GE 874/EWS-16/2023-24

Amount

EM Portion

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

Taking down MCB DB's complete with MCB's/Isolator etc removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

Disconnecting unserviceable sub main wiring/service connection of any size and including steel conduit and accessories and removing from site and making good the disturbed surfaces complete all as specified and directed

Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC (FR-LS-H) insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC (FR-LS-H) insulated un-sheathed copper conductor single core multi stranded flexible cable (green color) as earth lead in and including cable 1100 volts grade including casing and capping (ISI marked) for one light/ fan point including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

All as per item No 4 herein before but wiring with 1.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board.

All as per item No 4 herein before but wiring with 1.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board.

All as per item No 4 herein before but wiring with 2.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

S & F switch socket combination 2 in 1,5A, flush type .

S & F switch socket combination 5 pin 16A, flush type .

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 4 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' curve series, all as specified and as directed by Engr -in-Charge.

S & F of MCB SPN, 240 volt, 40 Amp capacity, 10 KA, 'C' curve .all as specified and as directed by Engr -in-Charge.

M & L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings

M&L for LED Batten 1x20 W for regal batten for LED Universal batten for G 13 T with 18 W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Engineer-in-Charge. Make :Havells Batten Cat part No LHFYBYG21N1W020 and LED Tube Rod Cat part No LHLDCLXNUL8X018 or Equivalent in Bajaj or Surya.

Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body.

Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x2.5 sq. mm + 1x1.5 sq. mm earth wire

Earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the platenot less than 1.5 mtr below normal ground level, connected galvanised earrth lead wire 4.0mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shoen in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion.

S&F 09W/10W Bulk head liminiares including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fix LED Bulb 9 Watt all as specified and directed by Engr-in-Charge.

Supply and fix LED Bulb 12 Watt all as specified and directed by Engr-in-Charge.

S&F Exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230v , 50HZ , RPM 1200, Copper winding of sweep 300mm, with 2 years warrenty.

S&F electric water Heater, storage type steel body with copper inner tank and and heating element upto 2 KW capacity 25 liter , BEE 5 Star rated complete with all accesries such as safety valve, thermostate, NRV, connection piece etc.

S&F 1100 volt grade heavy duty cable PVC insulated multistranded/solid aluminum conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one 2 core cable flat or circular of size 16 Sqmm incl taking down old service connection and removing from the side complete all as specified and as directed.

Supply & Laying with commissioning and testing including taking down XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles and taking out old userviceable damaged cables of size 95 Sqmm 3.5 core. :- Make- Finolex/gloster/Havells.

All as per item above but size 70 sqmm, 3.5 core.

All as per item above but size 50 sqmm, 3.5 core.

All as per item above but size 10 sqmm, 2.0 core.

Excavation in trenches n.exc.1.5m wide and n.exc. 1.5m in depth for foundation laying of pole stay assembly and laying of LT cable as in any type of soil and getting out complete all as specified and directed.

Ditto but Exc 1.50 but n.exc 3.0m deep complete all as specified and directed

Returning filling in including spreading, levelling, watering and wall ramming in layers not exc 25cm in any type of soil complete all as specified and directed.

Removal of excavated material to a distance not exc 50m and depositing where directed at a level not exceeding 1.5mtr above the starting point

Sand cushioning to underground cables 8 cm below the cable before laying and 15cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, complete all as specified.

Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' laid in trenches flat complete all as specified and directed by Engineer-in-charge.

M&L for GI pipe, light grade 40 mm dia for road crossing of cable or for cable protection of cable above ground surface all as specified and directed. Make: Prakash Surya/ Jindal/ Kalinga

M&L for GI pipe, light grade 50 mm dia for road crossing of cable or for cable protection of cable above ground surface all as specified and directed. Make: Prakash Surya/ Jindal/ Kalinga

Restretching of LT /HT ACSR conductor and GI wire of any size and on any type of poles carrying upto six conductors in a span including disconnecting from insulator and rewinding to insulator after stretching with and including aluminium wire including re-fixing/re-adjusting line spans, line separators, cross arms on poles all as specified.

Cutting /Trimming/ Chopping of tree trenches along the overhead lines upto 3 m from elect lines clearance on both sides of HT/LT lines and disposing off the cut tree/ branches site to a distance not exc. 50 m and clearing the site as directed.

Material and labour of repair unserviceable LED Street Light/ Security Light of 25 to100 Watts, including replacement of driver with a new driver (having surge protector and lightning protector) with input Voltage variation between 140V to 300V (voltage in this region will not be considered as surge voltage), with after repair warranty of two years.

Supply only of suitable LED driver (having surge protector and lightning protector) with input Voltage variation between 140V to 300V (voltage in this region will not be considered as surge voltage) for LED Street/ security Lights upto 25 to 100 Watts, with warranty of two years.

M&L in replacement of ACSR conductor of any size and any type including stretching, fixing and binding to insulator on OH LT line service feeders all as specified including aluminium binding wire or aluminium tapes complete all as specified. This item includes all consumables (such as binding wire and replacement insulators and cross arms, etc., for replacement of damaged ones found after/ during replacement process).

Supply and replacement of MCCB 160 Amp 4 Pole 415 Volt breaking capcity 36kA. Make Havells or Equivelent Make of L & T or C&S.

Supply and replacement of MCCB 200 Amp 4 Pole 415 Volt breaking Capacity 36kA. Make Havells or Equivelent Make of L & T or C&S.

Supply and replacement of MCCB 250 Amp 4 Pole 415 Volt breaking Capacity 36kA. Make Havells or Equivelent Make of L & T or C&S.

Supply and replacement of MCCB 400 Amp 4 Pole 415 Volt breaking Capacity 36kA. Make Havells or Equivelent Make of L & T or C&S.

Supply Only of on load changeover switch 415 volt in sheet metal enclosure 4 pole of capacity 100,160& 250 Amp (as required) complete all as specified and directed by Engr-in-Charge.

M&L for Painting to LT poles, 9 mtr with cross arms, bracing and clamps with one coat of synthetic enameled paint over one coat of red oxide primer including scrapping the old paint carefully to make smoothen complete and painting strips of red and black from foot of pole upto 5 feet each strip of 30 cm height all as specified and directed.

S&F in replacement of Cross arms, bracing, supports clamps and back plates, fabricated from structural steel sections incl nuts, bolts, washer, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed incl one primer, one under coat and one finishing coat of aluminium paint over prepared steel surface.

M&L in replacement of Shackle type, porcelain, vitreous, white, brown or green insulators for working pressure 1100 volts grade, 90 mm dia 75 mm height including galvanized mild steel straps of 31 x 3 mm size, 12 mm dia insulator bolts, washers and nuts complete all as specified.

M&L in replacement of Pin type porcelain vitreous white brown or green insulator including one galvanized mild steel spindle, two galvanized iron, washers and one galvanized iron nut, 100 mm height, 65 mm dia for 1100 volt grade all as specified.

Supply only self Adhesive electrical insulation tape of size 2.5cm x 25m x 0.125mm, ISI marked. Make : Steelgrip/Kinjal/SSK.

Supply and fix street light Engineering plastic one piece moulding control box with locking arrangment made out of HDPE and FI clamp 25 x 3mm complete of dimensions in CM +/-10%(34x28x13) including MCB SP 6 Amp 240 Volts complete with 02 Nos aluminium busbar or terminal two nos (2P-R/Y/B and N) of rating 63 amps for single phase and neutral on porcelain based insulators. Make : Sintex/ Hensel/ SHI/BRITE

Supply ,erecting and fixing the true vertical position,steel tubular swaged pole(410 SP-31),09 mtr long, complete with cast iron base plate,pole cap/final taper plug ,bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire lenght of pole ,including two coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with one coat of red oxide primer and two coats of aluminium paint complete all as specified and directed.(Numbering of the poles shall be done with synthetic enameled painted letter of shape & size as directed. Note:- (a) Cost of numbering of pole shall be deemed to included in unit rate. (b) Excavation, Earth work and PCC foundation will be measured and paid for separately.

S & F GI bracket made out of GI pipe light grade of size 40/32 mm 1.2 m long cut to length bend to the required shape and 02 Nos mounting flat iron clamps size 40mm x 6mm, 04 Nos hexagonal bolts 10mm dia 100mm long with nuts and washers complete all as specified and directed.

Supply and fixing LED street light luminaries 70/72 Watt having shall be made of single piece Aluminium Die cast with powder coated in RAL-7032 shade with heat distribution fins onhousing with UV stabilized toughned flass cover and should have secondary lens on each LED for better light distribution .The system luminaire efficacy should be > 110 LM/W with high power LED of Philips/Osram/Cree/Nichia Make.LED driver should be potted and BIS certified with efficiency > 85 % frequency 50 HZ,Operating voltage range 120V-270V,current not more than 0.320 Amp,PF 0.95, THD (I) < 10 %, supported with 5 KV internal and 10 KV external SPD, Humidity 10% to 90 % RH, working temperature - 20⁰ C to 50⁰ C lige expectancy of LED should be 50000 burning houres with minimum 70 % initial lumene maintained, CRI >70 Make:- Cat Part No LSTP-72-CDL-M OF Crompton or equivalent Make in Havells/Halonix/Phillips LED

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundation of PCC poles/struts as specified including necessary form work, complete all as specified & directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) in foundation of stay assembly etc including necessary form work, complete all as specified & directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) for coping around poles, including necessary form work finishing even and smooth without using extra cement, complete all as specified & directed.

Supply and connecting 1100 volts grade heavy duty cable with PVC insulated solid aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed of size 2.5/4 sqmm 3 core for pole box to street light fitting complete all as specified and directed.

S&F 1100 volt grade heavy duty cable PVC insulated multistranded/solid aluminum conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one 2 core cable flat or circular of size 10 Sqmm incl taking down old service connection and removing from the side complete all as specified and as directed.

Supply and fixing in replacement LED Flood light fitting, of capacity 70 watt with having high pressure die cast aluminium housing with sealed toughened glass cover suitable for pole mounting, protection IP66 including 2.5 sqmm copper cable three core for connection including taking down unserveciable LED Flood light of any type any capacity from pole/ site all as specified and directed. Make Havells, Phillips, wipro.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to credit complete with all fittings & valves etc complete all as specified and directed.

All as per description of item above but size 20mm bore.

All as per description of item above but size 25mm bore.

All as per description of item above but size 40mm bore.

All as per description of item above but size 50mm bore.

All as per description of item above but size 80mm bore.

All as per description of item above but size 100mm bore.

Ref fixing /relaying old steel tubing with new fittings and connecting in new or old positon including fittings of size 15 mm bore as required (in trenches, Walls ,Ceiling, Floors etc)

Ref fixing /relaying old steel tubing with new fittings and connecting in new or old positon including fittings of size 20 mm bore as required (in trenches, Walls ,Ceiling, Floors etc)

Ref fixing /relaying old steel tubing with new fittings and connecting in new or old positon including fittings of size 25 mm bore as required (in trenches, Walls ,Ceiling, Floors etc)

Ref fixing /relaying old steel tubing with new fittings and connecting in new or old positon including fittings of size 40 mm bore as required (in trenches, Walls ,Ceiling, Floors etc)

Ref fixing /relaying old steel tubing with new fittings and connecting in new or old positon including fittings of size 50 mm bore as required (in trenches, Walls ,Ceiling, Floors etc)

Ref fixing /relaying old steel tubing with new fittings and connecting in new or old positon including fittings of size 80 mm bore as required (in trenches, Walls ,Ceiling, Floors etc)

Ref fixing /relaying old steel tubing with new fittings and connecting in new or old positon including fittings of size 100 mm bore as required (in trenches, Walls ,Ceiling, Floors etc)

S&F of GI water tubing 15 mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches complete all as specified and as directed by Engr-in-Charge.

S&F of GI water tubing 20 mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches complete all as specified and as directed by Engr-in-Charge.

All as per description of item above but 25mm.

All as per description of item above but 40mm.

All as per description of item above but 50mm.

All as per description of item above but 80 mm.

All as per description of item above but 100 mm.

Supply & Fixing PTMT Ball valve with apoxy coated alluminium rod and high density plastic ball screwed for iron pipe 20 mm dia min wieght 210 gms.

S&F in replacement, gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 20 mm complete all as specified and directed by Engr-in-Charge.

S&F in replacement, gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 25 mm complete all as specified and directed by Engr-in-Charge.

S&F in replacement, gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 40 mm complete all as specified and directed by Engr-in-Charge.

S&F in replacement, gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 50 mm complete all as specified and directed by Engr-in-Charge.

Taking down old unsv old sluice valve and supply and fixing ball valve having SS ball with both CI end flanged, ISI marked, with nuts, bolts and washer and rubber gasket with stainless steel handle over PVC coating complete all as specified and directed for 80 mm bore pipecomplete all as specified and directed. Make - Zoloto/ Bir / BVI

Taking down old unsv old sluice valve and supply and fixing sluice valve cast iron ISI marked with flanged ends drilled with iron wheels head shuts and open direction cast on it class PN 1.6 confirming to IS 14846-2000 including necessary fixing arrengemet such as rubber insulation, packing rings, jointing materials nuts, bolts washer, gasket and packings material etc all as specified and directed for 100 mm dia complete all as specified and directed. Make - Zoloto/ Bir / BVI

Demolition of stone masonary built in cement/lime mortor complete all as specifried and directed.

M&L for walling of random rubble stone masonry uncoursed wall bonded built in cement mortor 1:6.

All as per item above but except stone.

M&L for rendering 10 mm thick in cement mortor 1:6 on stone masonary surfaces finished even and smooth.

M&L for PPC 1:3:6, C1, as in coping including necessary form work etc required with 20mm graded stone aggregate.

Supply and fixing of Angle iron/MS flat/MS sheet of required size and shape including cutting bending to the shape making holes, for valve pit cover, clamp, stay assembly etc with locking arrangement with two coat of black synthatic enamelled paint over a coat of red oxide primer all as specified and directed by Engr-in-Charge.

Supply only NRV and S&F CI reflex valve (NRV) with by pass arrangement suitable for 100mm dia size flanged joints complete Make : Kirloskar with nut bolt & washer confirming to IS-5312 PN 1.6 complete all as specifed and directed by Engr- in- charge.

Supply only NRV and S&F CI reflex valve (NRV) with by pass arrangement suitable for 80mm dia size flanged joints complete Make : Kirloskar with nut bolt & washer confirming to IS-5312 PN 1.6 complete all as specifed and directed by Engr- in- charge.

Supply only foot valve and Supply and fixing new CI foot valve flange ends Make : Kirloskar including nut bolt and washer confirming to IS 4038 of size 100mm dia

Supply only foot valve and Supply and fixing new CI foot valve flange ends Make : Kirloskar including nut bolt and washer confirming to IS 4038 of size 80mm dia

Lagging to pipes 15mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified.

Lagging to pipes 20mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified.

Lagging to pipes 25mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified.

Dewatering and taking out sludge from tank of size and capacity (10000 to 20000Gln), removing the same to a distance not exceeding 50m with & including, cleaning the sump by wire brushing including ,including brooming down complete incl white washing internally, complete all as directed by the Engr-in-charge.

Supplying, Hoisting and Fixing of Rotational moulded polyethylene water storage tank of capacity of 1000 litres (cuboidal or cylindrical as approved by Engineer-In-Charge) vertical with closed top), for hoisting into position either inside or outside of building, connecting up pipes, securing access covers etc., with monkey-proofing mechanism, hoisted and fixed in position Complete all as specified in SSR Part I.

Material and labour for taking out the submersible pump set and motor assembly of capacity 2 HP to 10 HP from the borewell, by taking out the column pipes with chain pulley block and tripod stand, complete using skilled and experienced labour and transporting the same to workshop for repair and replacement of worn impellers -01 set , replacement of worn out bushings and bearings and transport back repaired pump set back to site after repair and Lowering the same in the bore well after testing complete all as specified and directed by the Engr - in Charge.

Material and labour for rewinding of submersible motor upto 10 HP by taking out the burnt out winding from the strater with PVC insulated copper winding wire of same gauge and size as per existing, replacement of thrust bearing and bushes and testing complete all as specified and as directed by the Engr-in-Charge.

patriotic builders

M/s Sana Constrruction Co

Bidder Name

M/S S. D. BUILDERS

patriotic builders

M/s Sana Constrruction Co