SPECIAL REPAIRS TO BLDG NO P-50 AND PROVN OF CHAIN LINK FENCING AT BHUSAWAL MIL STN AND AT MOTALA VILLAGE UNDER GE(S) AHMEDNAGAR

Amount

Demoltion of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floor apron etc laid, bedded and pointed in any mortar.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

Taking down cement plaster on brick/ stone/ concrete wallls including raking out joints, hacking for key scrubbing down with water etc all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 150mm all as specified and as directed.

Taking down chowkats or frames with shutter (without taking out shutter from the frame), area n.exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking out shutter from the frame), area exc 1.5 sqm but not exc 4 sqm each all as specified and as directed.

Taking down shutters of any description, area exc 1 sqm and not exc 2sqm each all as specified and as directed.

Taking up or down 15mm bore existing steel tubing and connections complete all as specified and as directed

Taking up or down 20mm bore existing steel tubing and connections complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and removing the rubbish off the premises. complete all as specified and directed.

Resecuring or easing & adjusting without taking down shutters of any description, area exc 1 sqm and not exc 2 sqm each all as specified and as directed.

Resecuring or easing & adjusting without taking down shutters of any description, area exc 2 sqm each all as specified and as directed.

Excavating in trenches, n exc 1.50m wide and n exc 1.50m in depth; for foundations, etc. or for not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/ loose soil all as specified and as directed.

Excavating in trenches, n exc 1.50m wide and n exc 1.50m in depth; for foundations, etc. or for not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in hard/ dense soil all as specified and as directed.

Removing excavated soil to a distance exc 250m and not exc 500m and depositing where directed at a level not exc 1.50m above the starting point all as specified and as directed.

Removing excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soils all as specified and as directed

M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per specified and as directed. Note: (i) Minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable for WPC solid door/window frames. Variation in profile dimensions on plus side shall be acceptable without any extra cost to the department. (ii) M.S. hold fast/ lugs or SS dash fasteners shall be paid separately.

Mild steel work in small articles such as holdfasts

S&F Factory made single extruded WPC (Wood Polymer Composite)solid decorative flush/panel door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making rrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Notes : (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. (ii) Net Opening shall be measured for payment purpose. (iii) Area not exceeding 2.00 sqm each

S&F 100mm size SS butt hinges medium weight fixed with welding to existing MS preesed steel chowkat/shutter or fixed to wooden frame all as specified.

S&F 150 mm size extruded aluminium alloy handles fabricated type anodised and fixed.

S&F 150 mm size aluminium anodized barrel tower bolts of extruted section and fixed.

M&L for 300mm aluminium alloy anodised sliding door bolts with hasp, staple and fixing clip of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast- aluminium alloy.

M&L for plain cement concrete 1:4:8 type D2 (40 mm graded aggregate) as in foundations, filling and mass concrete all as specified and directed

M&L for cement concrete 1:3:6, type C2, using 40mm graded stone aggregate as in foundations, filling, mass concrete and surfacfe channel all as specified and as directed.

M&L for plain cement concrete, 1:2:4, type B1 using 20mm graded stone aggregate as in window or door cills, as in lintel upto 1.5m clear span, and similar bands, steps, string courses, copings, apex stones, bed plates, pintle blocks, etc. with plain fair faces including chamfers, weatherings, throating etc. including necessary formwork all as specified and as directed.

M&L for providing RCC precast cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate in landings, cover slabs (for manholes etc) and similar small articles with plain fair surfaces, and set in cement mortar 1:4 all as specified and as directed.

M&L for brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed.

M&L for 150 mm internal dia reinforced concrete pipes with collars, class NP2, laid and jointed complete all as specified and as directed.

M&L for cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate for bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipes all as specified and as directed.

M&L for cutting holes in brick walls built in cement mortar or cement lime mortar for inserting hold fasts, depth of embedded portion of hold fast exc half brick but not exc one brick and making good the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and as directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperature 1.40 mm, fixed with stainless steel staples to steel / wooden frames, complete all as specified and as directed.

S&F in repairs mild steel framed work such as grills, grating etc with end of bars shoulderd and/or riveted .welded or forged into spikes.framed guard bars iron doors.ladders framed balusters , walk ways. railings, frame work of water tanks for portions framed and hung as gates inclu. pintle hinges, stops, hand made sliding bolts etc and similar work conforming to Fe 290 Gde E-165 all as specified and as directed.

S&F mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.

M&L for 75mm thick PCC 1:4:8, type D2, using 40mm graded stone aggregates as in sub base of flooring complete all as specified and as directed.

M & L for Solid PVC wall lining consisting of 5 mm thick single side prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including dismantling existing wall lining all as specified and as directed.

M & L for Solid PVC 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification adn drawing.

M&L for anodised aluminium snap grid frame work of grid size 605mm x 605mm for false ceiling with and including 4mm thick non asbestos fibre cement building boards (decorative type), fixed or laid/inserted in aluminium frame work/grid, 4mm dia GI hangers at 1.2m c/c fixed to roof slabs by means of ceiling cleats made out of GI flat 40mm x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long, including preparation of new ceiling surfaces and applyig two coats of distemper oil emulsion over a coat of chalk whiting complete as specified and as directed.

M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for coloured non skid ceramic tiles, 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, as in floors etc. laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles complete all as specified and as directed.

M&L for coloured glazed ceramic tiles of size 300mm x 200mm x 7mm thick / 450mm x 300mm x 7 mm thick on vertical surfaces, over and including 10 mm thick cement plaster in cement mortar 1:4, set & jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified and as directed.

M&L for coloured double charged / ultracharged vitrified tiles, 9 to 10mm thick (Square or rectangular), area of each tile exc 0.42 Sqm but n exc 1.00 sqm as in floors, set and jointed in neat cement slurry & pointed in white or coloured cement to match colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and a directed.

All as per serial item No 50 above but in dado / skirting or on vertical surfaces, laid over and including 10mm thick backing coat in cement mortar 1:4.

M&L for Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floors laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for 18 to 20mm thick granite (of any type) table rubbed and polished any colour as in steps, jambs, pillars, windows cill, cooking platform and like in one piece laid over and inlcluding 10mm thick backing coat of cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and directed.

M&L for machine cut Cudappah stone slab 20-25mm thick laid over and including cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

S&F in repairs, double action floor spring hydraulically regulated made up of min 1.25mm thick aluminium alloy sheet foundaion box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and as directed .

S&F in repairs Collapsible steel gates, top hung,consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed

M&L for machine cut kota stone slab flooring 20 to 25 mm thick over cement creed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20 mm thick bedding layer in CM 1:6 with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and directed..

M&L for Post construction anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick surface/ concrete surfaces, finished even and fair complete all as specified and as directed.

M&L for 10 mm thick rendering in cement mortar 1:6 on other than fair faces of brick surface/ concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

S&F glass panes 4mm thick, in squares exceeding 0.50Sqm in each pane with solar control film as in doors & windows complete all as specified and as directed.

S&F in Repairs sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.50Sqm in each pane complete all as specified and as directed.

M&L for newly plastered wall surfaces, preparation of surface and applying applying two or more coats of 100% premium exterior acrylic emulsion paint (weather coat) alkali & fungal resistance, dirt resistance of required shade over and including priming coat of exterior primer complete all as specified and as directed.

M&L Complete removal of existing treatment on walls including cornices by scrapping with steel scrappers or any other means including filling depressions of scrapped surfaces and making smooth surface with one coat of average 1 mm thick wall care putty and applying two coats of oil bound distemper (white or tinted) over a coat of primer complete all as specified and as directed.

M&L for Complete Removal of existing treatment on walls and roof including removing nails, making good holes cracks etc brooming down or steel wire brushing scrapping down or steel wire brushing scrapping down smoke soots etc and applying Two coats of exterior Acrylic emulsion (Apex) any tint over one coat of Exterior Acrylic primer with and including provision of scaffolding required for the treatment to external surfaces of building with required safety measures etc complete Note : The cost of scaffolding, safety measures etc shall deemed to be included in the unit rate quoted.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for 15 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings, concealed in wall or laid in floors etc complete all as specified and as directed.

M&L for 20 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings, or laid in floors etc complete all as specified and as directed.

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern/anglo pattern) white including plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated hinging device (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repairs, 10 litres capacity, PVC valveless , syphonic action type, flushing cistern, low level , white with inlet ball valve and handle including brackets complete all as specified and as directed.

S&F in repairs vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe) including urinal spreader of brass chromium plated for fixing with 15 mm dia pipe, PVC connection, 40mm PVC waste pipe & 40 mm waste coupling providing and fixing plugs, bedding urinal against wall in mortar 1:2, securing urinal to plug, with and including 60mm long screws, pointing around urinal back in cement, fixing flush pipe, complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 1000 litres capacity, tripple layered, hoisted and fixed in position and connecting including dismantling existing water tank all as specified and as directed.

S&F in repairs, ball valves high pressure PTMT with epoxy coated aluminium ball rod and high density plastic ball screwed for 20mm bore iron pipe (Minimum weight 210 gms) complete all as specified and as directed.

S & F in repairs, gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions and fixed to 20 mm bore pipe, complete all as specified and as directed.

S & F in repairs PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110 mm bore

S & F in repairs PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls 110 dia bore

S & F in repairs PVC (SWR) branch piece, double (double Y) equal or unequal with access door 110 mm bore

S & F in repairs PVC (SWR) bend any radius, with oval access door 110 mm bore

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F Bib taps in repairs fancy type chromium plated 15mm dia in repairs cast copper alloy with capstan heads, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete.

S&F stop valves fancy type chromium plated 15mm dia cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete

S & F in repairs PVC connection 60cm long 15mm dia with 2 nos CP brass check nuts fixed in repairs complete.

S & F in repairs looking mirror of size 600mmx 450 mm approved quality and make, mounted on 6 mm thick ply wood commercial as backing and PVC capping on edges fixed with wooden plugs in wall with CP brass service & cap washers complete as directed by Engr-in-charge

S&F in repair, 100mm dia, cast iron nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate all as specified and directed.

S&F in repairs, 75mm dia, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls all as specified and as directed.

S&F in repairs, 75mm dia PVC (SWR) bends, any radius with access door all as specified and as directed.

Dismantling old fencing wire mesh/chain link fencing, any description complete all as specified and as directed.

Excavation in post holes, in any type of soil each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed.

S&F 100 mm dia UPVC pipes, as in weep holes for boundary wall and drains complete all as specified and as directed.

M&L for mild steel work as in posts and struts as in fencing including cutting tops to shape as required, drilling holes, notching for wire etc flat iron fillets (for securng wire mesh etc) including necessary drilling, bolting or rivetting etc and similar work conforming to Fe-290 Gde-165 all as specified and as directed.

Supply only chain link fencing net, mild steel galvanised, made out of 4mm dia GI wire, complete all as specified and as directed. Notes :- (i) Mesh size shall be as decided by Engineer-in-Charge. (ii) weight of chain link fencing shall be decided by BOO ordered by GE.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards,rails, straining bolts etc including provision of bindig wire complete all as specified and as directed.

S&F mild steel round bars conforming to Fe 410W (Gde E 250 ) quality A as in line bars for fixing chain link fencing including hooking ends of bars complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description not exceeding 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed

M&L for mild steel TMT bars, 5mm dia and over upto and including 10mm dia as stirrups and spacers, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Use and waste of form work to sides of footing, plinth beams/ bands and similar work for rough finished surfaces of concrete complete all as specified and as directed.

Use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished faces of concrete all as specified and as directed.

M&L for RCC 1:1.5:3, type A-1 (using 20 mm graded stone aggregates) as in foundation, footing, plinth beam and similar bands etc complete all as specified and as directed.

M&L for RCC 1:1.5:3, type A-1 (using 20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts all as specified and as directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on fair faces of brick surface/ concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls applying two coats of cement base paint over a coat of primer all as specified and as directed

Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete with all fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc as directed.

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade,conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable drawn through and including PVC cable 650/1100 volts grade, confirming to IS-694 1990, drawn through and including PVC casing capping 32mm /25 mm width with all accessories (ISI marked) such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including with modular cover plate with frame and modular metal flux boxes, blank plate for mounting fitting & fixture like switches sockets and fan regulators etc as specified and directed for one light point or one fan point controlled by one, one way switch NOTES: 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black). 2. All points shall be earthed up to fixtures i.e holders,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc.

All as per item No 103 but for 6 Amps Socket on same Board complete all as specified and directed by Engr in Charge.

All as per Item No 103 but for 6 Amps Socket on independent board complete all as specified and directed by Engr in Charge.

All as per item No 103 above but for power point 3 pin switch socket 16 Amp with PVC insulated copper conductor cable multistrand unsheathed 2.5 Sqmm on independent board incl one run 2.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping fixed on wall incl including PVC box 2 mm complete all as specified and as directed by Engr in Charge.

S&F Modular switch single pole one way 6/10 Amps 1 module complete all as specified and directed by Engr in Charge.

Supply and fix modular switch single pole one way 16 Amps 1 module complete all as specified and directed by Engr in Charge.

Supply and fix modular socket 6 amp, 2/3 pin combined 2 module complete all as specified and directed by Engr in Charge.

Supply and fix modular socket 16 amp, 2/3 pin combined 2 module complete all as specified and directed by Engr in Charge.

S&F ceiling rose surface bakelite three terminal type complete all as specified and directed by Engr in Charge.

S&F modular fan regulator Step Type, 120W, 2 Module Complete all as Specified and as directed.

S & F in replacement decorative ultra slim square profile LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient of capacity 20 Watt, 6500 K with inbuilt driver complete fitting and all other accessories fitting arrangements including connecting up withsuitable flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make :- Cat No. LHEXACP7IN1W020 of Havells or equivalent model of makes specified in PS

S&F in replacement decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient of capacity 10 Watt, 3000 K with inbuilt driver complete fitting and all other accessories fitting arrangements including connecting up with suitable flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make :- Cat No. LHEXACP5IN1W010 of Havells or equivalent model of makes specified in PS

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr in Charge. Make :- Cat No. BPRF 36W WH SL LED of Bajaj or equivalent model of makes specified in PS

S & F in replacement LED light fitting 1x 10W bulkhead luminaires including LED light driver holder connecting up with flexible copper conductor cable of suitable size complete all as specified and as directed. Make :- Cat No. BIBWP 10W LED of Bajaj or equivalent model of makes specified in PS

S&F in replecement unique slimlest recess cum surface LED panel ED luminaire 300 mm x 300 mm, 24 watt, 6500K, 220 V AC with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified and as directed. Make :- Cat No. LHEBAEP7121W024 of Havells or equivalent model of makes specified in PS

Supply and fixing LED down light round shape 15 watt 220 volts AC recessed type with diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed. Make :- Cat No. BGSLO sleek recess RD 15W WH LED of Bajaj or equivalent model of makes specified in PS

S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S & F Lamp LED 9 Watt, 230 volts 50 Hz AC complete all as specified and directed by Engr in Charge. Make :- Cat No. LHLDEUHEML 8R1010 of Havells or equivalent model of makes specified in PS

Supply and Fix in replecement 35 Watt building mounted LED Security light fitting complete made up of pressure die cast housing and individual high power LEDs with IP66 protection and impact resistance of IK07 & 10KV external SPD, including GI bracket made out of GI pipe 40/50 mm bore, medium grade pipe 1.2 m long bend to shape required fixed to pole / wall with 02 Nos MS clamps made out of flat iron 40 x 5 mm including nuts, bolts and washer, painting with two coats aluminium paint over a coat of primer, suitable for LED fitting, complete all as specified and directed by Engr in Charge. Make :- Cat No. ENXT P 35L WH PO PC SD of Bajaj or equivalent model of makes specified in PS

S&F in replacement post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete including suitable size of GI Pipe as per lamp size including connection and testing complete all as specified and as directed.

S&F in replacement old unsv MCB DB double door 4 way VTPN type with isolated neutral bar and Isolated Bus bar assembly with IP 43 protection 415 V including MCCB's 4 pole of size 125 Amp 25 KA adjustable thermal release setting tpe Complete all as specified and directed by Engr in Charge.

S&F in replacement of old unsv MCB DB double door 8 way SPN with suitable rated busbar 240 V complete all as specified and directed by Engr in Charge.

S&F in replacement of old unsv MCB DB double door 12 way SPN with suitable rated busbar 240 V complete all as specified and directed by Engr in Charge.

S&F in replacement of old unsv MCB DB double door 4 way SPN with suitable rated busbar 240 V complete all as specified and directed by Engr in Charge.

S&F in replacement MCB DB single door 2 way SPN with suitable rated busbar 240 V complete all as specified and as directed.

S&F in repairs MCB TPN 415 volts 100 Amps "C" curve complete all as specified and directed by Engr in Charge.

S&F in repairs MCB single pole & Neutral (DP) 240 volts 40-63 Amps "C" curve complete all as specified and directed by Engr in Charge.

S&F in repairs MCB single pole 240 volts 6 to 32 Amps "C" curve complete all as specified and directed by Engr in Charge.

Supply and fix in replacement Single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp 240 Volts complete all as specified and directed by Engr in Charge.

Supply, laying, jointing and testing 50 Sqmm 3.5 Core, XLPE insulated, PVC sheathed, conforming to relevant IS, ISI marked, earthed system, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade, in trenches/ wall/ floor/ pole complete and making connection including suitable size Aluminium lugs, including taking out existing cable and cable covers all as specified and as directed .

All as per serial item No. 132 above but cable of size 10 Sqmm x 2 Core

M&L for Double Walled Corrugted (DWC) HDPE pipe of outer dia 50 mm and Internal dia 38 mm including 90 degree bends with coupler and rubber ring laid in trenches suitable for cable protection complete all as specified and as directed.

Supply and fixing in repairs GI tubing light grade of 40 mm dia for cable protection on pole/wall/floor/ or in trenches and drain etc complete with necessary clamp, nut, bolts and washers and socket and making good the disturbed surface of wall , floor or roof etc all as specified and directed by Engr in Charge.

M&L for sub main wiring with 2 runs of 6 sqmm, single core, PVC insulated & unsheathed cable, conforming to IS-694, 1100 volts with copper conductor, multi stranded, drawn in and including suitable size PVC Casing Caping (ISI marked) with all accessories such as Tees, Elbows, junction box etc as requied alongwith one run of 6sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire connected to common earth dolly and connecting to existing main switch board / distribution board of each building as ordered and testing on completion including taking down old submain wiring and any type of casing/caping/Conduit complete all as specified and as directed. Note : Three runs of 6 Sqmm cable and one run of PVC casing/caping will be measured as one Rm unit.

M&L for sub main wiring with 2 runs of 4 sqmm, single core, PVC insulated & unsheathed cable, conforming to IS-694, 1100 volts with copper conductor, multi stranded, drawn in and including suitable size PVC Casing Caping (ISI marked) with all accessories such as Tees, Elbows, junction box etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire connected to common earth dolly and connecting to existing main switch board / distribution board of each building as ordered and testing on completion including taking down old submain wiring and any type of casing/caping/Conduit, complete all as specified and as directed. Note : Three runs of 4 Sqmm cable and one run of PVC casing/caping will be measured as one Rm unit.

M&L for sub main wiring with 2 runs of 2.5 sqmm, single core, PVC insulated & unsheathed cable, conforming to IS-694, 1100 volts with copper conductor, multi stranded, drawn in and including suitable size PVC Casing Caping (ISI marked) with all accessories such as Tees, Elbows, junction box etc as requied alongwith one run of 2.5 sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire connected to common earth dolly and connecting to existing main switch board / distribution board of each building as ordered and testing on completion including taking down old submain wiring and any type of casing/caping/Conduit, complete all as specified and as directed. Note : Three runs of 2.5 Sqmm cable and one run of PVC casing/caping will be measured as one unit.

M&L for earthing complete with galvanised steel earth plate electrode, 60cm x 60cm x 6 mm thick, burried directly in ground (earth pit not less than 2.25metre deep below normal ground level) with top edge of earth plate not less than 1.5 metre below normal ground level, connected to and including galvanised earth lead wire of 4 mm dia from earth pit to each qtr DB by means of nuts & bolts, check nuts and washers of galvanised including PCC pit of 1:2:4, type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, mild steel angle iron 25 x 25 x 3mm in frame, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate no 3 of MES sch 2009 (Part I), including taking down old earthing connected main switch board all as specified and testing on completion.

Supply and errection of steel tubular swaged poles complete with cast iron base plate, finial tapper plug, bolts, nuts & screws as specified type 410 SP-31, 9.00 Mtr long including one coat of red-oxide zinc chrome primer and two coats of aluminium paint on surfaces exposed to view and making 30cm wide strips (total 5 Nos) with yellow and black paint alternately on external surface above PCC benching and painting with bituminous paint internally including writing the pole number in white letters on black background complete and externally for portion embedded in PCC, complete all as specified and as directed. Note :- Excavation & earthwork and PCC in foundation of poles, coping etc shall be measured and paid saperately under respective item.

Supply and fixing LED Flood light fitting 200 Watt or higher capacity, 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including suitable size of GI Bracket , Nut bolt etc for fixing on LT Pole complete all as specified and as directed. Make :- Cat No. GLEAM-G F 240L WH NB-A5 PC SD of Bajaj or equivalent model of makes specified in PS

S&F FRP Junction box, light weight low corrosive suitable for pole mounting including MCB SP 20 amps, Box size not less than 250x200x100 mm including necessary connection for loop in and loop out cable connector and suitable size cable glands complete all as specified and as directed.

M& L for PVC insulated 3 core copper wire, flexible type of size 4 sqmm in PVC conduit 20 mm dia for street light, connection of length as per site requirement from junction box to street light complete all as specified and as directed .

Bhirud Electric Stores (BID ID -3144956)

CHAUDHARY AND ASSOCIATES (BID ID -3146763)

M/S H.N.ENTERPRISES (BID ID -3147910)