Estimate for Repair and Renovation of Bathrooms of HO New Building Sec-18 Chandigarh

Amount

Dismantling glazed tiles (to be carefully removed)

Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC/China ware cistern, Wash Hand Basin, Urinal Pot, Sinksand CP Fittings and disposal of dismantled material within adistace of 100 mtr. Complete in all respect as required by Engineer-in-incharge.(a) Eurpoean/India/Orissa W.C.

Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC/China ware cistern, Wash Hand Basin, Urinal Pot, Sinksand CP Fittings and disposal of dismantled material within adistace of 100 mtr. Complete in all respect as required by Engineer-in-incharge. PVC/ China Ware cistern

Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC/China ware cistern, Wash Hand Basin, Urinal Pot, Sinksand CP Fittings and disposal of dismantled material within adistace of 100 mtr. Complete in all respect as required by Engineer-in-incharge. Wash Hand basin/Urinal pot

Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC/China ware cistern, Wash Hand Basin, Urinal Pot, Sinksand CP Fittings and disposal of dismantled material within adistace of 100 mtr. Complete in all respect as required by Engineer-in-incharge. CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap

Removing Doors and Windows (Steel or Wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (a) Doors of area 3 sqm and below.

Dismantling brick work tile, masonary or tile lining (in cement).

Dismantling cement conglomerate floors 25 mm to 50 mm thick including concrete base

1st class burnt brick laid in csm 1:4 in first story upto 4 mtr above plinth level

12.5 mm thick Cement Plaster 1:4

Cement Concrete 1:2:4 mixing by manual means

Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.

Cold twisted deformed (Ribbed/Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008,for RCC works,where not including in the complete rate of RCC including bending and placing in position complete

Chowkats of commercial hard wood such as Hollock confirming to ISI specifications no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position. Single rebate (60mm X 100 mm)

Providing and laying vitrified floor tiles of different sizes in light colour shades made using double charge technology (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand, complete. size 600mm X 600 mm

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy,

Waterproofing of wet areas (Concrete/Masonary surface) and any water retaining structures such as swimming pools, water tanks, Bathrooms, toilets, Balconies, planters etc with high performance polymer modified cementitionous coating (Dr. FIXIT FASTFLEX / Eqivalent ) to provide tough film build-up and highly elastic film formation, which accommodates thermal movements so as to provide seamless coating without any joints to prevents water leakage. The scope of work also includes surface preparation and cleaning, washing and removing dust, dirt and loose particles from concrete/masonary surface complete in all respects.

Providing and fixing in position chinaware Floor mounted one piece EWC type with matching chinaware cistern 10 litr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of Engineer-in- Charge. (b) Chinaware Floor mounted one piece EWC rim less type with matching chinaware cistern 10 litr. capacity. (without cistern fitting)

Providing and fixing in position viterous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. Brass waste 32 mm dia with one C.P. Brass pillar tap complete in all respect. Size 630 mm X 500 mm (above counter oval)

Providing and fixing in position viterous chinaware white senso urinal size 37 X 39 X 61 cm of approved make (to the approval of Engineer-in-charge) consisting of C.P brass urinal waste coupling dome type 32 mm outer length 75 mm complete in all respect.

Providing and fixing partition for different type of urinals. (iii) Toughened glass partition 8 mm thickness size 450 mm X 900 mm C/S

CONCEALED IN WALL: Providing and fixing chlorinated polyvinyl chloride pipes (CPVC) pipes as per IS 15778 (ISI marked with theprior approval of Engineer-in-charge), having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes and fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-charge

CPVC SDR 11 pipe and fitting 16 mm o/d

CPVC SDR 11 pipe and fitting 20 mm o/d

CPVC SDR 11 pipe and fitting 25 mm o/d

Cutting holes upto 23 cm square for pipes in flooring and roofs of bricks, tiles with lime concrete or cement concrete and making good including repointing, replastering and colour or white washing where required. (e)Through floor or roof 22.50 cm thick

Cutting chase in brick walls in cement or in floor for embedding G.I or C.I pipes lines and making good the same to its original condition.

Size 75mm X 76mm

Size 225mm X 225mm

Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes to I.S.I. 13592 of approved make (to the approval of EIC) including cutting, jointing, wastage but excluding cost of lead jointing. (b) 110 mm o/d single socket SWR UPVC pipelines laid complete

Providing and fixing in position SWR UPVC special for soil waste vent oranti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead jointing. For 110 mm o/d pipes:

Elbow 90 degrees

Reducer 110 mm X 75 mm

Coupler

P trap/Floor trap 110mm X 75mm

Providing and fixing in position SWR UPVC Soil waste vent or antisyphonage pipes to I.S.I. 13592 of approved make (to the approval of EIC) including cutting, jointing, wastage but excluding cost of lead jointing. (d) 75 mm o/d single socket SWR UPVC pipe lines laid complete

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc.cutting holes in walls roofs and floors etc. and making good to its original condition but excluding cost of lead jointing. For 75 mm o/d pipes:

Single Tee

Elbow 90 degree

Coupler

P Trap/Floor trap 75mm X 75mm

Providing and laying, jointing, fixing and testing ISI marked uPVC Pipe lines as per ISI 4985-2000, includng specials such as tees,bends,socket, elbow etc., cutting, testing (including cost of specials) in th ground complete in all respects. uPVC Pipe 6kgf/cm2

Providing and fixing in position C.P.Brass Auto close pillar cock of approved make (to the approval of Engineer-in-charge)

Providing and fixing in position stop cock/angle valve (as approved by the Engineer-in-charge). (c) C.P. Brass 15 mm Angle valve

Providing and fixing in position C.P. brass tube connection braided SS304 of approved make (to the approval of Engineer-in-charge) complete in all respect. CP Brass Flexible tube Connection Braided SS304 of size 15 mm X 600 mm Long

Providing and fixing in position C.P. Brass extension piece 15 mm dia, 15 mm long or 25 mm long or 50 mm long with various fixtures complete in all respects (as required by the Engineer-in-chief). C.P.Brass extenson piece, 25 mm long to 50mm long

Providing and fixing in position C.P.brass bottle trap 32 mm dia with 40mm seal of approved make (to the approval of Engineer-in-charge) complete in all respect.

Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge) fixed in to wall with C.P.Brass screws complete in all respect. C.P.Brass toilet paper holder

Providing and fixing in position liquid soap continer of approved make (to the approval of engineer-in-charge) complete in all respect. Acrylic Liquid soap container

Providing and fixing in position towel rails/ring of approved make (to the approval of Engineer-in-Charge) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. C.P. brass towel rails size 15 mm dia 610 mm long

Providing and fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4 mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S studs on topcomplete in all respects (as required by the Engineer-in-charge). Size 1500 mm X 600mm or any other size

Providing and laying polished granite stone 18mm thick flooring in required design and patterns,in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20mm (average) thick bas of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc.all complete as specified and as directedby the Engineer-in-charge

Providing opening of required size and shape for wash basin/kitchen sink in kitchen platform,vanity counter and similar location in marble/granite/stone work,including necessary holes for pillar taps etc. includig rubbing,molding and polishing of cut edges etc. complete

Providing and fixing glass panes with nails and putty or wooden strip complete in all respect. b) Glazing area above 0.09 sqm. (iii) 5.0mm thickplate glass (INDIAN) washroom window

Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but inculding the labour for fixing the same in position (c) Decorativewith teak facing on both sides edges lipped with teak with laminated core 35 mm thick

Providing and fixing bright finished brass 100mm mortise latch and lock with 6 livers and a pair of lever handles withnecessary screws etc. complete (best make of approved quality)

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete I.S.I.Designation No. III (size of door 851 mm to 1000 mm)

Providing and fixing of knobset made of stinless steel body, having provision of latch and bolt, 3 nos key set, inside push lock model ETL-101 A,Finish SS/PB/AB make-Enox or any equivalent (Lock should be releasable from outside in case of emergency)as per requirement for unisextoilet for PwD complete as per specifications, Harmonised guidlines for PwD and as desired by Engineer-in-charge

Cost of aluminium fittings complte for doors, windows such as toxer bolts,handles, stoppers and screw etcfor these fittings (excluding sliding bolt) (i) For shutter area upto 0.50 sqm

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq.mm, 1100 volts grade to be laid in heavy gauge PVC conduit pipe 20mm/25 mm dia.(ISI marked) recessed in wall etc.,complete with powder coated/anodized concealed metalboxes (1.6 mm thick with brass lugs) required for suitable number of modules (Modular accessories)for having step type electronic fan regulators (two module) 100 watts,bell push,6 amp. 2/3 universal socket (shuttered), 16/20 Amp.combined/universal socket shuttered,6/10 Amp.switches, 16/20 amp. switches with indicator etc. and covered with frame plate etc., PVC connector(For Fax Box and Call bell), Steel hooks,Sheet metalfan box (1.6 mm thick shape hexagonal),Circular junction boxes (Four way PVC 1.5" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sqmm,1100 volts grade (For 6Amp.wall socket & plug control point) and other petty materialetc., including the cost of above material, cutting and filling upof chases (with finishing the surface)

(i) a wiring fan point (without fan box)

(ii) Wiring light point.

(iv)Wiring 6 amp. Wall socket point

(iv)Wiring light point with double control switches

REPLACEMENT OF WIRES, COVER FRAMES, MODULAR SWITCHES, CONCEALED METAL BOXES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIP WIRING SYSTEM (WITH MODULAR TYPE ACCESSORIES

(i) a wiring fan point (without fan box)

(ii)Wiring light point

(iv)Wiring 6 amp. Wall socket point

(vi)Wiring 16/20 Amp. Power plug control point

Providing and fixing ceiling at height upto 4 mtr.consisting of 12.5 mm thick gypsumboard of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings, specifications and to the entire satisfaction of Engineer-in-charge

Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acrylic wall putty by applying 2 or more coats to get required finish including priming coat tomake an even surface before applying Acrylic wall putty on new plastered surface. Complete as per specifications

Wall painting with (bio grade) plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) generally used in hospital buildings etc complete as per specifications

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to IS:730 and IS:1285 of Jindal, Hindalco, Mahaveer or equivalent make approved by Engineer-in-Charge, fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sided with reqired PVC plug/neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleet angle,aluminium snap beading for glazing,panelling, C.P. brass/stainless steel screws,ll complete as per architectural drawings and the directions of Engineer-in-Charge (glazing and panelling to be paid for separately)

(a) For fixed portion and chowkhats

(b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC plug/neoprene gasket required

Providing and fixing glazing in aluinium door, window, ventilator, shutters and partitions etc. with PVC plug/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(cost of aluminium snap beading shall be paid in basic item) Float glass panes of 5 mm thickness

Applying pink primer or aluminiumpriming coat on wood work including preparation of surface knotting and stopping etc.

Painting two or more coats with synthetic enamel paints inall shades on old wood work or metallic or plastered or concrete surface togive an even shade including rubbing down old paint

Providing and fixing vanity with marble top for counter top wash basin complete in all respect

6" dia LED ceiling lights round (electric LED)

8" Exhaust fan (exhaust fan 200mm)

Providing and installation of window blinds (size 3.5'X5')

Providing and fixing ACP sheets of various thickness high class ISI marked complete in all respect as per the directions of Engineer-in-charge.(i) 6 mm thick ACP sheet

AMBEY CONSTRUCTIONS (BID ID -684737)

GARG BUILDERS (BID ID -684753)