Construction of Medical College 100 Admission Phase 1st

Amount

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. a.2.27.1 Beyond 30 cm girth upto and including 60 cm girth.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil complete job.

SOLING Providing and laying of hand packed stone soling (size 150mm-230mm) before laying of mud mat compacted consolidated rammed filling the voids compacting all complete carriage upto site of work all head loads complete job.

MUDMAT Cast in situ of concrete work of nominal mix concrete M7.5 grade (1:4:8) nominal maximum size of stone aggregate 40mm volumetric batching up to plinth level including curing but excluding formwork costs complete job.

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete job.

PCC Cast in situ of concrete work of nominal mix concrete M15 grade (1:2:4) nominal maximum size of stone aggregate 40mm volumetric batching up to plinth level including curing but excluding formwork costs. complete job. BELOW GROUND LEVEL

ABOVE GROUND LEVEL

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete.50 mm thick with 20mm nominal size stone aggregate complete job.

Supplying and filling in plinth with fine GSB/Nallah Muck under floors including,watering, ramming, consolidating and dressing complete job.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m complete job.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge complete job. All works upto plinth Level

All works above plinth Level

Form work of steel plates not less than 3.0mm thick M.S. sheets of specified size stiffened with suitable structural frame work true to plane or Kit-ply plates of not less than 12mm thickness of specified sizes stiffened with a suitable timber frame work prop height up to desired height in foundation, plinth beams, all types of suspended floors, soffits of slabs, sloping areas, sides and sofits of beams ribs, columns posts, pedestals, up to desired heights and thickness complete including its removal complete job. Raft

Foundation beams

Columns

plinth beams

floor beams

Slab edges

Add 15% for staircase and secondary beam

Solid slabs

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more brand of steel must be SAIL.complete job.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and above plinth upto floor V level including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)complete job.

Half brick masonry with F.P.S. bricks of class designation 75 in superstructure upto floor V level in Cement mortar 1:4 (1 cement :4 coarse sand) including cost and carriage of all materials involved upto site of work complete job.

PLASTER WORK 12 mm thick cement plaster on ceilings, etc. in (1 cement: 4 fine sand mix). Upto floor V level complete in all respects (including cost of all material, leads, lifts and carriages etc. upto site of work complete) complete job.

6 mm cement plaster of mix 1 : 3 (1 cement : 3 fine sand) on ceiling and soffits of stairs up to any level of mix 1:3 (1 cement: 3 fine sand).complete job.

Providing and fixing plannes eaves boarding (300mm x 40mm )( nominal size) second class dewdare wood fixed with screws etc, including all carraiges .All job completed.(SSR2020)12.69.1.2

P/F of 19mm thickness soffit of budloo wood specifications. Including jam work(1.5”x3” of budloo wood) underneath including painting polishing complete.complete job.

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.complete job.

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gram/m complete job.

Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.1.60 mm thick with zinc coating not less than 350 gram/m2 complete job.

Supplying and erecting welded steel built up or rolled sections in trusses/trussed purlins /beams/rafters up to desired span and height confirming to specified code including cost of priming coats. complete job.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry bricks 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth complete job.

Providing and fixing Granite of any colour or shade gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias,staircases and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.(SSR2020)( 8.2.2)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. Size of tile 600x600 mm complete. (code no. 11.52.2)

Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete job.

Providing and fixing of white marble flooring in rooms with 18mm thick granite stone(sample to be approved by the engineer I/C)laid over 20mm thick base of cement mortar1:4ratio(1cement:4coarse sand )laid and jointed with grey cement slurry including rubbing and polishing , moulding complete job as approved by the architect.complete job.

Providing and fixing of antiskid chaquered floor tiles in ramps of standard made ( Kajaria , Rak , Nitco in all colours and size & above as approved by the consultant laid on 20mm thick cement mortar in 1:4 ( 1 cement 4 sand) including the pointing the joint in white cement and matching pigments etc including cost of antiskid rubber strapping etc complete job.

Providing and finishing of walls and ceilings with Putty (2mm thick) to prepare the surface even and smooth complete in specified areas as per specified pattern.complete job.

Painting of internal walls and ceilings with two or more coats of emulsion paint of specified shade and quality (brand)to an even shade over and including priming coat,prepration of base surface with oil based filling, complete job

Painting with synthetic enamel paint including priming of approved brand and manufacture to give an even shade.complete job.

Providing and fixing paneling of buldoo wood 19mm thick incld the cost of frame work and 12mm ply frame work of budloo wood 2.5”x1.5” incld the cost of sandpapering polishing all complete job

15 mm thick cement plaster in 1:6 cement mortar in external walls using coarse sand with excel paint complete job.

Providing and Finishing of external façade with specified pattern of GRC Tiles of min 7mm thick including the cost of adhesive all complete job.

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm complete job.

Providing and laying vitrified wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. Size of tile 600x600 mm complete job.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete job.

Providing of devri stone flooring in courtyard avg 150 mm thick fine chiselled including the cost of cement motor with all carriage upto the site of the work

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class deodar wood

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.(first class deodar wood) (Note: -Butt hinges and necessary screws shall be paid separately).

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.(first class kail wood) complete job.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).complete job.

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 200x10mm complete job.

Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete :125 mm complete job.

Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., complete. Overall width 35 mm complete job.

Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm complete job.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as approved by the consultant approved drawing & direction of Engineer-in-Charge. Single / double glass panes, wire mesh and silicon sealent shall be included complete job. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).(SSR2020: 10.28)

Providing and fixing of hand rail of dewdar wood 3'' x 4'' section including the cost of fixtures ,moulding including painting polishing all compete job.

Providing under layer for plinth protection including preparation of ground 75mm thick (uncompacted) layer of dry stones aggregates well rammed including all carraige complete job.

Providing and fixing nordic panneling (for chajjas) 18mm thick T&G including the cost of jam work (Frame) of 1st class imported wood, minimum section 2.5'' x 1.5'' including the cost of painting and polishing with scaffolding, wherever applicable, as per the directions of the engineer incharge, complete job

Providing and fixing mild steel round holding down bolts with nuts and washer plate complete job.

Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning/ centering arrangement and support plates as per ASTM B221-02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063.) Wall Joint of 100 mm gap complete job. complete job.

Providing and fixing PPR pipes with clamps, teflon tape, etc., including cutting chases in brick masonary and cost of fittings (like sockets, tees, elbows, union, reducers, etc.) with carriage, complete job, as per approved by the consultant and the directions of engineer in charge.complete job.dia 32mm

dia 16mm

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (code no. 23.5)

Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing.Fine chisel dressed complete job.

P/F of devri stone moulding 3'' x 4'' as per the design of consultant including the cost of carriage all complete job.

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS:12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge.Pre-laminated particle board with decorative lamination on both sides. including all carriages from source to site etc omplete job.

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 8 mm thickness (weight not less than 20.0 kg / sqm) including all carriages from source to site etc omplete job.

Supply and fixing of various sizes of PVC conduits/Channels along with accessories in surface / recess including cutting the wall and making good the same in case of ressessed conduit as required 25mm dia

40mm dia

75mm dia

Supply and fixing of following way prewired double door TP&N MCB distribution Boards of sheet steel of Legrand / Havells / Hager/Siemens/L&T make for 415 Volts recess on walls and refacing of walls complete job with loose wire box, terminal connectors for all incoming and outgoing circuits, dully wired with suitable size , FRLS PVC insulated copper conductor upto terminal block , Tinned copper Bus , Bar, Netural link, earth bar, din bar, detachable=cable gland plate, interconnections, powder coated painted including earthling etc as required (but without MCB/RCCB/isolator) (Approved before installation) 8 way TPN with metal door

6 Way TPN with metal door

Supply and fixing of GI steel fan junction boxes of approved make (approved before installation)

Supply and fixing of steel lighting/Fire Alarm/CCTV etc junctions boxes of approved make (approved bfore instalation)

Supply and fixing of GI steel Boxes for heating / computer / Telephone ? LAN/AC Points etc on walls of required size at site (2-12 ways) of approved make and refacing of walls complete job (Approved before installation)

N S Associates PVt Ltd