RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Foam Mattress ( 56 pieces ) ( Under PAC ) Make godrejinterio Model godrejinteiroherosinglemattress4inch 1/5 Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) DIMENSION Dimention 1981 mm X 914 mm * NUMBER OF LAYERS Number of Layers Two Layers Single Layer
RequiredTwo Layers
RequiredThree Layers
RequiredFour Layers THICKNESS Thickness of Core Layer 1 50 mm 50 mm
Required75 mm
Required100 mm
Required125 mm
Required150 mm
Required175 mm
Required200 mm
Required250 mm Thickness of Core Layer 2 50 mm 50 mm
Required75 mm
Required100 mm
Required125 mm
Required150 mm
Required175 mm
Required200 mm
Required250 mm
RequiredNot Applicable Thickness of Top Layer (±2 mm) Not Applicable 25 mm
Required50 mm
Required55 mm
Required60 mm
Required70 mm
Required75 mm
Required90 mm
Required100 mm
RequiredNot Applicable Thickness of Bottom Layer (±2 mm) Not Applicable 25 mm
Required50 mm
Required55 mm
Required60 mm
Required70 mm
Required75 mm
Required90 mm
Required100 mm
RequiredNot Applicable MATERIAL Material of Core Layer 1 PU Foam PU Foam
RequiredPU Bonded Foam
RequiredVisco Elastic PU Foam (memory foam)
RequiredRubberised Coir Foam
RequiredLatex Foam Material of Core Layer 2 PU Foam PU Foam
RequiredPU Bonded Foam
RequiredVisco Elastic PU Foam (memory foam)
RequiredRubberised Coir Foam
RequiredLatex Foam
RequiredNot Applicable Material of Top Layer Not Applicable PU Foam
RequiredLatex Foam
RequiredVisco Elastic PU Foam (Memory Foam)
RequiredRubberised Coir Foam
RequiredPU Bonded Foam
RequiredNot Applicable Material of Bottom Layer Not Applicable PU Foam
RequiredLatex Foam
RequiredVisco Elastic PU Foam (Memory Foam)
RequiredRubberised Coir Foam
RequiredPU Bonded Foam
RequiredNot Applicable 2/5 QUILTING FOAM Quilting Both Side Quilting (Double Sided ) One Side Quilting (Single Sided)
RequiredBoth Side Quilting (Double Sided )
RequiredWithout Quilting Quilting Material PU Foam * Density of Quilting Material (± 2 Kg/m3) 18 Kg/m3 * Thickness of Quilting ( ±2 mm) 8 mm 8 mm
Required16 mm
Required20 mm
Required24 mm
Required32 mm
RequiredNot Applicable MATTRESS COVER Fabric Composition Polyester Polyester
RequiredCotton
RequiredPolyester-Cotton Blended (80:20)
RequiredPolyester-Cotton Blended (20:80)
RequiredPolyester-Cotton Blended (67:33)
RequiredPolyester-Cotton Blended (50:50)
RequiredVinyl Coated Fabric
RequiredTeflon Coated Fabric
RequiredPU Coated Nylon Fabric Construction Woven Woven
RequiredKnitted Fabric Mass ( Minimum ) 80 gm/m2 * Fabric Colour/Print/Pattern Printed * Flame Resistant Fabric Not Applicable Char Length -10cm maximum
Requiredafter flame time -20 sec
Requiredafter glow time - 10 sec (As per IS 11871-1986
RequiredMethod A)
RequiredNot Applicable SURFACE FINISH Surface Finish of Mattress Without Convolution * DENSITY Core Layer 1 Density 28 Kg/m3 * Core Layer 2 Density 28 Kg/m3 * Top Layer Density Not Applicable * Bottom Layer Density Not Applicable * OTHER REQUIREMENTS Mattress Top Box Type * COMPRESSION SET Compression Set for PU Foam (non quilting) as per IS 7888 1976 (Max) 10% 5%
Required8%
Required10%
RequiredNot Applicable Compression Set for Rubberised Coir Foam (Max) Not Applicable * 3/5 Compression Set for Latex (Max) Not Applicable * RESISTANCE TO AGEING Resistance to Ageing for PU Foam as per IS 7888 latest (max) Shall meet the requirement of IS 7933 Latest * Resistance to Ageing for Rubberised Coir Foam Not Applicable * Resistance to Ageing for Latex Foam Not Applicable * DURABILITY RESISTANCE TO FLEXING Durability Test for PU Foam as per IS 7888 latest Shall meet the requirement of IS 7933 Latest * Resistance to Flexing for Rubberised Coir Foam Not Applicable * Flexing Test for Latex Foam Not Applicable * Durability Test for Complete Mattress loss of height not more than 13 mm (as per ASTM 1566) loss of height not more than 13 mm (as per ASTM 1566)
Requiredloss of height not more than 25 mm (as per ASTM 1566)
RequiredNot Applicable WARRANTY Warranty 2 Year 1 Year
Required2 Year
Required3 Year
Required5 Year DEPARTMENTAL LOGO Logo Marking No Size
Requireddesign and Location of Logo as per buyer's requirement
RequiredNo Type of Logo Not Applicable * TEST REPORT Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification No * Test Report Date NA * Name of the Lab NA * Address of The Lab NA * Test reports to be furnished to buyer on demand
Requiredif claimed to be available Yes * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. 4/5
