Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.8 LAccepted-AOC NEAR S B O P WARD NO 1 SURDULGARH MANSA | SURDULGARH | MANSA | L1 | Accepted-AOC L1 | |
| 2 | L2₹24.0 L+₹21,404 (0.90%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹25.0 L+₹1.2 L (5.20%)Rejected-Finance CC III 28A JANTA BHAWAN ROAD SIRSA HARYANA 125055 | SIRSA | HARYANA | 125055 | L3 | Rejected-Finance Other than L1 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
26 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Sirsa
GE (AF) Sirsa-125055
Welcome Maint to Offrs Accn at AF Stn Sirsa
2023_MES_598455_1
GE/SRA/T-15/2023-24
Open Tender
Miscellaneous Works
Item Rate
210 days
GE (AF) Sirsa
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) Sirsa
₹50,000
Yes
14 Jul 2023
27 May 2023
27 Jun 2023
27 May 2023
26 Jun 2023
8 Jun 2023
29 May 2023 - 3 Jun 2023
Amount
Taking down damaged/unserviceable Steel/PVC Chowkat or Frame not exc. 1.50 Sqm Each with shutter (without taking off shutter from the frame) and remova; from site complete all as specified and as directed.
Taking down damaged/unserviceable Steel Chowkat or Frame exc. 1.50 Sqm but not exc. 4.00 Sqm Each with shutter( without taking off shutter from the frame) and removal from site complete all as specified and as directed.
Taking down Shutters of any description exc 1 sqm and not exc 2.00 Sqm each and removal from site complete all as specified and directed.
Taking down existing switch board cover along with switches, sockets, regulator etc, to facilitate the tiling work and re-fixing the same on existing switch board with new hylam sheet & screws complete including concealing the open batten wiring wherever required on the site complete all as specified and directed.
Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
M&L Cement Concrete 1:3:6 (12.5mm graded stone aggregate) as in Filling Back side of Chowkats, complete all as specified and as directed.
M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick in Sub-base for laying/fixing of Tiles in Floor, complete all as specified and as directed.
Demolition Cement Concrete (Reinforced) of Roof, Floor (other than Ground Floor) Beam, Staircase, Landings, Chajjas and similar work (reinforcement cut as required to facilitate demolition) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
M&L Reinforced Cement Concrete 1:2:4 (12.5mm graded stone aggregate) as in Shelves, Chajja, Facia, Sunshade and Similar Items including Form work (as required) and smooth finishing at Top side using extra Cement, complete all as specified and as directed. (NOTE: MS reinforcement shall be measured and paid seperately)
Demolition Brick work built in cement mortar and in any Position including all Quoins, Arches and Pillars, etc. And removal of debris from site complete all as specified and as directed.
M&L for Brick Work with Fly-Ash Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.
M&L Brick work using Serviceable Bricks obtained from Item No. 10 here-in-before including removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in cement mortar 1:6, complete all as specified and as directed.
M&L Cutting Holes in Brick Walls, exc. Half Brick thick but not exc. One Brick thick, built in CM for inserting of Cooler Stand, Lugs and Making Good to dismantled portion with Cement Concrete 1:2:4 (20mm graded stone aggregate) or CM 1:3 (as required) and adjoining Surfaces in CM 1:4, complete all as specified and as directed.
S&F Pressed Steel Frame of size 105x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.
S&F Pressed Steel Frame of size 125x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.
M&L Panelled Shutter 35mm thick of Second Class Hardwood with Panels of 12mm thick Veneered Particle Board medium density wood with commercial face veneered both side and fitted to Chowkats, having size of Rail and Stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.
M&L Glazed and Skeleton Shutter 35mm thick of Second Class Hardwood prepared to receive Gauge/Glass (without Sash Bars) fixed with mitred beeds supplied and fitted to Chowkat and securing Glass, Gauge, etc. sizes of Members of Shutter as specified in SSR Part-I, Section-8, Clause 8.24(a), complete all as specified and as directed.
Taking down Shutter of any description exc 1.00 Sqm and not exc. 2.00 Sqm Each and Refixing in the Same Opening, after resecuring or easing and adjusting, etc., complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50x47 mm made out of 5.0mm having Wood Grain Printed PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening, complete all as specified and as directed.
M&L Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) Plain colour (Ivory shade) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded wood grain PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Wood Grain PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either Side and as gap insert for Top Rail & Bottom Rail, Panelling of Wood grain PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable 5mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and decorative PVC Beading of 10mm x 10mm (90°) and jointed together with Solvent Cement and fixing in the Frame and hanging/fixing with and including Stainless Steel Hinges, complete all as specified and as directed. NOTE : Stainless Steel Hinges will be Measured and Paid under appropriate Item.
Taking down aluminium window of any description not exc. 2.00 Square Metre Each and Refixing in the Same or other Opening, after resecuring or easing and adjusting, including jointing cleats and necessary fittings, complete all as specified and as directed.
Dismantling damaged/unserviceable Frame of Aluminium Doors, Windows, Ventilators and Partition, etc. of any description, complete all as specified and as directed.
M&L Aluminium anodised Frame for Doors, Windows, Ventilators, Partitions, etc. having Powder Coating (minimum thickness of Powder coating 50 micron) with one or more rebates including Joining Cleat for fixing, etc., complete all as specified and as directed.
Taking down Steel Window, Ventilator Frame (without taking off Shutter from the Frame) of any description including Guard Bars/ Grill, not exc. 1.00 Square Metre Each, complete all as specified and as directed.
Taking down Steel Window Frame (without taking off Shutter from the Frame) of any description including Guard Bars/ Grill, exc. 1.00 Square Metre but not exc. 2.00 Square Metre Each, complete all as specified and as directed.
S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and as directed
Dismantling damaged/unserviceable Shutter of Aluminium Doors, Windows and Ventilators of any description, complete all as specified and as directed.
S&F Aluminium anodized Powder coated Window Double Shutters Glazed and Gauged of Stainless Steel Wire Cloth having nominal dia of Wire 0.36mm and average width of aperture 1.40mm along with Aluminium Section with 50 micron anodizing size of Frame 125x44.5mmx16 gauge size of Shutter, Top, Bottom and Side Rail 44.5x44.5mm x16 gauge Aluminium Section with 50 micron anodizing and 5.5mm thick Black/ Tinted Sheet Glass to be fixed on Glazed Portion including Aaluminium Grill and Stainless Steel Hooks and Eye to be provided as stay of Shutters, etc. complete including necessary Jointing Cleats, Glazing Clips, Rubber Packing, Aluminium Snap Beading, Screws anodized Aluminium Fittings such as Peg Stay 150mm long (1 No. for each Leaf), Hinge Type B-21 of 100mm long (2 No. for each Leaf), suitable Handle (1 No. for each Leaf) and 100mm Aluminium Tower Bolts (2 No. in each Leaf), complete all as specified and as directed. NOTE : Cost of Black/Tinted Sheet Glass, Stainless Steel Wire Cloth, Jointing & Packing Materials, anodized Aluminium Fittings, etc. shall deem to be include in the Quoted Unit Rate.
S&F Aluminium Anodised Powder coated Door Shutter with Frame 101.40x44.45mm having size of Long Rails/Style, Top and Middle/ Centre Rail shall be 84.40x44.45mm and Bottom Rail shall be 110x44.45mm of Aluminium Sheet shall be 16 gauge, Panels shall be provided with 5.0mm thick Sheet Glass and with 12mm thick PVC Sheet best quality (as approved), Jointing Cleats and Fixing Accessories including Locking Arrangement, fixed with Hinges to the Frame or Slididng Type or Pull & Push Type Shutters including Glazing Clip, Rubber Beading, Aluminium Handle of size 150mm (2 No.), Mortice Lock of size 100 mm MS 4- lever (1 No.) and all necessary Fittings and Fixtures¸ complete all as specified and as directed.
M&L Steel Window Box type using ERW ‘P’ Section comprising Double Frame for Gauged and Glazed Skeleton Shutters, having Outer Frame of Section 50x25mm and Inner Frame of Section 40x20mm, jointed internally with Mild Steel Flat Iron 40x3mm complete with Stainless Steel Tower Bolts, Hinges, Handles, Stops, Lugs, etc. including Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm, etc., complete all as specified and as directed. NOTE :- (a) For the purpose of Measurement and Payment Double Shutters with Frame shall be considered as ONE UNIT. (b) Unit Rate quoted shall deem to be include all the Stainless Steel Builders & Hardware as required/directed at Site. (c) Quoted Unit Rate shall also deem to be include Mild Steel Guard Bars of 10mm Square Bar, spacing at 10 Cm centre to centre on both Vertical & Horizontal directions. (d) Sheet Glass shall be Measured and Paid for separately under appropriate Item.
M&L Taking down existing Steel Rolling Shutter including Hood Cover, Pull and Push type, area not exc. 8.0 Sqm Each, Sides of clear Opening and Cleaning the Side of Shutter Suspension Shafts, Anti-guide Channels and Greasing all the Moving Parts of the Rolling Shutter and straightening Rolling Shafts and replacement of Bolts, Nut, etc. as required for Smooth Functioning of Shutter and Re-fixing the same including Hood Cover, complete all as specified and as directed.
S&F Aluminium Barrel Tower Bolt 150mm long (weight not less than 130 Gram), extruded section, complete all as specified and as directed.
S&F Aluminium Barrel Tower Bolt 200mm long (weight not less than 210 Gram), extruded section, complete all as specified and as directed.
S&F Aluminium alloy, anodized, Sliding Door Bolt 250mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet cast or extruded section and fixing Bolts and Sliding Bolts of extruded section and fixing, complete all as specified and as directed.
S&F Butt hinges,100 mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised , type B-21 and fixed, complete all as specified and as directed.
S&F Extruded Aluminium alloy Handle 100mm long (weight not less than 100 Gram), Fabricated type, anodised, complete all as specified and as directed.
S&F Extruded Aluminium alloy Handle 150mm long (weight not less than 120 Gram), Fabricated type, anodised, complete all as specified and as directed.
S&F Door Spring of Mild Steel 150mm long, Ordinary Rat Tail type, Rod patteren Springs including Roller and Roller Plate welding with frame , etc., complete all as specified and as directed.
S&F Mild Steel Mortice Lock 100mm in size, 4-Lever, Vertical type, complete all as specified and as directed.
S&F Door Closer Aluminium (Die Cast) Body, hydraulically regulated, Designation No. 3, Universal type, suitable for Door Shutters of 851mm to 1000mm in width and of weight between 61.00 to 80.00 Kilogram, complete all as specified and as directed.
S&F Double Action Floor Spring hydraulically regulated made up of minimum 1.25mm thick Aluminium alloy Sheet Foundation Box, Main Body with Stainless Steel Cover, Governing Pivot made of Brass, other Parts made of Mild Steel heavy duty, complete all as specified and as directed.
Drilling of hole not less than 25mm dia in Granite for passage of gas pipe etc complete all as specified and as directed.
S&F Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw, complete all as specified and as directed.
S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, etc. and fixed complete all as specified and as directed.
S&F in repair Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, etc. and fixed-in-repairs, complete all as specified and as directed.
Hacking out old broken Glass (any thickness, size, quality or description) from Metal Frames, glazed with putty or fixed with beads, complete all as specified and as directed.
S&F Sheet Glass 4.0mm thick, Ordinary quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane, complete all as specified and as directed.
S&F Figured Glass 4.0mm thick, Pin Head type and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane, complete all as specified and as directed.
S&F Sheet Glass 5.0mm thick, Tinted (as approved by GE) fixing to Aluminium Window including replacement of Rubber Packing and refixing Aluminium Beading, complete all as specified and as directed. NOTE : Cost of Rubber Packing shall deem to be include in the Quoted Unit Rate.
S&F Sheet Glass 4.0mm thick, Frosted (as approved by GE) fixing to Aluminium ventilator including replacement of Rubber Packing and refixing Aluminium Beading, complete all as specified and as directed. NOTE : Cost of Rubber Packing shall deem to be include in the Quoted Unit Rate.
M&L TMT Bars 8.0mm dia, cut to length bent to shape required including cranking, bending spirally for hoping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia or securing with Clips, complete all as specified and as directed.
S&F in repair Non-asbestos Fiber Cement Building Boards 6.0mm thick, fixed to Walls with Rawl Plugs and Steel Screws, and fixed-in-repairs, and applying Two Coats of Acrylic Distemper (as approved) over a Coat of 1.5 mm thick wall care putty for priming the surface complete all as specified and as directed.
Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
M&L for dismantling floor tiles alongwith screed bed, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Non-skid/matt finish Ceramic tiles, coloured, joint free, 7 to 8 mm thick (Square/rectangular), area of each tile exceedig 0.11 Sqm but not exceeding 0.18 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the tiles, laid over and including Screed Bed 15mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
-ditto- but for Vitrified Ceramic Tiles, 9-10mm thick (Square/ Rectangular), coloured, Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
-ditto- but for vitrified tiles in skirting, fixed over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
M&L for taking down wall tiles alongwith screed bed, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Coloured/Printed Glazed Ceramic Tiles, 450x300x7mm thick in Vertical Surfaces i.e. Dado, Skirting, etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, fixed over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:3, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
M&L Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Granite (of any type) Tiles, 18-20mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing, laid over and including 20mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
-ditto- but for Granite (of any type) Tiles, 18-20mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing, fixed over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:3, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
M&L Rendering (Internal) 15mm thick in cement mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L Rendering 5.0mm thick in cement mortar 1:3 on Concrete Surfaces of Ceilings, Plastered Surfaces finished Fair and Even, complete all as specified and as directed.
M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the Ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed.
M & L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid seperately as "Supply only".
Supply only Integral Water Proofing Compound, ISI Marked, as approved, complete all as specified and as directed.
M&L preparing old Plastered surfaces of Walls and applying a Coat of White Wash, complete all as specified and as directed.
M&L preparing newly Plastered surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.
M&L preparing old Plastered surfaces of Ceiling and applying a Coat of White Wash, complete all as specified and as directed.
M&L built in steel cup board with pressed steel frame of size 75x45x1.25 mm thick with pressed steel shutter 1.00 mm godrej pattern fixed to masonry wall by hold fast made out of 25x3 mm thick flat iron incl MS hanging rod of 10mm dia with bracket fixed on inner side of cup board shutter and on other leaf provision of MS peg set of 03 including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around steel surfaces of frame and shutter including taking down old existing wooden cup board and making good disturbed portion in CM(1:3) or PCC 1:2:4 all as directed .
M&L preparing new Plastered surfaces of Walls by applying 1.5mm Wall Putty including Rubbing down with Sand Paper to obtain a Smooth Finish Surface and applying Two Coats of Acrylic Distemper (as approved) over a Coat of Primer with rollers, complete all as specified and as directed.
M&L preparing old Distempered surfaces of Walls including filling the existing Nails/Screw Holes, etc. and applying a Coat of Acrylic Distemper (as approved), complete all as specified and as directed.
M&L preparing old Distempered surfaces of Walls by Complete Removal of existing Treatment and applying 1.50mm thick Wall Putty, Rubbing down with Sand Paper to obtain a Smooth Finish Surface including filling the existing Nails/ Screw Holes, etc. and applying Two Coats of Acrylic Distemper (as approved) with rollers, complete all as specified and as directed.
M&L preparing newly Plastered surfaces of Walls by applying Wall Putty, cutting/rubbing to obtained a Smooth Surface and applying Two Coats of Weather Proof Exterior Emulsion Paint (Plain pattern) with approved Tint over a coat of appropriate Primer (as per Manufacturer's instructions), complete all as specified and as directed.
M&L preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of Weather Proof Exterior Emulsion Paint (Plain pattern) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.
M&L preparing new Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete all as specified and as directed.
M&L preparing old decorated/painted Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.
M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
M&L preparing old Treated/Painted Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.
M&L preparing old decorated/treated Wooden Surfaces of any description, width or girth including cleaning and applying one or more Coat(s) of French Polishing including a coat of Wood Filler on old Work, complete all as specified and as directed.
Taking up or down Steel Tubing 15mm bore (dia) with Fittings/ Connections, segregating Serviceable Pipes and Fittings/ Connections and keep in Safe Custody for re-use, complete all as specified and as directed.
M&L Galvanised Tubes 15mm bore (dia), 'medium grade', with all Fitting and fixed complete to Walls and Ceilings or laid in Floors, complete all as specified and as directed.
Refixing Steel Tubing 15mm bore (dia) and Fittings in new or old position, (Serviceable Pipes and Fittings obtained from Item No. 91 here-in-before) after cleaning inner and outer surfaces of Pipes by using of Wire Brush including provision of new GI Fittings (as required), complete all as specified and as directed.
Taking up or down Steel Tubing 20mm bore (dia) with Fittings/ Connections, segregating Serviceable Pipes and Fittings/ Connections and keep in Safe Custody for re-use, complete all as specified and as directed.
M&L Galvanised Tubes 20mm bore (dia), 'medium grade', with all Fitting and fixed complete to Walls and Ceilings or laid in Floors, complete all as specified and as directed.
Refixing Steel Tubing 20mm bore (dia) and Fittings in new or old position, (Serviceable Pipes and Fittings obtained from Item No. 94 here-in-before) after cleaning inner and outer surfaces of Pipes by using of Wire Brush including provision of new GI Fittings (as required), complete all as specified and as directed.
S&F in repair Chromium plated brass Bib cock with wall flange (premium range), fancy type, short body, fixed to 15 mm bore of Iron pipe complete all as specified and directed.
S&F in repair Chromium plated brass Bib cock with wall flange (premium range), fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed.
S&F in repair 15mm bore chromium plated two way bib cock with flange (premium range), fancy type complete all as specified and as directed.
S&F in repair angle valve (premium range), 15 mm bore, cast copper alloy, chromium plated fancy type, concealed type with wall flange fixed to iron pipe complete all as specified and directed.
S&F in repair Chromium plated brass two way Angular stop cock (premium range), fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe, complete all as specified and directed.
S&F in repair Chromium plated brass Pillar tap, fancy type. with areator (premium range), fixed to wash hand basin, complete all as specified and directed.
S&F in repair Gun Metal Gate Valve 15mm bore (dia) with Iron Wheel Head including Flange, screwed both Ends for Iron Pipe ,complete all as specified and as directed.
S&F in repair Gun Metal Gate Valve 20mm bore (dia) with Iron Wheel Head including Flange, screwed both Ends for Iron Pipe ,complete all as specified and as directed.
S&F in repair Chromium plated brass Wall mixer (premium range), concealed type, with concealed body, with overhead shower arrangement fixed with 15 mm bore Iron pipe complete all as specified and directed.
S&F in repair Chromium plated brass Wall mixer (premium range), concealed type incl concealed body, with both overhead and telephone shower arrangement, fixed with 15 mm bore Iron pipe complete all as specified and directed. NOTE: Telephone shower shall be measured and paid seperately.
S&F in repair fancy type chromium plated telephonic hand shower (ABS Body), multiflow type with flexible tube and hook screwed for iron pipe (premium range) including frame complete all as specified and directed.
S&F in repair 15mm bore chromium plated single lever central hole basin mixer (premium range) without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed.
S&F in repair 15mm bore chromium plated sink cock (premium range), swivel casted spout (wall mounted model) complete all as specified and as directed by Engineer-in-charge
S&F in repair Rotational Moulded Polyethene Water Storage Tank, 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS, hoisted and fixed in Position complete all as specified and as directed.
S&F in repair PVC Cover for Water Tank of capacity 500-1000 Ltr complete all as specified and directed by Engr-in-Charge.
S&F in repair 20 mm bore Ball brass valves, high pressure, with HDPE float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. (MAKE : PRAYAG, Cat No. B-152 or equivalent model in makes specified in tender)
M&L Cleaning and removing all Scales and dirts from the Tank and mouths of circulating Pipes, etc. after draining out Water from the Tank of capacity 500 Litre and not exc. 1000 Litre, cleaning the Tank by scrubbing the deposits with Wire Brush, re-fixing Inlet and Outlet Pipes in the Same Position and writing Letters "CLEANED ON DD.MM.YYYY" (i.e. Date of Cleaning of Tank) not exc. 50mm in height, complete all as specified and as directed.
S&F in repair Vitreous China White Squatting Pan of size 580x440mm, 'Orissa' Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces, complete all as specified and as directed.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK / ESSSCO, Cat No: ECS-WHT-551SSPP)
S&F in repair vitreous china floor mounted one piece closet (Pedestal pattern), white including vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC soft close seat cover and connecting fittings complete all as specified and directed. (Make : CERA, Model: CHAMP / PARRYWARE, Model: Entice / HINDWARE, Model: FLORA / ASIAN PAINTS, Model: IMMERSE / ESSCO, Cat No: AIS-WHT-101851S220SPPSM )
S&F in repair Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device and complete all as specified and as directed. NOTE: This item shall only be measured for existing EWC
S&F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART /ESSCO, Cat No: WHE-WHT-183NL)
S&F in repair Jet Spray with Connection Pipe 15mm bore (dia), Brass Chromium Plated and suitable for Wash Down Water Closet Pan (Pedestal Pattern) , complete all as specified and as directed. (Make : Essco, Cat No ALE-547/PRAYAG, Cat No: BEA-17 or equivalent model in other makes specified in tender)
S&F in repair chromium plated Hand shower (health faucet), ABS body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed.
S&F in repair Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0406 / HINDWARE, Cat No. 10010 / CERA, Cat No: S2040141 / ESSCO, Cat No: ECS-WHT-801)
S&F in repair PVC Waste Pipe 32mm bore (dia) having 60 - 75 Cm long (as required at Site) , complete all as specified and as directed.
S&F PVC Connection Pipe 15mm size and 60 Cm in length with Adopter Nuts of PVC, complete all as specified and as directed.
S&F in repair chromium plated brass over head shower rose with arm (premium range), with 3 flow, fixed to 15mm bore of iron pipe complete all as specified and directed.
S&F in repairs, Tubular towel rail (premium range), 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed.
S&F in repairs towel rack (premium range) without lower hangar with hook complete all as specified and directed.
S&F in repair Chromium plated brass Towel ring (premium range), round, complete all as specified and directed.
S&F in repairs toilet paper holder, surface type with flap (premium range) complete all as specified and directed.
S&F in repair stainless steel peg set of four of best quality complete all as specified and as directed.
S&F in repair acrylic bathroom cabinet box with mirror of size 622 mm X 422 mm size complete all as specified and directed. (MAKE: PRAYAG, Cat No: 555 or equivalent model in POLYTUF / JEXON / SHAKTI / NILKAMAL )
S&F in repair Glass Shelf (Bath Tray) Accessories 45x15 Cm in size , complete all as specified and as directed.
S&F in repair Corner Glass Shelf single Decker (Triangular shape) of size 30 Cm, complete all as specified and as directed.
S&F in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen with plug washers, waste coupling, PVC waste pipe and fixing cantilever brackets connecting union to pipe, overall size of sink 914 mm x 460 mm and bowl size 405 mm x 354 mm x 203 mm complete complete all as specified and directed. (MAKE : CERA, Cat No: B4512201 /PRAYAG, Cat No. 1339D / PARRYWARE, Cat No: C855099 or equivalent model in NIRALI / ANJALI / JAYNA) (NOTE: Waste pipe shall be measured and paid seperately)
S&F in repair Stainless Steel Plate Rack 75x75x25 Cm in size, made out of Stainless Steel l.0mm thick with all Internal Fittings and fixing with Brass Chomium Plated Mild Steel Screws , complete all as specified and as directed.
S&F in repair Grating 100mm dia in size, Chromium Plated (as approved) , complete all as specified and as directed.
S&F in repair PVC (SWR) 75 mm floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F in repair PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints fixed to floor , complete all as specified and as directed.
S&F in repairs PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls, complete all as specified and as directed.
S&F in repairs PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls, complete all as specified and as directed.
S&F in repair PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints fixed to Walls, floor, complete all as specified and as directed.
S&F in repair PVC (SWR) 75mm bore (dia), Bend any type, provided with Access Door, etc. and jointing with Solvent Cement , complete all as specified and as directed.
S&F in repair PVC (SWR) 110mm bore (dia), Bend any type, provided with Access Door, etc. and jointing with Solvent Cement , complete all as specified and as directed.
S&F in repair 18-19 mm thick PVC Board Scratch and strain free (weight not less 9 Kg/Sqm) in Kitchen Cabinets (shelves ,doors etc) , one side laminated , jointed by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws, including providing & fixing of Stainless steel L shaped hinges suitable for PVC Board (minimum of 02 Nos for Each leaf ) to hold cabinet door , Stainless Steel Silver chrome Door Handle 100mm long (01 No for each leaf of shutter), complete all as specified and as directed. NOTE: Quoted unit Rates are inclusive of PVC board, handles, hinges, screws etc.
S&F in repair stainless steel Cup and Saucer basket of size(370x485x100mm) and fitted to a telescopic drawer channel and PVC celuka Ply board with smooth movement . Make : Godrej (Product Code : 6129) or equivalent in HETTICH/OZONE/EBCO/HAFFLE
S&F in repair stainless steel Perforated Cutlery basket of size(370x485x100mm) and fitted to a telescopic drawer channel and PVC celuka Ply board with smooth movement, complete all as specified and as directed. Make : Godrej (Product Code : 6132) or equivalent in HETTICH/OZONE/EBCO/HAFFLE
S&F in repair 500 mm telescopic drawer channel fitted to celuka Ply Board and stainless steel basket for smooth movement, complete all as specified and as directed. Make: Godrej (Product Code : 5919) or equivalent in HETTICH/OZONE/EBCO/HAFFLE
S&F in repairs Frame made out of 18 guage stainless steel sheet,moulded to shape to retain Name plate and fixing it on brick gate pillers with 4 nos stainless steel screws of 30 mm long with Rawl plugs,complete all as specified and as directed.
M&L for Name Plate 4.0 mm thick Acrylic sheet of size and direct inserted into steel frame including writing Name,Quarter No.,etc including taking down existing,complete all as specified and as directed.
Repairing of Aluminium Door, Windows, Ventilators Shutter Fixed/ Side Hang, Sliding Type/Partition including taking down, refixing with minor adjustment for opening and closing properly with replacement of necessary Jointing Cleats, Glazing Clips, Rubber Neoprene Packing, Aluminium Snap Beading, Screws, etc. and repairing of Locking Arrangement if any, complete all as specified and as directed. NOTE : Quoted Unit Rate shall deem to be include Jointing Cleats, Glazing Clips, Rubber Neoprene Packing, Aluminium Snap Beading, Screws, etc. required/ordered at Site.
M&L for MS Door packing Strip sliding type complete, all as specified and as directed.
S & F in repairs for waste coupling chromium plated for sink of 40mm dia including fixing, suitable for 32mm dia waste pipe complete and all as directed by Engineer-in-Charge.
S&F in repair heavy duty half/full, Spindle suitable for bib Tap, concealed stop cock, angle valve of 15 mm bore (dia) , Cast Copper alloy, complete all as specified and as directed.
M/s Har Nandi Construction Company
M/s Satguru Traders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .