complete all as specified and as direted.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.

M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for 10mm thick Vitrified tiles light shade area of each tile n exc 0.36sqm laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for 10mm thick Vitrified tiles light shade area of each tile n exc 0.36sqm as in vertical surfaces such as skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M & L for glazed ceramic coloured tiles 375x250x7mm/300x200x7mm thick, set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps etc over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Demolition of stone slabs and tiles of any description and thickness in floors, approns etc. complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade including 30mm thick sand cushioning and joints filling with sand complete all as specified & as directed.

M&L for 20mm thick granite ( any type) machine cut ,as in steps, jambs, pillars, window cills, cookong platforms and the like laid over cement screed of 15mm thick in CM 1:4 including pointing in white cement 1:2 using marble dust with admixtures of pigments match the shade of granite stone including rubbing and polishing complete all as specified and as directed.

Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for 5mm thick rendering in CM 1:3 on concrete surfaces in ceiling finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on brick/ concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L preparation of newly plastered surfaces of wall and applying one coat of alkali resistant primer over a coat of white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil bound distemper complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.50sqm in each pane frosted on one side complete all as specified and directed.

Taking up or down 15 mm bore GI tubing from trenches / wall including all fittings segregated, cleaning and stacking the pipe for reuse at site if required complete all as specified and as directed. Note : Excavation and earthwork if any shall be included in the quoted rate

S&F GI tubing15 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Refixing only old serviceable 15 mm bore Steel tubing and connections as obtained from taking up/down old steel tubing including provision of new fittings in new or old position to walls,ceiling, flooring etc. complete all as specified and as directed.

Taking up or down 20 mm bore GI tubing from trenches / wall including all fittings segregated, cleaning and stacking the pipe for reuse at site if required complete all as specified and as directed. Note : Excavation and earthwork if any shall be included in the quoted rate

S&F GI tubing 20 mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.

Refixing only old serviceable 20 mm bore Steel tubing and connections as obtained from taking up/down old steel tubing including provision of new fittings in new or old position to walls,ceiling, flooring etc. complete all as specified and as directed.

S&F in repair of 15mm dia Bib taps quarter turn cast copper alloy chromium plated, with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

S&F in repair, 15mm bore dia of concealed stop valves cast copper alloy fancy type chromium plated with long shank and cup complete all as specified and as directed.

S&F in repair glass shelf of size 450mmX150mm with chromium plated guard rail below mirror for keeping soap box complete all as specified and as directed Make Paryag Cat no. BEA-47 or equivalent as approved

S&F in repair corner glass shelf fency type 6mm thick of size 250mmX250mm/300X300mm fixed over chromium plated brass bracket complete all as specified and as directed Make Paryag Cat no. BEA-46 or equivalent as approved

S & F in repairs, health faucet ABS with 1.2m SS flexible tube and ABS wall hook fixed with necessary fixers complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank 500 litre capacity of triple layered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule including dismantling of old tank of any description complete all as specified and directed.

S & F in repairs, brass chromium plated central hole basin mixer complete all as specified and as directed.

S&F in repair 125 mm dia chromium plated swivel type shower rose with 190 mm long chromium plated shower arm and wall flange suitable for fixing 15 mm bore iron pipecomplete all as specified and directed.

S&F in repair fancy type Brass chromium plated 600mm long Towel Rail fixed with screws and wooden/plastic cleats etc. complete all as specified and directed.

S&F in repair cast iron floor trap 100mm dia outlet with grating including jointing to waste pipe fixed in cement concrete type B-1 ( 1:2:4 ). complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floors or fixed to wall as in waste /soil / rain water pipe etc. complete all as specified and directed

S&F 110 mm dia PVC (SWR) bends of any radius complete all as specified and directed

S&F in repairs vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

S&F in repair vitreous china wash basin white oval shape size 550 mm x 400mm including all fittings including cutting for and pinning in ends of brackets or erecting stand etc complete (waste coupling 32mm bore CP, 32mm bore PVC waste pipe, cast iron brackets etc shall be deemed to be included in the quoted rate) complete all as specified and directed.

S&Fin repair PVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including brackets complete all as specified and directed.

S&F in repair vitreous china urinal half stall type white ( excluding flushing cistern) including urinal spreader, PVC connection, 40mm PVC waste pipe with CP waste coupling 40mm providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc complete all as specified and directed.

Taking down ceiling/exhaust/wall fan including connection wires carefully, removing to store in safe custody ,painting with synthetic enamel paint by spraying incl. filling cavity and refixing the same in original position after repairing (rewinding if require) including changing the hook ,clamp ,pipe for ceiling fan as per requirement of site complete all as directed

Taking down carefully aluminium/ copper point wiring for light/fan/ socket/bell or power point incl. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete removing materials to store for keeping in safe custody site or handed over to contractor as schedule of credit and making good disturbed surfaces of walls, floors, etc complete all as directed by Engineer-in-Charge.

M&L for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathed FRLS cable, 1100 volts grade IS-694 marked, with multistranded copper conductors and earth continuity wire with 1.5 Sqmm cable (including connecting to earth dolly) laid/fixed in and including surface casing caping on walls/ceiling, and also including sunk type PVC terminal box and 3 mm thick plastic laminated sheet top covers for one light/fan/exhaust fan point controlled by one number one way 5 Amp switch complete all as specified and as directed.

All as per item serial No 116 here-in-before but One 3 pin socket outlet 5 amps on the same board with other switches

All as per item serial No116 here-in-before but One socket outlet 3 pin 5 Amp on independent board.

All as per item serial No 116 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable.

S&F switch piano, flush type single pole one way 5 Amps 230 volt complete all as directed.

S&F socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as directed.

S&F switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as directed.

S&F switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 16 Amp flush type complete all as directed.

S&F ceiling rose surface bakelite 65x50mm three terminal complete all as directed.

S&F lamp holder insulated PVC/ Polycarbonate/ bakelite body, with back plate suitable for batten fitting or PVC round or squre box, complete all as directed

S&F stepped type electronic fan regulator, two module size, flush type complete all as directed.

S&F Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagonal bulk head black-lit LED10 W -IP-66 luminaire comprising of high brightness LEDs complete all as specified and as directed. Make:- Havells Model HEXAFT10WLED857SSYMBOPC or equivalent Model of make : Philips / Crompton /GE.

S&F in repair LED light fitting of approved make 1X 20 W, 220V, AC decorative box type with driver, holder including LED lamp and connecting up with three core flexible copper conductor cable of suitable size complete all as directed.

S&F in repair LED luminaire 600X600mm, 35/36 Watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamps suitable for roof ceiling including connecting up with three core flexible copper conductor cables of suitable size complete all as directed. Make : HAVELLS/PHILIPS/CROMPTON/BAJAJ

S&F in repair LED street light fittings of approved make 35 W 230 V AC outdoor type with high pressure diecast aluminium housing and heat resistant complete with driver, lamp, bracket with impact and corrosion resistant including thermal management in multiple optics complete wit IP 65/66 protection complete all as directed.

Supply and fixing in repairs street light bracket made of GI pipe 40 mm bore light grade(bend to shape) , 2.0 metre long and fixed with Ms flat iron clamp(clamp shall be 40 X 5mm ), nuts, bolts and washers on pole complete all as specified and directed.

S & F in repair SPN DBs 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar complete all as specified and as directed. Make :- Legrand Cat No 5076 11 or equivalent model in Siemens / Schneider

S&F in repair MCBs, SP 6 to 32 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. Make :- Legrand Model 4085 90 to 95 orequivalent model in Siemens / Schneider/L&T

S&F in reapir MCBs, SPN 32 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. Make :- Legrand Model 4086 09 to 17 or equivalent model in Siemens / Schneider/L&T

Supply, laying and testing of XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 16 sqmm 4 core laid in trenches / floor or fixed on wall /pole with brass compression cable glands, terminal lugs etc, including taking out/ down the existing old cable complete all as specified and as directed.

Supply and lay GI tubing 25mm bore light grade for cable protection and fixing to the existing pole with flat iron clamp 25x 3mm including nut bolts complete all as specified and as directed.

Supply and spreading fine dry river sand for cushing to UG cable including spreading levelling and hand punning etc complete all as specified and directed.

M&L for sub class 'B' old size bricks laid in trenches for cable protection laid flat width wise along the length of cable complete all as specified and directed.

Supply, install, commissioning and testing in repair of Hybrid type ( Normal and solar) 5 KVA pure sinwave UPS inverter with 8 ( eight) battery system ( 8X12 volt= 96 volts) with sinle phase input and single phase output, MCB protection, advanced MPPT technology, smart multicolour LCD display with minimum two years warranty on complete product complete all as specified and directed. (Make-Microtek/Luminous/Exide

Supply, install, commissioning and testing in repair of tubular battery ( 12 Volts) with four years warranty with minimum two years warranty complete all as specified and directed. (Make- Luminous/Exide/Amron

S&F PVC cover for keeping all the batteries and inverters complete all as specified and directed.

Taking out old unserviceable GI/Aluminium strip of any size and type in any height and in any location.

M&L aluminium strip 25X3.15mm with V type porcelain insulator or DMC insulator of suitable size and fixing with GI screws etc. for roof conductors and down conductors above ground complete all as specified and directed.

Refixing of servicable aluminium / GI strip as obtained from taking out of old strip on top of V type porcelain insulator and providing GI nuts, bolts, screws cleats etc required for fixing complete all as specified and directed. ( ( Note: The unit rate quoted by the contractor is deemed to be inclusive of V type or DMC type porcelain insulator).

M&L in repair for fabrication of display board for earth pit nos, location and periodical test results for lightening arrester earthing, made of MS Sheet 4.0 mm thick sheet, rectangluar welding on 12 mm dia rod of height from ground level 30 cm including fixing in PCC 1:2:4 type B-2 in foundation, with 20 cm x 20 cm x 20 cm (below ground level) dimension of board shall be 30 cm x 25 cm. The instruction shall be written on black painted board in white letters not less than 2 " size for all type of boards complete all as specified and directed . Note :- (a) all necessary MS Sheet, aluminium screws and PCC works etc are deemed to be included in the rate quoted by the contractor.

S&F in repair for thermoplastic (polycarbonate) juction box for test point without terminal block of dimesion 130x180x77 mm IP 66 halogen free and weather proof including four hexagonal anticorrosive screws for out door installation.

M&L in repair for test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 03 Nos 8mm dia 25 mm long hexagonal head screws for fixing strips to test point including necessary fixing arrangement to fix test point terminal block to test point juction box all as sprecified and directed.

M&L in repair for air termination, single pointed, aluminium rod 12mm dia and 300 mm long to be fixed on horizonal lightning conductor with suitable fixing arrangement all as specified and directed.

Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level connected to galvanised iron strip 25X4mm as earth lead by means of bolts, nuts, check nuts and washers of steel and other end connected to earthing test point and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 with and including demolition of old earthing. ( Note: The unit rate quoted by the contractor is deemed to be inclusive of GI strip from top of earth plate upto 7.5m above ground level).

Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 with and including demolition of old earthing..

KAMAKHYA CONSTRUCTION & BUILDERS

U S CONSTRUCTION