Upgradation of Govt. Museum, Ahar (Udaipur). (Civil Works)

Amount

Provision and fixing of 3 Seater Bench having size of 2100mm(L)x600mm(W)x450mm(H) fabricated in 12-18 mm thick HDHMR / HDF / Flexi Ply board with all visible outer finish in PU Paint of approriate colour/shade. The bench seat shall be padded with high resilience polyurethane foam having density 40kg/m³ and upholstered with leatherite tapestry 0.7mm thick and 500 GSM. The item includes necessary support structure and framing of teak wood to take the intended load and achieve strudiness. The fabrication work to complete as per the direction of Engineer in Charge. Dimensions may vary as per design requirements.

Providing and placing in position medium back revolving chair having back size approximately 450mm(W) x 500mm(H), seat size approximately 470mm(W)x490mm(D).The back is made of injection moulded glass filled nylon and upholstred using net fabric. The armrests are up-down adjustable. Armrest top has an integrated layer of thermoplastic elastomer. The chair is provided with a Lumbar support consists of Polypropylene pad with loulded polyurethane foam and covered with Polyester Fabric. The height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. The Chair mechanism is designed with the following features: 360 revolving type, Single point control, Tilt tension adjustment, 2 Position Locking with anti-shock feature and The pneumatic height adjustment. The product shall be complete as per approved sample and as per the direction of Engineer-Incharge. The complete furniture unit is factory assembled with knock down fittings.

Provision and fixing of a display case made out of 12-18 mm thick HDHMR and 10mm thick toughend glass with appropriate framework and finished with ducco paint of approved shade. Item to include all the fittings, hinges, hardware, locks, magnetic catchers, push button etc. required as per design. The box shall be designed with support structure to hold the weight. Dimensions may vary as per design requirements. The item includes all the necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes etc to do the required work is in the scope complete as per direction of Engineer-in-Charge. Overall Size: 2400x600x2100

Complete Repair and Restoaration of the Wall display units/floor mounted display units in the museum and replacement of broken/damaged parts, integrated lights, opening mechanism, hinges, knobs, beading, artefact mounding mechanism, PU paint/duco paint of approved shade etc. Item to include all the fittings, hinges, hardware, locks, magnetic catchers, push button etc. required as per design. The box shall be designed with support structure to hold the weight. Dimensions may vary as per design requirements. The item includes all the necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes etc to do the required work is in the scope complete as per direction of Engineer-in-Charge. Quantity to be measured in front surface area of the display cases.

Provision and fixing of a display podium as per the design. The podium shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with duco paint of approved shade. Item to include all the fittings, hinges, hardware, locks, magnetic catchers, push button etc. required as per design. The box shall be designed with support structure to hold the weight. Dimensions may vary as per design requirements. The item includes all the necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes etc to do the required work is in the scope complete as per direction of Engineer-in-Charge. Overall Size: 2400x1200x1200mm

Provision and fixing of a display podium as per the design. The podium shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with duco paint of approved shade. Item to include all the fittings, hinges, hardware, locks, magnetic catchers, push button etc. required as per design. The box shall be designed with support structure to hold the weight. Dimensions may vary as per design requirements. The item includes all the necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes etc to do the required work is in the scope complete as per direction of Engineer-in-Charge. Overall Size: 2400x2400x1450mm

Provision and fixing of a display podium as per the design. The podium shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with duco paint of approved shade. Item to include all the fittings, hinges, hardware, locks, magnetic catchers, push button etc. required as per design. The box shall be designed with support structure to hold the weight. Dimensions may vary as per design requirements. The item includes all the necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes etc to do the required work is in the scope complete as per direction of Engineer-in-Charge. Overall Size: 3000x600x750mm

Provision and fixing of a display rack as per design. The shelf shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with duco paint of approved shade. Item to include all the fittings, hinges, hardware, locks, magnetic catchers, push button etc. required as per design. The box shall be designed with support structure to hold the weight. Dimensions may vary as per design requirements. The item includes all the necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes etc to do the required work is in the scope complete as per direction of Engineer-in-Charge. Overall Size: 2100x450x1500mm

Provision and fixing of display table as per design. Top part of the box, size of 300mm is to be constructed with 10 mm thick clear toughened glass from all sides. The bottom part of the box of size 750 mm shall be made of 12-18mm thick HDHMR as suitable to meet the design intent, finished with duco Paint of approved shade. The box shall be designed with support structure to hold the weight. Dimensions may vary as per design requirements. The item includes all the necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes etc to do the required work is in the scope complete as per direction of Engineer-in-Charge. Overall Size: 1500mm x 750mm x 1050mm

Provision & fixing of high quality 3M/LG vinyl prints on Wall Paneling (ply/mdf/hdhmr) (flat/curved) with matte lamination; surface to be treated with tty and paint to make suitable surface for pasting the vinyl.

Provision and fixing of a kiosk with a 850mmx500mm base and 850mm height, fabricated to house a 22inch tv. The kiosk shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with PU Paint. The unit shall be designed with provisions for mounting a 22inch TV and support structure to hold the weight. Dimensions may vary as per design requirements. The item includes all the necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes etc to do the required work is in the scope complete as per direction of Engineer-in-Charge.

Provision and fixing of logo cutout on 18-25mm thick HDHMR panels and finished with pvd coating. Item to include necessary hardware and accessories for mounting of the letters to achieve the desired look as per satisfaction of the engineer in charge.

Providing and fixing of 18mm thick HDHMR BOARD cladding as approved over wooden frame in teak wood as approved wood of size 50mm x 50mm under frame work in sections at 600mm vertically/horizontally and as where required for proper completion of job affixed to the wall by means of raul plugs /screws . The cost includes labour, materials, wastages, hardware, lead, lifts, cutting to all shapes ,fixing at all loations and levels, PU paint of required cloor etc. complete as per the instructions of Engineer-in charge.

Provision and fixing of a 150mm high platform constructed with hardwood framework of appropriate size and thickness. The top and sides of the platform shall be covered with 19mm thick BWP (Boiling Water Proof) plyboard. The platform size will be measured in square meters (sqm). The platform should feature a smooth and even finish on all surfaces, with adequate cross-bracing and supports for stability. It should be floor-mounted with appropriate anchoring and include a non-slip surface for safety. The platform shall be finished in floor finish and PU paint as per design. All materials and workmanship should comply with relevant industry standards and regulations. Item to include all necessary equipments and hardware required to achieve the desired effect as per satisfaction of the engineer in charge.

Provision and fixing of scaled model made out of various materials like paper, plastic, pop, etc. and finished as per design to match the design intent. Item to include any hardware and extra provisions required for installation adhering to structural stability. The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope. Quantity to be measured in terms of area covered on top.

Providing and fixing of artistic set as per design. Item to include finishing and furnishing the area with various props suitable with the theme, made out of various materials such as POP, FRP, Cloth, Mesh, Wood, Silicon, Glass, Metal etc. as per theme. The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope.

Providing and fixing of Reception counter of size 2400mm(L)x600mm(W)x750mm(H) made out of 18mm thick ply, finished in 1.5mm thk laminate from all the exposed sides, top to be finished in 6mm thk solid acrylic surface, edges to be finished with edge bending tape of similar shade including PU paint if required. The item shall be Inclusive of all hardwares and storage pedestal as specified in design. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads complete to the satisfaction of engineer in-charge.The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope.

Providing and fixing of Souvenir counter of size 2450mm(L)x600mm(W)x750mm(H) made out of 18mm thick ply, finished in 1.5mm thk laminate from all the exposed sides top to be finished in 6mm thk solid acrylic surface, edges to be finished with edge bending tape of similar shade. The item shall be Inclusive of all hardwares and storage pedestal as specified in design. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads complete to the satisfaction of engineer in-charge.The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope.

Providing and fixing of TV COVER with mounting mechanism to house a 55 inch wall mounted tv and shall be made out of 18mm thk HDHMR board and finished in PU Paint. The item includes all the necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes etc to do the required work is in the scope complete as per direction of Engineer-in-Charge.

Providing and fixing of edge lit ,emergency exit sign with 2 hrs power back up, concealed in false ceiling,of PROLITE AUTOGLO make or equivalent LED EXIT LIGHT (Exit at Stairs entry/ Deptt. Exit)

Non-Illuminated Sign (in Aluminium Plate) Providing and fixing plate type graphics sign complete as per technical specifications and signage schedule, screen printed (Latex Printing) on photoluminescent U-1000 Aluminum sheet of 1.0mm (10% containing Lumigen-III as base chemical covered under ultra-violet stabilized coating (Glo-lite or equivalent make) of required sizes and shapes, including corners and edges properly rounded and dressed. Item to include fixing to RCC / Wall surface / Steel doors as required with the stainless steel counter- sunk cross-headed screws of required length and diameter including providing necessary washers, PVC / Rubber spacers etc. or fixed with 25mm wide VHB tape of 3M/equivalent make as approved by engineer-in-charge. Item to include providing and fixing of signages i.e. fixing on wall / ceiling / panel complete in all respects and as directed by Engineer-in- Charge. PHOTOLUMINESCENT, ESCAPE SIGN

Non-Illuminated Sign (in Aluminium Plate) Providing and fixing plate type graphics sign complete as per technical specifications and signage schedule, screen printed (Latex Printing) on photoluminescent U-1000 Aluminum sheet of 1.0mm (10% containing Lumigen-III as base chemical covered under ultra-violet stabilized coating (Glo-lite or equivalent make) of required sizes and shapes, including corners and edges properly rounded and dressed. Item to include fixing to RCC / Wall surface / Steel doors as required with the stainless steel counter- sunk cross-headed screws of required length and diameter including providing necessary washers, PVC / Rubber spacers etc. or fixed with 25mm wide VHB tape of 3M/equivalent make as approved by engineer-in-charge. Item to include providing and fixing of signages i.e. fixing on wall / ceiling / panel complete in all respects and as directed by Engineer-in- Charge. PHOTOLUMINESCENT, ROOM EVACUATION PLAN

Non-Illuminated Sign (in Aluminium Plate) Providing and fixing plate type graphics sign complete as per technical specifications and signage schedule, screen printed (Latex Printing) on photoluminescent U-1000 Aluminum sheet of 1.0mm (10% containing Lumigen-III as base chemical covered under ultra-violet stabilized coating (Glo-lite or equivalent make) of required sizes and shapes, including corners and edges properly rounded and dressed. Item to include fixing to RCC / Wall surface / Steel doors as required with the stainless steel counter- sunk cross-headed screws of required length and diameter including providing necessary washers, PVC / Rubber spacers etc. or fixed with 25mm wide VHB tape of 3M/equivalent make as approved by engineer-in-charge. Item to include providing and fixing of signages i.e. fixing on wall / ceiling / panel complete in all respects and as directed by Engineer-in- Charge. PHOTOLUMINESCENT SIGNS, FIRE EXISTINGUISHERS

Providing and Fixing as per Design,Custom made sand stone plaque signage design complete with civil works. Tentative Size to be 450mm wide and 750-900mm tall as per detailed design. Construction of sign: Signage to be made out signle peice 25-40mm Sandstone. Front stone will be 3-5mm 'V' groove cnc engraved with black epoxy filled with museum name/logo and description as approved. The Signage to be installed on concrete foundation (to be casted as required) as per approved structural drawing. Signage to be fixed on RCC foundation using Hilti/Fischer nut bolts and chemical fasteners etc and complete to the satisfaction of engineer in-charge.

SS Face Plate Type Signage Providing and Fixing face mounted face plate type of signage made out of SS 304 grade sheet minimum 2mm thick, etched/Special effect film to designed graphics and screen printed with colours as per design in required colour on the face side and protected with with 3M Special effect film (as approved by engineer-in charge) as per design complete pasted with 3M-VHB 25mm wide 2.3 mm thick tape or fixed with SS screws / anchor fasteners with SS head caps with fixing mechanism and accessories as required all complete as per detailed specification and as approved by the engineer-in-charge.

Tour Taxi (i.e. Sedan type four wheeler- four seater)Jaipur to Mandore and return including toll tax, driver expenses (Food, Night Stay, misc.) including GST and other misc. taxes and charges.

Providing and fixing tall boy type pillar cock (hindware, jaquar make) with all fittings

Recovery of old sanitary fittings (Bib Cock, Pilar Cock, Angle Valve, N.R.V. Sanser Cock etc.

Recovery of old G.I. Pipe 15-50 mm dia.

Placing of coin, antiquties, sculpture, paintings, musical instruments etc. in showcases/pedestals including required hardware, accessories, acrylic sheet of required thickness carpenter, helper etc. complete work as per direction of Engineer Incharge.

ANUPAM BUILDERS (BID ID -3028972)

ANUPAM BUILDERS (BID ID -3028972)