CWE/CHM(U)-130/2025-26 CONSTRUCTION OF CREMATORIUM AT CMS UNDER GE (U) CHANDIMANDIR

M&L for Surface dressing not exceeding 15 cm deep as in soft/ loose soil complete all as specified and as directed by Engineer-in-Charge.

M&L for Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and as directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out in hard/ dense soil for stay assembly/ laying of cable/ erection of poles etc complete all as specified and as directed by Engineer-in-charge.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out in soft/ loose soil for stay assembly/ laying of pipe line/ laying of cable/ erection of poles etc complete all as specified and as directed by Engineer-in-charge.

M&L for Earth work in excavation by mechanical means (Hydraulic Excavator) in all kind soil, over areas (exc 30 cm in depth, 1.5 metre in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 metre and lift upto 1.5 metre complete all as specified and as directed by Engineer-in-Charge.

M&L for Earth work in excavation by mechanical means (Hydraulic excavator) in all kind soil as in foundation trenches or drains (not exceeding 1.5 metre in width or 10 square metre on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 metre, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metre complete all as specified and as directed by Engineer-in charge.

M&L for Cement concrete 1:4:8, Type D-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed by Engineer-in charge.

M&L for Cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregates) as in coping, kerbs or mud stops, rounded or chamfered on edges including weathering slightly rounded or chamfered angles and throating and the like including use of formwork (straight or curved) complete all as specified and as directed by Engineer-in-charge.

M&L for brick work with fly ash bricks straight or curved on plan exceeding 6 metre mean radius built in Cement Mortar 1:6 complete all as specified and as directed by Engineer-in charge.

M&L for Brick work with fire resistance Brick blocks, built in CM (1:6) complete all as specified and as directed by Engineer-in-Charge.

M&L for Brickwork with sub class 'B' bricks, (old size bricks), straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L for Returning/ filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil complete all as specified and as directed by Engineer-in charge.

M&L for Removing excavated material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-Charge.

M&L for Reinforced Cement concrete (RCC) M-25 grade, (using 20 mm graded crushed stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and as directed by Engineer-in charge.

M&L for Reinforced Cement concrete (RCC), M-25 grade (using 20 mm graded crushed stone aggregate) in Columns, pillars, piers, posts and struts complete all as specified and as directed by Engineer-in charge.

M&L for Reinforced Cement concrete (RCC) M-25 grade (using 20 mm graded crushed stone aggregates) in beams, cantilevers, bressumers, lintels upto 1.5 metre span complete all as specified and as directed by Engineer-in-Charge.

M&L for Reinforced Cement concrete (RCC), M-25 (using 20 mm graded crushed stone aggregates) in slabs supported on walls complete all as specified and as directed by Engineer-in-Charge.

M&L for Reinforced Cement concrete (RCC), M-25 grade (using 20 mm graded stone aggregates) in Chajjas, fascias, louvres, parapets and railings exceeding 60 cm in height, newels, balustrade and the like complete all as specified and as directed by Engineer-in-Charge.

M&L for Reinforced Cement concrete (RCC), M-25 grade (using 20 mm graded crushed stone aggregates) in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and as directed by Engineer-in-Charge.

M&L for providing pre-cast cement concrete in landings, cover slabs (for manholes etc.,), chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) and setting in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L for use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; including finishing rough flat surface of concrete complete all as specified and as directed by Engineer-in-Charge.

M&L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions incuding finishing rough surface of concrete complete all as specified and as directed by Engineer-in-Charge.

M&L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams including finishing rough flat surface of concrete complete all as specified and as directed by Engineer-in-Charge.

M&L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exceeding 200 mm thick horizontal or sloping including finishing rough flat surface of concrete complete all as specified and as directed by Engineer-in-Charge.

M&L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter horizontal or slopping including finishing rough flat surface of concrete complete all as specified and as directed by Engineer-in-Charge.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

M&L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 10 mm thick in Cement Mortar 1:6 on concrete/ wall surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 05 mm thick in ceiling in cement mortar 1:3 on fair faces of brick work or concrete surfaces and finishing the surface even and fair complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick or concrete surfaces in Cement Mortar 1:4, finished fair & even including mixing with WPC complete all as specified and as directed by Engineer-in-Charge. Note : WPC will be measured and paid separately.

M&L for Rendering 15 mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4, finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc., complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of newly plastered wall surfaces and applying two coats of acrylic distemper over one coat of primer over and above 1 mm thick cement based wall care putty complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of newly plastered ceiling surfaces and applying two coats of acrylic distemper over one coat of primer over and above 1 mm thick cement based wall care putty complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of newly plastered/ untreated wall surfaces and applying two coats of acrylic base weather shield paint (1st quality) over one coat of exterior grade primer including preperation of surfaces complete all as specified and as directed by Engineer-in-Charge.

Supply only integral water proofing compound, ISI Marked, complete all as specified and as directed by Engineer-in-Charge.

M&L for 75 mm thick, Plain cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate), as in plinth protection etc., including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for providing 100 mm thick Plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub floor, sub base of floor complete all as specified and as directed by Engineer-in-Charge.

M&L for 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20 mm thick cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

M&L for 18 mm Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in-Charge.

M&L for extra over granite or marble slab for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc., complete all as specified and as directed by Engineer-in-Charge.

M&L for double charged vitrified ceramic coloured tiles, 10 mm thick (square/ rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white cement paste pigmented to tile shade over and including 15 mm thick cement and sand screed in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

All as per Serial item No. 42.00 here-in-before but on vertical surface such as skirting, dado and 10 mm thick cement sand rendering in cement mortar 1:3, complete all as specified and as directed by Engineer-in-Charge.

M&L for Non-Skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm average thickness screed bed in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L for Glazed ceramic coloured tiles, 7 mm thick, 300 mm x 450 mm size in vertical surfaces., set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10 mm thick cement sand plaster (1:3) complete all as specified and as directed by Engineer-in-Charge.

S&F Powder Coated aluminium frame (thickness of powder coating not less than 50 micron of approved colour) for doors, windows, partitions, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer-in-Charge.

S&F aluminium powder coated (thickness of powder coating not less than 50 micron of approved colour) door shutters, aluminium section weighing 0.55 kg/metre including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, aluminum snap beading screws etc. complete all as specified and as directed by Engineer-in-Charge.

S&F aluminium powder coated window and ventilator shutters (thickness of powder coating not less than 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/metre including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, aluminium fittings such as peg stays 150 mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engineer-in-Charge.

S&F aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

Supply and fixing 4.80 mm thick sheet glass, tinted, ordinary quality, size in square/ rectangle exceeding 0.5 Sqm in each panes fixed to aluminium frame work complete all as specified and as directed by Engineer-in-charge.

S&F 4 mm thick ACP (Aluminium Composit Panel)of approved color as in doors, windows & partitions, fixing with aluminium beading or as per manufacturer's instructions including joint filling and tapping with necessary arrangement complete all as specified and as directed by Engineer-in-charge.

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed with tinned tack or stainless wire staples including all cuttings, wastage etc., complete all as specified and as directed by Engineer-in-charge.

S&F 100 mm mortice lock with four levers, bright finished brass, vertical type with necessary screws etc., complete all as specified and as directed by Engineer-in-charge.

S&F floor door stopper, aluminium alloy body and tongue, anodised, with 140 mm long cover plate and hard drawn steel spring, fixed in floor complete all as specified and as directed by Engineer-in-Charge.

S&F door closer, aluminium (extruded section) body, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed by Engineer-in-charge.

S&F Solid PVC Door frame of size 50 mm x 47 mm, made out of 5 mm thick plain PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing factory made solid panel PVC door shutter, 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement & fixing in the frame at site as per specifications & drawing complete all as specified and as directed Engineer-in-Charge.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F Aluminium anodized 100 mm long barrel tower bolt of extruded section and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F 150 mm long extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing steel rolling shutters (1 mm thickness of lath), without ball bearing, as specified including top cover, anchoring rod, hasp and staple, gear operated type with bevel gear box and crank handle including one shop coat of red oxide zinc chrome primer, erected in position as indicated complete all as specified and as directed by Engineer-in-charge.

S&F pre-fabricated durable steel door including painting and fixing at site complete all as specified and as directed by Engineer-in-Charge.

S&F factory made (Box type) Steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, tower bolts complete with glazing bars, dovetailed or welded including one shop coat of red oxide primer etc complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of surafaces and appling two coats of fire resistance paint on steel and RCC wall and ceilling complete all as specified and as directed by Engineer-in-Charge.

S&F GI Tubes, 15 mm Bore, 'medium grade', galvanised with all fitting; laid in trenches complete all as specified and as directed by Engineer-in-charge.

S&F GI Tubes, 20 mm Bore, 'medium grade', galvanised with all fitting; laid in trenches complete all as specified and as directed by Engineer-in-charge.

S&F GI tubes, 80 mm bore, 'light grade' for cable protection on poles/ walls/ under road/ culvert etc complete all as specified and as directed by Engineer-in-charge.

S&F GI tubes, 50 mm bore, 'light grade' for cable protection on poles/ walls/ under road/ culvert etc complete all as specified and as directed by Engineer-in-charge.

M&L for Cutting chases, pinning in, of brick walls or concrete surfaces, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of inserting sheets, landings, steps, sills, sunshades, shelves, lintels, etc.; for concealed water tubing, concealed conduit wiring etc., and making good, cutting not exceeding 10 cm girth complete all as specified and directed by Engineer-in-Charge.

S&F Vitreous China wash down water closet pan (pedestal pattern), one piece toilet, floor mounted, white including flushing tank, fixing bolts, flush pipe, seat cover, S trap, PVC pipe 110 mm dia upto first manhole complete all as specified and directed by Engineer-in-Charge.

S&F vitreous china table top wash basin, white, size 420 mm x 420 mm x 155 mm including waste fitting brass chromium plated and fixing with new brackets including cutting and pinning in ends of brackets complete all as specified and as directed by Engineer-in-Charge.

S&F Pillar taps, 15 mm bore dia, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F vitreous china urinal, half stall type, white with grating and union for descharge pipe, fixing PVC connection & waste pipe complete to walls complete all as specified and directed by Engineer-in-Charge.

S&F vitreous china urinal partition, white, of size 310 mm x 700 mm, urinal partitions slabs terminating about 40 cm above floor line complete all as specified and directed by Engineer-in-Charge.

S&F Urinal spreader of brass chromium plated, fixing with 15 mm dia pipe to walls complete all as specified and directed by Engineer-in-Charge.

S&F 600 mm long PVC connection with two Nos. of PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed by Engineer-in-Charge.

S&F for PVC (SWR) pipes, single socketed,110 mm bore pipes, in any length with rubber joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.

S&F for PVC (SWR) bends, 110 mm bore, any radius with access door complete all as specified and directed by Engineer-in-Charge.

S&F two way Bib taps, 15 mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

S&F 15 mm bore bib taps, cast copper alloy, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.

S&F Stop valves/ Angle tap, 15 mm bore, cast copper alloy, screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing brass, CP, fancy wall mixer with L bends (including provision of overhead shower & hand shower) for mixing hot & cold water, screwed down for iron pipe 15 mm bore and fixed with and including hand shower and tube complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing brass, chromium plated shower rose, 125 mm size, with swivel joints, fixed to steel pipe or union 15 mm bore with and including 195 mm long arm, complete all as specified and as directed by Engineer-in-Charge.

M&L for PVC (SWR) floor trap, 110 mm bore with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and as directed by Engineer-in-Charge.

S&F stainless steel toilet paper holder with flat recessed type holder stainless steel complete chromium plated screws with pvc rawl plugs complete all as specified and directed by Engineer-in-charge.

S&F Sheet glass shelf assembly, made out of 5.5 mm thick sheet glass 12 cm wide with CP bracket guard & railing 60 cm long complete all as specified and directed by Engineer-in-charge.

S&F Soap dish, Vitreous China, white, approximate size 160 mm x 160 mm x 90 mm complete all as specified and directed by Engineer-in-charge.

S&F 20 mm dia brass chromium plated towel rail, 600 mm long fixed with chromium plated screws with pvc rawl plugs complete all as specified and directed by Engineer-in-Charge.

Cutting into existing manholes for connecting new drains 100 mm dia, making good to pipe & rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished & reforming benching as required complete all as specified and directed by Engineer-in-Charge.

S&F Rotational moulded PVC, Triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed by Engineer-in-Charge.

S&F 15 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 10 mm thick cement in Cement Mortar 1:4 including mixing with (liquid water proofing compound @ 200 ml per bag) measured separately) cement on green concrete surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for cleaning of prepared roof surface and applying one coat of cold bituminous primer @ 0.25 ltrs/ sqm conforming to IS 3384-1986, A Layer of APP based polymeric membrane, 3 mm thick (Minimum) weighing 3.5 kg/sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/sqm) shall be applied over bituminous primer as specified above and application of polymeric membrane shall be by torch application, the over lap shall be minimium 100 mm on transverse direction and 75 mm on longitudinal direction and applying one coat aluminium paint over the APP membrane @ 0.11 kg/sqm complete all as specified and as directed by Engineer-in-Charge. Make - MOPLY - FP manufactured by M/s Texsa India Ltd or IWL (HYPERPLAS POLYSTER) manufactured by M/s IWL as approved by GE.

M&L for Cutting into existing manhole for connecting new drain of 150 mm bore pipe making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 rounds of ¾ section) in cement concrete 1:2:4 type B-1 smooth finished reforming benching as required, complete all as specified.

M&L for Reinforced Concrete Pipes (RCC) pipe, 150 mm dia (internal), class NP-2 with collars, laid in trenches and jointed complete all as specified and as directed by Engineer-in-charge.

M&L for Concrete bed to drain pipes of 150 mm bore pipe including packing under and haunching against the sides of pipes after they are laid and tested; in Cement Concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) complete all as specified and as directed by Engineer-in-Charge.

M&L for factory made Precast reinforced concrete rectangular drain and manhole cover slab with frame of Size 1200 mm x 600 mm x 100 mm in concrete grade of M-30 (using 20 mm graded stone aggregates) with and including reinforcement inside @ 8 mm dia MS TMT bars both ways in Single layer with plain faces with MS frame (of thickness not less than 1.25 mm) all around the cover slab duly welded, set in position complete all as specified and as directed by Engineer-in-charge.

M&L for Plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in surfaces channels/ drains/ as in benching inside manholes complete all as specified and as directed.

M&L for hardcore of gauge not exceeding 63 mm broken bricks, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge.

M&L for 100 mm thick Plain Cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate), as in sub base of floors/ path and the like complete all as specified and as directed by Engineer-in-charge.

M&L for Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed by Engineer-in-Charge.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed by Engineer-in-charge.

M&L for prepration of new concrete surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over water proof primer complete all as specified and directed. (Note: Pattern/Colour of painting to be decided and approved by GE)

M&L for Cutting of the exisitng DI pipe and making hole of size 100 mm dia for inserting fitings as per requirement for taking branch connection including provision of CPVC brass tee of size 100 mm x 100 mm x 50 mm or as required as per site for taking branch connection including necessary threading etc. and sealing the same after fixing of fitting complete including necessary earth work, returning refilling etc., complete all as specified and as directed by Engineer-in-Charge.

Supply and laying high pressure CPVC pipes, 50 mm Bore, SDR-13.5 & plain CPVC SDR 11 fittings like Elbow, Tee, Socket , Reducer, bushings, step over bends, end caps, End plugs, etc., and with CPVC solvents cement for fixing in trenches complete all as specified and as directed by Engineer in charge.

Supply and fixing high pressure CPVC pipes, 25 mm Bore, SDR-13.5 & plain CPVC SDR 11 fittings like Elbow, Tee, Socket , Reducer, bushings, step over bends, end caps, End plugs, etc., and with CPVC solvents cement for fixing on wall/ ceiling/ foors/ concealed in wall complete all as specified and as directed by Engineer in charge.

Supply and fixing CPVC Ball valve, 50 mm Bore dia, ISI marked complete all as specified and as directed by Engineer in charge.

Supply and fixing CPVC Ball valve, 25 mm Bore dia, ISI marked complete all as specified and as directed by Engineer in charge.

All as per serial item 110.00 here-in-before but for socket outlet, 2/3 pin, 5/6 Amps on independent board controlled by one modular switch complete all as specified and as directed by Engineer-in-charge.

All as per serial item 110.00 here-in-before but for socket outlet, 2/3 pin, 5/6 Amps on same board controlled by one modular switch complete all as specified and as directed by Engineer-in-charge.

All as per serial item 110.00 here-in-before but for One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 110.00 here-in-before but with 2.5 Sqmm single core multi stranded copper conductor of 1100 volts grade PVC FRLSH insulated and sheathed cable for one multipurpose switch socket outlet 5/6 pin 6/16 Amps on independent board including 2.5 Sqmm single core solid copper conductor 1100 volts grade PVC FRLLSH insulated and sheathed cable as earth continuity conductor to common earth and connecting to earth dolly.

S&F modular switch, one way, 6 Amps, one module, 230 volts, single pole, complete all as specified and as directed by Engineer-in-charge.

S&F modular switch, one way, 16 Amps, one module, 230 volts, single pole complete all as specified and as directed by Engineer-in-charge.

S&F Modular bell push switch, one way, 6 Amps, one module, 230 volts, single pole, complete all as specified and as directed by Engineer-in-charge.

S&F electric call bell/ buzzer, AC, 230 volts, single pole, complete all as specified and as directed by Engineer-in-Charge.

S&F modular socket outlet, 2/3 pin, 6 Amps, two module 230 volts complete all as specified and as directed by Engineer-in-charge.

S&F modular socket outlet, 2 in 1, 6/16 Amps, two module, 230 volts complete all as specified and as directed by Engineer-in-charge.

S&F modular type fan regulator, 120 W, stepped type, single pole, two module, 230 volts complete all as specified and as directed by Engineer-in-charge.

S&F ceiling rose 65 mm x 50 mm, three terminals, PVC/ polycorbonate isolated body complete all as specified and directed by Engineer-in-Charge.

S&F LED Mirror light fitting, 10 watt with high output diffuser, 2 feet length, 220 volts, AC decorative box type with driver, holder and LED lamp including connection up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by engineer-in-charge.

Supply & Fixing LED light fitting, 1 X 20 Watt, 220V, box type with driver, holder including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engineer-in-charge.

S&F MCB Distribution Board (DB), SPN, 240 volts, 8 way, double door fitted with 200 amps bus bar, neutral link, earth bar and din rail complete all as specified and as directed by Engineer-in-charge.

S&F MCB, Single Pole and Neutral (SPN), 32-63 Amps, 240 Volt, 'C' Curve with rupturing capacity not less than 10 KA complete all as specified and directed by Engineer-in-Charge.

S&F MCB, Single Pole (SP), 06-32 Amps, 240 Volt, 'C' Curve with rupturing capacity not less than 10 KA complete all as specified and directed by Engineer-in-Charge.

S&F MCB, Single Pole (SP), 06-32 Amps, 240 Volt, 'B' Curve with rupturing capacity not less than 6 KA complete all as specified and directed by Engineer-in-Charge.

Supply & fixing industrial type sheet metal enclouser, SPN, with two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC, 240 volts complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of MS down rod, heavy duty, 15 mm nominal dia, 48" long, duly painted in matching colour complete all as specified and as directed by Engineer-in-Charge.

M&L for Sub main wiring with 2 runs of 6.0 sqmm, single core FRLSH, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including non metallic PVC conduit (Concealed) of appropriate dia with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6.0 sqmm single core FRLSH PVC insulated & unsheathed copper conductor as continous earth wire dolly and connecting to existing main switch board/ distribution board including Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth complete all as specified and as directed by Engineer-in-charge.

M&L for Sub main wiring with 2 runs of 4.0 sqmm, single core FRLSH, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including non metallic PVC conduit (Concealed) of appropriate dia with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FRLSH PVC insulated & unsheathed copper conductor as continous earth wire dolly and connecting to existing main switch board/ distribution board including Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth complete all as specified and as directed by Engineer-in-charge.

M&L for Sub main wiring with 2 runs of 1.50 sqmm, single core FRLSH, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including non metallic PVC conduit (Concealed) of appropriate dia with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 1.50 sqmm single core FRLSH PVC insulated & unsheathed copper conductor as continous earth wire dolly and connecting to existing main switch board/ distribution board including Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth complete all as specified and as directed by Engineer-in-charge.

Note for Serial item No. 127.00, 128.00 & 129.00: NOTE:- (i) Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same. (iii) Instruction for submain wiring to be followed/ compiled strictly as per Para 1 & 2, Page Ser No 461 of SSR Part-II of 2020.

Supply and fixing ceiling fans complete with blades and accessories, 230 V, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00, BEE Five star rated with brushless direct current (BLDC)motor complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing exhaust fan, steel body, AC, single Phase, 230 Volt, 50 Hz of size 300 mm sweep, 1400 RPM, with blades, frames and louvers complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing electric water heater, storage type, steel body with copper inner tank, 25 Litres capacity, heating element rated power 2 KW, 230 Volt, 50 Hz, Temperature range 25°C to 75°C, BEE 5 star rated with provision accessories such as safety valve, Thermostate, NRV and inlet/ outlet type CP connections etc. complete all as specified and as directed by Engineer-in-Charge.

M&L for earthing complete with galvanised steel earth plate electorde 600 mm x 600 mm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metre below ground level) connected to galvanised earth lead wire 4 mm dia by means of GI bolts nuts, check nuts washer of galvanised iron including 15 mm bore (light grade) GI pipe for protection of earthing lead, 20 mm bore (medium grade) GI pipe for watering with funnel, wire mesh all as shown in electric plate No 3 of MES SSR Part-I and including excavation & earth work in any type of soil, disposal of soil, providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix (1:3:6) type C-I with 40 mm thick, RCC 1:2:4 type B-1 cover reinforced with 8 mm dia nominal reinforcement @ 100mm c/c both ways both ways with lift hook made out of 8 mm dia MS bar and testing on completion, complete all as specified and as directed by Engineer-in-Charge.

NOTE:- (a) Note : The unit rate includes for protecton pipe 15 mm and GI wire 4 mm dia from top of earth plate upto 7.50 metre. (b) Rate quoted shall deemed to include PVC type DC insulators with screws, nuts, bolts etc to be used in suface/ wall/ floor for mounting of wire and distance between two insulator shall not be more than 1.0 metre. (c) Minimum 100 Kg salt and 100 Kg charcoal granual type to be used for each earth pit. The bed to be done in 3x15 cm depth of salt and 3x15cm depth of charcoal in alternate layer.

Supply, laying & testing of XLPE insulated, screened, PVC bedded, galvanised strip or wire armoured, heavy duty LT cable, with stranded aluminium conductor, 1100 volts grade, of size 50 sqmm, 3.5 core, laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete all as specified and directed by Engineer-in-Charge. Note:- Excavation & earth work, sand cushioning and cable protection shall be measured and paid separately.

All as per Serial item No. 134.00 here-in-before but of cable size 6 sqmm, 2 core.

Supply, erecting and fixing in true vertical position, steel tubular swaged pole (410 SP–31), 9 metre long, complete with cast iron base plate, pole cap/ finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal welded throughout entire length of pole with and including two coats of aluminium paint over a coat of red oxide primer and providing 30 cm wide alternate black and yellow strips up to 1.5 meter from GL complete all as specified and as directed by Engineer-in-charge. Note- Excavation, earth work and PCC shall be measured and paid separately under relevant items.

Supply & fixing street light junction box of size 168 mm x 253 mm x 115 mm made of high quality thermoplastic body with transparent cover, hinged with 4 Nos DIN mounted terminal suitable for 6 Sqmm, 2 core XLPE insulated cable, IP-66 (Dust and power jet Proof according to IEC 60529) rated, shock proof, rust free, corrosion free, acid and chemical resistant, fire retardant having high impact (IK 08) totally insulated (Class II) made of halogen and silica free recyclable material, UV resistant having high grade gasket made of polyurethane with copper bus bar 25 x 5 mm - 04 nos of strips with locking arrangement and 2 Nos M40 size cable gland and one M32 size gland suitable for 6 Sqmm cable 2 core cable including one No of MCB, SP, 6 Amps and fixing to the street light pole with 02 Nos, 25 x 3 mm thick MS clamps, nuts & bolt etc., complete all as specified and as directed by Engineer-in-Charge.

Supply, installation, testing and commissioning of Outdoor type LT Feeder piller box made out of 3.15 mm thick CRCA sheet out door type, totally enclosed weather dust and vermin proof as per IS, CPRI Approved with front opening suitable locking arrangement having copper bus bar of 100 Amp capacity for RYB and half for neutral and insulated with insulators including connecting incoming and outgoing cables including necessary PCC 1:3:6, type C-2 as in foundation and grouted with angle iron made out of 50 mm x 50 mm x 6 mm, grouted at ground above 30 cm from ground level comprising of the following switchgears complete all as specified and as directed by Engineer-in-Charge. Note : Cost of necessary internal wiring from bus bar to ACB/ MCCBs/ MCBs/ Enclosure connections etc., shall deemed to be included in the unit rate.

Incoming: (a) MCCB 63 Amp 4 Pole, 415 Volt. 25 kA, Ics= Icu=Icw for 1 sec with spreader & rom - 01 No. (b) Indicating Lamp Red/ Yellow/ Blue - 03 Nos (c) MCB, SP, 6 Amps - 03 Nos (d) MFM Meter with CT- 01 No Outgoing: (a) 63 Amp 4 Pole, MCCB, 415 Volt 16 kA, Ics100% ofIcs with spreader &rom -01 Nos. (b) MCB, TPN, 32 Amp, 415 Volt, 10 KA = 01 No. (c) Power contactor 9 Amp -02 Nos (d) Digital time switch daily program -01 Nos

Supply and fixing in repair LED building security/ street light fitting 35 Watt, 230 V AC, outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/ 66 protection complete all as specified and as directed by Engineer-in-charge.

Supply and fixing 10 Watt LED Bollard light with 360° light distribution, minimum height 1000 mm, Inverted Pyramid Tripod type, new generation energy saving and environment friendly, life span minimum 50000 hours, aesthetically designed with IP 65 rated complete all as specified and as directed by Engineer-in-charge.

Supply and fixing decorative post top lantern LED, 40 Watt, 230 volts AC outdoor type with decorative post top for 360 degree indirect light, IP-65 protection with impact and corrosion resistant and glare free complete with driver and lamp complete all as specified and as directed by Engineer-in-charge.

M&L for security/ street light mounting bracket made out of 40 mm bore GI 'Light grade' pipe 1.50 Metre long bent to required shape as in bracket for steet light fittings fixed with two pair of MS flat iron clamp of size 30 mm X 6 mm thickness of required shape with nuts, bolts and washers of suitable size and fixed to steel tubular pole including painting of bracket surface with one primer coat, one under coat and one finishing coat of aluminium paint complete all as specified and as directed by Engineer-in-Charge.

M&L for earthing complete with galvanised steel earth plate electorde 600 mm x 600 mm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metre below ground level) connected to galvanised earth lead strip 32 mm x 6 mm by means of GI bolts nuts, check nuts washer of galvanised iron including 40 mm bore (light grade) GI pipe for protection of earthing lead, 20 mm bore (medium grade) GI pipe for watering with funnel, wire mesh all as shown in electric plate No 3 of MES SSR Part-I and including excavation & earth work in any type of soil, disposal of soil, providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix (1:3:6) type C-I with 40 mm thick, RCC 1:2:4 type B-1 cover reinforced with 8 mm dia nominal reinforcement @ 100mm c/c both ways both ways with lift hook made out of 8 mm dia MS bar and testing on completion, complete all as specified and as directed by Engineer-in-Charge.

NOTE:- (a) Note : The unit rate includes for protecton pipe 40 mm and GI earth lead strip from top of earth plate upto 7.50 metre. (b) Rate quoted shall deemed to include PVC type DC insulators with screws, nuts, bolts etc to be used in suface/ wall/ floor for mounting of wire and distance between two insulator shall not be more than 1.0 metre. (c) Minimum 100 Kg salt and 100 Kg charcoal granual type to be used for each earth pit. The bed to be done in 3x15 cm depth of salt and 3x15cm depth of charcoal in alternate layer.

M&L for Sand cushioning to UG cable 8 cm thick before laying the cable and 15 cm above the cable as specified in SSR to under ground cable including punning down of sand in layer complete all as specified and as directed by Engineer-in-charge. Note: (i) Consolidated/ Punned sand thickness shall be considered for purpose of payment. (ii) Sand shall be same as specified for plastering work.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1 flat, size 250 mm x 150 mm x 40 mm for protection of cable complete all as specifed and as directed by Engineer-in-Charge.

Supply and Laying of bricks well burnt sub class B (old size) laid flat for cable protection width equal to the length of bricks complete all as specified and directed by Engineer-in-Charge.

M&L for excavating in post holes (or similar holes) each not exceeding 0.5 cum, in Soft/ loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to a distance not exceeding 50 metre complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC 1:3:6, type C-1 (using 20 mm graded stone aggregate) in foundation of steel pole complete all as directed by Engineer-in-Charge.

M&L for PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) in coping of steel pole including necessary form work complete all as directed by Engineer-in-Charge.

Please Enable Macros to View BoQ information